SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The primary tasks performed are: (1) the development of a second order local thermodynamic nonequilibrium (LTNE) model for atoms; (2) the continued development of vibrational nonequilibrium models; and (3) the development of a new multicomponent diffusion model. In addition, studies comparing these new models with previous models and results were conducted and reported.
This final report will attempt to concisely summarize the activities and accomplishments associated with NASA Grant and to include pertinent documents in an appendix. The project initially had one primary and several secondary objectives. The original primary objective was to couple into the NASA Johnson Space Center (JSC) nonequilibrium chemistry Euler equation entry vehicle flowfield code, INEQ3D, the Texas A&M University (TAMU) local thermodynamic nonequilibrium (LTNE) radiation model. This model had previously been developed and verified under NASA Langley and NASA Johnson sponsorship as part of a viscous shock layer entry vehicle flowfield code. The secondary objectives were: (1) to investigate the necessity of including the radiative flux term in the vibrational-electron-electronic (VEE) energy equation as well as in the global energy equation, (2) to determine the importance of including the small net change in electronic energy between products and reactants which occurs during a chemical reaction, and (3) to study the effect of atom-atom impact ionization reactions on entry vehicle nonequilibrium flowfield chemistry and radiation. For each, of these objectives, it was assumed that the code would be applicable to lunar return entry conditions, i.e. altitude above 75 km, velocity greater, than 11 km/sec, where nonequilibrium chemistry and radiative heating phenomena would be significant. In addition, it was tacitly assumed that as part of the project the code would be applied to a variety of flight conditions and geometries.
Elusive as dark matter particles are, they are not the only entities that can produce small energy releases deep inside the most sensitive detectors. Cosmogenic and residual radioactivity as well as other factors can produce and slowly accumulate long-living excitations and defect configurations in materials. Unsteady and avalanche-like releases of accumulated energy can limit the dynamic range of detectors and the sensitivity of experiments. This type of mechanism, while not widely discussed in the dark matter and neutrino detectors community, got a lot of attention in discussions about systems with energy flow in the context of nonequilibrium thermodynamic. Here this paper explores the avalanche hypothesis using published data on low-energy background in detectors and available condensed-matter physics information on excitations, defects, and energetic molecules which can be produced in detector materials and examine ways to use these models to understand the origin of low-energy background in dark matter and other detectors and for suppression of these backgrounds.
The primary accomplishments of the project were as follows: (1) From an overall standpoint, the primary accomplishment of this research was the development of a complete gasdynamic-radiatively coupled nonequilibrium viscous shock layer solution method for axisymmetric blunt bodies. This method can be used for rapid engineering modeling of nonequilibrium re-entry flowfields over a wide range of conditions. (2) Another significant accomplishment was the development of an air radiation model that included local thermodynamic nonequilibrium (LTNE) phenomena. (3) As part of this research, three electron-electronic energy models were developed. The first was a quasi-equilibrium electron (QEE) model which determined an effective free electron temperature and assumed that the electronic states were in equilibrium with the free electrons. The second was a quasi-equilibrium electron-electronic (QEEE) model which computed an effective electron-electronic temperature. The third model was a full electron-electronic (FEE) differential equation model which included convective, collisional, viscous, conductive, vibrational coupling, and chemical effects on electron-electronic energy. (4) Since vibration-dissociation coupling phenomena as well as vibrational thermal nonequilibrium phenomena are important in the nonequilibrium zone behind a shock front, a vibrational energy and vibration-dissociation coupling model was developed and included in the flowfield model. This model was a modified coupled vibrational dissociation vibrational (MCVDV) model and also included electron-vibrational coupling. (5) Another accomplishment of the project was the usage of the developed models to investigate radiative heating. (6) A multi-component diffusion model which properly models the multi-component nature of diffusion in complex gas mixtures such as air, was developed and incorporated into the blunt body model. (7) A model was developed to predict the magnitude and characteristics of the shock wave precursor ahead of vehicles entering the Earth's atmosphere. (8) Since considerable data exists for radiating nonequilibrium flow behind normal shock waves, a normal shock wave version of the blunt body code was developed. (9) By comparing predictions from the models and codes with available normal shock data and the flight data of Fire II, it is believed that the developed flowfield and nonequilibrium radiation models have been essentially validated for engineering applications.
With shifting environmental trends, many Earth system elements may be poised to undergo critical transitions or ‘tipping’. Reliable anticipation of these tipping elements is vital to inform policy decisions. Many of the current methods for tipping point detection are based on loss of resilience or ‘critical slowdown’ of the system as it approaches a tipping point. However, these methods are prone to false alarms; the detected slowdown may be an artifact of nonstationary noise unrelated to tipping behavior. Here, we explore the efficacy of early warning signs based on a nonequilibrium thermodynamics framework. The model-free detection method relies on the increased intrinsic time-irreversibility due to detailed balance breaking, preceding the onset of tipping or instabilities. We demonstrate that these EWSs are effective for tipping point detection and robust against false alarms due to nonstationary noise, using idealized models for two key elements of the Earth system that are prone to tipping: the Atlantic Meridional Overturning Circulation and Arctic sea-ice loss.
The fracture criteria upon which most fracture mechanics is based involves an energy balance that is not appropriate for the fracture mechanics of viscoelastic materials such as polymer matrix composites. A more appropriate criterion based upon nonequilibrium thermodynamics and involving a power balance rather than an energy balance is proposed. This crierion is based upon a reformulation of the second law of thermodynamics which focuses attention on the total Legendre transform of energy expressed as a functional over time and space. This excess energy functional can be shown to be equivalent to the Rice J integral if the only irreversible process is the propogation of a single crack completely through the thickness of the specimen and if the crack propogation is assured to be independent of time. For the more general case of more than one crack in a viscoelastic medium integration over both time and space is required. Two experimentally measurable parameters are proposed which should permit the evaluation of this more general fracture criterion.
The thermal-disequilibrium aspect of the problem of dust-particle formation from a gas phase in an open space environment is discussed in an effort to draw attention to the space condensation environment as an interesting arena for application and extension of the ideas and formalisms of nonequilibrium thermodynamics. It is shown that quasi-steady states with a disequilibrium between the gas-phase kinetic temperature and the condensed-phase internal temperature appear to be the norm of condensation environments in space. Consideration of the case of condensation onto a bulk condensed phase indicates that these quasi-steady states may constitute Prigogine dissipative structures. It is suggested that a proper study of the process of condensation in a space environment should include any effects arising from thermal disequilibrium.
A computer code has been developed that calculates radiative properties of nonequilibrium air in the low-density regimes expected during the flight of aeroassisted, orbital transfer vehicles. From the given nonequilibrium thermodynamic state variables, the code calculates number densities of internal states and the accompanying emission and absorption characteristics. In addition, the code calculates the number density of the hypothetical gas in radiative equilibrium that produces the same radiation emission as the given nonequilibrium gas. Sample results are shown to demonstrate how the code predicts the nonlinear variation of radiation with density at low densities.
A computer code has been developed that calculates radiative properties of nonequilibrium air in the low-density regimes expected during the flight of aeroassisted, orbital transfer vehicles. From the given nonequilibrium thermodynamic state variables, the code calculates number densities of internal states and the accompanying emission and absorption characteristics. In addition, the code calculates the number density of the hypothetical gas in radiative equilibrium that produces the same radiation emission as the given nonequilibrium gas. Sample results are shown to demonstrate how the code predicts the non-linear variation of radiation with density at low densities.
The computer programs developed to calculate the shock wave precursor and the method of using them are described. This method calculated the precursor flow field in a nitrogen gas including the effects of emission and absorption of radiation on the energy and composition of gas. The radiative transfer is calculated including the effects of absorption and emission through the line as well as the continuum process in the shock layer and through the continuum processes only in the precursor. The effects of local thermodynamic nonequilibrium in the shock layer and precursor regions are also included in the radiative transfer calculations. Three computer programs utilized by this computational scheme to calculate the precursor flow field solution for a given shock layer flow field are discussed.
Currently there exists no single unified approach for efficiently and accurately solving computational fluid dynamics (CFD) problems across the Mach number regime, from truly low speed incompressible flows to hypersonic speeds. There are several CFD codes that have evolved into sophisticated prediction tools with a wide variety of features including multiblock capabilities, generalized chemistry and thermodynamics models among other features. However, as these codes evolve, the demand placed on the end user also increases simply because of the myriad of features that are incorporated into these codes. In order for a user to be able to solve a wide range of problems, several codes may be needed requiring the user to be familiar with the intricacies of each code and their rather complicated input files. Moreover, the cost of training users and maintaining several codes becomes prohibitive. The objective of the current work is to extend the compressible, characteristic-based, thermochemical nonequilibrium Navier-Stokes code GASP to very low speed flows and simultaneously improve convergence at all speeds. Before this work began, the practical speed range of GASP was Mach numbers on the order of 0.1 and higher. In addition, a number of new techniques have been developed for more accurate physical and numerical modeling. The primary focus has been on the development of optimal preconditioning techniques for the Euler and the Navier-Stokes equations with general finite-rate chemistry models and both equilibrium and nonequilibrium thermodynamics models. We began with the work of Van Leer, Lee, and Roe for inviscid, one-dimensional perfect gases and extended their approach to include three-dimensional reacting flows. The basic steps required to accomplish this task were a transformation to stream-aligned coordinates, the formulation of the preconditioning matrix, incorporation into both explicit and implicit temporal integration schemes, and modification of the numerical flux formulae. In addition, we improved the convergence rate of the implicit time integration schemes in GASP through the use of inner iteration strategies and the use of the GMRES (General Minimized Resisual) which belongs to the class of algorithms referred to as Krylov subspace iteration. Finally, we significantly improved the practical utility of GASP through the addition of mesh sequencing, a technique in which computations begin on a coarse grid and get interpolated onto successively finer grids. The fluid dynamic problems of interest to the propulsion community involve complex flow physics spanning different velocity regimes and possibly involving chemical reactions. This class of problems results in widely disparate time scales causing numerical stiffness. Even in the absence of chemical reactions, eigenvalue stiffness manifests itself at transonic and very low speed flows which can be quantified by the large condition number of the system and evidenced by slow convergence rates. This results in the need for thorough numerical analysis and subsequent implementation of sophisticated numerical techniques for these difficult yet practical problems. As a result of this work, we have been able to extend the range of applicability of compressible codes to very low speed inviscid flows (M = .001) and reacting flows.
The Direct Discontinuous Galerkin (DDG (Liu and Yan, 2008)) method and a counterpart with Interface Correction (DDGIC (Danis and Yan, 2022)) are extended to compute diffusion terms that arise when solving the compressible multi-component flow equations in thermochemical nonequilibrium. Thermodynamic properties, transport properties, chemical reaction rates, and energy exchange terms are computed using Mutation++ (Scoggins et al., 2020). The DG method is applied on unstructured grids, where the accuracy and convergence rates can be sensitive to the numerical method chosen for parabolic terms. A method for determining the homogeneity tensor of the flow equations required for DDGIC is shown. The convergence properties of the DDG methods are studied and compared to the Interior Penalty (IP) method. A number of numerical experiments are conducted to assess the accuracy and performance of the method. The numerical results and convergence studies indicate that DDG and DDGIC provide accurate solutions and perform well for general flows in thermochemical nonequilibrium.
The need for energy-efficient recovery of organic solutes from aqueous streams is becoming more urgent as chemical manufacturing transitions toward nonconventional and bio-based feedstocks and processes. In addition to this, many aqueous waste streams contain recalcitrant organic contaminants, such as pharmaceuticals, industrial solvents, and personal care products, that must be removed prior to reuse. We observe that rigid carbon membrane materials can remove and concentrate organic contaminants via an unusual liquid-phase membrane permeation modality. Surprisingly, detailed thermodynamic calculations on the chemical potential of the organic contaminant reveal that the organic species has a higher chemical potential on the permeate side of the membrane than on the feed side of the membrane. This unusual observation challenges conventional membrane transport theory that posits that all permeating species move from high chemical potential states to lower chemical potential states. Based on experimental measurements, we hypothesize that the organic is concentrated in the membrane relative to water via favorable binding interactions between the organic and the carbon membrane. The concentrated organic is then swept through the membrane via the bulk flow of water in a modality known as “sorp-vection.” We highlight via simplified nonequilibrium thermodynamic models that this “uphill” chemical potential permeation of the organic does not result in second-law violations and can be deduced via measurements of the organic and water sorption and diffusion rates into the carbon membrane. Moreover, this work identifies the need to consider such nonidealities when incorporating unique, rigid materials for the separations of aqueous waste streams.
This research concerns the modeling and numerical solutions of the coupled system of compressible Navier-Stokes equations in cylindrical coordinates under conditions of equilibrium and nonequilibrium thermodynamics. The problem considered was the modeling of a high temperature diatomic gas N2 flowing through a converging-diverging high expansion nozzle. The problem was modeled in two ways. The first model uses a single temperature with variable specific heats as functions of this temperature. For the second model we assume that the various degrees of freedom all have a Boltzmann distribution and that there is a continuous redistribution of energy among the various degrees of freedom as the gas passes through the nozzle. Each degree of freedom is assumed to have its own temperature and, consequently, each system state can be characterized by these temperatures. This suggests that formulation of a second model with a vibrational degree of freedom along with a rotational-translation degree of freedom, each degree of freedom having its own temperature. Initially the vibrational degree of freedom is excited by heating the gas to a high temperature. As the high temperature gas passes through the nozzle throat there is a sudden drop in temperature along with a relaxation time for the vibrational degree of freedom to achieve equilibrium with the rotational-translation degree of freedom. That is, we assume that the temperature change upon passing through the throat is so great that the changes in the vibrational degree of freedom occur at a much slower pace and consequently lags behind the rotational-translational energy changes. This lag results in a finite relaxation time. In this context the term nonequilibrium is used to denote the fact that the energy content of the various degrees of freedom are characterized by two temperatures. We neglect any chemical reactions which could also add nonequilibrium effects. We develop the energy equations for the nonequilibrium model from first principles. The resulting equations, which model the nozzle flow, can be expressed in various forms. In most forms the resulting equations are coupled systems of nonlinear partial differential equations subject to certain boundary conditions. To solve the resulting coupled system of nonlinear partial differential equations, several numerical techniques were investigated: (1) the explicit MacCormack method, (2) the explicit-implicit MacCormack method, (3) the method of operator splitting, (4) factorization schemes, and (5) the Steger-Warming scheme.
The common wisdom that volume decreases with pressure and increases with temperature is analyzed in terms of Hillert nonequilibrium thermodynamics in the present work. It is shown that the derivative of volume to pressure in a stable system is always negative, i.e., volume decreases with the increase of pressure, when all other natural variables of the system are kept constant. This originates from the stability requirement that the conjugate variables, such as volume and negative pressure, must change in the same direction in a stable system. Consequently, since volume and temperature are not conjugate variables, they do not have to change in the same direction and thus do change in opposite directions in both natural and man-made systems. It is shown that the decrease of volume with the increase of temperature, commonly referred as negative thermal expansion (NTE) in the literature, originates from the statistical competitions of configurations in the system when the volumes of metastable configurations are smaller than that of the ground-state configuration. As a result, it is demonstrated that the zentropy theory can concisely explain and accurately predict NTE based on the density functional theory without fitting parameters.
The net rate of a reversible chemical reaction is the difference between unidirectional rates of traversal along forward and reverse reaction paths. In a multistep reaction sequence, the forward and reverse trajectories, in general, are not the microscopic reverse of one another; rather, each unidirectional route is comprised of distinct rate-controlling steps, intermediates, and transition states. Consequently, traditional descriptors of rate (e.g., reaction orders) do not reflect intrinsic kinetic information but instead conflate unidirectional contributions determined by (i) the microscopic occurrence of forward/reverse reactions (i.e., unidirectional kinetics) and (ii) the reversibility of reaction (i.e., nonequilibrium thermodynamics). This review aims to provide a comprehensive resource of analytical and conceptual tools which deconvolute the contributions of reaction kinetics and thermodynamics to disambiguate unidirectional reaction trajectories and precisely identify rate- and reversibility-controlling molecular species and steps in reversible reaction systems. The extrication of mechanistic and kinetic information from bidirectional reactions is accomplished through equation-based formalisms (e.g., De Donder relations) grounded in principles of thermodynamics and interpreted in the context of theories of chemical kinetics developed in the past 25 years. Here, the aggregate of mathematical formalisms detailed herein is general to thermochemical and electrochemical reactions and encapsulates a diverse body of scientific literature encompassing chemical physics, thermodynamics, chemical kinetics, catalysis, and kinetic modeling.
Transport of charge and valley (axial) degrees of freedom coupled to order-parameter dynamics in magnetic Weyl semimetals is studied in the framework of nonequilibrium thermodynamics. In addition to the established valley-related transport anomalies that are rooted in band-structure topology, we construct dissipative couplings between the three dynamic constituents of the system driven out of equilibrium by electromagnetic perturbations. We show how the valley degree of freedom mediates an effective coupling between the charge and magnetic sectors of the system, through a combination of the chiral anomaly, on the electric side, and the Onsager-paired valley torque and pumping, on the magnetic side. This work complements previous studies of magnetic Weyl semimetals by a more systematic analysis of collective dissipation. We discuss several concrete examples of the valley-mediated current-driven magnetic instabilities and charge pumping, and extend the theory to the antiferromagnetic case.
Silicon polymorphs with exotic electronic and optical properties have recently attracted significant attention due to their wide range of useful band gap characteristics. They are typically formed by static high-pressure techniques, which limits the crystal structures that can be made. This constitutes a major obstacle to study these polymorphs and their incorporation into existing technology. Approaches have attempted to address this shortcoming through using dynamic conditions and chemical precursor materials. Here, we report on an approach to create unusual crystal structures deep in the bulk of a silicon crystal by irradiating it with a laser pulse at ultrarelativistic intensity of up to 7.5 × 10 19 W/ c m 2 . Laser-generated electrons with MeV energy swiftly penetrate the target with speed close to the speed of light and deposit their energy into a large volume across the whole thickness of the sample. The relativistic electron current creates, via branching propagation and ionization, high-energy-density conditions for thermodynamically nonequilibrium phase transformation paths into new crystal polymorphs. X-ray microdiffraction and synchrotron x-ray diffraction analyses indicate, along with conventional dc-Si, the presence of exotic silicon structures in the bulk of the laser intact target volume. These structures are identified as body-centered bc8-Si, rhombohedral r8-Si, hexagonal-diamond hd-Si, and the tetragonal Si-VIII, all phases of Si that have previously been made through static techniques. Additionally, simple-tetragonal st12-Si and body-centered tetragonal bt8-Si were observed along with signatures of not yet identified diffraction spots. Both st12-Si and bt8-Si have only been observed in ultrafast laser microexplosion conditions at much lower laser intensity ∼ 10 14 W/ c m 2 and within a micron-thin surface layer. The findings here are supported by direct observation of nanoparticles with high-resolution transmission electron microscopy and corresponding fast Fourier transform analysis of their interatomic distances. The presented analyses of absorbed laser energy, generation of the MeV electron current, and deposition of energy across the whole target thickness provide a solid basis for drawing the conclusion that the observed silicon polymorphs were produced because of laser-generated high-energy electrons fast-penetrating deeply into the bulk of silicon. In contrast to solid-solid transformations, the plasma-solid transitions offer a paradigm for the creation of exotic, high-energy density materials inside the bulk of the sample by using laser pulses at relativistic intensities. Published by the American Physical Society 2024