Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multicomponent analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Use of near infrared correlation spectroscopy for quantitation of surface iron, absorbed water and stored electronic energy in a suite of Mars soil analog materials

A number of questions concerning the surface mineralogy and the history of water on Mars remain unresolved using the Viking analyses and Earth-based telescopic data. Identification and quantitation of iron-bearing clays on Mars would elucidate these outstanding issues. Near infrared correlation analysis, a method typically applied to qualitative and quantitative analysis of individual constituents of multicomponent mixtures, is adapted here to selection of distinctive features of a small, highly homologous series of Fe/Ca-exchanged montmorillonites and several kalinites. Independently determined measures of surface iron, relative humidity and stored electronic energy were used as constituent data for linear regression of the constituent vs. reflectance data throughout the spectral region 0.68 to 2.5 micrometers. High correlations were found in appropriate regions for all three constituents, though that with stored energy is still considered tenuous. Quantitation was improved using 1st and 2nd derivative spectra. High resolution data over a broad spectral range would be required to quantitatively identify iron-bearing clays by remotely sensed reflectance.

Coyne, Lelia M.↗
DOE OSTI2024

Bayesian inference of multi-messenger astrophysical data: Joint and coherent inference of gravitational waves and kilonovae

Multi-messenger observations of binary neutron star mergers can provide information on the neutron star’s equation of state (EOS) above the nuclear saturation density by directly constraining the mass-radius diagram. We present a Bayesian framework for joint and coherent analyses of multi-messenger binary neutron star signals. As a first application, we analyze the gravitational-wave GW170817 and the kilonova (kN) AT2017gfo data. These results are then combined with the most recent X-ray pulsar analyses of PSR J0030+0451 and PSR J0740+6620 to obtain new EOS constraints.We extend the bajes infrastructure with a joint likelihood for multiple datasets, support for various semi-analytical kN models, and numerical-relativity (NR)-informed relations for the mass ejecta, as well as a technique to include and marginalize over modeling uncertainties. The analysis of GW170817 used the TEOBResumS effective-one-body waveform template to model the gravitational-wave signal. The analysis of AT2017gfo used a baseline multicomponent spherically symmetric model for the kN light curves. Various constraints on the mass-radius diagram and neutron star properties were then obtained by resampling over a set of ten million parameterized EOSs, which was built under minimal assumptions (general relativity and causality).

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

Dynamics of rotating multicomponent turbomachinery systems

The ultimate objective of turbomachinery vibration analysis is to predict both the overall, as well as component dynamic response. To accomplish this objective requires complete engine structural models, including multistages of bladed disk assemblies, flexible rotor shafts and bearings, and engine support structures and casings. In the present approach each component is analyzed as a separate structure and boundary information is exchanged at the inter-component connections. The advantage of this tactic is that even though readily available detailed component models are utilized, accurate and comprehensive system response information may be obtained. Sample problems, which include a fixed base rotating blade and a blade on a flexible rotor, are presented.

Lawrence, Charles↗
NASA NTRS1993

ULF waves in the Io torus: Ulysses observations

Throughout the Io torus, Ulysses has observed intense ultralow frequency (ULF) wave activity in both electric and magnetic components. Such ULF waves have been previously suggested as the source of ion precipitation leading to Jovian aurorae. The peaks of the wave spectra are closely related to the ion cyclotron frequencies, which is evidence of the waves being ion cyclotron waves (ICWs). Analysis of the dispersion relation using a multicomponent density model shows that at high latitudes (approximately 30 deg), peak frequencies of the waves fall into L mode branches of guided or unguided ICWs. Near the equator, in addition to the ICWs below f(sub cO(2+)), there are strong signals at approximately 10 Hz which require an unexpectedly large energetic ion temperature anistropy to be explained by the excitation of either convective or nonconvective ion cyclotron instabilities. Their generation mechanism remains open for the future study. Evaluation of the Poynting vector and the dispersion relation analysis suggest that the waves near the equator had a small wave angle relative to the magnetic field, while those observed at high latitudes were more oblique. The polarization of the waves below f(sub cH(+)) is more random than that of the whistler mode waves, but left-hand-polarized components of the waves can still be seen. The intensity of the ICWs both near the equator and at high latitudes are strong enough to meet the requirement for producing strong pitch angle scattering of energetic ions.

Lin, Naiguo↗
NASA NTRS1988

Analysis of positron lifetime spectra in polymers

A new procedure for analyzing multicomponent positron lifetime spectra in polymers was developed. It requires initial estimates of the lifetimes and the intensities of various components, which are readily obtainable by a standard spectrum stripping process. These initial estimates, after convolution with the timing system resolution function, are then used as the inputs for a nonlinear least squares analysis to compute the estimates that conform to a global error minimization criterion. The convolution integral uses the full experimental resolution function, in contrast to the previous studies where analytical approximations of it were utilized. These concepts were incorporated into a generalized Computer Program for Analyzing Positron Lifetime Spectra (PAPLS) in polymers. Its validity was tested using several artificially generated data sets. These data sets were also analyzed using the widely used POSITRONFIT program. In almost all cases, the PAPLS program gives closer fit to the input values. The new procedure was applied to the analysis of several lifetime spectra measured in metal ion containing Epon-828 samples. The results are described.

Singh, Jag J.↗
DOE OSTI2022

Multicomponent gas mixture parametric CFD study of condensation heat transfer in small modular reactor system safety

Safety is always the primary concern for designing and analyzing nuclear reactor systems. The requirements for the safety margin for advanced small modular reactor (SMR) systems are targeted even higher than the conventional commercial large-scale nuclear reactors incorporating the passive and inherent safety systems. The SMR systems are designed with the condensation passive containment cooling system (PCCS), which plays a critical role in removing reactor heat during a steam release accident case. However, the presence of non-condensable gas (NCG), like air, reduces the heat transfer performance. This physics phenomenon becomes multifactorial for nuclear reactor containment during a fuel failure accident case that releases hydrogen gas. Besides, the mixture component of steam-air-hydrogen varies in reactor accident cases, which need simulation and validation keeping parameters of importance. Reviews showed that previous studies for SMR’s PCCCS did not cover the condensation heat transfer (CHT) in the presence of multicomponent NCG mixture parametric computational fluid dynamics (CFD) simulation and validation, making a research gap in the SMR design safety. A comprehensive CHT parametric CFD study was performed for SMR PCCS to fill this research gap. This study used experimental data as simulation 3D physics domain inlet and outlet boundary conditions. However, the wall boundary conditions were constant temperature, curve-fit, and annular coolant for verifying the turbulence models. Parametric simulations were performed, verified, and optimized for steam-NCGs mixtures. The multicomponent gases, multiphase mixtures, and fluid film condensation models were applied with associated turbulence models. The results of the parametric study were evaluated for realistic reactor conditions. Results showed that parametric study provided critical insight about the dependency of multicomponent gas mixture parameters that supports reactor safety design, analysis, and licensing.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1981

Some aspects of analytical chemistry as applied to water quality assurance techniques for reclaimed water: The potential use of X-ray fluorescence spectrometry for automated on-line fast real-time simultaneous multi-component analysis of inorganic pollutants in reclaimed water

The potential use of isotopically excited energy dispersive X-ray fluorescence (XRF) spectrometry for automated on line fast real time (5 to 15 minutes) simultaneous multicomponent (up to 20) trace (1 to 10 parts per billion) analysis of inorganic pollutants in reclaimed water was examined. Three anionic elements (chromium 6, arsenic and selenium) were studied. The inherent lack of sensitivity of XRF spectrometry for these elements mandates use of a preconcentration technique and various methods were examined, including: several direct and indirect evaporation methods; ion exchange membranes; selective and nonselective precipitation; and complexation processes. It is shown tha XRF spectrometry itself is well suited for automated on line quality assurance, and can provide a nondestructive (and thus sample storage and repeat analysis capabilities) and particularly convenient analytical method. Further, the use of an isotopically excited energy dispersive unit (50 mCi Cd-109 source) coupled with a suitable preconcentration process can provide sufficient sensitivity to achieve the current mandated minimum levels of detection without the need for high power X-ray generating tubes.

Ling, A. C.↗
DOE OSTI2026

Functionalized benzylamines from commercial kraft lignin

Benzylamines are key intermediates in pharmaceuticals, agrochemicals, and polymers, but their conventional production relies on benzyl chloride - a petroleum-derived compound with high toxicity and energy demands. Lignin, accounting for up to 30% of plant biomass, is the largest renewable source of aromatic carbon on Earth. However, its highly complex and recalcitrant structure poses a major barrier to efficient conversion into high-value chemicals. Here, in this study, we developed a catalytic approach to convert commercial kraft lignin into phenolic benzylamines through selective depolymerization and subsequent functionalization. We systematically evaluated the effects of three alcohol solvents, formic acid (FA), and a ruthenium-on‑carbon (Ru/C) catalyst on monophenol yield and selectivity. Up to 6.5 wt% monophenol yield was achieved using methanol (MeOH), FA, and Ru/C at 300 °C for 2 h. Quantum thermodynamic simulations based on the COSMO-RS model confirmed the superior solvation and reactivity of the MeOH + FA system, rationalizing observed product yield. The purified monophenolic products, primarily guaiacol and alkyl guaiacols, were then converted into functionalized benzylamines with >90% yield via a multicomponent Mannich reaction under mild conditions. Techno economic analysis (TEA) and life cycle assessment (LCA) underscore the importance of improving lignin depolymerization yields and expanding biorefinery scale. Solvent-only configurations outperform other options in both cost and emissions, with the methanol-only case performing the best ($\$$105 /kg and 26 kg CO 2e /kg) at a large-scale facility. This study establishes a scalable, bio-based pathway for producing benzylamines from commercial kraft lignin, advancing lignin valorization and offering a sustainable alternative to produce petrochemical-based benzylamines.

Catalytic reduction↗
DOE OSTI2023

First test of the consistency relation for the large-scale structure using the anisotropic three-point correlation function of BOSS DR12 galaxies

ABSTRACT We present, for the first time, an observational test of the consistency relation for the large-scale structure (LSS) of the Universe through a joint analysis of the anisotropic two- and three-point correlation functions (2PCF and 3PCF) of galaxies. We parameterize the breakdown of the LSS consistency relation in the squeezed limit by Es, which represents the ratio of the coefficients of the shift terms in the second-order density and velocity fluctuations. Es ≠ 1 is a sufficient condition under which the LSS consistency relation is violated. A novel aspect of this work is that we constrain Es by obtaining information about the non-linear velocity field from the quadrupole component of the 3PCF without taking the squeezed limit. Using the galaxy catalogues in the Baryon Oscillation Spectroscopic Survey (BOSS) Data Release 12, we obtain $E_{\rm s} = -0.92_{-3.26}^{+3.13}$, indicating that there is no violation of the LSS consistency relation in our analysis within the statistical errors. Our parameterization is general enough that our constraint can be applied to a wide range of theories, such as multicomponent fluids, modified gravity theories, and their associated galaxy bias effects. Our analysis opens a new observational window to test the fundamental physics using the anisotropic higher-order correlation functions of galaxy clustering.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1987

Analysis of Martian ionosphere and solar wind electron gas data from the planar retarding potential analyzer on the Viking spacecraft

Approximate expressions for the electron current collected by a planar retarding potential analyzer (RPA) mounted on a moving, conducting, charged spacecraft are derived. They are utilized for the analysis of electron current data obtained by the RPAs on the Viking spacecraft in the ionosphere of Mars and in the disturbed and undisturbed solar wind near this planet. It is shown that contamination currents by photoelectrons emitted from the spacecraft can be distinguished and removed from the signal. Parameters deduced from the analysis of RPA electron sampling data are the multicomponent electron temperatures, the number densities, and the spacecraft potential.

Mantas, G. P.↗
DOE OSTI2022

Multivariate analysis: An essential for studying complex glasses

Understanding the impact of individual compositional components on the devitrification of complex multicomponent glasses, for example, 10–50+ oxides, typically requires numerous studies to examine each component's impact. Here we apply exploratory data analysis (EDA) to a heterogeneous data set of silicate glasses to determine the cations’ individual and interacting effects on the crystallization of nepheline (nominally NaAlSiO 4 ). Our data consisted of 795 simulated high-level nuclear waste glasses composed of, on average, 50 oxide components. We determine the interactions in the heterogeneous data that cause deviations from the behavior found in simplified composition studies. Using both univariate and bivariate EDA techniques, we demonstrate the importance of including calculated structural glass parameters on nepheline's devitrification, including field strength, cation-to-anion radius ratio, and single-bond strength. Here, we also show that studies with simplified glass compositions may fall short in generating knowledge directly transferrable to complex glass compositions. The method used in this study has the potential to inform experimental design for simplified compositions (~6+ oxides) that can generate knowledge directly transferrable to complex, multivariable compositions. The observations reported here have broad implications for any study attempting to map the physical properties of a complex glass containing numerous cations.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Ablation, Thermal Response, and Chemistry Program for Analysis of Thermal Protection Systems

In previous work, the authors documented the Multicomponent Ablation Thermochemistry (MAT) and Fully Implicit Ablation and Thermal response (FIAT) programs. In this work, key features from MAT and FIAT were combined to create the new Fully Implicit Ablation, Thermal response, and Chemistry (FIATC) program. FIATC is fully compatible with FIAT (version 2.5) but has expanded capabilities to compute the multispecies surface chemistry and ablation rate as part of the surface energy balance. This new methodology eliminates B' tables, provides blown species fractions as a function of time, and enables calculations that would otherwise be impractical (e.g. 4+ dimensional tables) such as pyrolysis and ablation with kinetic rates or unequal diffusion coefficients. Equations and solution procedures are presented, then representative calculations of equilibrium and finite-rate ablation in flight and ground-test environments are discussed.

Milos, Frank S.↗
NASA NTRS2005

NASA Tech Briefs, June 2005

Topics covered include: Apparatus Characterizes Transient Voltages in Real Time; Measuring Humidity in Sealed Glass Encasements; Adaptable System for Vehicle Health and Usage Monitoring; Miniature Focusing Time-of-Flight Mass Spectrometer; Cryogenic High-Sensitivity Magnetometer; Wheel Electrometer System; Carbon-Nanotube Conductive Layers for Thin-Film Solar Cells; Patch Antenna Fed via Unequal-Crossed-Arm Aperture; LC Circuits for Diagnosing Embedded Piezoelectric Devices; Nanowire Thermoelectric Devices; Code for Analyzing and Designing Spacecraft Power System Radiators; Decision Support for Emergency Operations Centers; NASA Records Database; Real-Time Principal- Component Analysis; Fuzzy/Neural Software Estimates Costs of Rocket- Engine Tests; Multicomponent, Rare-Earth-Doped Thermal-Barrier Coatings; Reactive Additives for Phenylethynyl-Containing Resins; Improved Gear Shapes for Face Worm Gear Drives; Alternative Way of Shifting Mass to Move a Spherical Robot; Parylene C as a Sacrificial Material for Microfabrication; In Situ Electrochemical Deposition of Microscopic Wires; Improved Method of Manufacturing SiC Devices; Microwave Treatment of Prostate Cancer and Hyperplasia; Ferroelectric Devices Emit Charged Particles and Radiation; Dusty-Plasma Particle Accelerator; Frozen-Plug Technique for Liquid-Oxygen Plumbing; Shock Waves in a Bose-Einstein Condensate; Progress on a Multichannel, Dual-Mixer Stability Analyzer; Development of Carbon- Nanotube/Polymer Composites; Thermal Imaging of Earth for Accurate Pointing of Deep-Space Antennas; Modifications of a Composite-Material Combustion Chamber; Modeling and Diagnostic Software for Liquefying- Fuel Rockets; and Spacecraft Antenna Clusters for High EIRP.

Source record↗
DOE OSTI2026

Revisiting the Supernova Engines in the 3C 397 and W49B Supernova Remnants

The nature of the supernova remnants (SNRs) 3C 397 and W49B has long been a subject of debate, with prior studies offering conflicting interpretations between thermonuclear and core-collapse scenarios. To help settle this debate, we present a systematic, spatially resolved, spectroscopic analysis of both remnants using XMM-Newton. By applying multicomponent thermal models, we derive key physical properties including elemental abundances, ejecta temperatures, ambient densities, and explosion energetics. We compare the inferred metal abundance ratios to a wide range of core-collapse and thermonuclear nucleosynthesis models, including new models whose explosion energies differ from the canonical value of 10 51 erg. We find that the observed Fe/Si and Ca/Si ratios in both SNRs are best matched by certain thermonuclear models. However, no model fully reproduces the complete set of observed abundance patterns. In 3C 397, high Fe enrichment and spatial abundance variations suggest interaction with a dense progenitor environment, and W49B’s composition is overall consistent with a thermonuclear origin; however, both require a low-energy (∼10 50 erg) supernova explosion. We additionally map the Fe Kα line centroid energies and find a spread, with W49B falling within the core-collapse region—highlighting both environmental complexity and the limitations of this diagnostic for supernova classification. Our results highlight the need for caution in relying on any single diagnostic or nucleosynthesis model for supernova typing, underscore the need for improved nucleosynthesis models, and motivate future high-resolution, high-throughput observations.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1971

Stagnation region heating of a phenolic-nylon ablator during return from planetary missions

The results of a stagnation-line analysis of the radiative heating of a phenolic-nylon ablator are reported. The analysis includes flowfield coupling with the ablator surface, equilibrium chemistry, multicomponent or binary diffusion and a coupled line and continuum radiation calculations. Users manual and operating instructions for the computer programs listed in the report are included.

Esch, D. D.↗