Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mounting configurations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A Methodology for Measuring Blade Clearance on an Operating Utility-Scale Wind Turbine

This report describes the deployment of eleven laser sensors to measure the clearance between blades and tower in a 1.5-MW wind turbine whose rotor was mounted first in upwind and then in downwind configurations. The experimental recordings are compared to the numerical predictions generated by an aeroservoelastic model of the turbine. Good agreement is found between the two datasets, although discrepancies up to 30~cm are observed. The sources of this error are discussed. This methodology is found to be a valuable resource for the validation of the numerical predictions of the flapwise deflections of wind turbine blades. The accurate prediction of these deflections is increasingly important as wind turbines grow in size and become increasingly flexible.

17 WIND ENERGY↗
DOE OSTI2024

Sample mount for electron backscatter diffraction

A sample mount having a bottom surface, a front surface, and a second portion is disclosed. The first portion is perpendicular to the bottom surface. The second portion has an external surface and an internal surface and extends from the first portion to form a 70-degree angle relative to the bottom surface. The sample mount may also have a top surface, an opening extending through the second portion of the front surface, and a receiving area configured to receive a sample, wherein the top surface presents an unimpeded path between the sample and an SEM pole piece. The sample mount may include a spring-loaded handle configured to push the sample against the internal surface of the second portion of the front surface, wherein pushing the sample against the internal surface places the sample at the 70-degree angle relative to the bottom surface.

Wieliczka, David M.↗
DOE OSTI2021

Linear delta systems, hexapod systems, and related methods

A linear delta system includes a support frame, rails mounted to the support frame, linear actuators, each linear actuator configured to translate along a longitudinal length of a respective rail, pairs of parallel rods each coupled to the linear actuators, a platform coupled to a longitudinal end of each of the pairs of parallel rods opposite the respective linear actuator, and an object coupled to the platform. Longitudinal axes of the rails are oriented parallel to each other and lie within a common plane or an uncommon plane. A method of forming a linear delta system includes mounting rails to a support frame, the rails having longitudinal axes that are parallel to each other and lying within a common plane, coupling a linear actuator to each of the rails, coupling a pair of parallel rods to each linear actuator, and coupling a platform to the pairs of parallel rods.

Crawford, Anthony L.↗
DOE OSTI2022

Controlling a power output of a nuclear reaction without control rods

A nuclear power system includes a reactor vessel that includes a reactor core mounted therein. The reactor core includes nuclear fuel assemblies configured to generate a nuclear fission reaction. The reaction vessel does not include any control rod assemblies therein. The nuclear power system further includes a riser positioned above the reactor core, a primary coolant flow path, a primary coolant that circulates through the primary coolant flow path to receive heat from the nuclear fission reaction and release the received heat to generate electric power in a power generation, and a control system communicably coupled to the power generation system and configured to control a power output of the nuclear fission reaction independent of any control rod assemblies.

Callaway, Allyson↗
DOE OSTI2023

Systems and methods for maintaining structures

A motorized apparatus includes a body assembly and a maintenance device mounted to the body assembly. The maintenance device is configured to perform a service operation on a surface. The maintenance device extends from the body assembly at an angle. The motorized apparatus also includes a plurality of leg assemblies coupled to the body assembly and configured to support the body assembly and the maintenance device at a distance from the surface. The motorized apparatus further includes at least one actuator assembly coupled to the plurality of leg assemblies and configured to independently actuate each leg assembly of the plurality of leg assemblies. The at least one actuator assembly is configured to receive instructions related to a position of the maintenance device and actuate the plurality of leg assemblies to adjust an orientation of the body assembly and the maintenance device relative to the surface.

Duncan, Alexander Kyle↗
DOE OSTI2022

Solar Photovoltaics: Supply Chain Deep Dive Assessment

This is one of a series of reports and deep dive assessments produced in response to Executive Order 14017 “America’s Supply Chains,” which directs the Secretary of Energy to submit a report on supply chains for the energy sector industrial base. The Executive Order is helping the federal government to build more secure and diverse U.S. supply chains, including energy supply chains. Over the past decade, solar power has gone from an emerging, niche technology to a mature energy industry. By 2035, solar power could supply 40% or more of U.S. electricity demand, dramatically accelerating the decarbonization of buildings, transportation, and industry; and, if current technology trends continue, it could do so without increasing the price of electricity. The rapid expansion of solar energy has the potential to yield broad benefits in the form of economic activity and workforce development. The solar industry already employs roughly 230,000 people in the United States, at an average wage that is higher than the national average for most comparable positions. By decarbonizing the electricity sector by 2035, the U.S. solar industry could employ 500,000–1,500,000 people by 2030. The components that are assembled to install a photovoltaic power system are produced by a global supply chain. Photovoltaic (PV) modules (also called panels) are made of cells that use a variety of technologies. There are two leading types of solar modules used in the United States, with crystalline silicon (c-Si) modules representing 84% of the market and cadmium telluride (CdTe) modules representing 16% of the market. Modules of either type require mounting structures to provide mechanical support (racking), which may be configured to follow the sun (tracking). The output of any PV module is direct current (dc), which is almost always converted to alternating current (ac) by an inverter.

14 SOLAR ENERGY↗
DOE OSTI2021

Door assembly with collapsible carrier and water shield

A door assembly for a motor vehicle comprised of an outer door panel and an inner door panel interconnected to define a door panel structure having an internal door cavity. A collapsible carrier module is configured to be oriented in a collapsed arrangement to facilitate installation into the door cavity through an opening in the inner door panel. The collapsible carrier module can be moved from its collapsed arrangement into an expanded arrangement upon installation within the door cavity to facilitate subsequent mounting to the door panel structure. The collapsible carrier module includes a barrier configured to close off the opening in the inner panel.

Fortin, Raymond Edward↗
DOE OSTI2021

Housing apparatus for sensitive gas sensor

A sensor housing apparatus includes a housing having an enclosure and outer assembly, at least one flow path extending through the housing, a gas sensor disposed in the enclosure and a thermal mass. The thermal mass is mounted within the enclosure in thermal communication with the gas sensor, and is configured to transfer thermal energy from the gas sensor to an ambient environment surrounding the housing and minimize temperature gradients adjacent the gas sensor.

Martin, Yves C.↗
DOE OSTI2024

Simultaneous measurement of temperature and strain by cascaded fiber Bragg grating-silicon Fabry-Perot interferometer sensor

We report a fiber-optic sensor configuration with a cascaded fiber Bragg grating (FBG) and a silicon Fabry-Perot interferometer (FPI) for simultaneous measurement of temperature and strain. The sensor is composed of a 5 mm FBG on a single mode fiber and a 100μm thick silicon FPI attached to the tip of the optical fiber. The FBG is surface mounted on the host structure, and the FPI tip is suspended. Due to the stress-free, cantilever configuration, the silicon FPI is insensitive to strain, but sensitive to temperature with a sensitivity much higher than the FBG due to the large thermo-optic coefficient of silicon. The sensor is tested from room temperature to 100°C with varying strain up to ∼150με. The silicon FPI provides high temperature sensitivity of 89 pm/°C unaffected by strain. Since the FBG is attached to the host structure, it is affected by both thermal and mechanical strain; the sensitivity of these was experimentally obtained 32 pm/°C and 1.09 pm / με, respectively. Interrogated with a broadband light source and a high-speed spectrometer, the sensor shows temperature and strain resolutions of 1.9 × 10 −3 °C and 0.042 με, respectively. Here, due to the small size, enhanced sensitivity, and high resolution, this cascaded FBG-FPI sensor can be used in applications where accurate measurement of temperature and strain is required.

42 ENGINEERING↗
DOE OSTI2022

Impacts of wind field characteristics and non-steady deterministic wind events on time-varying main-bearing loads

Abstract. This work considers the characteristics and drivers of the loads experienced by wind turbine main bearings. Simplified load response models of two different hub and main-bearing configurations are presented, representative of both inverting direct-drive and four-point-mounted geared drivetrains. The influences of deterministic wind field characteristics, such as wind speed, shear, yaw offset, and veer, on the bearing load patterns are then investigated for similarity scaled 5, 7.5, and 10 MW reference wind turbine models. Main-bearing load response in cases of deterministic gusts and extreme changes in wind direction are also considered for the 5 MW model. Perhaps surprisingly, veer is identified as an important driver of main-bearing load fluctuations. Upscaling results indicate that similar behaviour holds as turbines become larger, but with mean loads and load fluctuation levels increasing at least cubically with the turbine rotor radius. Strong links between turbine control and main-bearing load response are also observed.

17 WIND ENERGY↗
DOE OSTI2023

Ducted fuel injection system alignment device

An alignment device for a ducted fuel injection system comprising a mounting block removably attachable to a duct of the ducted fuel injection system. The mounting block can include a passageway extending therethrough. The passageway can align with the duct when the mounting block is attached to the duct. The alignment device further comprises an imaging device configured to capture an image viewing through the duct toward an outlet of a fuel injector. A portion of the imaging device can extend in the passageway. The alignment device additionally comprises a centering structure configured to align a portion of the imaging device with a central axis of the duct. The image captured by the imaging device can be configured for use aligning a position of an outlet of a fuel injector with respect to a position of the duct.

Nilsen, Christopher William↗
DOE OSTI2023

Cryomodule Compressed Air Panels

RF couplers require compressed air to maintain operational temperature and performance. Each type of cryomodule has a different configuration dependent on the number of RF cavities and their specifications. Compressed air panels will be mounted on the lifting brackets of the cryomodules to provide support for the hardware.

Herbst, Lilly↗
DOE OSTI2026

A Fast, Accurate Prediction for System-Wide Damage Due to Dynamic Wind Loading

The complex relationship between photovoltaic (PV) hardware configurations, overall system dynamics, and turbulent aerodynamic phenomena generates highly unsteady, non-uniform loads that can lead to damaging instabilities. These effects may result in glass breakage, cell cracking, and structural failures in frames and mounting systems, even under moderate wind conditions. Addressing industry concerns about premature system failures in field conditions deemed survivable, our research aims to develop a fast and accurate predictive model for system damage. This model integrates configurable hardware choices with advanced simulation tools to represent the overall system-specific dynamics effectively. Using this model, we predict responses under varying weather conditions and hardware setups, translating these predictions into pre-trained surrogate models capable of accurately identifying failure risks and rapidly testing new system hardening measures. In this presentation, we will showcase preliminary results in capturing system dynamics through our customizable library of PV hardware configurations. Additionally, we will highlight how these new tools build upon PVade's established wind load modeling capabilities and foster the development of advanced AI/ML surrogates for improving system robustness.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Dual linear delta assemblies, linear delta systems, and related methods

A dual linear delta assembly includes a frame, a first linear delta system, and a second linear delta system concentric with the first linear delta system. Each of the first linear delta system and the second linear delta system may include rails mounted to the frame, linear actuators, each linear actuator coupled to a respective rail of the rails and configured to translate along a longitudinal length of the respective rail, pairs of parallel rods each operably coupled to a respective linear actuator of the linear actuators, and a platform coupled to a longitudinal end of each of the pairs of parallel rods opposite the respective linear actuator of the linear actuators.

Crawford, Anthony L.↗
DOE OSTI2022

Boron injection system for controlling a nuclear reaction by delivering boron into a containment vessel

A nuclear power system includes a reactor vessel that includes a reactor core mounted within a volume of the reactor vessel. The reactor core includes one or more nuclear fuel assemblies configured to generate a nuclear fission reaction. The nuclear power system further includes a containment vessel sized to enclose the reactor vessel such that an open volume is defined between the containment vessel and the reactor vessel. A boron injection system is positioned in the open volume of the containment vessel and includes an amount of boron sufficient to stop the nuclear fission reaction or maintain the nuclear fission reaction at a sub-critical state. The boron injection system is positioned to deliver the amount of boron into the open volume.

Linik, Larry↗
DOE OSTI2020

Capital Costs for Dual-Use Photovoltaic Installations: 2020 Benchmark for Ground-Mounted PV Systems with Pollinator-Friendly Vegetation, Grazing, and Crops

This report analyzes the installed system cost of various multi-land use PV system configurations. We used PV system bottom-up cost model accounting for all system and project-development costs incurred during the installation to model the costs for conventional PV systems, PV systems co-located with sheep grazing, PV systems co-located with pollinator friendly fields and PV systems co-located with crops. We also conducted extensive sensitivity analysis around different PV system design parameters given the nascent stage of this industry.

14 SOLAR ENERGY↗
DOE OSTI2021

Nanosecond Gated CMOS Camera (NSGCC) ICD (Rev. 2.1)

The Ultra-Fast X-ray Imager (UXI) program is an ongoing effort at Sandia National Laboratories to create high speed, multi-frame, time-gated Read Out Integrated Circuits (ROICs), and a corresponding suite of photodetectors to image a wide variety of High Energy Density (HED) physics experiments on both Sandia’s Z-Machine and LLNL’s National Ignition Facility (NIF). Several cameras have been designed over the length of the program; one of the most recent is the Icarus, which is an improvement on past imagers (Furi and Hippogriff). A second sensor that can be connected is the Daedalus sensor. The Icarus is a 1024 × 512-pixel array with either 25 μm or 8 µm spatial resolution containing four frames of storage per pixel and has improved timing generation and distribution components while achieved 2 ns time gating. The Daedalus sensor is also a 1024 x 512-pixel array with 25 µm special resolution containing three frames of storage per pixel and has an increased set of features for a wider variety of applications from interlacing of rows in each frame to configurability of all shutters. See Section 14 for details regarding the Icarus implementation of the firmware and Section 15 for details regarding the Daedalus implementation. Due to the unique test environments UXI sensors are targeted for, full custom hardware was required to physically mount an Icarus or Daedalus sensor, manage its various functions, and read out pixel data for transfer to a host computer. Beyond experimental functionality, the hardware also needed to accommodate sensor characterization requirements. Lawrence Livermore National Laboratory’s ‘Version 4.0 Board’ was the result of these efforts. It mounts all the components required to fully utilize the Icarus and Daedalus sensors including analog to digital converters to convert pixel data and various system voltages to digital form for readout and analysis, DAC channels for remote configuration of critical bias voltages, static random-access memories to buffer pixel data, RS422 and Gigabit Ethernet communications for remote access, and an FPGA to tie these components together. This document describes the FPGA electrical interfaces in detail to allow the reader a greater understanding of the device, and to facilitate implementation of custom software to control and manage it. The Version 4.0 Board is a continuation of the Nano-second Gated CMOS hardware design that retains much of the functionality of the Version 1.0 Board while adding features including a DAC instead of digital potentiometers, as well as sensors for pressure and radiation. The Version 4.0 board is intended for applications requiring tight form-factor enclosures. It is composed of two stacking boards; one holds the FPGA and regulators to power the various components of the board while the other contains the mating connector to the sensor, image-readoff ADCs, the DAC, and other components.

42 ENGINEERING↗
DOE OSTI2020

Impact to Cooling Airflow from Truck Platooning: Preprint

We investigate tradeoffs between the airflow strategies related to engine cooling and the aerodynamic-enabled fuel savings created by platooning. By analyzing air temperatures, engine temperatures and cooling air flow at different platoon distances, we show the thermal impact to the engine from truck platooning. Previously, we collected wind and thermal data for numerous heavy-duty truck platoon configurations (gaps ranging from 4 to 87 meters) and reported the significant fuel savings enabled by these configurations. The fuel consumption for all trucks in the platoon were measured using the SAE J1321 gravimetric procedure as well as calibrated J1939 instantaneous fuel rate while travelling at 65 mph and loaded to a gross weight of 65,000 lb. Using thermocouples mounted 1 m ahead of each truck, anemometers at the grill and a grid of under-hood thermocouples as well as J1939 reported engine temperatures, we analyze the impact to critical operating temperatures from different platoon configurations. Results show significant changes in the engine and under-hood air temperatures that correlate with vehicle gap distance and platoon position.

47 OTHER INSTRUMENTATION↗