Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orientation distribution function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Elucidating the Impact of Cis – Trans Organic Structure Directing Agent Isomer Ratios on the Aluminum Distribution Within SSZ-39

Despite their widespread use, the mechanisms governing the synthesis of zeolite catalysts are still poorly understood. A notable example of this problem is the uncertainty surrounding the influence of synthesis conditions on the placement of Al atoms in the zeolite framework which determines the active sites available for catalytic species. In this work, the role of the cis to trans isomer ratio of the OSDA N,N-dimethyl-3-5-dimethylpiperidinium on the energetics of 26 distinct Al pair distributions in SSZ-39 is examined both in the presence and absence of Na using density functional theory calculations. The initial orientation of the OSDA was found to have a significant impact on the final energies present, necessitating the screening of a large number of initial orientations with force field calculations and single point DFT calculations. Ground state energies were found to vary significantly with the ratio of cis to trans OSDAs with a Boltzmann distribution revealing the most likely Al pair distributions shift from sharing the same 8 membered rings to sharing the same double six membered rings to having no shared subunits as one increases the amount of cis OSDA present within the framework. The presence of Na was found to favor Al pair distributions where both Als occupied the same 6-membered ring. When an implicit solvent model was used to evaluate ground state energies the ideal Na sites shifted from 6-membered rings to empty SSZ-39 cages while OSDA positions and orientations remained largely the same. To provide insight on how kinetic factors may influence Al distributions, formation energies we calculated for connected double six membered rings. Further, these formation energies revealed a preference for Al pairs to occupy the same 4-membered ring which indicates kinetic and thermodynamic control may lead to different Al distributions in SSZ-39.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine learning bridges local static structure with multiple properties in metallic glasses

A long-standing challenge in the metallic glass (MG) community has been how to quantitatively gauge the influence of the intricate local packing environment on the response (such as the propensity for atomic rearrangement) of the atomic configuration to external stimuli. Here we establish this structure–property relation by representing the complex amorphous structure using a single, flexibility-orientated structural quantity. This structural flexibility (SF) couples to a bona fide structural representation, the pair distribution function (PDF) of individual atoms, through a weighting function that reflects what matters in the static atomic configuration to dynamic responses. Machine learning is used, employing microscopic flexibility volume as the supervisory signal, to establish via direct regression an optimized weighting vector, which is proven robust for all quenching rates, deformation conditions, and different compositions in a given (e.g., Cu x Zr 100-x ) alloy system. Additionally, the SF is evaluated solely from the particle positions (PDF), for any structure variation, from the atomic scale up to sample average. Strong correlations are demonstrated between SF and a broad range of properties, including vibrational, diffusional, as well as elastic and plastic relaxation responses.

36 MATERIALS SCIENCE↗

Long-range and local crystal structures of the S r 1 - x C a x Ru O 3 perovskites

Here, the crystal structures of the Sr 1–x Ca x RuO 3 (0 ≤ x ≤ 1) perovskites are investigated using both long-range and local structural probes. High-resolution synchrotron powder x-ray-diffraction characterization at ambient temperature shows that the materials have orthorhombic long-range crystal structures to high precision, and we support previous work showing that Ca 2+ substitution for Sr 2+ primarily changes the tilting of rigid corner-sharing RuO 6 octahedra at their shared oxygen vertices. X-ray pair-distribution function analysis for SrRuO 3 , CaRuO 3 , and one intermediate composition show them to display monoclinic symmetry at the local level; when averaged over different domain orientations this yields orthorhombic symmetry in the long range, and no long-range or local phase transitions are observed between 80 and 300 K for materials with intermediate compositions. High-resolution transmission electron microscopy shows that the Sr/Ca distribution is random at the nanoscale. Lastly, we plot magnetic characteristics such as the ferromagnetic T c , Curie-Weiss theta, effective moment, and ambient temperature susceptibility vs the octahedral tilt and unit-cell volume.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring the Spatial Control of Topotactic Phase Transitions Using Vertically Oriented Epitaxial Interfaces

Engineering oxygen vacancy formation and distribution is a powerful route for controlling the oxygen sublattice evolution that affects diverse functional behavior. The controlling of the oxygen vacancy formation process is particularly important for inducing topotactic phase transitions that occur by transformation of the oxygen sublattice. Here we demonstrate an epitaxial nanocomposite approach for exploring the spatial control of topotactic phase transition from a pristine perovskite phase to an oxygen vacancy-ordered brownmillerite (BM) phase in a model oxide La 0.7 Sr 0.3 MnO 3 (LSMO). Incorporating a minority phase NiO in LSMO films creates ultrahigh density of vertically aligned epitaxial interfaces that strongly influence the oxygen vacancy formation and distribution in LSMO. Combined structural characterizations reveal strong interactions between NiO and LSMO across the epitaxial interfaces leading to a topotactic phase transition in LSMO accompanied by significant morphology evolution in NiO. Using the NiO nominal ratio as a single control parameter, we obtain intermediate topotactic nanostructures with distinct distribution of the transformed LSMO-BM phase, which enables systematic tuning of magnetic and electrical transport properties. The use of self-assembled heterostructure interfaces by the epitaxial nanocomposite platform enables more versatile design of topotactic phase structures and correlated functionalities that are sensitive to oxygen vacancies.

36 MATERIALS SCIENCE↗

Processing and mechanical characterization of short carbon fiber-reinforced epoxy composites for material extrusion additive manufacturing

Fiber-reinforced polymer composites have been extensively utilized in recent years as feedstock materials for material extrusion additive manufacturing (AM) processes to improve strength, stiffness, and functionality of printed parts over unfilled printed polymers. However, the widespread adoption of AM of fiber-reinforced polymer composites requires a deeper understanding of the process-structure-property relationships in printed components, and such relationships are not well understood yet. Fiber length is critically important to the mechanical performance of short fiber composites, but very few studies to-date have focused on how the fiber length distribution (FLD) evolves during processing of composite feedstocks and how this evolution affects printing behavior and mechanical properties in 3D-printed composites. Here, FLD is measured for carbon fiber reinforced epoxy composites over a wide range of ink compositions and shear mixing times, and the distributions are fit with a Weibull-type distribution function. The effects of FLD on the tradeoff between ink processability, ink rheology, printing behavior and mechanical properties are investigated. Furthermore, the effects of printing parameters (nozzle size and print speed) on mechanical anisotropy and fiber orientation distribution (FOD) in printed composites are explored. Mechanical properties of printed composites are characterized via 3 pt-flexural testing, and microstructure is investigated using optical and scanning electron microscopy (SEM), and x-ray computed tomography. Finally, the fitted Weibull parameters are fed into a composite model that incorporates FLD and FOD, and model predictions are found to be in excellent agreement with experimental observations.

3D printing↗

Energy based fracture initiation criterion for strain-crystallizing rubber-like materials with pre-existing cracks

Fracture prediction is indispensable for polymers, like rubbers, which have a broad range of applications mainly due to their high extensibility. The phenomenon known as strain-induced crystallization further contributes to the fracture toughness of certain rubbers. Here in this study, a criterion based on internal bond energy, incorporating the effects of crystallization, is proposed to predict fracture initiation in rubber-like materials with pre-existing cracks. First, a multi-scale mechanical model is developed for characterizing the behavior of rubber when subjected to both uniaxial and biaxial deformation states. At the microscale, both the amorphous and crystalline chain segments are modeled as elastic in order to consider the energy contribution by the molecular bond distortions. This internal energy is considered along with the entropic and crystalline free energy for each chain. In the chain model, the effects of loading condition and the relative orientation of a chain on its crystallinity are taken into account. At the macroscopic scale, an existing crystallinity distribution function is adapted and a mixed finite element formulation with an augmented Lagrangian multiplier is utilized to impose the incompressibility constraint. A non-affine maximal advance path constraint based homogenization model is utilized for bridging the two scales. Its potential to account for anisotropy in the stretched network compels the model to be preferable due to its physical significance, for the purpose of fracture modeling. The rigidity of the crystallites is accounted for by proposing a crystallite distortion energy in addition to the critical bond dissociation energy, for fracture initiation to occur. The model is validated by comparison with existing experimental results for both crystallizing and non-crystallizing rubbers. In addition to its potential to predict the material behavior when subjected to uniaxial and biaxial loading, the capability of the model to quantitatively estimate the effect of crystallization on fracture initiation is also verified.

36 MATERIALS SCIENCE↗

Shear-Induced Conformations of Salt-Free Polyelectrolytes in Semidilute Solutions

Here, we present coarse-grained molecular dynamics simulations of salt-free polyelectrolyte chains in semidilute solutions under simple shear flow, with full hydrodynamic interactions and explicit dipolar solvent. At equilibrium, chain orientation statistics follow a pseudo-Voigt distribution, and the structural correlation length and chain end-to-end vector autocorrelation function exhibit scaling behavior consistent with theoretical predictions for polyelectrolytes. Under shear, chains transition from coiled to stretched states and the end-to-end vector autocorrelation function reveals oscillatory dynamics at high Weissenberg numbers. Analysis of the gyration tensor and shear strain distributions identified three distinct chain populations with directional alignment along and against the shear gradient. Compared with their neutral polymer counterparts, polyelectrolytes exhibit stronger shear thinning and enhanced chain alignment under the same Weissenberg number, which is attributed to electrostatic interactions and shear-induced counterion release. These findings provide molecular insight into the distinct flow response of charged polymers and have implications for tailoring the rheological properties of polyelectrolyte-based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ruddlesden–Popper Perovskites with Narrow Phase Distribution for Air-Stable Solar Cells

2D Ruddlesden-Popper perovskites have risen to prominence as stable and efficient photovoltaic materials because of their structural diversity, rich photophysics, and low moisture ingression. However, thin films processed from stoichiometric precursor solutions possess a broad phase distribution of different number of inorganic layers with random crystal orientation, crippling device performance. The effect of methylammonium chloride (MACI) and 3-amino4-phenolsulfonic acid (APSA) on the fabrication of perpendicularly oriented (PEA) 2 MA 4 Pb 5 I 16 films with narrow phase distribution using antisolvent and hot-casting processing techniques is investigated. MACI plays a critical role in suppressing parasitic n ≤ 2 and 3D-like phases. APSA performs the dual function of trap passivation and further narrowing phase polydispersity through strong coordination with Pb 2+ . Ex situ grazing-incident wide-angle X-Ray scattering (GIWAXS) and ultrafast spectroscopic characterization reveal uniformly mixed-phase distribution with disordered orientation in antisolvent treated films, while additive-assisted hot-casting treatment results in oriented, reverse-graded phase distribution, i.e., small-n on the film surface and large-n at the bottom. Arising thin films enable efficient p-i-n solar cells with an efficiency of 14.34%, and a V oc of 1.20 V, retaining 96% initial efficiency after 1440 h under ambient conditions (RH = 50-60%) without encapsulation.

36 MATERIALS SCIENCE↗

How the Size and Density of Charge-Transfer Excitons Depend on Heterojunction’s Architecture

We have characterized the size, intensity, density, and distribution of charge-transfer (CT) excitons as a function of the acceptor–donor architecture of prototypical organic interfaces. This characterization was done by computational analysis of 17 models of varying numbers, positions, and orientations of the donor and acceptor molecules. The models’ building blocks were phenyl-C61-butyric acid methyl ester (PCBM) fullerene acceptors and dual-band donor polymers composed of thiophene, benzothiadiazole, and benzotriazole subunits. The electronic structure of the donor–acceptor complexes was computed with the time-dependent long-range-corrected density-functional tight-binding method and analyzed with the fragment-based one-electron transition density matrix. In all models, the complexes with edge-on orientation have denser spectra of low-energy CT states lying below the absorption bands compared to the complexes with face-on orientation. This CT-state distribution in edge-on complexes provides a gate to efficiently populate cold CT excitons. Moreover, the cold CT excitons have a higher degree of charge separation in the edge-on than in the face-on complexes. The CT amount and the CT exciton size generally increase with the energy of the CT states, although the electron remains localized on a single molecule in cold CT states. Delocalization over two PCBM molecules was observed for high-energy CT states. The exciton size also depends on the orientation. Larger excitons are produced by the delocalization of the electrons perpendicularly to the interface. When the delocalization is parallel, the smaller electron–hole distances yield moderately sized CT excitons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deciphering the Scattering of Mechanically Driven Polymers Using Deep Learning

Here, we present a deep learning approach for analyzing two-dimensional scattering data of semiflexible polymers under external forces. In our framework, scattering functions are compressed into a three-dimensional latent space using a Variational Autoencoder (VAE), and two converter networks establish a bidirectional mapping between the polymer parameters (bending modulus, stretching force, and steady shear) and the scattering functions. The training data are generated using off-lattice Monte Carlo simulations to avoid the orientational bias inherent in lattice models, ensuring robust sampling of polymer conformations. The feasibility of this bidirectional mapping is demonstrated by the organized distribution of polymer parameters in the latent space. By integrating the converter networks with the VAE, we obtain a generator that produces scattering functions from given polymer parameters and an inferrer that directly extracts polymer parameters from scattering data. While the generator can be utilized in a traditional least-squares fitting procedure, the inferrer produces comparable results in a single pass and operates 3 orders of magnitude faster. This approach offers a scalable automated tool for polymer scattering analysis and provides a promising foundation for extending the method to other scattering models, experimental validation, and the study of time-dependent scattering data.

Ding, Lijie [Oak Ridge National Laboratory (ORNL),↗

Jet-hadron correlations with respect to the event plane in $\sqrt{s_{NN}}$ = 200 GeV Au + Au collisions in STAR

Angular distributions of charged particles relative to jet axes are studied in $\sqrt{s_{NN}}$ = 200 GeV Au+Au collisions as a function of the jet orientation with respect to the event plane. This differential study tests the expected path-length dependence of energy loss experienced by a hard-scattered parton as it traverses the hot and dense medium formed in heavy-ion collisions. A second-order event plane is used in the analysis as an experimental estimate of the reaction plane formed by the collision impact parameter and the beam direction. Charged-particle jets with 15 < 𝑝 T,jet < 20 and 20 < 𝑝 T,jet < 40 ⁢GeV/𝑐 were reconstructed with the anti-𝑘 T algorithm with radius parameter setting of 𝑅 = 0.4 in the 20–50% centrality bin to maximize the initial-state eccentricity of the interaction region. The reaction plane fit method is implemented to remove the flow-modulated background with better precision than prior methods. Yields and widths of jet-associated charged-hadron distributions are extracted in three angular bins between the jet axis and the event plane. The event-plane (EP) dependence is further quantified by ratios of the associated yields in different EP bins. No dependence on orientation of the jet axis with respect to the event plane is seen within the uncertainties in the kinematic regime studied. This finding is consistent with a similar experimental observation by ALICE in $\sqrt{s_{NN}}$ = 2.76 TeV Pb-Pb collision data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Integrating helicoid channels for passive control of fiber alignment in direct-write 3D printing

3D printing of fiber-reinforced composites has been receiving increasing attention as an efficient additive approach enabling lightweight, functional, and high-performance components required for industrial applications. The properties of fiber composites significantly depend on internal microstructures, including fiber orientation, distribution, and degree of alignment. Although multiple strategies have been introduced for controlling the fiber composites microstructures, these strategies are mostly active approaches relying on additional control of mechatronics parts, external forces, or intentionally introduced unstable flows inside narrow nozzles. These methods suffer from higher risk of nozzle clogging and requiring extra parts in 3D printing. Here, we introduce helicoid channels into extrusion system as a passive approach to control the fiber alignment without any additional moving parts in direct-write 3D printing. The helicoid channels automatically guide the composite inks and align fibers before flowing into narrow nozzle space, avoiding clogging and improving printability. The analyses indicate that both helicoid surface to volume ratio and helix angle affect the pre-alignment of fibers, leading to tunable mechanical properties of printed fiber-reinforced composites with increased stiffness and strength up to 77.6% and 47.8%, respectively.

36 MATERIALS SCIENCE↗

Effects of Zr addition on lattice strains and electronic structures of NbTaTiV high-entropy alloy

We report the room-temperature (RT) deformation behavior for two single-phase body-centered-cubic (BCC) refractory high-entropy alloys (RHEAs), NbTaTiV and NbTaTiVZr, has been comprehensively investigated via in-situ neutron-diffraction experiments. Our work shows that the addition of Zr leads to the transition of mechanical response from ductile to brittle behavior. The results of lattice-strain evolutions obtained from in-situ neutron diffraction for the ductile NbTaTiV RHEA exhibit atypical plastic-deformation behavior, i.e., the reduced plasticanisotropic deformation, leading to an even distribution of the applied stress amongst the grains with different orientations rather than forming stress concentrations in {200}-oriented grains during plastic-deformation. Density functional theory (DFT) analysis shows that NbTaTiVZr has a lower electron density at the Fermi level, larger lattice distortion, and stronger charge transfer, as compared to NbTaTiV, suggesting higher strength and lower ductility in NbTaTiVZr, which are consistent with the current experimental results.

36 MATERIALS SCIENCE↗

Multi-modal Free-moving Data Fusion (MFDF) v1.0

Multi-modal Free-moving Data Fusion (MFDF) is a python package that implements low and high-level functionality for performing qualitative and quantitative gamma-ray imaging analyses. Such analyses enable the use of gamma-ray spectrometers and/or imagers to estimate the distribution and quantity of radiological materials in an environment. Free-moving 3D imaging requires additional information about the 3D trajectory and orientation of the system, however all of these methods can be applied to 2D static gamma-ray imaging as well. The package includes methods (MLEM and MAP) for distributed source reconstruction, methods (PSL) for point source reconstruction, the ability to ingest and utilize quantitative detector response functions (for absolute analyses), and the ability to perform 3D estimation of dose-rates from quantitative reconstructions.

Joshi, Tenzing↗

Functional soft materials and methods of making and using thereof

Disclosed are functional materials for use in additive manufacturing (AM). The functional material can comprise an elastomeric composition (e.g., a silicone composite) for use in, for example, direct ink writing. The elastomeric composition can include and elastomeric resin, and a magnetic nanorod filler dispersed within the elastomeric resin. Nanorod characteristics (e.g., length, diameter, aspect ratio) can be selected to create 3D-printed constructs with desired mechanical properties along different axes. Furthermore, since nickel nanorods are ferromagnetic, the spatial distribution and orientation of nanorods within the continuous phase can be controlled with an external magnetic field. This level of control over the nanostructure of the material system offers another degree of freedom in the design of functional parts and components with anisotropic properties. Magnetic fields can be used to remotely sense compression of the constructs, or alternatively, control the stiffness of these materials.

Berkland, Cory↗

Functional soft materials and methods of making and using thereof

Disclosed are functional materials for use in additive manufacturing (AM). The functional material can comprise an elastomeric composition (e.g., a silicone composite) for use in, for example, direct ink writing. The elastomeric composition can include an elastomeric resin, and a magnetic nanorod filler dispersed within the elastomeric resin. Nanorod characteristics (e.g., length, diameter, aspect ratio) can be selected to create 3D-printed constructs with desired mechanical properties along different axes. Furthermore, since nickel nanorods are ferromagnetic, the spatial distribution and orientation of nanorods within the continuous phase can be controlled with an external magnetic field. This level of control over the nanostructure of the material system offers another degree of freedom in the design of functional parts and components with anisotropic properties. Magnetic fields can be used to remotely sense compression of the constructs, or alternatively, control the stiffness of these materials.

Berkland, Cory↗

Correlations between triaxial shapes and formation history of dark matter haloes

ABSTRACT The shape of dark matter (DM) haloes plays a critical role in constraining cosmology with upcoming large-scale structure surveys. In this paper, we study the correlations between the triaxial shapes and formation histories in DM haloes in the MultiDark Planck 2 N-body cosmological simulation. We find that halo ellipticity is strongly correlated with halo properties that serve as proxies of halo formation history, such as halo concentration and the normalized peak-centroid offset. These correlations are nearly independent of the halo density peak height. We present a simple model for the correlation between halo ellipticity and concentration using conditional abundance matching, and provide fitting formulae for the multidimensional distributions of triaxial halo shape as a function of halo peak height. We apply our halo shape model to gauge the effects of halo ellipticity and orientation bias on the excess surface mass density profiles in cluster-sized haloes. Our model should be useful for exploring the impact of triaxial halo shape on cosmological constraints in upcoming weak lensing surveys of galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Interfacial-Strain-Controlled Ferroelectricity in Self-Assembled BiFeO 3 Nanostructures

Self-assembled BiFeO 3 -CoFe 2 O 4 (BFO-CFO) vertically aligned nanocomposites are promising for logic, memory, and multiferroic applications, primarily due to the tunability enabled by strain engineering at the prodigious epitaxial vertical interfaces. However, local investigations directly revealing functional properties in the vicinity of such critical interfaces are often hampered by the size, geometry, microstructure, and concomitant experimental artifacts. Ferroelectric switching in the presence of lateral distributions of vertical strain thus remains relatively unexplored, with broader implications for all strain-engineered functional devices. Additionally, by implementing tomographic atomic force microscopy, 3D domain orientation mapping, and spatially-resolved ferroelectric switching movies, local tensile strain significantly impacts the ferroelectric switching, principally by retarding domain nucleation in the BFO nearest to the vertically epitaxial tensile-strained interfaces. The relaxed centers of the BFO pillars become preferred domain nucleation and growth sites for low biases, with up to an order of magnitude change in the edge:center switching ratio for high biases. The new, multi-dimensional imaging approach—and its corresponding insights especially for directly strained interface effects on local properties—thereby advances the fundamental understanding of polarization switching and provides design principles for optimizing functional response in confined nanoferroic systems.

36 MATERIALS SCIENCE↗