Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecular devices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Recent advancements in chiral spintronics: from molecular-level insights to device applications. A prospect based on the interplay between physical and chemical properties of chiral systems

This review discusses recent advancements in chiral-based spin-electronic devices achieved using suitable combinations of organic, inorganic and hybrid materials. The focus is on how chirality can be effectively used to control spin in practical applications, particularly in spintronic sensors and consumer devices. Interestingly, the underlying mechanism for this control is the chiral-induced spin selectivity (CISS) effect, which links the structural chirality of a material to its spin-selective electronic transport properties. The CISS effect arises from the observation that charge transmission in chiral systems is spin selective. Experimental evidence suggests a relationship between electron spin and the structural handedness of the material. In conclusion, this unique structure-transport relationship can be exploited to design a wide range of spintronics devices, including memory, transistors, logic gates and molecular q-bits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nonvolatile Voltage Controlled Molecular Spin-State Switching for Memory Applications

Nonvolatile, molecular multiferroic devices have now been demonstrated, but it is worth giving some consideration to the issue of whether such devices could be a competitive alternative for solid-state nonvolatile memory. For the Fe (II) spin crossover complex [Fe{H2B(pz)2}2(bipy)], where pz = tris(pyrazol-1-yl)-borohydride and bipy = 2,2′-bipyridine, voltage-controlled isothermal changes in the electronic structure and spin state have been demonstrated and are accompanied by changes in conductance. Higher conductance is seen with [Fe{H2B(pz)2}2(bipy)] in the high spin state, while lower conductance occurs for the low spin state. Plausibly, there is the potential here for low-cost molecular solid-state memory because the essential molecular thin films are easily fabricated. However, successful device fabrication does not mean a device that has a practical value. Here, we discuss the progress and challenges yet facing the fabrication of molecular multiferroic devices, which could be considered competitive to silicon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2005

Electronic Transport through Self Assembled Thiol Molecules: Effect of Monolayer Order, Dynamics and Temperature

We present the charge transport and tunneling conductance of self assembled organic thiol molecules and discuss the influence of order and dynamics in the monolayer on the transport behavior and the effect of temperature. Conjugated thiol molecular wires and organometals such as terpyridine metal complexes provide a new platform for molecular electronic devices and we study their self assembly on Au(111) substrates by the scanning tunneling microscope. Determining the organization of the molecule and the ability to control the nature of its interface with the substrate is important for reliable performance of the molecular electronic devices. By concurrent scanning tunneling microscopy and spectroscopy studies on SAMs formed from oligo (phenelyne ethynelyne) monolayers with and without molecular order, we show that packing and order determine the response of a self assembled monolayer (SAM) to competing interactions. Molecular resolution STM imaging in vacuum shows that the OPES adopt an imcommensurate SAM structure on Au(111) with a rectangular unit cell. Tunneling spectroscopic measurements were performed on the SAM as a function of junction resistance. STS results show that the I-Vs are non linear and asymmetric due to the inherent asymmetry in the molecular structure, with larger currents at negative sample biases. The asymmetry increases with increasing junction resistance due to the asymmetry in the coupling to the leads. This is brought out clearly in the differential conductance, which also shows a gap at the Fermi level. We also studied the effect of order and dynamics in the monolayer on the charge transport and found that competing forces between the electric field, intermolecular interactions, tip-molecule physisorption and substrate-molecule chemisorption impact the transport measurements and its reliability and that the presence of molecular order is very important for reproducible transport measurements. Thus while developing new electronic platforms based on molecules, it is important to have a good control of the molecule-substrate interface, for the devices to perform reliably. While such a control would minimize fluctuations and dynamics in the ensemble, the real challenge is to develop device architectures that are tolerant to fluctuations, since they cannot be totally eliminated in these low dimensional soft systems. Results of temperature dependent STS measurements will also be discussed.

Dholakia, Geetha↗
DOE OSTI2024

Correlating structure, self-assembly chemistry and conductivity of trithiocyanuric acid on Au(111)

The majority of candidates for simple model molecular-electronic components consist of a conductive π-conjugated hydrocarbon linker attached to at least two anchoring groups, such as thiols or isocyanides. It has been found that select molecules self-assemble on gold surfaces, creating one-dimensional conductive structures that act as “molecular wires”. Furthermore, these oligomers can form molecular bridges between gold nanoparticles, leading to the creation of simple molecular-electronic devices. This raises the question whether other π-conjugated molecular linkers could exhibit similar behavior that might offer a broader range of candidates for fabricating electronic devices. Trithiocyanuric acid (1,3,5-triazine-2,4,6-trithiol, TTCA) provides a possible candidate. TTCA (C3N3(SH)3) can exist as a trithiol or as a trithione in which hydrogens transfer to the sulfurs so that they are present with three C=N groups within the ring. TTCA exists naturally in the trithione form but converts into a trithiol when adsorbed onto an Ag(111) where it is vertically oriented. The structure of TTCA adsorbed on Au(111) is studied here using reflection-absorption infrared spectroscopy (RAIRS) where it is found to remain as the trithione isomer, but changes orientation as the coverage increases. Scanning-tunneling microscopy (STM) reveals that TTCA oligomerizes on Au(111) to form chains and triangular structures. The influence on molecular conductivity due to the differences in the adsorbate's isomeric structure was investigated using devices comprising either silver or gold nanoparticles deposited in the gap between gold nanoelectrodes. Both devices were found to conduct when dosed with TTCA, but the devices fabricated using silver were about 13 time more conductive than those made from gold nanoparticles, consistent with the π-conjugated structure formed on silver but not on gold. This implies that oligomers form both on silver and on gold and potentially increases the range of molecule-metal combinations that might be used to fabricate molecular-electronic devices.

Molecular electronics↗
DOE OSTI2025

Electrochemically Mediated Au–C(sp 2 ) Anchors for Molecular Electronics

Terminal anchor groups play a key role in the stability and electronic properties of molecular junctions. Single molecule junctions typically consist of two preinstalled terminal anchors linking organic molecules to metal electrodes. Here, in this work, we show that p -terphenyl derivatives containing only a single terminal anchor show conductance features similar to junctions with two preinstalled terminal anchors. A set of p -terphenyl derivatives with one terminal anchor was prepared using automated chemical synthesis and characterized using single molecule electronics experiments, molecular dynamics (MD) simulations, bulk electrochemistry and spectroscopy, and nonequilibrium Green’s function-density functional theory (NEGF-DFT) calculations. Our results show that 4-amino- p -terphenyl (PPP) and related analogs exhibit a well-defined high conductance state that is diminished or absent in other p-terphenyl derivatives lacking a preinstalled amine terminal anchor or fluorine or methyl substitutions at the terminal para position. However, a low conductance state is observed in all amino- p -terphenyl derivatives with one preinstalled anchor due to molecular junctions formed by noncovalent dimeric π–π stacking interactions. The observed high conductance state diminishes upon the addition of reducing agents and is restored upon the addition of an oxidizing agent. Our results suggest that the high conductance state arises due to Au–C(sp 2 ) bond formation facilitated by a single electron oxidation event at the electrode surface. A series of control experiments with different anchor groups shows that primary amines play a key role in forming Au–C bonds for molecular junctions. Overall, these results suggest that Au–C bond formation gives rise to high conductance pathways in organic molecules containing only one preinstalled terminal anchor. Insights from this work can be leveraged in the design of molecular electronic devices, particularly in understanding the mechanisms of molecular binding and junction formation.

charge transport↗
NASA NTRS2003

Block QCA Fault-Tolerant Logic Gates

Suitably patterned arrays (blocks) of quantum-dot cellular automata (QCA) have been proposed as fault-tolerant universal logic gates. These block QCA gates could be used to realize the potential of QCA for further miniaturization, reduction of power consumption, increase in switching speed, and increased degree of integration of very-large-scale integrated (VLSI) electronic circuits. The limitations of conventional VLSI circuitry, the basic principle of operation of QCA, and the potential advantages of QCA-based VLSI circuitry were described in several NASA Tech Briefs articles, namely Implementing Permutation Matrices by Use of Quantum Dots (NPO-20801), Vol. 25, No. 10 (October 2001), page 42; Compact Interconnection Networks Based on Quantum Dots (NPO-20855) Vol. 27, No. 1 (January 2003), page 32; Bit-Serial Adder Based on Quantum Dots (NPO-20869), Vol. 27, No. 1 (January 2003), page 35; and Hybrid VLSI/QCA Architecture for Computing FFTs (NPO-20923), which follows this article. To recapitulate the principle of operation (greatly oversimplified because of the limitation on space available for this article): A quantum-dot cellular automata contains four quantum dots positioned at or between the corners of a square cell. The cell contains two extra mobile electrons that can tunnel (in the quantummechanical sense) between neighboring dots within the cell. The Coulomb repulsion between the two electrons tends to make them occupy antipodal dots in the cell. For an isolated cell, there are two energetically equivalent arrangements (denoted polarization states) of the extra electrons. The cell polarization is used to encode binary information. Because the polarization of a nonisolated cell depends on Coulomb-repulsion interactions with neighboring cells, universal logic gates and binary wires could be constructed, in principle, by arraying QCA of suitable design in suitable patterns. Heretofore, researchers have recognized two major obstacles to realization of QCA-based logic gates: One is the need for (and the difficulty of attaining) operation of QCA circuitry at room temperature or, for that matter, at any temperature above a few Kelvins. It has been theorized that room-temperature operation could be made possible by constructing QCA as molecular-scale devices. However, in approaching the lower limit of miniaturization at the molecular level, it becomes increasingly imperative to overcome the second major obstacle, which is the need for (and the difficulty of attaining) high precision in the alignments of adjacent QCA in order to ensure the correct interactions among the quantum dots.

Firjany, Amir↗
DOE OSTI2024

Photovoltaic effect on silicon–alumina–ferromagnet tunnel junction providing insights about spin-dependent molecular spintronics solar cells

The study focuses on the observation of the photovoltaic (PV) effect on Si/AlOx/FM semiconductor–insulator–ferromagnetic metal (SIFM) structure. Utilization of ~10 nm NiFe film as the top ferromagnet (FM) layer was permeable for sufficient light radiation necessary for reaching the silicon substrate for the generation of electron–hole pairs upon photoexcitation. The effect of light intensity and magnetic field was studied on the SIFM’s PV response. We also investigated the role of silicon doping and the AlOx tunnel barrier between Si and FM in exploring suitable band bending necessary for separating the electron–hole pairs. Increasing the dopant density in Si and a damaged AlOx tunnel barrier quenched the PV effect. Ferromagnet/Insulator/Ferromagnet (FMIFM) was also studied to gain deeper mechanistic insights into the spin-dependent photovoltaic effect observed on FM/AlOx/FM tunnel junction-based molecular spintronics devices. Bridging of magnetic molecules between the Si and FM electrodes of SIFM increased the overall device current by establishing additional parallel conduction channels along with the AlOx tunnel barrier. However, SIFM with molecular conduction channels did not produce a PV effect. This study reported the PV effect on well-designed SIFM and opened possibilities for exploring new systems. More importantly, this paper provided insights into the role of molecule-induced exchange coupling in transforming an ordinary, cheap, and widely available ferromagnet into a semiconductor-like material capable of showing PV.

14 SOLAR ENERGY↗
NASA NTRS1998

Carbon Nanotube Based Molecular Electronics and Motors: A View from Classical and Quantum Dynamics Simulations

The tubular forms of fullerenes popularly known as carbon nanotubes are experimentally produced as single-, multiwall, and rope configurations. The nanotubes and nanoropes have shown to exhibit unusual mechanical and electronic properties. The single wall nanotubes exhibit both semiconducting and metallic behavior. In short undefected lengths they are the known strongest fibers which are unbreakable even when bent in half. Grown in ropes their tensile strength is approximately 100 times greater than steel at only one sixth the weight. Employing large scale classical and quantum molecular dynamics simulations we will explore the use of carbon nanotubes and carbon nanotube junctions in 2-, 3-, and 4-point molecular electronic device components, dynamic strength characterization for compressive, bending and torsional strains, and chemical functionalization for possible use in a nanoscale molecular motor. The above is an unclassified material produced for non-competitive basic research in the nanotechnology area.

Srivastava, Deepak↗
NASA NTRS1991

Molecular implementation of molecular shift register memories

An electronic shift register memory (20) at the molecular level is described. The memory elements are based on a chain of electron transfer molecules (22) and the information is shifted by photoinduced (26) electron transfer reactions. Thus, multi-step sequences of charge transfer reactions are used to move charge with high efficiency down a molecular chain. The device integrates compositions of the invention onto a VLSI substrate (36), providing an example of a molecular electronic device which may be fabricated. Three energy level schemes, molecular implementation of these schemes, optical excitation strategies, charge amplification strategies, and error correction strategies are described.

Beratan, David N.↗
DOE OSTI2023

Leakage Reduces Device Coherence Demands for Pulse-Level Molecular Simulations

Quantum simulation on noisy intermediate-scale quantum devices is severely limited by short qubit coherence times. A variational pulse-shaping algorithm known as ctrl-VQE was recently proposed to address this issue by eliminating the need for parameterized quantum circuits, which lead to long state preparation times. Here, in this study, we find the fastest possible pulses that prepare target molecular wave functions for a given device Hamiltonian describing coupled transmon qubits using simulations. We find that the resulting time-optimal pulses develop a bang-bang form consistent with Pontryagin’s maximum principle. We further investigate how the minimal state preparation time is impacted by the number of energy levels active in the transmon simulations. We find that leakage outside the computational subspace (something that is usually considered problematic) speeds up the state preparation, further reducing device coherence-time demands. Our analysis reveals that this speedup is due to both an enlarged solution space of target wave functions and the appearance of additional channels connecting initial and target states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Shape-persistent ladder molecules exhibit nanogap-independent conductance in single-molecule junctions

Molecular electronic devices require precise control over the flow of current in single molecules. However, the electron transport properties of single molecules critically depend on dynamic molecular conformations in nanoscale junctions. Here, in this work, we report a unique strategy for controlling molecular conductance using shape-persistent molecules. Chemically diverse, charged ladder molecules, synthesized via a one-pot multicomponent ladderization strategy, show a molecular conductance (d[log( G/G 0 )]/d x ≈ -0.1 nm -1 ) that is nearly independent of junction displacement, in stark contrast to the nanogap-dependent conductance (d[log( G/G 0 )]/d x ≈ -7 nm -1 ) observed for non-ladder analogues. Ladder molecules show an unusually narrow distribution of molecular conductance during dynamic junction displacement, which is attributed to the shape-persistent backbone and restricted rotation of terminal anchor groups. These principles are further extended to a butterfly-like molecule, thereby demonstrating the strategy's generality for achieving gap-independent conductance. Overall, our work provides important avenues for controlling molecular conductance using shape-persistent molecules. Achieving robust and controllable conductance in single-molecule junctions is challenging due to the dynamic nature of molecular conformations that fluctuate over operational timescales. A strategy using shape-persistent molecules has now been developed that demonstrates nearly junction-displacement-independent conductance, providing a stable solution for single-molecule electronic properties.

molecular electronics↗
NASA NTRS2003

Topography and transport properties of oligo(phenylene ethynylene) molecular wires studied by scanning tunneling microscopy

Conjugated phenylene(ethynylene) molecular wires are of interest as potential candidates for molecular electronic devices. Scanning tunneling microscopic study of the topography and current-voltage (I-V) characteristics of self-assembled monolayers of two types of molecular wires are presented here. The study shows that the topography and I-Vs, for small scan voltages, of the two wires are quite similar and that the electronic and structural changes introduced by the substitution of an electronegative N atom in the central phenyl ring of these wires does not significantly alter the self-assembly or the transport properties.

Polymers/chemistry↗
NASA NTRS1995

The Wide Field/Planetary Camera 2 (WFPC-2) molecular adsorber

A device has been developed at the Jet Propulsion Laboratory, California Institute of Technology, for the adsorption of contaminants inside a space instrument during flight. The molecular adsorber was developed for use on the Wide Field Planetary Camera 2, and it has been shown to perform at its design specifications in the WFPC-2. The basic principle of the molecular adsorber is a zeolite-coated ceramic honeycomb. The arrangement is efficient for adsorption and also provides the needed rigidity to retain the special zeolite coating during the launch vibrational environment. The adsorber, on other forms, is expected to be useful for all flight instruments sensitive to internal sources of contamination. Typically, some internal contamination is unavoidable. A common design solution is to increase the venting to the exterior. However, for truly sensitive instruments, the external contamination environment is more severe. The molecular adsorber acts as a one-way vent to solve this problem. Continued development is planned for this device.

Barengoltz, Jack↗
DOE OSTI2020

Spatially Offset Femtosecond Stimulated Raman Spectroscopy: Observing Exciton Transport through a Vibrational Lens

To design better molecular electronic devices, we need a strong understanding of how charges or excitons propagate, as many efficiency losses arise during transport. Exciton transport has been difficult to study because excitons tend to be short-lived, have short diffusion lengths, and can easily recombine. Here, we debut spatially offset femtosecond stimulated Raman spectroscopy (SO-FSRS), a three-pulse ultrafast microscopy technique. By offsetting the photoexcitation beam, we can monitor Raman spectral changes as a function of both time and position. We used SO-FSRS on 6,13-bis(triisopropylsilylethynyl) pentacene, a well-studied organic semiconductor used in photovoltaics and field-effect transistors. Furthermore, we demonstrated that the fast exciton and free charge carrier transport axes are identical and observed that exciton transport is less anisotropic by a factor of ~3. SO-FSRS is the first technique that directly tracks molecular structural evolution during exciton transport, which can provide roadmaps for tailor-making molecules for specific electronic devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Device and methods for determination of molecular weight distributions of polymers and distributions of other polymer properties without physical separation

Devices and methods for determining the cumulative distribution of a polymer property in a reactor without physical separation of reaction subcomponents. The device includes a means of measuring an instantaneous property of the polymers being produced in a reaction vessel a plurality of times during a polymerization reaction as well as a means of determining the corresponding change in polymer concentration in the reaction vessel between measurements of the instantaneous polymer property The device also includes a means of computing a statistical distribution appropriate to the polymer characteristic and applying the statistical distribution to a recently measured instantaneous value of the polymer property so as to have an instantaneous distribution of the polymer property and a means of adding together the instantaneous distributions of the polymer property in order to obtain the cumulative distribution of the polymer property in the reactor.

Reed, Wayne Frederick↗
DOE OSTI2024

Device and methods for determination of molecular weight distributions of polymers and distributions of other polymer properties without physical separation

Devices and methods for determining the cumulative distribution of a polymer property in a reactor without physical separation of reaction subcomponents. The device includes a means of measuring an instantaneous property of the polymers being produced in a reaction vessel a plurality of times during a polymerization reaction as well as a means of determining the corresponding change in polymer concentration in the reaction vessel between measurements of the instantaneous polymer property. The device also includes a means of computing a statistical distribution appropriate to the polymer characteristic and applying the statistical distribution to a recently measured instantaneous value of the polymer property so as to have an instantaneous distribution of the polymer property and a means of adding together the instantaneous distributions of the polymer property in order to obtain the cumulative distribution of the polymer property in the reactor.

Reed, Wayne Frederick↗
NASA NTRS1998

Carbon Nanotube Based Molecular Electronics

Carbon nanotubes and the nanotube heterojunctions have recently emerged as excellent candidates for nanoscale molecular electronic device components. Experimental measurements on the conductivity, rectifying behavior and conductivity-chirality correlation have also been made. While quasi-one dimensional simple heterojunctions between nanotubes with different electronic behavior can be generated by introduction of a pair of heptagon-pentagon defects in an otherwise all hexagon graphene sheet. Other complex 3- and 4-point junctions may require other mechanisms. Structural stability as well as local electronic density of states of various nanotube junctions are investigated using a generalized tight-binding molecular dynamics (GDBMD) scheme that incorporates non-orthogonality of the orbitals. The junctions investigated include straight and small angle heterojunctions of various chiralities and diameters; as well as more complex 'T' and 'Y' junctions which do not always obey the usual pentagon-heptagon pair rule. The study of local density of states (LDOS) reveal many interesting features, most prominent among them being the defect-induced states in the gap. The proposed three and four pointjunctions are one of the smallest possible tunnel junctions made entirely of carbon atoms. Furthermore the electronic behavior of the nanotube based device components can be taylored by doping with group III-V elements such as B and N, and BN nanotubes as a wide band gap semiconductor has also been realized in experiments. Structural properties of heteroatomic nanotubes comprising C, B and N will be discussed.

Srivastava, Deepak↗