Results for “personal mobility” — Page 3

DOE OSTI2024

Investigation of Ammonia Carrier Materials for Next Generation Ammonia Dosing System - CRADA 334 (Abstract)

Lean-burn gasoline and diesel engines can offer substantially higher fuel efficiency, good driving performance, and reduced carbon dioxide emission compared to stoichiometric gasoline engines. Various catalyst technologies have been developed to remove the pollutants from these engines. For example, a three-way catalyst (TWC) is used to remove hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx) from gasoline engines during the stoichiometric conditions. During the lean-burn conditions, a TWC or a diesel oxidation catalyst (DOC) is used to control HC and CO emissions. NOx is removed by either lean NOx trap catalyst (LNT) that can store NOx under lean conditions and reduce NOx under rich conditions, or selective catalytic reduction catalyst (SCR) that can selectively remove NOx with a reducing agent. Among the NOx reduction catalyst technologies, SCR offers a number of advantages, including excellent NOx reduction efficiency over a wide range of temperatures and overall lower system cost. In fact, the SCR technology using ammonia (NH3) as reductant has been proven effective and used commercially for the removal of NOx emissions from stationary sources since the 1970s. Currently, SCR is being used to meet the NOx emission standards for diesel engines in Europe and North America, and also being considered for meeting the future NOx emission standards for lean-burn gasoline engines. Because of the challenges associated with storage, handling and transportation of ammonia on a vehicle, aqueous urea solution (e.g., Diesel Exhaust Fluid, AdBlue) has been developed as ammonia storage compound for mobile applications. When the aqueous urea solution is sprayed into exhaust gas stream, urea is decomposed to release ammonia, which then reduces NOx over the downstream SCR catalyst. Although aqueous urea solution technology has enabled automakers and engine manufacturers to meet the current NOx emission standards, this process of releasing ammonia requires a hot exhaust gas and sufficient mixing, creating challenges for low temperature NOx emission control and aftertreatment system packaging. For these reasons, alternative technologies have been developed as ammonia sources (e.g., solid urea, ammonium carbamate, metal ammine chloride) during the past few years. These technologies promise more convenient handling and distribution of ammonia sources, and help maximize the low-temperature performance of SCR catalysts and reduce the overall system volume and weight. However, none of these alternative technologies can be successfully implemented without the industry consensus. Therefore, the USCAR SCR work group, which is comprised of representatives from GM, Ford, and Chrysler, has decided to investigate the potential alternative ammonia carriers, define common standard vehicle interfaces, and address personal and environmental safety concerns with part suppliers and chemical companies. Under this CRADA Project, USCAR and Battelle will investigate alternative ammonia carrier materials that are currently under development. Based on the data and information derived under the CRADA project, the USCAR SCR work group plans to build the consensus and make recommendations for the industry.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2024

Investigation of Ammonia Carrier Materials for Next Generation Ammonia Dosing System - CRADA 334 (Abstract)

Lean-burn gasoline and diesel engines can offer substantially higher fuel efficiency, good driving performance, and reduced carbon dioxide emission compared to stoichiometric gasoline engines. Various catalyst technologies have been developed to remove the pollutants from these engines. For example, a three-way catalyst (TWC) is used to remove hydrocarbons (HC), carbon monoxide (CO), and nitrogen oxides (NOx) from gasoline engines during the stoichiometric conditions. During the lean-burn conditions, a TWC or a diesel oxidation catalyst (DOC) is used to control HC and CO emissions. NOx is removed by either lean NOx trap catalyst (LNT) that can store NOx under lean conditions and reduce NOx under rich conditions, or selective catalytic reduction catalyst (SCR) that can selectively remove NOx with a reducing agent. Among the NOx reduction catalyst technologies, SCR offers a number of advantages, including excellent NOx reduction efficiency over a wide range of temperatures and overall lower system cost. In fact, the SCR technology using ammonia (NH3) as reductant has been proven effective and used commercially for the removal of NOx emissions from stationary sources since the 1970s. Currently, SCR is being used to meet the NOx emission standards for diesel engines in Europe and North America, and also being considered for meeting the future NOx emission standards for lean-burn gasoline engines. Because of the challenges associated with storage, handling and transportation of ammonia on a vehicle, aqueous urea solution (e.g., Diesel Exhaust Fluid, AdBlue) has been developed as ammonia storage compound for mobile applications. When the aqueous urea solution is sprayed into exhaust gas stream, urea is decomposed to release ammonia, which then reduces NOx over the downstream SCR catalyst. Although aqueous urea solution technology has enabled automakers and engine manufacturers to meet the current NOx emission standards, this process of releasing ammonia requires a hot exhaust gas and sufficient mixing, creating challenges for low temperature NOx emission control and aftertreatment system packaging. For these reasons, alternative technologies have been developed as ammonia sources (e.g., solid urea, ammonium carbamate, metal ammine chloride) during the past few years. These technologies promise more convenient handling and distribution of ammonia sources, and help maximize the low-temperature performance of SCR catalysts and reduce the overall system volume and weight. However, none of these alternative technologies can be successfully implemented without the industry consensus. Therefore, the USCAR SCR work group, which is comprised of representatives from GM, Ford, and Chrysler, has decided to investigate the potential alternative ammonia carriers, define common standard vehicle interfaces, and address personal and environmental safety concerns with part suppliers and chemical companies. Under this CRADA Project, USCAR and Battelle will investigate alternative ammonia carrier materials that are currently under development. Based on the data and information derived under the CRADA project, the USCAR SCR work group plans to build the consensus and make recommendations for the industry.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2026

Ride Pingo to Transit

In this project, we developed an on-demand microtransit first- and last-mile service. To integrate the service with fixed-route transit, we developed a feature called Transit Connect that prioritized riders’ on-time arrival at the transit station over other service requirements. We first prototyped service and related algorithms in a simulated environment, and then piloted the service in the city of Kent, Washington. Our algorithm incorporates request-specific hard drop-off deadlines to ensure timely arrivals for transit transfers. In the pilot, these constraints were obtained from GTFS Realtime data to accurately determine the schedule of the transit and the location of the stations. This approach introduced the ability to accept or decline new requests based on the timing of transit connections for these new requests and connection status of onboarding customers. The pilot (called “Ride Pingo to Transit”) deployed a fleet of three 14-person vans, ran from September 2021 to March 2023, and served a total of 21,329 trips. Transit Connect was offered for drop-offs at both Kent Station and the Kent Valley hub. In total, 2,844 such trips were completed. This dataset was collected from our pilot, which includes the following: - Requests: List of all trip requests, including those that were actually served and those not materialized. - Fleet: Daily vehicle service logs. - Service details: Daily vehicle stop logs (boarding and alighting). - Trip types: First mile, last mile, or point-to-point. ![pingo to transit](pingo-to-transit.jpg)

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2024

Agent-based simulations of shared automated vehicle operations: reflecting travel-party size, season and day-of-week demand variations

Here, this paper explores the effects of day of week and season of year demand variations for shared rides, along with realistic travel party sizes, on shared autonomous vehicle (SAV) services across the Austin, Texas region. Using the agent-based POLARIS program, synthetic person-trips that reflect travel-party size (from one to four persons) and demand variations over days and months, as evident in the National Household Travel Survey data were simulated in each scenario over a 24 h travel day. Results show that realistic party sizes can bring considerable changes to SAV fleet performance, including up to 8.5% higher service rates (number of requests accepted within 15 min), 5 min shorter journey times (wait time + travel time), 28% higher vehicle occupancies on weekends, and roughly 4% lower empty fleet VMT. Weekend travel is most impacted by season of year, with weekday travel patterns looking more uniform (thanks to work and school trips). Various performance metrics for the Austin network, like total and empty VMT, change by up to 30% when considering realistic variations in party size and time of year. This paper underscores the value of recognizing day-to-day and month-to-month variations in travel demand, and the importance of agent-based model equations to reflect travel-party size. Such realism can help quantify SAV seat occupancies more accurately, highlighting the importance of shared mobility. However, it also creates demand and supply issues for operators that now need more information on party size to manage dynamic ride-sharing, or those that may wish to shift their fleet vehicles to other regions for special events to protect profits while offering reasonable wait times to customers throughout the year.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

Factors Influencing Adoption of Pooled Rideshare An Explorative Study on User-Centered Design and Services

The rise of real-time information communication through smartphones and wireless networks enabled the growth of ridesharing services. While personal rideshare services (individuals ride alone or with people they know) initially dominated the market, the popularity of pooled ridesharing (individuals share rides with strangers) has grown globally. However, pooled rideshare remains less common in the U.S., where personal vehicle usage is still the norm. Vehicle design and rideshare services may need to be tailored to user preferences to increase pooled rideshare adoption. A national U.S. survey ( N = 5,385) used exploratory and confirmatory factor analyses to identify four key factors influencing riders’ willingness to consider pooled rideshare: comfort/ease of use, convenience, vehicle technology/accessibility, and passenger safety. Understanding and implementing these user-centered design principles and service-related factors may be critical for increasing the future use of pooled rideshare services

Gangadharaiah, Rakesh↗

DOE OSTI1991

Nuclear Safety [Vol. 32, No. 4, October-December 1991]

Nuclear Safety is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated. Table of Contents for this issue follows. GENERAL SAFETY CONSIDERATIONS: 477 Report on the International Symposium on the Use of Probabilistic Safety Assessment for Operational Safety—PSA '91, S. Chakraborty and M. Khatib-Rahbar; 488 Good Relationships Are Pivotal in Nuclear Data Bases, A. S. Heger and B. V. Koen; 494 Technical Note: The Interagency Nuclear Safety Review Panel's Evaluation of the Ulysses Space Mission, J. A. Sholtis, Jr., D. A. Huff, L. B. Gray, N. P. Klug, and R. O. Winchester; ACCIDENT ANALYSIS: 502 The Severe Accident Analysis Program for the Savannah River Nuclear Production Reactors, M. L. Hyder; CONTROL AND INSTRUMENTATION: 511 A Framework for Selecting Suitable Control Technologies for Nuclear Power Plant Systems, R. A. Kisner; DESIGN FEATURES: 521 Containments for Gas-Cooled Power Reactors History and Status, P.W. Williams; ENVIRONMENTAL EFFECTS: 537 Indoor Radon: A Natural Risk, N. H. Harley and J.H. Harley; On the Importance of the Atmospheric Parameters in the Fission Products Distribution of a Severe Reactor Accident, M. C. Barla and A. R. Bayulken; Book Review: Health Effects of Exposure to Low Levels of Ionizing Radiation BEIR V, C. R. Richmond; WASTE AND SPENT FUEL MANAGEMENT: 555 Activities Related to Waste and Spent Fuel Management, M. D. Muhlheim and E. G. Silver OPERATING EXPERIENCES: 567 Effects of Component Aging on the Westhinghouse Control Rod Drive System, K. Sullivan and W. Gunther; 577 Reactor Shutdown Experience, Compiled by J. W. Cletcher, 580 Selected Safety-Related Events, Compiled by G. A. Murphy; 582 Operating U 8 Power Reactors, Compiled by M. D. Muhlheim and E. G. Silver, RECENT DEVELOPMENTS: 596 General Administrative Activities, Compiled by M. D. Muhlheim and E. G. Silver; 610 Reports, Standards, and Safety Guides, D. S. Queener; 614 Proposed Rule Changes as of June 30, 1991; ANNOUNCEMENTS: 520 Workshop on PC PRAISE: A Probabilistic Fracture Mechanics Personal Computer Code for Nuclear Power Plant Piping Reliability Assessment; 536 Fifth Workshop on Nuclear Power Plant Containment Integrity; 624 New OECD "International Information System on Occupational Exposure (ISOE)"; 625 Harvard School of Public Health Announces Short Courses; 625 Eighth Power Plant Dynamics, Control and Testing Symposium; 626 Second Training Course on Off-Site Emergency Planning and Response for Nuclear Accidents; 618 The Authors; 622 Reviewers of Nuclear Safety, Vol 32.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Computational and Experimental Investigation of Thermal-Mechanical- Chemical Mechanisms of High-burnup Spent Nuclear Fuel (SNF) Processes at Elevated Temperatures and Degradation Behavior in Geologic Repositories

The overarching goal of the combined computational and experimental R&D activities proposed in this project is to enhance understanding of the mechanisms and thermal-mechanical-chemical (TMC) parameters controlling the instant release fraction (IRF) and matrix dissolution of high-burnup (HB; burnup) spent nuclear fuels (SNFs) and the subsequent formation, stability, and phase transformations of SNF alteration products under long-term storage and geological disposal conditions. Uranium dioxide may undergo oxidative corrosion/alteration, and the IRF may be increased for HB SNF, both of which may affect environmental systems associated with SNF long-term storage and disposal. The oxidative matrix dissolution may form various complex uranyl-based phases, including a rich variety of oxides, silicates, carbonates and other secondary minerals in varied geological environments (e.g., studtite, metastudtite, amorphous uranyl peroxide, uranium trioxide, triuranium octoxide, schoepite, dehydrated schoepite, metaschoepite, becquerelite, soddyite, rutherfordine,...). These uranyl phases generally have higher mobility UO 2 +2 species than less soluble U 4+ phases. However, limited information on the thermodynamic properties and formation kinetics of these uranyl-bearing phases is available to predict explicitly paragenesis under the conditions relevant to long-term storage or disposal. The proposed project draws on complementary expertise and research backgrounds from the team members: (i) to apply a combined ab initio modeling (UNLV/UTEP and SNL) and experimental (UNLV) strategy investigating the high-temperature TMC mechanisms of alteration of SNF under α-radiolysis conditions; (ii) to investigate the mechanistic of phase transformations in UNF degradation products under various conditions expected in long-term storage systems (e.g. (UO 2 )O 2 (H 2 O) 4 → (UO 2 )O 2 (H 2 O) 2 → U 2 O 7 → UO 3 → U 3 O 8 ); (iii) to determine high-accuracy TMC parameters for complex uranyl-based phases formed in storage or geological disposal environments (e.g. UO 3 (H 2 O) 2 , Ca[(UO 2 ) 6 O 4 (OH) 8 ] 8 H 2 O, (UO 2 ) 2 (SiO 4 ) 3 2H 2 O,…). The unforeseen COVID-19 pandemic led to the laboratory/campus closure since March 2020, that resulted in a significant delay in reaching milestones in a satisfactory manner, due to (i) the statewide recommendation from stop-working to later limited work in the lab and work-from-home (WFH), (ii) no in-person interactions, and (iii) a hiring freeze at UNLV. Therefore, a no cost extension (10/01/2021- 9/30/2022) was requested to help make up the time we lost during the global pandemic in 2020-2021, leading to paradigm shifts in the focus of the project in the following three main tasks: Task 1 (Computational), Task 2 (Experimental), and Task 3 (Final report, due on 12/29/2022).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Pooled Rideshare in the U.S.: An Exploratory Study of User Preferences

Pooled ridesharing offers on-demand, one-way, cost-effective transportation for passengers traveling in similar directions via a shared vehicle ride with others they do not know. Despite its potential benefits, the adoption of pooled rideshare remains low in the United States. This exploratory study aims to evaluate potential service improvements and features that may increase users’ willingness to adopt the service. The study analyzed transportation behaviors, rideshare preferences, and willingness to adopt pooled rideshare services among 8296 U.S. participants in 2025, building on findings from a 2021 nationwide survey of 5385 U.S. participants. The study incorporated 77 actionable items developed from the results of the 2021 survey to assess whether addressing specific user-generated topics such as safety, reliability, convenience, and privacy can improve pooled rideshare use. A side-by-side comparison of the 2021 and 2025 data revealed shifts in transportation behavior, with personal rideshare usage increasing from 22% to 28%, public transportation from 21% to 27%, and pooled rideshare from 6% to 8%, while personal vehicle (79%) use remained dominant. Participants rated features such as driver verification (94%), vehicle information (93%), peak time reliability (93%), and saving time and money (92–93%) as most important for improving rideshare services. A pre-to-post analysis of willingness to use pooled rideshare utilizing the actionable items as per respondents’ preferences showed improvement: “definitely will” increased from 15.9% to 20.1% and “probably will” rose from 35.6% to 47.7%. These results suggest that well-targeted service improvements may meaningfully enhance pooled rideshare acceptance. This study offers practical guidance for Transportation Network Companies (TNCs) and policymakers aiming to improve pooled rideshare as well as potential future research opportunities.

Transportation Network Companies (TNCs)↗

DOE OSTI2023

A User-Centered Design Exploration of Factors That Influence the Rideshare Experience

The rise of real-time information communication through smartphones and wireless networks enabled the growth of ridesharing services. While personal rideshare services (individuals riding alone or with acquaintances) initially dominated the market, the popularity of pooled ridesharing (individuals sharing rides with people they do not know) has grown globally. However, pooled ridesharing remains less common in the U.S., where personal vehicle usage is still the norm. Vehicle design and rideshare services may need to be tailored to user preferences to increase pooled rideshare adoption. Based on a large, national U.S. survey (N = 5385), the results of exploratory and confirmatory factor analyses suggested that four key factors influence riders’ willingness to consider pooled ridesharing: comfort/ease of use, convenience, vehicle technology/accessibility, and passenger safety. A binomial logistic regression was conducted to determine how the four factors influence one’s willingness to consider pooled ridesharing. The two factors that positively influence riders’ willingness to consider pooled ridesharing are vehicle technology/accessibility (B = 1.10) and convenience (B = 0.94), while lack of passenger safety (B = –0.63) and comfort/ease of use (B = –0.17) are pooled ridesharing deterrents. Understanding user-centered design and service factors are critical to increase the use of pooled ridesharing services in the future.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2023

Alternative Fuel Vehicle Usage and Owner Demographics in New York State

With mounting concerns over climate change and the environmental impact of fossil fuels, the United States has witnessed a growing interest in alternative fuel vehicles (AFVs). In 2021, approximately 1.5 million battery EVs (BEVs), 0.8 million plug-in hybrid EVs (PHEVs), and 5.5 million hybrid EVs (HEVs) were registered in the United States. In the state of New York, a total of 51,900 BEVs, 44,600 PHEVs, and 221,600 HEVs were registered in 2021. The current report presents the results of an analysis of AFV adoption patterns in New York State and the rest of the United States based on data from the 2017 National Household Travel Survey (NHTS). Overall, the report reveals the demographics and mobility factors (e.g., household income, homeownership, and trip length) that contribute to the adoption of AFVs. This study provides insights that can inform policy decisions aimed at promoting sustainable transportation solutions.The 2017 NHTS data showed that the percentage of households owning at least one AFV is lower in New York City compared with that in other regions of New York State. From the NHTS samples, of the 25 households that owned at least one BEV in New York State, 15 households (60%) lived within a 5-mile radius, based on the great circle distance, of the nearest charging station, and 23 households (92%) lived within a 10-mile radius of the nearest charging station. Furthermore, among the 40 households in New York State that own at least one PHEV, 48% (19 households) lived within a 5-mile radius of the closest EV charging station, and 83% (33 households) lived within a 10-mile radius of the nearest charging station. The rest of the United States had a higher percentage of households that own at least one AFV compared with that of New York State. A comparison was made between EV adoption levels using NHTS and EValuateNY, which is a tool that gathers statistics on the electric car market in New York State. The estimates obtained from New York State household samples in NHTS were slightly lower than the data provided by EValuateNY. In New York State and the rest of the United States, households with higher incomes tended to have a higher proportion of AFV ownership compared with those with lower incomes. For example, households in New York State earning $\$ $150,000 or more had an approximately 6% share of owning at least one AFV, which was markedly higher than those earning less than $\$ $100,000 (less than 3%). Additionally, homeowners in New York State and the rest of the United States also exhibited a significantly higher share of AFV ownership compared with that of renters. In New York State, households that own at least one AFV tended to travel farther and had longer travel times compared with their counterparts without an AFV. In terms of households with at least one AFV, households with HEVs tended to have more person trips, longer person miles of travel, and more vehicle miles traveled, resulting in longer travel times than that of households with BEVs or PHEVs. Notably, households with AFVs had a slightly lower share of family and personal business trips but a higher share of social and recreational trips compared with households without AFVs. Additionally, households with at least one AFV tended to have a slightly higher share of walking trips than their counterparts without an AFV. However, the comparisons were not statistically significant. These travel patterns observed in New York State were consistent with those observed in other regions of the United States.

33 ADVANCED PROPULSION SYSTEMS↗