Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Analysis of orientation-dependent deformation mechanisms in additively manufactured Zr using in-situ micromechanical testing: Twinning and orientation gradient

Here, orientation-dependent plasticity in zirconium (Zr)-alloy, which is produced through ultrasonic additive manufacturing (UAM) with subsequent hot-isostatic pressing (HIP), was analyzed by recording electron backscattered diffraction (EBSD) data during in-situ micromechanical testing. Three (0001) plane orientations of a hexagonal close-packed (HCP) structure were analyzed parallel to (1) the rolling direction [X||tensile direction (TD)], (2) the build direction [Z], and (3) the transverse direction [Y]. The analysis revealed that the grains with ~<0001>||TD show twin-dominant plasticity with three variants from {10 $\overline{1}$ 2}<$\overline{1}$ 011>; minor slipping with ($10\overline{1}$ 1)[$\overline{2}$ 113], and ($11\overline{2}$ 2)[$\overline{1} \overline{1}$ 23] pyramidal slip has also been observed. However, grains with orientation ~<0001>⊥TD are mainly sensitive to dislocations assisted plasticity-leading to orientation gradients formation. Furthermore, the neck formation was identified as originating from higher populated micro-crack locations and their association with localized plasticity at defect points in the UAM material. These results demonstrate that minimization of impurities to enable grain growth across prior foil interfaces makes HIP an effective methodology for producing Zr plate, with deformation characteristics expected for conventionally manufactured Zr.

36 MATERIALS SCIENCE↗

Persistence of crystal orientations across sub-micron-scale "super-grains" in self-organized Cu-W nanocomposites

We use precession electron diffraction to investigate the crystallographic character of copper (Cu)-tungsten (W) nanocomposites fabricated via physical vapor co-deposition at 400 oC. We observe sub-micron-scale regions, where apparently disconnected Cu and W grains have near identical crystallographic orientations. This persistence of grain orientations suggests Cu and W grains within these regions are interconnected in 3-D when they first form and may be considered as intercalated, sub-micron-scale "super-grains". Indeed, atom probe tomography provides direct evidence of 3-D interconnectivity of W domains. Our findings shed light on the structure and self organization mechanisms of nanocomposites formed by spontaneous phase separation of co-deposited metals.

Yadav, Digvijay↗

Stress-Induced Orientation of Cocontinuous Nanostructures within Randomly End-Linked Copolymer Networks

Randomly end-linked copolymer networks (RECNs) provide a robust route to self-assembled cocontinuous nanostructures. Here, we study the orientation of cocontinuous polystyrene/poly(D,L-lactide) (PS/PLA) RECNs induced by uniaxial stretching above the glass transition temperatures of the components. Small-angle X-ray scattering (SAXS) reveals that the domains initially undergo nonaffine stretching at low strain (ε < 0.4), followed by domain rotation at larger strains, yielding a “soft elastic” response and providing a high degree of orientation. Transmission electron microscopy (TEM) tomography confirms that stretching leads to topological changes in the nanostructure, corresponding to reorganization of domain interfaces. The combination of orientation at the molecular and nanostructural levels provides substantial improvements in yield strength, toughness, and stiffness. In addition to possibilities for improving mechanical properties, cocontinuous nanostructures with controlled levels of orientation have potential in a variety of contexts including directional ion transport and energy absorption.

42 ENGINEERING↗

Role of Quinones in Electron Transfer of PQQ–Glucose Dehydrogenase Anodes—Mediation or Orientation Effect

In this study, the influence of two quinones (1,2- and 1,4-benzoquinone) on the operation and mechanism of electron transfer in PQQ-dependent glucose dehydrogenase (PQQ–sGDH) anodes has been determined. Benzoquinones were experimentally explored as mediators present in the electrolyte. The electrochemical performance of the PQQ–sGDH anodes with and without the mediators was examined and for the first time molecular docking simulations were used to gain a fundamental understanding to explain the role of the mediator molecules in the design and operation of the enzymatic electrodes. It was proposed that the higher performance of the PQQ–sGDH anodes in the presence of 1,2- and 1,4-benzoquinones introduced in the solution is due to the shorter distance between these molecules and PQQ in the enzymatic molecule. It was also hypothesized that when 1,4-benzoquinone is adsorbed on a carbon support, it would play the dual role of a mediator and an orienting agent. At the same time, when 1,2-benzoquinone and ubiquinone are adsorbed on the electrode surface, the enzyme would transfer the electrons directly to the support, and these molecules would primarily play the role of an orienting agent.

Environmental Molecular Sciences Laboratory↗

Highly orientated growth and characterization of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films with different orientations on SrTiO{sub 3} substrates by chemical solution deposition method

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) thin films were successfully prepared on (100), (110), and (111) oriented SrTiO{sub 3} substrates by chemical solution deposition method. The structural, magnetic, and magnetotransport properties were systematically studied. X-ray diffraction θ-2θ and ϕ-scan measurements results show that all the films have perfect crystalline orientation and in-plane alignment. Both the Curie temperature and metal-insulator transition temperature are almost the same for all the three orientations, about 339 K. The magnetoresistance value (MR value, defined as (R{sub M} − R{sub 0})/R{sub 0} × 100%, where R{sub M} and R{sub 0} are the resistivity with and without applied magnetic field) for the films reaches maximum near the Curie temperature. Both the magnetization and MR value for (100) direction LSMO are the largest, and meanwhile for (111) direction are the smallest. The saturation magnetization decreases approximately proportional to T{sup 2} at low temperature (T < T{sub c}/2) for all the oriented film. Inversely, the resistivity increases proportional to T{sup 2} in the same temperature range, which can be attributed to the electron-electron scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconducting thin films of (100) and (111) oriented indium doped topological crystalline insulator SnTe

Recent discovery of the topological crystalline insulator SnTe has triggered a search for topological superconductors, which have potential application to topological quantum computing. The present work reports on the superconducting properties of indium doped SnTe thin films. The (100) and (111) oriented thin films were epitaxially grown by pulsed-laser deposition on (100) and (111) BaF2 crystalline substrates respectively. The onset superconducting transition temperatures are about 3.8 K for (100) and 3.6 K for (111) orientations, slightly lower than that of the bulk. Magneto-resistive measurements indicate that these thin films may have upper critical fields higher than that of the bulk. With large surface-to-bulk ratio, superconducting indium doped SnTe thin films provide a rich platform for the study of topological superconductivity and potential device applications based on topological superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial dislocations in (111) oriented (Ba 0.7 Sr 0.3 )TiO 3 films on SrTiO 3 single crystal

In this study, we have investigated the interfacial structure of epitaxial (Ba,Sr)TiO 3 films grown on (111)-oriented SrTiO 3 single-crystal substrates using transmission electron microscopy (TEM) techniques. Compared with the (100) epitaxial perovskite films, we observe dominant dislocation half-loop with Burgers vectors of a<110> comprised of a misfit dislocation along <112>, and threading dislocations along <110> or <100>. The misfit dislocation with Burgers vector of a <110> can dissociate into two ½ a <110> partial dislocations and one stacking fault. We found the dislocation reactions occur not only between misfit dislocations, but also between threading dislocations. Via three-dimensional electron tomography, we retrieved the configurations of the threading dislocation reactions. The reactions between threading dislocations lead to a more efficient strain relaxation than do the misfit dislocations alone in the near-interface region of the (111)-oriented (Ba 0.7 Sr 0.3 )TiO 3 films.

(Ba 0.7 Sr 0.3 )TiO 3↗

Orientation control and domain structure analysis of {100}-oriented epitaxial ferroelectric orthorhombic HfO{sub 2}-based thin films

Orientation control of {100}-oriented epitaxial orthorhombic 0.07YO{sub 1.5}-0.93HfO{sub 2} films grown by pulsed laser deposition was investigated. To achieve in-plane lattice matching, indium tin oxide (ITO) and yttria-stabilized zirconia (YSZ) were selected as underlying layers. We obtained (100)- and (001)/(010)-oriented films on ITO and YSZ, respectively. Ferroelastic domain formation was confirmed for both films by X-ray diffraction using the superlattice diffraction that appeared only for the orthorhombic symmetry. The formation of ferroelastic domains is believed to be induced by the tetragonal–orthorhombic phase transition upon cooling the films after deposition. The present results demonstrate that the orientation of HfO{sub 2}-based ferroelectric films can be controlled in the same manner as that of ferroelectric films composed of conventional perovskite-type material such as Pb(Zr, Ti)O{sub 3} and BiFeO{sub 3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Orientation and alignment effects in electron-induced ionization of a single oriented water molecule

We here report a theoretical study about the orientation effect on the total ionization cross sections for a single oriented water molecule. The theoretical description of the ionization process is performed within the first Born framework with a collisional system including an initial state composed of a projectile and a water target molecule described by a plane wave and an accurate one-center molecular wave function, respectively, and a final state constituted by a slow ejected electron represented by a Coulomb wave and a scattered (fast) electron projectile described by a plane wave. Secondary electron energetic distributions as well as total cross sections are then compared for particular target configurations pointing out strong alignment and orientation effects on the description of the ionization process.

74 ATOMIC AND MOLECULAR PHYSICS↗

The strength anisotropy of localized compaction: A model for the role of the nature and orientation of cross‐beds on the orientation and distribution of compaction bands in 3‐D

Abstract The field observations indicate that the low‐angle bed‐parallel compaction bands and the high‐angle‐to‐bedding compaction bands occur only in cross‐beds with certain range of bedding orientations in the Aztec Sandstone at the Valley of Fire State Park (NV). The hypothesis is that the primary underlying mechanical reason for this phenomenon is the strength anisotropy of localized compaction in anisotropic sandstones. In this paper, we used a quadratic failure criterion to describe the strength anisotropy of localized compaction and compared the results with the field data. The results show a clear relationship among the cross‐beds with (or without) compaction bands of certain orientations and the cross‐beds with relatively lower (or higher) calculated strength of localized compaction. We also used the quadratic failure criterion to fit the yield caps of anisotropic sandstones deformed in the laboratory by previous investigators and achieved some degree of success. These findings indicate that the strength anisotropy of localized compaction is an important factor controlling the compartmentalized distribution of compaction bands of various orientations in the aeolian sandstones.

Deng, Shang↗

Orientation gradients in relation to grain boundaries at varying strain level and spatial resolution

The resolution dependence of orientation gradients was studied in a well-annealed 99.9995% pure polycrystalline copper pulled to failure in tension. Owing to the well developed neck, different regions in the sample correspond to different tensile strains. Post-mortem characterization was performed using EBSD on cross-sections containing the tensile axis. Kernel average misorientation (KAM) was calculated as a metric to establish correlation between defect accumulation and microstructural features, with a threshold of 5° to focus on intra-granular gradients. The region with the lowest strain (2%) showed high KAM values adjacent to grain boundaries compared to the grain interior, regardless of the point spacing, i.e. the spatial resolution. However, in the region with the highest strain (13%) a strong dependence on resolution was found. For point spacings of 0.5 μm or smaller, the same correlation of high KAM with locations near boundaries was found. At coarse spacings i.e. low spatial resolution, by contrast, the reverse was found in that the highest KAM values appear in the grain interiors, as previously observed in X-ray microscopy on the same sample which had a similar coarse resolution. An analysis of orientation gradients parallel to, and perpendicular to boundaries suggested that the latter tend to be the larger of the two. This helps to explain why boundary-adjacent points have low KAM values. The conclusion is that measurement of local orientation gradient requires a resolution that is comparable to the dislocation substructure.

36 MATERIALS SCIENCE↗

Effect of orientation anisotropy on calculating effective electrical conductivities

This paper develops an analytical effective medium theory (EMT) equation for calculating the effective conductivity of a mixture based on Maxwell's and Maxwell-Garnett’s theories, extended to higher volume fractions using Bruggeman's unsymmetrical treatment (BUT), with a long term goal of extending the treatment to mixtures more representative of real materials in order to calculate their effective electrical conductivity. The development accounts for spheroid shaped inclusions of varying degrees of anisotropic orientation. The orientation is described by the introduction of a distribution function. Two methodologies valid for the inclusion dilute limit were used to evaluate the effective conductivity: one based on Maxwell's far field approach, and the other based on the Maxwell-Garnett in the matrix approach. It was found that while the dilute limit equations for the effective conductivity were different, the final EMT equations derived by applying BUT collapsed to the same formula which was generalized for anisotropic orientation based on the distribution function presented.

36 MATERIALS SCIENCE↗

Sound velocities in highly oriented pyrolytic graphite shocked to 18 GPa: Orientational order dependence and elastic instability

Previous reports of rapid phase transformation above 18 GPa [Erskine and Nellis, Nature 349, 317 (1991)] and large elastic waves below 18 GPa [Lucas et al., J. Appl. Phys. 114, 093515 (2013)] for shock-compressed ZYB-grade highly-oriented pyrolytic graphite (HOPG), but not for less oriented ZYH-grade HOPG, indicated a link between the orientational order dependence of the HOPG response above and below the phase transformation stress. To gain insight into this link and into the mechanical response of HOPG shocked to peak stresses approaching the phase transformation onset, the compressibility of ZYB- and ZYH-grade HOPG in the shocked state was examined using front surface impact experiments. Particle velocity histories and sound velocities were measured for peak stresses reaching 18 GPa. Although the locus of the measured peak stress-particle velocity states is indistinguishable for the two grades of HOPG, the measured sound velocities in the peak state reveal significant differences between the two grades. Specifically, 1) The measured sound velocities are somewhat higher for ZYH-grade HOPG, compared to ZYB-grade HOPG. 2) The measured sound velocities for ZYH-grade HOPG increase smoothly with compression, whereas those for ZYB-2 grade HOPG exhibit a significant reduction in the compression dependence from 12 GPa to 17 GPa and an abrupt increase from 17 GPa to 18 GPa. 3) The longitudinal moduli, determined from the measured sound velocities, are smaller than the calculated bulk moduli for ZYB-grade HOPG shocked to peak stresses above 15 GPa, indicating the onset of an elastic instability. The present findings demonstrate that the softening of the longitudinal modulus (or elastic instability) presented here is linked to the large elastic waves and the rapid phase transformation reported previously – all observed only for shocked ZYB-grade HOPG. The elastic instability in shocked ZYB-grade HOPG is likely a precursor to the rapid phase transformation observed above 18 GPa for this HOPG grade.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Orientation dependence of temporal and spectral properties of high-order harmonics in solids [Orientation dependence of high-harmonic temporal and spectral properties in solids]

We investigate the connection between crystal symmetry and temporal and spectral properties of high-order harmonics in solids. We calculate the orientation-dependent harmonic spectrum driven by an intense, linearly polarized infrared laser field, using a momentum-space description of the generation process in terms of strong-field-driven electron dynamics on the band structure. We show that the orientation dependence of both the spectral yield and the subcycle time profile of the harmonic radiation can be understood in terms of the coupling strengths and relative curvatures of the valence band and the low-lying conduction bands. In particular, we show that in some systems this gives rise to a rapid shift of a quarter optical cycle in the timing of harmonics in the secondary plateau as the crystal is rotated relative to the laser polarization. Here, we address recent experimental results in MgO and show that the observed change in orientation dependence for the highest harmonics can be interpreted in the momentum space picture in terms of the contributions of several different conduction bands.

74 ATOMIC AND MOLECULAR PHYSICS↗