SEARCH · Engineering Papers

Results for “parallel tempering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2018

Evolutionary and demographic correlates of Pleistocene coastline changes in the Sicilian wall lizard Podarcis wagleriana

Abstract Aim Emergence of coastal lowlands during Pleistocene ice ages might have provided conditions for glacial expansions (demographic and spatial), rather than contraction, of coastal populations of temperate species. Here, we tested these predictions in the insular endemic Sicilian wall lizard Podarcis wagleriana . Location Sicily and neighbouring islands. Methods We sampled 179 individuals from 45 localities across the whole range of P. wagleriana . We investigated demographic and spatial variations through time using Bayesian coalescent models (Bayesian phylogeographic reconstruction, Extended Bayesian Skyline plots, Isolation‐with‐migration models) based on multilocus DNA sequence data. We used species distribution modelling to reconstruct present and past habitat suitability. Results We found two main lineages distributed in the east and west portions of the current species range and a third lineage restricted to a small area in the north of Sicily. Multiple lines of evidence from palaeogeographic (shorelines), palaeoclimatic (species distribution models), and multilocus genetic data (demographic and spatial Bayesian reconstructions) indicate that these lineages originated in distinct refugia, located in the north‐western and south‐eastern coastal lowlands, during Middle Pleistocene interglacial phases, and came into secondary contact following demographic and spatial expansions during the last glacial phase. Main conclusions This scenario of interglacial contraction and glacial expansion is in sharp contrast with patterns commonly observed in temperate species on the continent but parallels recent findings on other Mediterranean island endemics. Such a reverse expansion–contraction ( EC ) dynamic has been likely associated with glacial increases of climatically suitable coastal lowlands, suggesting this might be a general pattern in Mediterranean island species and also in other coastal regions strongly affected by glacial marine regressions during glacial episodes. This study provides explicit predictions and some methodological recommendations for testing the reverse EC model in other region and taxa.

Senczuk, Gabriele↗

NASA NTRS1947

Effect of Brake Forming in Various Tempers on the Strength of Alclad 75S-T Aluminum-alloy Sheet

Results are presented of tests to determine the effect of brake forming in various tempers on the strength of Alclad 75S-T aluminum alloy sheet in the direction parallel to the brake. The tensile and compressive strengths of Alclad 75S-T sheet, formed in the O and W tempers, were either increased or little affected compared with those of similarly treated unformed material. When Alclad 75S-T sheet 'as received' was formed, however, the tensile yield stress was reduced about 7 percent for the with-grain direction and 1 percent for the cross-grain direction, whereas the tensile ultimate and compressive yield stresses were increased somewhat. The elongation was always slightly reduced as a result of forming.

Woods, Walter↗

DOE OSTI2018

Reduced Free Energy Perturbation/Hamiltonian Replica Exchange Molecular Dynamics Method with Unbiased Alchemical Thermodynamic Axis

We report that replica-exchange molecular dynamics (REMD) has been proven to efficiently improve the convergence of free energy perturbation (FEP) calculations involving considerable reorganization of their surrounding. We previously introduced the FEP/(λ,H)-REMD algorithm for ligand binding, in which replicas along the alchemical thermodynamic coupling axis λ were expanded as a series of Hamiltonian boosted replicas along a second axis to form a two-dimensional (2D) replica-exchange exchange map [Jiang, W.; Roux, B., J. Chem. Theory Comput. 2010, 6 (9), 2559-2565]. Aiming to achieve a similar performance at a lower computational cost, we propose here a modified version of this algorithm in which only the end-states along the alchemical axis are augmented by boosted replicas. The reduced FEP/(λ,H)-REMD method with one-dimensional (1D) unbiased alchemical thermodynamic coupling axis λ is implemented on the basis of generic multiple copy algorithm (MCA) module of the biomolecular simulation program NAMD. The flexible MCA framework of NAMD enables a user to design customized replica-exchange patterns through Tcl scripting in the context of a highly parallelized simulation program without touching the source code. Two Hamiltonian tempering boosting scheme were examined with the new algorithm: a first one based on potential energy rescaling of a pre-identified “solute”, and a second one via the introduction of flattening torsional free energy barriers. As two illustrative examples with reliable experiment data, the absolute binding free energies of pxylene and n-butylbenzene to the nonpolar cavity of the L99A mutant of T4 lysozyme were calculated. Lastly, the tests demonstrate that the new protocol efficiently enhances the sampling of torsional motions for backbone and side chains around the binding pocket and accelerates the convergence of the free energy computations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2014

The Metropolis Monte Carlo method with CUDA enabled Graphic Processing Units

We present a CPU–GPU system for runtime acceleration of large molecular simulations using GPU computation and memory swaps. The memory architecture of the GPU can be used both as container for simulation data stored on the graphics card and as floating-point code target, providing an effective means for the manipulation of atomistic or molecular data on the GPU. To fully take advantage of this mechanism, efficient GPU realizations of algorithms used to perform atomistic and molecular simulations are essential. Our system implements a versatile molecular engine, including inter-molecule interactions and orientational variables for performing the Metropolis Monte Carlo (MMC) algorithm, which is one type of Markov chain Monte Carlo. By combining memory objects with floating-point code fragments we have implemented an MMC parallel engine that entirely avoids the communication time of molecular data at runtime. Our runtime acceleration system is a forerunner of a new class of CPU–GPU algorithms exploiting memory concepts combined with threading for avoiding bus bandwidth and communication. The testbed molecular system used here is a condensed phase system of oligopyrrole chains. A benchmark shows a size scaling speedup of 60 for systems with 210,000 pyrrole monomers. Our implementation can easily be combined with MPI to connect in parallel several CPU–GPU duets. -- Highlights: •We parallelize the Metropolis Monte Carlo (MMC) algorithm on one CPU—GPU duet. •The Adaptive Tempering Monte Carlo employs MMC and profits from this CPU—GPU implementation. •Our benchmark shows a size scaling-up speedup of 62 for systems with 225,000 particles. •The testbed involves a polymeric system of oligopyrroles in the condensed phase. •The CPU—GPU parallelization includes dipole—dipole and Mie—Jones classic potentials.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2018

Austenite and precipitation in secondary-hardening ultra-high-strength stainless steel

Highlights: • Austenite and precipitation in Ferrium S53 steel were analyzed. • Austenite decreased to less than 5% after cryogenic treatment and tempering. • M{sub 2}C carbide could segregate inside martensite lath or in the larger parallel microstructure. - Abstract: Ferrium S53 is a new secondary-hardening ultra-high-strength stainless steel, with more Cr than other Co-Ni ultra-high-strength steels. Austenite has a great effect on the fracture toughness of this metal, and the carbides that are precipitated are the main strengthening phase of Ferrium S53 steel; in this study, its microstructural changes during heat treatment were observed and analyzed by X-ray diffraction (XRD), Optical microscope (OM), SEM, and transmission electron microscopy (TEM). About 40.85% retained austenite in the quenched sample is decreased to less than 5% after cryogenic treatment and tempering. In the final sample, block austenite is retained austenite, and film austenite around 5 nm in width is reverted austenite. Inside the martensite lath, parallel twin-like structures are actually segregated M{sub 2}C precipitates, and most of them are smaller than 20 nm. These precipitates can be aggregated into a several-micron-long parallel zonal microstructure.

36 MATERIALS SCIENCE↗

NASA NTRS1981

Design, fabrication and performance of high efficiency photovoltaic modules

Design details and performance and environmental test results of newly developed high performance and reliability photovoltaic modules are presented. Efficiencies averaging 14.3% for 3040 cells were obtained by using ion implantation for cell junction and back surface field formation. 152 rectangular (6.0 cm x 4.6 cm) cells arranged with a 97% local packing density comprise the circuit assembly, and cells are wired 4 in parallel by 38 in series. The top cover of the superstrate design module is composed of tempered low-iron glass to provide transparent protection for the optical surface. Results show that this design has an encapsulation system which does not fail in the event of reverse-bias operation, and an average module efficiency of 12.2% was achieved at a 58.6W power which varied only 2% among all 20 modules.

Nowlan, M. J.↗

NASA NTRS2011

Locating the Accretion Footprint on a Herbig Ae Star: MWC 480

Accretion is a fundamental process which establishes the dynamics of the protoplanetary disk and the final properties of the forming star. In solar-type stars, the star-disk coupling is determined by the magnetic field structure, which is responsible for funneling material from the disk midplane to higher latitudes on the star. Here, we use pan-chromatic data for the Herbig Ae star MWC 480 to address whether similar processes occur in intermediate-mass stars. MWC 480 has X-ray emission typical of actively accreting Herbig Ae stars, but with 5-9 x more photoelectric absorption than expected from optical and FUV data. We consider 3 sources for the absorption: the disk absorption in a wind or jet, and accretion. While we detect the disk in scattered light in are-analysis of archival HST data. the data are consistent with grazing illumination of the dust disk. We find that MWC 480's disk is stratified, geometrically thin, and is not responsible for the observed photoelectric absorption. MWC 480 drives a bipolar jet, but with a mass loss rate which is low compared to other Herbig Ae stars, where the outflow is more favorably oriented and enhanced photoelectric absorption is not seen. This excludes a jet or wind origin for the enhanced photoelectric absorption. We compare MWC 480's 0 VI emission with other Herbig Ae stars. The distribution of the emission in inclination, and lack of a correlation of profile shape and system inclination excludes equatorially-confined accretion for the FUSE Herbig Ae stars. The photoelectric absorption data further suggest that the accretion footprint on MWC 480 and other Herbig Ae stars is located at high temperate, rather than polar, latitudes. These findings support the presence of funneled accretion in MWC 480 and Herbig Ae stars, strengthening the parallel to T Tauri stars.

Grady, C. A.↗

NASA NTRS2000

Introduction to This Special Issue on Geostatistics and Geospatial Techniques in Remote Sensing

The germination of this special Computers & Geosciences (C&G) issue began at the Royal Geographical Society (with the Institute of British Geographers) (RGS-IBG) annual meeting in January 1997 held at the University of Exeter, UK. The snow and cold of the English winter were tempered greatly by warm and cordial discussion of how to stimulate and enhance cooperation on geostatistical and geospatial research in remote sensing 'across the big pond' between UK and US researchers. It was decided that one way forward would be to hold parallel sessions in 1998 on geostatistical and geospatial research in remote sensing at appropriate venues in both the UK and the US. Selected papers given at these sessions would be published as special issues of C&G on the UK side and Photogrammetric Engineering and Remote Sensing (PE&RS) on the US side. These issues would highlight the commonality in research on geostatistical and geospatial research in remote sensing on both sides of the Atlantic Ocean. As a consequence, a session on "Geostatistics and Geospatial Techniques for Remote Sensing of Land Surface Processes" was held at the RGS-IBG annual meeting in Guildford, Surrey, UK in January 1998, organized by the Modeling and Advanced Techniques Special Interest Group (MAT SIG) of the Remote Sensing Society (RSS). A similar session was held at the Association of American Geographers (AAG) annual meeting in Boston, Massachusetts in March 1998, sponsored by the AAG's Remote Sensing Specialty Group (RSSG). The 10 papers that make up this issue of C&G, comprise 7 papers from the UK and 3 papers from the LIS. We are both co-editors of each of the journal special issues, with the lead editor of each journal issue being from their respective side of the Atlantic. The special issue of PE&RS (vol. 65) that constitutes the other half of this co-edited journal series was published in early 1999, comprising 6 papers by US authors. We are indebted to the International Association for Mathematical Geology for allowing us to use C&G as a vehicle to convey how geostatistics and geospatial techniques can be used to analyze remote sensing and other types of spatial data. We see this special issue of C&G. and its complementary issue of PE&RS. as a testament to the vitality and interest in the application of geostatistical and geospatial techniques in remote sensing. We also see these special journal issues as the beginning of a fruitful. and hopefully long-term relationship, between American and British geographers and other researchers interested in geostatistical and geospatial techniques applied to remote sensing and other spatial data.

Atkinson, Peter↗

DOE OSTI2017

Parallelized, Aerobic, Single Carbon-Source Enrichments from Different Natural Environments Contain Divergent Microbial Communities

Microbial communities that inhabit environments such as soil can contain thousands of distinct taxa, yet little is known about how this diversity is maintained in response to environmental perturbations such as changes in the availability of carbon. By utilizing aerobic substrate arrays to examine the effect of carbon amendment on microbial communities taken from six distinct environments (soil from a temperate prairie and forest, tropical forest soil, subalpine forest soil, and surface water and soil from a palustrine emergent wetland), we examined how carbon amendment and inoculum source shape the composition of the community in each enrichment. Dilute subsamples from each environment were used to inoculate 96-well microtiter plates containing triplicate wells amended with one of 31 carbon sources from six different classes of organic compounds (phenols, polymers, carbohydrates, carboxylic acids, amines, amino acids). After incubating each well aerobically in the dark for 72 h, we analyzed the composition of the microbial communities on the substrate arrays as well as the initial inocula by sequencing 16S rRNA gene amplicons using the Illumina MiSeq platform. Comparisons of alpha and beta diversity in these systems showed that, while the composition of the communities that grow to inhabit the wells in each substrate array diverges sharply from that of the original community in the inoculum, these enrichment communities are still strongly affected by the inoculum source. We found most enrichments were dominated by one or several OTUs most closely related to aerobes or facultative anaerobes from the Proteobacteria (e.g., Pseudomonas, Burkholderia, and Ralstonia) or Bacteroidetes (e.g., Chryseobacterium). Comparisons within each substrate array based on the class of carbon source further show that the communities inhabiting wells amended with a carbohydrate differ significantly from those enriched with a phenolic compound. Selection therefore seems to play a role in shaping the communities in the substrate arrays, although some stochasticity is also seen whereby several replicate wells within a single substrate array display strongly divergent community compositions. Overall, the use of highly parallel substrate arrays offers a promising path forward to study the response of microbial communities to perturbations in a changing environment.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2015

Genomic dissection of anthracnose resistance response in sorghum [ Sorghum bicolor (L.) Moench]

Sorghum [ Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum . The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Genomic dissection of anthracnose resistance response in sorghum [Sorghum bicolor (L.) Moench]

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum. The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2018

Genomic dissection of anthracnose resistance response in sorghum [ Sorghum bicolor (L.) Moench]

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum. The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

09 BIOMASS FUELS↗

NASA NTRS1999

Introduction to this Special Issue on Geostatistics and Scaling of Remote Sensing

The germination of this special PE&RS issue began at the Royal Geographical Society (with the Institute of British Geographers)(RCS-IBC) annual meeting in January, 1997 held at the University of Exeter in Exeter, England. The cold and snow of an England winter were greatly tempered by the friendly and cordial discussions that ensued at the meeting on possible ways to foster both dialog and research across "the Big Pond" between geographers in the US and the UK on the use of geostatistics and geospatial techniques for remote sensing of land surface processes. It was decided that one way to stimulate and enhance cooperation on the application of geostatistics and geospatial methods in remote sensing was to hold parallel sessions on these topics at appropriate meeting venues in 1998 in both the US and the UK Selected papers given at these sessions would be published as a special issue of PE&RS on the US side, and as a special issue of Computers and Geosciences (C&G) on the UK side, to highlight the commonality in research on geostatistics and geospatial methods in remote sensing and spatial data analysis on both sides of the Atlantic Ocean. As a consequence, a session on "Ceostatistics and Geospatial Techniques for Remote Sensing of Land Surface Processes" was held at the Association of American Geographers (AAG) annual meeting in Boston, Massachusetts in March, 1998, sponsored by the AAG's Remote Sensing Specialty Group (RSSG). A similar session was held at the RGS-IBG annual meeting in Guildford, Surrey, England in January 1998, organized by the Modeling and Advanced Techniques Special Interest Group (MAT SIG) of the Remote Sensing Society (RSS). The six papers that in part, comprise this issue of PE&RS, are the US complement to such a dual journal publication effort. Both of us are co-editors of each of the journal special issues, with the lead editor of each journal being from their respective side of the Atlantic where the journals are published. The special issue of C&G that constitutes the other half of this co-edited journal series will be published in early 1999, with 3 papers by US authors being published along with 6 papers authored by individuals from the UK and other places in Europe.

Quattrochi, Dale A.↗

DOE OSTI2016

Addressing numerical challenges in introducing a reactive transport code into a land surface model: a biogeochemical modeling proof-of-concept with CLM–PFLOTRAN 1.0

Abstract. We explore coupling to a configurable subsurface reactive transport code as a flexible and extensible approach to biogeochemistry in land surface models. A reaction network with the Community Land Model carbon–nitrogen (CLM-CN) decomposition, nitrification, denitrification, and plant uptake is used as an example. We implement the reactions in the open-source PFLOTRAN (massively parallel subsurface flow and reactive transport) code and couple it with the CLM. To make the rate formulae designed for use in explicit time stepping in CLMs compatible with the implicit time stepping used in PFLOTRAN, the Monod substrate rate-limiting function with a residual concentration is used to represent the limitation of nitrogen availability on plant uptake and immobilization. We demonstrate that CLM–PFLOTRAN predictions (without invoking PFLOTRAN transport) are consistent with CLM4.5 for Arctic, temperate, and tropical sites.Switching from explicit to implicit method increases rigor but introduces numerical challenges. Care needs to be taken to use scaling, clipping, or log transformation to avoid negative concentrations during the Newton iterations. With a tight relative update tolerance (STOL) to avoid false convergence, an accurate solution can be achieved with about 50 % more computing time than CLM in point mode site simulations using either the scaling or clipping methods. The log transformation method takes 60–100 % more computing time than CLM. The computing time increases slightly for clipping and scaling; it increases substantially for log transformation for half saturation decrease from 10-3 to 10-9 mol m-3, which normally results in decreasing nitrogen concentrations. The frequent occurrence of very low concentrations (e.g. below nanomolar) can increase the computing time for clipping or scaling by about 20 %, double for log transformation. Overall, the log transformation method is accurate and robust, and the clipping and scaling methods are efficient. When the reaction network is highly nonlinear or the half saturation or residual concentration is very low, the allowable time-step cuts may need to be increased for robustness for the log transformation method, or STOL may need to be tightened for the clipping and scaling methods to avoid false convergence.As some biogeochemical processes (e.g., methane and nitrous oxide reactions) involve very low half saturation and thresholds, this work provides insights for addressing nonphysical negativity issues and facilitates the representation of a mechanistic biogeochemical description in Earth system models to reduce climate prediction uncertainty.

58 GEOSCIENCES↗

DOE OSTI2015

Forest floor community metatranscriptomes identify fungal and bacterial responses to N deposition in two maple forests

Anthropogenic N deposition alters patterns of C and N cycling in temperate forests, where forest floor litter decomposition is a key process mediated by a diverse community of bacteria and fungi. To track forest floor decomposer activity we generated metatranscriptomes that simultaneously surveyed the actively expressed bacterial and eukaryote genes in the forest floor, to compare the impact of N deposition on the decomposers in two natural maple forests in Michigan, USA, where replicate field plots had been amended with N for 16 years. Site and N amendment responses were compared using about 74,000 carbohydrate active enzyme transcript sequences (CAZymes) in each metatranscriptome. Parallel ribosomal RNA (rRNA) surveys of bacterial and fungal biomass and taxonomic composition showed no significant differences in either biomass or OTU richness between the two sites or in response to N. Site and N amendment were not significant variables defining bacterial taxonomic composition, but they were significant for fungal community composition, explaining 17 and 14% of the variability, respectively. The relative abundance of expressed bacterial and fungal CAZymes changed significantly with N amendment in one of the forests, and N-response trends were also identified in the second forest. Although the two ambient forests were similar in community biomass, taxonomic structure and active CAZyme profile, the shifts in active CAZyme profiles in response to N-amendment differed between the sites. One site responded with an over-expression of bacterial CAZymes, and the other site responded with an over-expression of both fungal and different bacterial CAZymes. Both sites showed reduced representation of fungal lignocellulose degrading enzymes in N-amendment plots. The metatranscriptome approach provided a holistic assessment of eukaryote and bacterial gene expression and is applicable to other systems where eukaryotes and bacteria interact.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

Calibrated simulation analysis for integration of evaporative cooling and radiant cooling system for different Indian climatic zones

Radiant cooling system (RCS) has proven to be an energy efficient system for meeting a building's cooling requirements. RCS is energy efficient and provides better thermal comfort compared to conventional all-air heating ventilation air conditioning (HVAC) system. To further improve the efficiency of RCS, a parallel evaporative cooling system (cooling tower) is coupled with RCS and analyzed for different climatic condition using calibrated model. A statistical analysis of weather files (based on wet bulb temperature), was used to identify the availability of useful water for cooling tower integration with RCS. A comprehensive simulation feasibility study of the application of cooling tower in RCS was performed for different cities to cover every climatic zones of India. It was found that in summer, the wet bulb temperature (WBT) of different climatic zones, except warm-humid, is suitable for the integration of cooling tower with RCS. An experimental setup was designed and developed for integration of parallel chiller and cooling tower with panel-based RCS for cooling and a dedicated outdoor air system (DOAS) for dehumidification and ventilation. Experiments were conducted for chiller and cooling tower operated RCS in Composite climate of Jaipur, Rajasthan, India. Building Energy Models (BEM) were developed for both the chiller-operated RCS and cooling tower-operated RCS in EnergyPlus and calibrated with the measured data. Using the calibrated models, performance of the system was analyzed for different climatic zones of India. A chiller-operated RCS was considered as a baseline to compare the annual energy saving potential and monthly performance of the cooling tower integrated RCS. Here, in the cooling tower–operated RCS, a total annual savings of 7% in hot and dry climates, 11% in composite climates and 20% in temperate climates was achieved compared to the chiller-operated RCS.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Linking Dissolved Organic Matter Composition to Landscape Properties in Wetlands Across the United States of America

Abstract Wetlands are integral to the global carbon cycle, serving as both a source and a sink for organic carbon. Their potential for carbon storage will likely change in the coming decades in response to higher temperatures and variable precipitation patterns. We characterized the dissolved organic carbon (DOC) and dissolved organic matter (DOM) composition from 12 different wetland sites across the USA spanning gradients in climate, landcover, sampling depth, and hydroperiod for comparison to DOM in other inland waters. Using absorption spectroscopy, parallel factor analysis modeling, and ultra‐high resolution mass spectroscopy, we identified differences in DOM sourcing and processing by geographic site. Wetland DOM composition was driven primarily by differences in landcover where forested sites contained greater aromatic and oxygenated DOM content compared to grassland/herbaceous sites which were more aliphatic and enriched in N and S molecular formulae. Furthermore, surface and porewater DOM was also influenced by properties such as soil type, organic matter content, and precipitation. Surface water DOM was relatively enriched in oxygenated higher molecular weight formulae representing HUP High O/C compounds than porewaters, whose DOM composition suggests abiotic sulfurization from dissolved inorganic sulfide. Finally, we identified a group of persistent molecular formulae (3,489) present across all sites and sampling depths (i.e., the signature of wetland DOM) that are likely important for riverine‐to‐coastal DOM transport. As anthropogenic disturbances continue to impact temperate wetlands, this study highlights drivers of DOM composition fundamental for understanding how wetland organic carbon will change, and thus its role in biogeochemical cycling.

Environmental Sciences & Ecology↗

DOE OSTI2014

Comprehensive ecosystem model-experiment synthesis using multiple datasets at two temperate forest free-air CO2 enrichment experiments: model performance and compensating biases

Free Air CO2 Enrichment (FACE) experiments provide a remarkable wealth of data to test the sensitivities of terrestrial ecosystem models (TEMs). In this study, a broad set of 11 TEMs were compared to 22 years of data from two contrasting FACE experiments in temperate forests of the south eastern US the evergreen Duke Forest and the deciduous Oak Ridge forest. We evaluated the models' ability to reproduce observed net primary productivity (NPP), transpiration and Leaf Area index (LAI) in ambient CO2 treatments. Encouragingly, many models simulated annual NPP and transpiration within observed uncertainty. Daily transpiration model errors were often related to errors in leaf area phenology and peak LAI. Our analysis demonstrates that the simulation of LAI often drives the simulation of transpiration and hence there is a need to adopt the most appropriate of hypothesis driven methods to simulate and predict LAI. Of the three competing hypotheses determining peak LAI (1) optimisation to maximise carbon export, (2) increasing SLA with canopy depth and (3) the pipe model the pipe model produced LAI closest to the observations. Modelled phenology was either prescribed or based on broader empirical calibrations to climate. In some cases, simulation accuracy was achieved through compensating biases in component variables. For example, NPP accuracy was sometimes achieved with counter-balancing biases in nitrogen use efficiency and nitrogen uptake. Combined analysis of parallel measurements aides the identification of offsetting biases; without which over-confidence in model abilities to predict ecosystem function may emerge, potentially leading to erroneous predictions of change under future climates.

Walker, Anthony P↗