Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “navigation performance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Real-Time EDL Navigation Performance Using Spacecraft to Spacecraft Radiometric Data

A two-year task sponsored by NASA's Mars Technology Program's Advanced Entry, Descent and Landing (EDL) work area includes investigation of improvements to EDL navigation by processing spacecraft-to-spacecraft radiometric data. Spacecraft-to- spacecraft navigation will take advantage of the UHF link between two spacecraft (i.e. to an orbiter from an approaching lander for EDL telemetry relay) to build radiometric data, specifically the velocity between the two spacecraft along the radio beam, that are processed to determine position and velocity in real time. The improved onboard state knowledge provided by spacecraft-to-spacecraft navigation will improve the performance of entry guidance by providing a more accurate state estimate and ultimately reduce the landed position error. Work on the final year of this task is reported here.

descent↗
NASA NTRSDate not supplied

Lucy Optical Navigation Performance During The (152830) Dinkinesh Encounter

The Lucy Jupiter-Trojan asteroid mission launched in November 2021. Its original mission concept included six small-body encounters over its 12-year primary mission. In the fall of 2022, an additional target of opportunity encounter was proposed to be executed in the fall of 2023. The encounter with (152830) Dinkinesh (previously 1999 VD57) presented myriad imaging, navigation, engineering, and planning challenges, as well as a chance to exercise and further refine the Optical NavigationSystem concept of operations, interfaces, and tools. Dinkinesh would be the smallest and dimmest target Lucy would encounter, with a higher uncertainty in these physical parameters than for other targets. While the Op Nav system and instruments carried a high amount of heritage from the New Horizons and OSIRIS-REx missions, this would be the first use of these systems on Lucy for navigation purposes. Despite these additional challenges, the Lucy Dinkinesh encounter was a resounding success throughout which the navigational system exceeded requirements.1Optical Navigation was successfully performed and fed into the orbit determination and trajectory maneuver activities up to the final knowledge update. The Dinkinesh encounter also proved to be greatly scientifically interesting, if not additionally challenging, as the Dinkinesh system was discovered to be a binary system through imaging during closest approach, and the secondary body was itself found to be a contact binary. This added complexity notwithstanding, the OpNav and OD teams were able to re-construct the close-approach trajectory of Dinkinesh in cooperation and concert with the Lucy Science Team’s shape modelling efforts.

Erik Lessac-Chenen↗
NASA NTRSDate not supplied

Precision Landing Navigation Performance of Human-Scale Lunar and Mars Landers

To meet the unique challenges of crewed Lunar and Mars precision landings, NASA’s Safe and Precise Landing Integrated Capabilities Evolution project has worked to advance autonomous spacecraft navigation by increasing the technology readiness level of key deorbit, entry, descent, and landing systems, including navigation sensors. Different sensors and their effects on overall system performance are evaluated using six-degree-of-freedom simulations with physics-based engineering models that capture the relevant vehicle systems and environmental effects. Building on an existing simulation framework, this work demonstrates how improved modeling fidelity enables rapid and detailed assessment of various navigation sensors on human-scale Lunar and Mars landing vehicles using NASA reference architectures.

navigation↗
NASA NTRSDate not supplied

Osiris-Rex Post-Tag Observation Trajectory Design and Navigation Performance

NASA’s OSIRIS-REx spacecraft successfully collected a sample of asteroid regolith from the surface of near-Earth asteroid Bennu in October of 2020. Subsequent imaging of the sampler head showed material leaking from the collection mechanism, thus stowage of the sample precluded execution of any planned maneuvers in the following days. Optical navigation imaging also ceased in the days following sample collection. The desire to image the sample site to investigate the results of the spacecraft-to-surface interaction led to the Navigation team designing a trajectory to return to Bennu after several months in order to image the surface one final time. After several iterations a trajectory design was created that satisfied the numerous constraints that were levied in order to place utmost importance on the safety of the spacecraft and stowed sample, while also closely emulating previously obtained imaging conditions to provide a close comparison of site pre- and post-contact. Significant analysis was necessary in order to reliably reacquire the asteroid after several months without optical navigation imagery. The final design required five maneuvers to return the spacecraft to Bennu and perform a final flyby of the asteroid at a distance of 3.8 kilometers. Successful execution of the phase provided key insights regarding the performance of the sample collection activities and the subsurface composition of the asteroid.

Daniel R Wibben↗
NASA NTRS2005

Expected EDL navigation performance with spacecraft to spacecraft data

Pinpoint landing (defined for the purpose of this discussion as landing within 1km of a preselected target) is a key Advanced Entry, Descent and Landing (EDL) technology for future Mars landers. Key scientific goals for Mars exploration, such as the search for water and characterization of aqueous process on Mars, the study of mineralogy and weathering of the Martian surface and the search for preserved biosignatures in Martian rocks, requires placing landers at pre-defined locations of greatest scientific interest. The capability to land within 1 km of a pre-defined landing site will improve safety and enable landing within roving range of sites of scientific interest while avoiding hazardous areas. A critical component of the closed-loop guidance, navigation and control (GN&C) system required for pinpoint landing is position and velocity estimation in real time. Spacecraft-to-spacecraft navigation will take advantage of the UHF link between two spacecraft (i.e. to an orbiter from an approaching lander for EDL telemetry relay) to build radiometric data, specifically the velocity between the two spacecraft along the radio beam, that are processed to determine position and velocity in real time. The improved onboard state knowledge provided by spacecraft-to-spacecraft navigation will reduce the landed position error and improve the performance of entry guidance. Results from the first of two years planned for this effort are documented here, including selection and documentation of prototype algorithms that will go forward into flight code along with analysis results used to define the algorithm set.

descent and landing↗
NASA NTRS2019

Navigation performance of the 2018 InSight Mars Lander mission

The NASA InSight spacecraft was launched successfully from Vandenberg Air Force Base on an Atlas V 401 launch vehicle on May 5, 2018 and landed on November 26, 2018. Accurate targeting to the atmospheric entry point by the Navigation team achieved by carefully controlling the final entry flight path angle to -12.0 degrees with a tolerance of +/- 0.21 degrees. This paper will describe how the InSight Navigation team met this difficult task in the presence of frequent unbalanced thrusting for attitude control. The continuous correction for this unplanned ∆V far exceeded pre-launch expectations and proved a challenge to predict accurately.

Wallace, Mark↗
NASA NTRS2012

Autonomous Navigation Performance During The Hartley 2 Comet Flyby

On November 4, 2010, the EPOXI spacecraft performed a 700-km flyby of the comet Hartley 2 as follow-on to the successful 2005 Deep Impact prime mission. EPOXI, an extended mission for the Deep Impact Flyby spacecraft, returned a wealth of visual and infrared data from Hartley 2, marking the fifth time that high-resolution images of a cometary nucleus have been captured by a spacecraft. The highest resolution science return, captured at closest approach to the comet nucleus, was enabled by use of an onboard autonomous navigation system called AutoNav. AutoNav estimates the comet-relative spacecraft trajectory using optical measurements from the Medium Resolution Imager (MRI) and provides this relative position information to the Attitude Determination and Control System (ADCS) for maintaining instrument pointing on the comet. For the EPOXI mission, AutoNav was tasked to enable continuous tracking of a smaller, more active Hartley 2, as compared to Tempel 1, through the full encounter while traveling at a higher velocity. To meet the mission goal of capturing the comet in all MRI science images, position knowledge accuracies of +/- 3.5 km (3-?) cross track and +/- 0.3 seconds (3-?) time of flight were required. A flight-code-in-the-loop Monte Carlo simulation assessed AutoNav's statistical performance under the Hartley 2 flyby dynamics and determined optimal configuration. The AutoNav performance at Hartley 2 was successful, capturing the comet in all of the MRI images. The maximum residual between observed and predicted comet locations was 20 MRI pixels, primarily influenced by the center of brightness offset from the center of mass in the observations and attitude knowledge errors. This paper discusses the Monte Carlo-based analysis that led to the final AutoNav configuration and a comparison of the predicted performance with the flyby performance.

flyby↗
NASA NTRSDate not supplied

Flight Dynamics and Navigation Performance of the BioSentinel Mission

BioSentinel was one of the ten 6U CubeSats launched by the Space Launch System (SLS) as part of the Artemis-I mission on November 16th, 2022. The spacecraft was deployed after the trans-lunar injection imparted by the upper stage of SLS, and performed a lunar flyby that provided the necessary energy to escape the Earth-Moon system into heliocentric space. The BioSentinel mission required flight dynamics support prior to flight to assess the deployment conditions and the trajectory design, as well as navigation support during flight, to provide orbit determination solutions for the mission and the Deep Space Network (DSN). This paper discusses the BioSentinel mission flight dynamics campaign, from mission design to the challenges and lessons learned encountered during flight.

Astrodynamics↗
NASA NTRS2024

Navigation Performance Overview of Gateway During a Lunar Lander Mission

Starting with Artemis IV, the human lander system (HLS) missions will utilize the Gateway as a staging point in a near rectilinear halo orbit (NRHO) between cislunar space and the lunar surface. The presence of a crew, Orion, and HLS will cause significant perturbations from docking and venting, while attitude requirements on Gateway can cause structural antenna blockage. The HLS mission timeline and perturbations are simulated considering antenna blockage to ground stations. Simulated DSN tracking data is generated and processed to produce a navigation state estimate for orbit maintenance maneuver (OMM) targeting. The starting epoch is varied to adjust tracking availability, and the volume of tracking data processed is reduced. Separately, the observability of perturbations in the NRHO with two-way tracking data is analyzed. The mission is simulated with imperfect knowledge of venting perturbations, and finally the estimation errors from propagating an estimated state from data cutoff (DCO) to maneuvers are investigated.

Clark P Newman↗
NASA NTRS2019

Early Navigation Performance of the OSIRIS-REx Approach to Bennu

The New Frontiers-class OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, Security-Regolith Explorer) mission is the first American endeavor to return a sample from an asteroid. In preparation for retrieving the sample, OSIRIS-REx is conducting a campaign of challenging proximity-operations maneuvers and scientific observations, bringing the spacecraft closer and closer to the surface of near-Earth asteroid (101955) Bennu. Ultimately, the spacecraft will enter a 900-meter-radius orbit about Bennu and conduct a series of reconnaissance flybys of candidate sample sites before being guided into contact with the surface for the Touch and Go sample collection event. Between August and December 2018, the OSIRIS-REx team acquired the first optical observations of Bennu and used them for navigation. We conducted a series of maneuvers with the main engine, Trajectory Correction Maneuver, and Attitude Control System thruster sets to slow the OSIRIS-REx approach to Bennu and achieve rendezvous on December 3, 2018. This paper describes the trajectory design, navigation conops, and key navigation results from the Approach phase of the OSIRIS-REx mission.

Antreasian, Peter G.↗
NASA NTRS2015

OSIRIS-REx Touch-And-Go (TAG) Navigation Performance

The Origins Spectral Interpretation Resource identification Security Regolith Explorer (OSIRIS-REx) mission is a NASA New Frontiers mission launching in 2016 to rendezvous with the near-Earth asteroid (101955) Bennu in late 2018. Following an extensive campaign of proximity operations activities to characterize the properties of Bennu and select a suitable sample site, OSIRIES-REx will fly a Touch-And-Go (TAG) trajectory to the asteroid's surface to obtain a regolith sample. The paper summarizes the mission design of the TAG sequence, the propulsive required to achieve the trajectory, and the sequence of events leading up to the TAG event. The paper will summarize the Monte-Carlo simulation of the TAG sequence and present analysis results that demonstrate the ability to conduct the TAG within 25 meters of the selected sample site and +-2 cms of the targeted contact velocity. The paper will describe some of the challenges associated with conducting precision navigation operations and ultimately contacting a very small asteroid.

Spectral↗
NASA NTRS2015

OSIRI-REx Touch and Go (TAG) Navigation Performance

The Origins Spectral Interpretation Resource Identification Security Regolith Explorer (OSIRIS-REx) mission is a NASA New Frontiers mission launching in 2016 to rendezvous with the near-Earth asteroid (101955) Bennu in late 2018. Following an extensive campaign of proximity operations activities to characterize the properties of Bennu and select a suitable sample site, OSIRIS-REx will fly a Touch-And-Go (TAG) trajectory to the asteroid's surface to obtain a regolith sample. The paper summarizes the mission design of the TAG sequence, the propulsive maneuvers required to achieve the trajectory, and the sequence of events leading up to the TAG event. The paper also summarizes the Monte-Carlo simulation of the TAG sequence and presents analysis results that demonstrate the ability to conduct the TAG within 25 meters of the selected sample site and 2 cm/s of the targeted contact velocity. The paper describes some of the challenges associated with conducting precision navigation operations and ultimately contacting a very small asteroid.

Security Regolith Explorer↗