Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “partial observation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Characterization of Recrystallized Grains During Static Recrystallization of Hot-Compressed Mg–Zn–Ca Alloys Using In Situ Far-Field High-Energy Diffraction Microscopy

In this study, we explored the effect of Zn content on the static recrystallization of three 80 pct hot-compressed alloys, Mg–0.5Zn–0.1Ca wt pct (ZX050), Mg–1Zn–0.1Ca wt pct (ZX10), and Mg–3.2Zn–0.1Ca wt pct (ZX30), using far-field high-energy microscopy (ff-HEDM). Individual recrystallized grains were tracked and their 3D centroid, relative volume, and grain-averaged crystallographic orientation were measured during annealing. These measurements were used to compare the recrystallization kinetics and texture evolution of recrystallized grains in ZX alloys as a function of the Zn content. Fully recrystallized microstructures were observed for the ZX30 and the ZX10 alloys after annealing at 230 °C and 330 °C, respectively. In contrast, only a partially recrystallized microstructure for the ZX050 alloy was observed after > 1 hour of annealing at 430 °C. The resistance to recrystallization with decreasing Zn content was also confirmed by detecting faster growth rates of recrystallized grains in the ZX10 and ZX30 alloys, and slower growth rates in the ZX050 alloy. The significant recrystallization texture weakening of the ZX10 and ZX30 alloys and the development of a basal texture in the ZX05 alloy were described based on the orientation dependency of nucleation and growth of recrystallized grains. The analysis demonstrated that texture weakening was associated with increasing Zn content in Mg–Zn–Ca alloys.

Roumina, Reza [Univ. of Michigan, Ann Arbor, MI (U↗
DOE OSTI2026

A coupled hydrologic-agroeconomic modeling framework to evaluate adaptive irrigation strategies under groundwater withdrawal restrictions

Growing groundwater scarcity requires integrated tools to capture interactions among hydrology, agricultural production, markets, and land use. This study presents an iterative modeling framework that couples hydrologic, crop-yield, and economic models to capture two-way feedback among water availability, agricultural production, and market responses under groundwater constraints. The primary goal of this paper is to describe the methodological development of the coupled framework and demonstrate the significance of iterative model interaction. Applied to the western United States, we evaluated adaptive responses to restricting groundwater use beyond recharge levels, represented through changes in irrigation management and expansion or shrinkage of crop markets through land reallocation. Results demonstrate that the iterative coupling converges to stable equilibrium responses within 10 iterations. At equilibrium, deficit irrigation emerges as the dominant adaptation strategy in California, with irrigation levels stabilizing at approximately 70% of full irrigation demand, while Arizona and New Mexico experience stronger yield sensitivities. Early iterations produce commodity price increases of up to 10% for fruit and vegetable crops; however, these responses moderate as land allocation and production patterns adjust across regions. Deficit irrigation and spatial reallocation of irrigated land partially offset production losses, with variability observed across different states: California maintains yields primarily via deficit irrigation, whereas Arizona and New Mexico will rely mainly on reducing irrigated area to absorb the shock. By capturing feedback between biophysical and economic processes, this approach highlights how irrigation strategies and land-use decisions evolve under water stress and provides a transferable platform for evaluating water management policies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Design of novel refractory equiatomic multi-principal elemental alloys based on Mo-Nb-Ti system for Gen IV reactor applications

Excellent irradiation damage resistance demonstrated by multi-principal elemental alloys (MPEAs) has sparked significant interest among researchers, prompting exploration into their vast compositional space, to validate their suitability for nuclear applications. A combined approach of thermodynamic and empirical parameters calculations alongside CALPHAD (CALculation of PHAse Diagrams) for phase formation predictions enable high-throughput material selection for sophisticated applications like nuclear, overcoming laborious and time-consuming experiments. Key thermodynamic and empirical parameters for eight novel equiatomic MPEAs, based on seven low thermal neutron cross section refractory elements, for predicting phase formation were calculated, and equilibrium and non-equilibrium simulations in CALPHAD were employed to comprehensively model the systems. Pseudo binary phase diagram simulations showed that Zr, V or equiatomic CrV additions to the base MoNbTi alloy (MoNbTi-Zr, MoNbTi-V and MoNbTi-CrV alloys) favor the formation of isomorphous body-centered cubic (BCC) phase at high temperatures, while Cr, Al, equiatomic ZrV, or equiatomic CrAl additions (MoNbTi-Cr, MoNbTi-Al, MoNbTi-ZrV or MoNbTi-CrAl alloys) limit the solubility of them. Equilibrium CALPHAD simulations at 750 oC were consistent with XRD results on MoNbTi, MoNbTiZr and MoNbTiCr alloys, and partially for others. Notably, elemental segregation observed in the backscattered electron (BSE) scanning electron microscopy (SEM) images of the alloys was accurately simulated through non-equilibrium Scheil solidification calculations in CALPHAD, further verified by experiments. The precipitation of TiCr2 Laves phase in Cr containing MoNbTiCr and MoNbTiCrAl was accurately predicted while discrepancies were noted in MoNbTiCrV. The equilibrium simulations also provided insights into phase compositions at specific temperatures offering a pathway for tailoring the desired microstructure and properties of these systems. Empirical parameters calculations successfully predicted random solid solution in the base MoNbTi alloy, and with an exception in MoNbTiV and MoNbTiAl, predicted intermetallic precipitation in the rest, especially, Laves phase precipitation in Cr containing alloys.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Anomalous Landau Level Gaps Near Magnetic Transitions in Monolayer WSe 2

First-order phase transitions produce abrupt changes to the character of both ground and excited electronic states. Here we conduct electronic compressibility measurements to map the spin phase diagram and Landau level (LL) energies of monolayer WSe 2 in a magnetic field. We resolve a sequence of first-order phase transitions between completely spin-polarized LLs and states with LLs of both spins. Unexpectedly, the LL gaps are roughly constant over a wide range of magnetic fields below the transitions, which we show reflects spin-polarized ground states with opposite spin excitations. These transitions also extend into compressible regimes, with a sawtooth boundary between full and partial spin polarization. We link these observations to the important influence of LL filling on the exchange energy beyond a smooth density-dependent contribution. Our results show that WSe 2 realizes a unique hierarchy of energy scales where such effects induce reentrant magnetic phase transitions tuned by density and magnetic field. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Denudation, solute export, landscape evolution modeling, and geographic information system data for the East River watershed, Colorado, USA (2020-2024)

This data package contains geographic information system (GIS) layers and tabular datasets associated with the study of lithologic controls on denudation, solute export, carbon-scaling relationships, and transient landscape evolution in the East River watershed near Crested Butte, Colorado, USA. The package includes GIS layers used to produce the Figure 2 map, including drainage, hillshade, lithology, sample locations, and basin polygons, together with comma-separated value (CSV) tables and matching CSV data dictionaries. One group of tables reports sample-level and catchment-level information for river-sediment samples analyzed for in situ-produced cosmogenic beryllium-10 (10Be), including sample names, outlet elevations, geographic coordinates, upstream drainage area, rock-type classes, production-rate scaling scheme, analyzed nuclide, catchment-averaged denudation rates, and associated lower and upper analytical uncertainties. Sample and catchment attributes provide the basis for comparing denudation rates across intrusive, shale, sedimentary, and mixed-lithology settings. A second group of tables reports supporting information for landscape-evolution modeling and the mapped geologic framework of the study area. Included files list parameter values and definitions for the two-phase landscape-evolution simulations, summarize full-domain model erosion fluxes and topographic metrics for different simulation configurations, provide a fixed-area carbon-model scaling table, and summarize mapped geologic units within the East River study domain, including geologic code, formation name, lithologic description, mapped area, and lithologic class grouping. Model outputs and geologic summaries support interpretation of transient landscape behavior and its relation to the mapped distribution of shale, intrusive, sedimentary, and surficial units. A third group of tables reports hydrologic and hydrochemical information used to quantify dissolved export from the watershed. Included files provide site-level values for drainage area, mean annual solute export, standard error of annual export, area-normalized solute yield, and equivalent weathering rate for five East River monitoring sites, along with metadata describing the number, sampling cadence, and date range of discharge records and partial and full total dissolved solids observations used in the solute-yield analyses. The package also contains a supplementary daily ion-load time series with daily mean discharge, discharge observation counts, dissolved concentrations, and daily loads for calcium, magnesium, sodium, potassium, chloride, sulfate, nitrate, fluoride, dissolved silica, charge-balance bicarbonate, and total dissolved solids. The package contains GIS files, comma-separated value files (.csv), CSV data dictionaries, a file-level metadata table, a package-tree text file, and a readme text file.

10Be↗
DOE OSTI2024

First high-resolution γ-ray spectroscopy of 41 Si

The first high-resolution in-beam γ -ray spectroscopy is reported for the neutron-rich nucleus 41 Si, a tenant of the N = 28 island of inversion. Excited states were populated in the direct one-proton removal reaction from 42 P projectiles and pn removal from 43 P. Seven γ-ray transitions were observed, only one of which had been reported previously in the literature. Furthermore, this makes 41 Si the most neutron-rich odd-even N = 27 isotone with high-resolution excited-state information. For the one-proton removal, the measured partial cross-section distribution to all observed bound final states is contrasted with results from direct one-proton removal calculations that combine eikonal reaction dynamics with SDPF-MU shell-model spectroscopic factors and assume various possible initial states for the poorly known 42 P projectile. Rather distinct calculated cross-section distributions emerge that, in comparison to the new data, imply that the initial state in 42 P is most likely 3 – or 2 – rather than 1 – or 0 – , the predicted shell-model ground state of 42 P. It is further shown that the level scheme from the novel VS-IMSRG calculation closely agrees with the one of SDPF-MU, the most successful phenomenological shell-model effective interaction in describing the much discussed neighboring isotope 42 Si, perhaps cross-validating these complementary approaches on the quest to model rapid shell evolution away from the valley of β stability.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Structure and Interactions of HIV-1 gp41 CHR-NHR Reverse Hairpin Constructs Reveal Molecular Determinants of Antiviral Activity

Engineered reverse hairpin constructs containing a partial C-heptad repeat (CHR) sequence followed by a short loop and full-length N-heptad repeat (NHR) were previously shown to form trimers in solution and to be nanomolar inhibitors of HIV-1 Env mediated fusion. Their target is the in situ gp41 fusion intermediate, and they have similar potency to other previously reported NHR trimers. However, their design implies that the NHR is partially covered by CHR, which would be expected to limit potency. An exposed hydrophobic pocket in the folded structure may be sufficient to confer the observed potency, or they may exist in a partially unfolded state exposing full length NHR. Here, in this study, we examined their structure by crystallography, CD and fluorescence, establishing that the proteins are folded hairpins both in crystal form and in solution. We examined unfolding in the milieu of the fusion reaction by conducting experiments in the presence of a membrane mimetic solvent and by engineering a disulfide bond into the structure to prevent partial unfolding. We further examined the role of the hydrophobic pocket, using a hairpin-small molecule adduct that occluded the pocket, as confirmed by X-ray footprinting. The results demonstrated that the NHR region nominally covered by CHR in the engineered constructs and the hydrophobic pocket region that is exposed by design were both essential for nanomolar potency and that interaction with membrane is likely to play a role in promoting the required inhibitor structure. The design concepts can be applied to other Class 1 viral fusion proteins.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Constraining the Dynamo Layers in Jupiter and Saturn with Observations and Scaling Laws

The dipole-dominated magnetic fields of Jupiter and Saturn provide evidence for active dynamos operating within their deep interiors, yet the depth of the convecting dynamo layers remains poorly constrained. While magnetic field observations, gravity data, and interior models each provide partial insight, they have not been combined into a single, self-consistent picture of the internal structure. Here, we develop a framework that links observed magnetic field strength with intrinsic heat flux and gravity-constrained interior structure using energy-based dynamo scaling laws. By relating the axial magnetic field strength to the convective power, we infer the radial thickness of the dynamo-generating region for both Jupiter and Saturn. The constants of proportionality in the scaling relations are derived using independent constraints from Earth observations, Jupiter observations, and numerical dynamo simulations. Applied to Jupiter, this framework shows how the inferred dynamo layer thickness is coupled to the outer boundary of the dynamo region. Thinner dynamo layers are predicted when the outer boundary shifts to shallower depths, and no solutions are possible when the outer boundary is less than 73% of Jupiter’s radius. These results constrain plausible geometries for future numerical dynamo simulations. Extending the analysis to Saturn, we find a thick, deep-seated dynamo layer with an outer radius at 42% of the radius to be most plausible. An alternative solution with an inner radius of the dynamo region at 60% of the planetary radius, as suggested by ring seismology models, requires a very thin dynamo layer, occupying only 2%–3% of the total radius.

Geosciences↗
DOE OSTI2026

Large Eddy Simulations of the Atmospheric Boundary Layer Over Satellite‐Sensed Sea Ice Maps

Surface heterogeneity in the marginal ice zone (MIZ) causes multiscale secondary atmospheric circulations that are challenging to model or observe. The absence or inadequate representation of these circulations in ocean‐atmosphere exchange schemes in climate models is partially responsible for the underestimation of Arctic sea ice loss. Observationally, such circulations obfuscate the interpretation of polar atmospheric chemistry measurements, among others. To address this open challenge, large‐eddy simulations are conducted over real‐world satellite‐sensed sea ice maps with an ice‐sea temperature contrast, as well as over idealizations of these maps that alter the ice pattern but conserve its fraction, showing that the ice fraction of a surface is not sufficient to predict the surface heat flux. In a second suite of simulations, three other heterogeneity metrics (representing the surface fragmentation, patch edge tortuosity, and patch size variability) are introduced to complement the ice fraction in describing the surface. Simulations varying these parameters suggest that they also significantly impact surface‐air interactions. A roughness contrast is then added to the surface temperature contrast, indicating that the contribution of roughness changes to the resulting atmospheric circulations is less pronounced than that of thermal heterogeneity. Based on these results, we illustrate, using a multi‐linear regression on these map features, that MIZ surface parameterizations in Earth Systems Models can be improved if they account for these various characteristics of the sea‐ice patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Extended quantum anomalous Hall states in graphene/hBN moiré superlattices

Electrons in topological flat bands can form new topological states driven by correlation effects. The pentalayer rhombohedral graphene/hexagonal boron nitride (hBN) moiré superlattice was shown to host fractional quantum anomalous Hall effect (FQAHE) at approximately 400 mK, triggering discussions around the underlying mechanism and role of moiré effects. In particular, new electron crystal states with non-trivial topology have been proposed. Here, in this paper, we report electrical transport measurements in rhombohedral pentalayer and tetralayer graphene/hBN moiré superlattices at electronic temperatures down to below 40 mK. We observed two more fractional quantum anomalous Hall (FQAH) states and smaller R xx values in pentalayer devices than those previously reported. In the new tetralayer device, we observed FQAHE at moiré filling factors v = 3/5 and 2/3. With a small current at the base temperature, we observed a new extended quantum anomalous Hall (EQAH) state and magnetic hysteresis, where R xy = h/e 2 and vanishing R xx spans a wide range of v from 0.5 to 1.3. At increased temperature or current, EQAH states disappear and partially transition into the FQAH liquid. Furthermore, we observed displacement field-induced quantum phase transitions from the EQAH states to the Fermi liquid, FQAH liquid and the likely composite Fermi liquid. Our observations established a new topological phase of electrons with quantized Hall resistance at zero magnetic field and enriched the emergent quantum phenomena in materials with topological flat bands.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Measurement of single- and double-polarization observables in the photoproduction of 𝜋 + ⁢𝜋 − meson pairs off the proton using CLAS at Jefferson Laboratory

The photoproduction of 𝜋 + ⁢𝜋 − meson pairs off the proton has been studied in the reaction 𝛾⁢𝑝→𝑝⁢𝜋 + ⁢𝜋 − using the CEBAF Large Acceptance Spectrometer (CLAS) and the frozen-spin target (FROST) in Hall B at the Thomas Jefferson National Accelerator Facility. For the first time, the beam and target asymmetries, 𝐼 𝑠,𝑐 and 𝑃 𝑥,𝑦 , have been measured along with the beam-target double-polarization observables, 𝑃$^{𝑠,𝑐}_{𝑥,𝑦}$, using a transversely polarized target with center-of-mass energies ranging from 1.51 GeV up to 2.04 GeV. These data and additional 𝜋⁢𝜋 photoproduction observables from CLAS and experiments elsewhere were included in a partial-wave analysis within the Bonn-Gatchina framework. Significant contributions from 𝑠-channel resonance production are observed in addition to 𝑡-channel exchange processes. The data indicate significant contributions from 𝑁* and Δ* resonances in the third and fourth resonance regions.

QCD phenomenology↗
DOE OSTI2026

Taylor approximation variance reduction for approximation errors in PDE-constrained Bayesian inverse problems

In numerous applications, surrogate models are used as a replacement for accurate parameter-to-observable mappings when solving large-scale inverse problems governed by partial differential equations (PDEs). The surrogate model may be a computationally cheaper alternative to the accurate parameter-to-observable mappings and/or may ignore additional unknowns or sources of uncertainty. The Bayesian approximation error (BAE) approach provides a means to account for the induced uncertainties and approximation errors, i.e. the errors between the accurate parameter-to-observable mapping and the surrogate. The statistics of these errors are, however, in general unknown a priori, and are thus calculated using Monte Carlo sampling. Although the sampling is typically carried out offline, i.e. before considering the data, the process can still represent a computational bottleneck. In this work, we develop a scalable computational approach for reducing the costs associated with the sampling stage of the BAE approach. Specifically, we consider the Taylor expansion of the accurate and surrogate forward models with respect to the uncertain parameter fields either as a control variate for variance reduction or as a means to directly and efficiently approximate the mean and covariance of the approximation errors. We propose efficient methods for evaluating the expressions for the mean and covariance of the Taylor approximations based on linear(-ized) PDE solves. Furthermore, the proposed approach is independent of the dimension of the uncertain parameter, depending instead on the intrinsic dimension of the data, ensuring scalability to high-dimensional problems. The potential benefits of the proposed approach are demonstrated for two high-dimensional inverse problems governed by PDE examples, namely for the estimation of a distributed Robin boundary coefficient in a linear diffusion problem, and for a coefficient estimation problem governed by a nonlinear diffusion problem.

Bayesian approximation error↗
DOE OSTI2025

Towards Full ‘Galilei General Relativity’: Gravitational Kinematics in Bargmann Spacetimes

Because of the strict separation of mass and energy in Galilei physics, a Galilei-invariant tensor formalism is most at home in a 5-dimensional extended spacetime associated with the Bargmann-Galilei (traditionally ‘Bargmann’) group, a central extension of the Galilei group that explicitly exhibits the transformation properties of kinetic energy. While not necessary for a tensor formalism fully embodying Poincaré physics, a similar central extension of the Poincaré group to the Bargmann-Poincaré group may illuminate a path towards a strong-field ‘Galilei general relativity’. Here the Bargmann metric is generalized to curved spacetime by extending the usual 1+3 (traditionally ‘3+1’) formalism of general relativity on 4-dimensional spacetime to a 1+3+1 formalism, whose spacetime kinematics is shown to be consistent with that of the usual 1+3 formalism. On Bargmann spacetime, tensor laws governing the motion of an elementary classical material particle and the dynamics of a simple fluid reference the foliation of spacetime in a manner that partially reverts the Einstein perspective (accelerated fiducial observers, and geodesic material particles and fluid elements) to a Newton-like perspective (geodesic fiducial observers, and accelerated material particles and fluid elements subject to a gravitational force).

Cardall, Christian [ORNL] (ORCID:000000020086105X)↗
DOE OSTI2025

Quantifying uncertainties in α -nucleus reaction dynamics informed from first principles

The ab initio symmetry-adapted no-core shell model is a microscopic many-body method which naturally describes challenging collective and clustering features of atomic nuclei. Wave functions and observables computed with realistic nucleon-nucleon forces in this framework are tied to first principles, and are hence well-suited for rigorous uncertainty quantification. We discuss α-deuteron and α- 12 C cluster potentials informed by symmetry-adapted calculations, and propagate uncertainties in the effective binary cluster method as well as those in the nuclear interaction to reaction observables, namely scattering phase shifts, cross sections, partial widths and resonance energies. Here, we find that the overall uncertainties are dominated by those originating in the underlying nuclear force, speaking to the need for tighter constraints on realistic nucleon-nucleon interactions.

Ab initio↗
DOE OSTI2025

Revisiting the Effects of Seed Liquid Water Content on Isoprene Secondary Organic Aerosol Growth

Aerosol liquid water content (LWC) has been shown to enhance partitioning of water-soluble oxygenated organic vapors into the aerosol particles and facilitate aqueous chemistry, impact SOA formation, composition, and physicochemical properties. Here, this study examines the effect of aerosol liquid water content (LWC) on isoprene SOA formation using effloresced and deliquesced ammonium sulfate ((NH 4 ) 2 SO 4 ) and sodium chloride (NaCl) seed particles in an environmental chamber with photo-oxidation extending over hours under moderate relative humidity (50%-60%). Our findings indicate that isoprene SOA mass yield is not significantly influenced (p value >> 0.05) by the phase state or the chemical identity of the seed particles within a 3–4-hour reaction time scale. Detailed molecular analysis using advanced high resolution mass spectrometry indicates that while both effloresced and deliquesced seed types produced similar molecular formula distributions, deliquesced (NH 4 ) 2 SO 4 slightly favored the production of less volatile compounds. Depth-profiling analysis by single particle mass spectrometry confirmed that isoprene SOA predominantly located on the surfaces of particles with core-shell morphologies, with partial dissolution of the effloresced inorganic salt observed even below the deliquescence relative humidity (DRH) of salt. This finding suggests that assuming dry salt core particles do not interact with SOA coatings, based on salt deliquescence points, may overlook important aqueous chemistry. These results emphasize the critical role of reaction time scale and mixing state on SOA formation and call for further research to understand LWC effects on SOA from different precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A Unified Perspective on Poincaré and Galilei Relativity: II. General Relativity: A. Kinematics

Building on the first paper in this series (Paper I), a unified perspective on Poincaré and Galilei physics in a 5-dimensional spacetime setting is further pursued through a consideration of the kinematics of general relativity, with the gravitational dynamics to be addressed separately. The metric of the 5-dimensional affine spacetimes governed by the Bargmann groups considered in Paper I (central extensions of the Poincaré and Galilei groups) is generalized to curved spacetime by extending the usual 1 + 3 (traditionally ‘3 + 1’) formalism of general relativity on 4-dimensional spacetime to a 1 + 3 + 1 formalism, whose spacetime kinematics is shown to be consistent with that of the usual 1 + 3 formalism. Spacetime tensor laws governing the motion of an elementary classical material particle and the dynamics of a simple fluid are presented, along with their 1 + 3 + 1 decompositions; these reference the foliation of spacetime in a manner that partially reverts the Einstein perspective (accelerated fiducial observers, and geodesic material particles and fluid elements) to a Newton-like perspective (geodesic fiducial observers, and accelerated material particles and fluid elements subject to a gravitational force). These spacetime laws of motion for particles and fluids also suggest that a strong-field Galilei general relativity would involve a limit in which not only 𝑐 → ∞ but also 𝐺 → ∞ , such that 𝐺/𝑐 2 remains constant.

Bargmann group↗
DOE OSTI2025

DOUBLY-STRANGE BARYON SPECTROSCOPY WITH THE GLUEX EXPERIMENT: GROUND STATE ¿(1320) PHOTOPRODUCTION CROSS SECTION AND PROPERTIES

In the light-quark sector, traditional quark models and, more recently, lattice QCD calculations have predicted many more baryon states than have been experimentally observed. The hyperons, baryons with strange-quark content, in particular abundantly lack these observed states, and past observations are statistically limited. For multi-strange hyperons the matter is much worse and the production mechanisms of these states in photoproduction are very poorly understood. By capitalizing on the narrow peaks, as compared to the broad and overlapping N* and ¿* states, characteristic of the lowest lying ¿ resonances, the systematic aspects of the spectrum can be analyzed. In addition, we can measure experimental observables such as the production cross section to study the production mechanisms of the ¿ resonances. By accumulating various experimental observables, this goal could be accomplished through Partial Wave Analysis (PWA). The main body of work presented in this dissertation is the physics analysis and systematic study of the production cross section for the doubly strange octet ground state baryon (¿(1320)) in the exclusive t-channel photoproduction reaction ¿p ¿ K+Y* ¿ K+(K+¿-)Y* where ¿- ¿ ¿p- and ¿ ¿ pp-. The spin quantum number of ¿(1320) is also extracted and discussed. A preliminary result to extract the mass of ¿(1320) is also explored as a result of the statistical limitations of current measurements. Furthermore, the spectrum of the excited ¿* baryons are explored and discussed in the ¿*- ¿ K-¿ decay channel. The studies on the ground state and excited ¿ baryon are performed using the GlueX Phase-I (GlueX-I) data set. We have extracted differential cross sections from seven beam photon energy bins for E¿ ¿ [6.4,11.4] GeV1 and for -t < 2.4 GeV2 in the production of K+Y*. 1Natural units (c = 1) are used for the entire body of work.

Hernandez, Jesse [Florida State Univ., Tallahassee↗
DOE OSTI2024

Coherent High-Frequency Axial Oscillations in a Partially Magnetized Direct Current Magnetron Discharge

High-frequency oscillations are observed in a neon plasma of a direct current magnetron discharge. At low discharge currents, we see highly coherent 60 MHz fluctuations. Above a distinct current threshold, secondary 5–10 MHz fluctuations emerge in addition to turbulent fluctuations in the 60–100 MHz range. The oscillations in the total discharge current suggest axial wave propagation. A lower-hybrid wave theory is invoked to model the high-frequency oscillations. Here, we attribute the low-frequency modes to a turbulence-driven inverse cascade process, as suggested by recent simulations.

33 ADVANCED PROPULSION SYSTEMS↗