SEARCH · Engineering Papers

Results for “parameterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Cross section parameterizations for cosmic-ray nuclei. 2: Double nucleon removal

Parameterizations of double nucleon removal from the electromagnetic and strong interactions of cosmic rays with nuclei are presented. These parameterizations are an extension of previous single nucleon removal parameterizations and combined they represent the dominant part of the electromagnetic dissociation encountered by a cosmic ray on its traversal through matter. Such parameterizations should be very useful in studying cosmic-ray transport through the interstellar medium, the Earth's atmosphere, spacecraft walls, and extraterrestrial matter.

Norbury, John W.↗

NASA NTRS1994

Effects of a polar stratosphere cloud parameterization on ozone depletion due to stratospheric aircraft in a two-dimensional model

A parameterization of Type 1 and 2 polar stratospheric cloud (PSC) formation is presented which is appropriate for use in two-dimensional (2-D) photochemical models of the stratosphere. The calculations of PSC frequency of occurrence and surface area density uses climatological temperature probability distributions obtained from National Meteorological Center data to avoid using zonal mean temperatures, which are not good predictors of PSC behavior. The parameterization does not attempt to model the microphysics of PSCs. The parameterization predicts changes in PSC formation and heterogeneous processing due to perturbations of stratospheric trace constituents. It is therefore useful in assessing the potential effects of a fleet of stratospheric aircraft (high speed civil transports, or HSCTs) on stratospheric composition. the model calculated frequency of PSC occurrence agrees well with a climatology based on stratospheric aerosol measurement (SAM) 2 observations. PSCs are predicted to occur in the tropics. Their vertical range is narrow, however, and their impact on model O3 fields is small. When PSC and sulfate aerosol heterogeneous processes are included in the model calculations, the O3 change for 1980 - 1990 is in substantially better agreement with the total ozone mapping spectrometer (TOMS)-derived O3 trend than otherwise. The overall changes in model O3 response to standard HSCT perturbation scenarios produced by the parameterization are small and tend to decrease the model sensitivity to the HSCT perturbation. However, in the southern hemisphere spring a significant increase in O3 sensitivity to HSCT perturbations is found. At this location and time, increased PSC formation leads to increased levels of active chlorine, which produce the O3 decreases.

Considine, David B.↗

NASA NTRS2000

Parameterized Cross Sections for Pion Production in Proton-Proton Collisions

An accurate knowledge of cross sections for pion production in proton-proton collisions finds wide application in particle physics, astrophysics, cosmic ray physics, and space radiation problems, especially in situations where an incident proton is transported through some medium and knowledge of the output particle spectrum is required when given the input spectrum. In these cases, accurate parameterizations of the cross sections are desired. In this paper much of the experimental data are reviewed and compared with a wide variety of different cross section parameterizations. Therefore, parameterizations of neutral and charged pion cross sections are provided that give a very accurate description of the experimental data. Lorentz invariant differential cross sections, spectral distributions, and total cross section parameterizations are presented.

Blattnig, Steve R.↗

NASA NTRS2001

A Comparison of Cumulus Parameterizations in Idealized Sea-Breeze Simulations

Four cumulus parameterizations in the Penn State-NCAR model MM5 are compared in idealized sea-breeze simulations, with the aim of discovering why they work as they do. The most realistic results appear to be those using the Kain-Fritsch scheme. Rainfall is significantly delayed with the Betts-Miller-Janjic scheme, due to the method of computing the reference sounding. This method can be corrected, but downdrafts should be added in a physically realistic manner. Even without downdrafts, a corrected version of the BMJ scheme produces nearly the same timing and location of deep convection as the KF scheme, despite the very different physics. In order to simulate the correct timing of the rainfall, a minimum amount of mass is required in the layer that is the source of a parameterized updraft. The Grell parameterization, in the present simulation, always derives the updraft from the top of the mixed layer, where vertical advection predominates over horizontal advection in increasing the moist static energy. This makes the application of the quasi-equilibrium closure more correct than it would be if the updrafts were always derived from the most unstable layer, but it evades the question of whether or not horizontal advection generates instability. Using different physics, the parameterizations produce significantly different cloud-top heights.

Cohen, Charles↗

NASA NTRS2002

Parameterization of Cloud Optical Properties for a Mixture of Ice Particles for use in Atmospheric Models

Based on the single-scattering optical properties that are pre-computed using an improve geometric optics method, the bulk mass absorption coefficient, single-scattering albedo, and asymmetry factor of ice particles have been parameterized as a function of the mean effective particle size of a mixture of ice habits. The parameterization has been applied to compute fluxes for sample clouds with various particle size distributions and assumed mixtures of particle habits. Compared to the parameterization for a single habit of hexagonal column, the solar heating of clouds computed with the parameterization for a mixture of habits is smaller due to a smaller cosingle-scattering albedo. Whereas the net downward fluxes at the TOA and surface are larger due to a larger asymmetry factor. The maximum difference in the cloud heating rate is approx. 0.2 C per day, which occurs in clouds with an optical thickness greater than 3 and the solar zenith angle less than 45 degrees. Flux difference is less than 10 W per square meters for the optical thickness ranging from 0.6 to 10 and the entire range of the solar zenith angle. The maximum flux difference is approximately 3%, which occurs around an optical thickness of 1 and at high solar zenith angles.

Chou, Ming-Dah↗

NASA NTRS2002

Parameterization of Shortwave Cloud Optical Properties for a Mixture of Ice Particle Habits for use in Atmospheric Models

Based on the single-scattering optical properties pre-computed with an improved geometric optics method, the bulk absorption coefficient, single-scattering albedo, and asymmetry factor of ice particles have been parameterized as a function of the effective particle size of a mixture of ice habits, the ice water amount, and spectral band. The parameterization has been applied to computing fluxes for sample clouds with various particle size distributions and assumed mixtures of particle habits. It is found that flux calculations are not overly sensitive to the assumed particle habits if the definition of the effective particle size is consistent with the particle habits that the parameterization is based. Otherwise, the error in the flux calculations could reach a magnitude unacceptable for climate studies. Different from many previous studies, the parameterization requires only an effective particle size representing all ice habits in a cloud layer, but not the effective size of individual ice habits.

Chou, Ming-Dah↗

NASA NTRS2002

New Concepts for Refinement of Cumulus Parameterization in GCM's the Arakawa-Schubert Framework

Several state-of-the-art models including the one employed in this study use the Arakawa-Schubert framework for moist convection, and Sundqvist formulation of stratiform. clouds, for moist physics, in-cloud condensation, and precipitation. Despite a variety of cloud parameterization methodologies developed by several modelers including the authors, most of the parameterized cloud-models have similar deficiencies. These consist of: (a) not enough shallow clouds, (b) too many deep clouds; (c) several layers of clouds in a vertically demoralized model as opposed to only a few levels of observed clouds, and (d) higher than normal incidence of double ITCZ (Inter-tropical Convergence Zone). Even after several upgrades consisting of a sophisticated cloud-microphysics and sub-grid scale orographic precipitation into the Data Assimilation Office (DAO)'s atmospheric model (called GEOS-2 GCM) at two different resolutions, we found that the above deficiencies remained persistent. The two empirical solutions often used to counter the aforestated deficiencies consist of a) diffusion of moisture and heat within the lower troposphere to artificially force the shallow clouds; and b) arbitrarily invoke evaporation of in-cloud water for low-level clouds. Even though helpful, these implementations lack a strong physical rationale. Our research shows that two missing physical conditions can ameliorate the aforestated cloud-parameterization deficiencies. First, requiring an ascending cloud airmass to be saturated at its starting point will not only make the cloud instantly buoyant all through its ascent, but also provide the essential work function (buoyancy energy) that would promote more shallow clouds. Second, we argue that training clouds that are unstable to a finite vertical displacement, even if neutrally buoyant in their ambient environment, must continue to rise and entrain causing evaporation of in-cloud water. These concepts have not been invoked in any of the cloud parameterization schemes so far. We introduced them into the DAO-GEOS-2 GCM with McRAS (Microphysics of Clouds with Relaxed Arakawa-Schubert Scheme).

Sud, Y. C.↗

NASA NTRS1994

Cross section parameterizations for cosmic-ray nuclei. II. Double nucleon removal

NASA Discipline Radiation Health↗

NASA NTRS2006

Improving Lightning NO(x) Parameterizations for Global Chemical Transport Models

Parameterization of lightning NO(x) in global chemical transport models requires a method to specify the temporal and geographic distribution of flash rates, an estimate of NO production per flash, and a method to specify the effective vertical distribution of NO production. Flash rate parameterizations using the upward convective cloud mass flux have been developed and tested for several GCM and assimilated meteorological data sets. This parameterization and others involving the cloud-top height and convective precipitation provide a generally acceptable climatological distribution of flashes after normalization with satellite data. However, considerable improvement in terms of geographic and temporal variability may be achieved in the future using cloud microphysics data available from next-generation GCMs. Cloud-resolving case-study simulations of convective transport and lightning NO production have yielded results which are directly applicable to the NO production per flash and the vertical NO distribution portions of the global model lightning parameterizations. In this work we have used cloud-resolving models (the Goddard Cumulus Ensemble Model (GCE) and MM5) to drive an off-line cloud-scale chemical transport model (CSCTM). The CSCTM, in conjunction with aircraft measurements of NO(x) in thunderstorms and ground-based lightning observations, has been used to constrain the amount of NO produced per flash. Observed lightning flash rates have been incorporated into the CSCTM, and several scenarios of NO production per intracloud (IC) and per cloud-to-ground (CG) flash have been tested in each of several case study storms. The resulting NO(x) mixing ratios are compared with aircraft measurements taken within the storm (typically the anvil region) to determine the most likely NO production scenario. The range of values of NO production per flash (or per meter of lightning channel length) that have been deduced from the model will be shown and compared with values of production in the literature that have been deduced from observed NO spikes and from anvil flux calculations. Results show that on a per flash basis, IC flashes are nearly as productive of NO as CG flashes. Estimates of mean NO production per flash vary by a factor of three from one simulated storm to another. Vertical profiles of lightning NOx mass at the end of the 3-D storm simulations have been summarized to yield suggested profiles for use in global models. These profiles show a larger percentage of the total lightning NO(x) mass in the free troposphere than those suggested by Pickering et al. (1998).

Pickering, Kenneth E.↗

NASA NTRS2008

Electron Impact Ionization: A New Parameterization for 100 eV to 1 MeV Electrons

Low, medium and high energy electrons can penetrate to the thermosphere (90-400 km; 55-240 miles) and mesosphere (50-90 km; 30-55 miles). These precipitating electrons ionize that region of the atmosphere, creating positively charged atoms and molecules and knocking off other negatively charged electrons. The precipitating electrons also create nitrogen-containing compounds along with other constituents. Since the electron precipitation amounts change within minutes, it is necessary to have a rapid method of computing the ionization and production of nitrogen-containing compounds for inclusion in computationally-demanding global models. A new methodology has been developed, which has parameterized a more detailed model computation of the ionizing impact of precipitating electrons over the very large range of 100 eV up to 1,000,000 eV. This new parameterization method is more accurate than a previous parameterization scheme, when compared with the more detailed model computation. Global models at the National Center for Atmospheric Research will use this new parameterization method in the near future.

Fang, Xiaohua↗

NASA NTRS2007

Satellite-Based Model Parameterization of Diabatic Heating

Future meteorological satellites are expected to provide much needed fine-scale information that can improve the accuracy of weather and climate models. As one application of this improved capability, we introduce the concept of a generalized parameterization framework using satellite datasets that will increase the accuracy and the computational efficiency of weather and climate modeling. In an atmospheric model, several different parameterizations usually are used to reproduce the various physical processes. However, it is generally unrealistic to separate the processes in this artificial way since the observations and physics make no such artificial separation. Thus, we propose a new unified parameterization framework to remove the unrealistic separation between parameterizations.

Pielke, Roger, Sr.↗

NASA NTRS2014

Sensitivity of Tropical Cyclones to Parameterized Convection in the NASA GEOS5 Model

The sensitivity of tropical cyclones (TCs) to changes in parameterized convection is investigated to improve the simulation of TCs in the North Atlantic. Specifically, the impact of reducing the influence of the Relaxed Arakawa-Schubert (RAS) scheme-based parameterized convection is explored using the Goddard Earth Observing System version5 (GEOS5) model at 0.25 horizontal resolution. The years 2005 and 2006 characterized by very active and inactive hurricane seasons, respectively, are selected for simulation. A reduction in parameterized deep convection results in an increase in TC activity (e.g., TC number and longer life cycle) to more realistic levels compared to the baseline control configuration. The vertical and horizontal structure of the strongest simulated hurricane shows the maximum lower-level (850-950hPa) wind speed greater than 60 ms and the minimum sea level pressure reaching 940mb, corresponding to a category 4 hurricane - a category never achieved by the control configuration. The radius of the maximum wind of 50km, the location of the warm core exceeding 10 C, and the horizontal compactness of the hurricane center are all quite realistic without any negatively affecting the atmospheric mean state. This study reveals that an increase in the threshold of minimum entrainment suppresses parameterized deep convection by entraining more dry air into the typical plume. This leads to cooling and drying at the mid- to upper-troposphere, along with the positive latent heat flux and moistening in the lower-troposphere. The resulting increase in conditional instability provides an environment that is more conducive to TC vortex development and upward moisture flux convergence by dynamically resolved moist convection, thereby increasing TC activity.

GEOS5↗

NASA NTRS2018

Impact of a Cold Pool Parameterization on the Diurnal Cycle and Intraseasonal Variability in the GEOS AGCM

A gradual transition from shallow to deep convection may be important both to the continental diurnal cycle of precipitation and to the tropical Madden-Julian Oscillation. However, many existing convection parameterizations transition too readily, with corresponding diurnal and intraseasonal biases. High entrainment rates can be used to delay deep convection, but typically produce mean state biases; this is the "entrainment dilemma." Cold pools and sub-grid organization offer a potential solution to this dilemma, and recent work shows parameterized cold pools can effectively modulate deep convection, with improvements to the diurnal cycle and intraseasonal variability. Here we investigate the effects of a simple prognostic cold pool scheme coupled to the Grell-Freitas convection parameterization, in a set of global simulations with the NASA GEOS model. Air detrained from parameterized downdrafts is maintained in vertically resolved cold pools, which evolve with simplified dynamics. We test several options for cold pool feedbacks on convection, including modifications to deep convective entrainment rates, convective source air properties, and thermodynamic profiles, based on the level of cold pool activity. Cold pool impacts on the diurnal cycle are evaluated against TRMM, and moisture and moist static energy budgets are used to understand changes in tropical intraseasonal variability. Preliminary results show delays in the diurnal cycle of precipitation.

Arnold, Nathan↗

NASA NTRS2020

Cascading toward a Kilometer‐scale GCM: Impacts of a Scale‐aware Convection Parameterization in the Goddard Earth Observing System GCM.

The NASA Goddard Earth Observing System global model is evaluated through a cascade of simulations with increasing horizontal resolution. This model employs a non-hydrostatic dynamical core and includes a scale-aware, deep convection parameterization (DPCP). 40-daysimulations at six resolutions (100km to 3km) with unvarying model formulation were produced. At the highest resolution, extreme experiments were carried out; one with no DPCP, and one with its scale-awareness eliminated. Simulated precipitation, radiative balance, and atmospheric thermodynamic and dynamical variables are well reproduced with respect to both observational and reanalysis data. As model resolution increases, the convective precipitation smoothly transitions from being mostly produced by the convection parameterization to the cloud microphysics parameterization. However, contrary to current thought, these extreme cases argue for maintaining, to some extent, the scale-aware deep convection parameterization even at 3kmscale, as the run relying solely on explicit grid-scale production of rainfall performs more poorly at this resolution.

Saulo Freitas↗

NASA NTRSDate not supplied

Boundary Layer Data Assimilation and Interaction with Parameterizations in the NASA GEOS Model

The NASA Global Modeling and Assimilation Office develops the Goddard Earth Observing System (GEOS), which assimilates a wide range of observations to support medium range and seasonal forecasts and production of reanalyses like MERRA-2. In this talk we report on recent efforts to assimilate boundary layer (PBL) height observations derived from radiosondes, GNSS radio occultation, space-based lidar (CALIPSO, CATS, IceSat-2) and ground-based lidar (MPLNET). A novel component of this project includes examining the influence of model parameterizations on PBL profile estimates. We will discuss physics-based parameterizations of the PBL and how they may benefit or distort representation of PBL profiles in data assimilation. In particular, we consider the tendency of PBL parameterizations to compensate for analysis updates of state variables, effectively reducing the information retained from observations. We will present efforts to reduce this compensation in GEOS by using the PBL height analysis to adjust length scales used in the model PBL parameterizations.

Nathan Arnold↗

NASA NTRSDate not supplied

Boundary Layer Data Assimilation and Interaction with Parameterizations in the NASA GEOS Model

Nathan P. Arnold↗

NASA NTRS2015

Organic Aerosol Volatility Parameterizations and Their Impact on Atmospheric Composition and Climate

Despite their importance and ubiquity in the atmosphere, organic aerosols are still very poorly parameterized in global models. This can be explained by two reasons: first, a very large number of unconstrained parameters are involved in accurate parameterizations, and second, a detailed description of semi-volatile organics is computationally very expensive. Even organic aerosol properties that are known to play a major role in the atmosphere, namely volatility and aging, are poorly resolved in global models, if at all. Studies with different models and different parameterizations have not been conclusive on whether the additional complexity improves model simulations, but the added diversity of the different host models used adds an unnecessary degree of variability in the evaluation of results that obscures solid conclusions. Aerosol microphysics do not significantly alter the mean OA vertical profile or comparison with surface measurements. This might not be the case for semi-volatile OA with microphysics.

Aerosols↗

NASA NTRSDate not supplied

Comparison of INP Parameterizations for Dust Minerals in Climatological Simulations With a Global Model

The effect of aerosol particles on ice nucleation and, in turn, the formation of ice and mixed phase clouds is recognized as one of the largest sources of uncertainty in weather and climate prediction. We utilize an improved sectional dust module in NASA GISS Earth System ModelE2.1, which distinguishes eight different mineral species and accretions between iron oxides and the other minerals. Simulations over a period of 20 years have been carried out with this model, and the mineral fields and other model variables (temperature, relative humidity) are used to calculate the ice nucleating particle (INP) number concentration, applying time-independent and time-dependent INP parameterizations, such as active site parameterization and water activity based immersion freezing model (ABIFM). We study how the dependence of the parameterizations on different model variables affects the mean INP number concentration. The sensitivity of the INP number concentration to fundamental dust properties such as emitted mineral size distributions and mixing state between minerals is also investigated. Results show that the sensitivity of the total INP number concentration to the emitted dust size distribution is rather small, but the sensitivity over the whole size range obscures offsetting differences in the magnitude and the sign of the sensitivity between smaller and larger particles.

INP Parameterizations↗