Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modified separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Intermittent Electron-only Reconnection at Lunar Mini-magnetospheres

Abstract Lunar crustal magnetic anomalies (LCMA) are sub-ion-gyroradius structures that have been shown to stand off the solar wind (SW) plasma from the Moon’s surface, forming shock-like discontinuities and reflecting incident SW protons. In this Letter, the results of high-resolution, 2D fully kinetic simulations show a bursty electron-only magnetic reconnection in the SW-LCMA interaction region, characterized by the quasiperiodic formation and ejection of magnetic islands and strong parallel electron flows along the X-point separator lines. The islands are observed to modify the magnetic pressure pileup and Hall electric field above the LCMA, leading to sharp increases in reflected protons that drive electromagnetic fluctuations downstream and short distances upstream in the SW.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Separation of thorium, uranium, and rare earths from a strip solution generated from coarse coal refuse

This work systematically evaluated the separation performance of thorium, uranium, and rare earths when coal and coal byproduct were utilized as a non-traditional feedstock for rare earth production. A synthetic solution was prepared following the elemental composition of a strip solution generated from coarse coal refuse and used throughout the study. Various separation techniques including selective precipitation, solvent extraction, and a modified experimental protocol incorporating the two were applied to extract rare earths while minimizing the non-selective recovery of thorium and uranium into the product stream. Test results indicate that selective precipitation was effective for the removal of thorium at a pH value approaching 5 while solvent extraction preferentially removed uranium from rare earths. Therefore, a modified experimental protocol consisting of both selective precipitation and solvent extraction was subsequently developed and implemented. The findings following the modified experimental protocol indicate that extractant concentration, solvent extraction feed pH, and organic to aqueous (O/A) ratio all played a significant role in the removal of uranium. Among all the tests conducted, the best separation performance was achieved using a one-stage precipitation at a pH value of 4.8, 50 v% TBP, solvent extraction feed pH of 3.5, and an O/A ratio of 3, which corresponded to an overall rare earth, thorium, and uranium recovery of 79.6%, 0%, and 3.1%, respectively.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Homogeneous CuGaSe 2 growth by the CuPRO process with In-Situ AgBr treatment

Homogeneous CuGaSe 2 thin film growth is limited by slow kinetics of formation. A modified growth process was previously developed to address this issue but requires two separate long, high temperature anneals. Here, we demonstrate that a short AgBr treatment can replace this modified growth process. The AgBr works as a transport agent to catalyze CuGaSe 2 formation and atomic mobility. Furthermore, this treatment results in large grains with homogeneous composition through the bulk. Solar cells made with this material show better performance.

14 SOLAR ENERGY↗
DOE OSTI2026

Testing Scale-Dependent Modified Gravity with DESI DR1

The Dark Energy Spectroscopic Instrument (DESI) provides an unprecedented opportunity to test deviations from general relativity (GR) that introduce a new physical scale within its redshift range. Using the connection between a Yukawa-like potential and the Hu-Sawicki $f(R)$ model, we place strong constraints on the range of a hypothetical fifth force mediated by a massive scalar field. We analyze the power spectrum measurements from DESI Data Release 1 using a baseline EFT model that employs the fkpt approach for the loop integrals. We find no evidence for deviations from GR and obtain the constraint $\log_{10} |f_{R_0}| < -4.59$ (95% C.L.). This corresponds to an upper bound at redshift zero on the scale at which corrections to GR become important, $λ< 17.81$ Mpc, or equivalently, a lower bound on the mass of the additional gravitational mediator of $m_ϕ> 3.60 \times 10^{-31}$ eV. We find that the modified gravity parameter $f_{R_0}$ is largely orthogonal to the cosmological parameters in the model, such that no additional projection effects relative to the GR case are introduced in this Full-Shape analysis. Furthermore, a second modified gravity parameter, the power index $n$, which modulates the time-variation of the associated mass, is found to be consistent with previous analyses that fixed it to unity. Adding DESI BAO data or other cosmological probes does not significantly change these results. The conclusions remain similar if the background evolution is described by evolving dark energy instead of a cosmological constant. Additionally, we test the robustness of the baseline model by varying the maximum wavenumber used in the Full-Shape analysis and analyzing the DESI targets separately. Finally, we analyze the degeneracies between the modified-gravity parameters and the sum of neutrino masses.

Gonzalez, D. [Guanajuato U.; UNAM, CCF] (ORCID:000↗
DOE OSTI2021

Interplay of folded domains and the disordered low-complexity domain in mediating hnRNPA1 phase separation

Abstract Liquid–liquid phase separation underlies the membrane-less compartmentalization of cells. Intrinsically disordered low-complexity domains (LCDs) often mediate phase separation, but how their phase behavior is modulated by folded domains is incompletely understood. Here, we interrogate the interplay between folded and disordered domains of the RNA-binding protein hnRNPA1. The LCD of hnRNPA1 is sufficient for mediating phase separation in vitro. However, we show that the folded RRM domains and a folded solubility-tag modify the phase behavior, even in the absence of RNA. Notably, the presence of the folded domains reverses the salt dependence of the driving force for phase separation relative to the LCD alone. Small-angle X-ray scattering experiments and coarse-grained MD simulations show that the LCD interacts transiently with the RRMs and/or the solubility-tag in a salt-sensitive manner, providing a mechanistic explanation for the observed salt-dependent phase separation. These data point to two effects from the folded domains: (i) electrostatically-mediated interactions that compact hnRNPA1 and contribute to phase separation and (ii) increased solubility at higher ionic strengths mediated by the folded domains. The interplay between disordered and folded domains can modify the dependence of phase behavior on solution conditions and can obscure signatures of physicochemical interactions underlying phase separation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Dynamics of active liquid interfaces

Controlling interfaces of phase-separating fluid mixtures is key to the creation of diverse functional soft materials. Traditionally, this is accomplished with surface-modifying chemical agents. Using experiment and theory, we studied how mechanical activity shapes soft interfaces that separate an active and a passive fluid. Chaotic flows in the active fluid give rise to giant interfacial fluctuations and noninertial propagating active waves. At high activities, stresses disrupt interface continuity and drive droplet generation, producing an emulsion-like active state composed of finite-sized droplets. When in contact with a solid boundary, active interfaces exhibit nonequilibrium wetting transitions, in which the fluid climbs the wall against gravity. These results demonstrate the promise of mechanically driven interfaces for creating a new class of soft active matter.

Science & Technology - Other Topics↗
DOE OSTI2023

Simple Bioparticle Filtration Device Based on an Ultralow-Fouling Zwitterionic Polyurethane Membrane for Rapid Large-Volume Separation of Plasma and Viruses from Whole Blood

Plasma separation from whole blood is oftent required as an essential first step when performing blood tests with a viral assay. However, developing a point-of-care plasma extraction device with a large output and high virus recovery remains a significant obstacle to the success of on-site viral load tests. Here, we report a portable, easy-to-use, cost-efficient, membrane-filtration-based plasma separation device that enables rapid large-volume plasma extraction from whole blood, designed for point-of-care virus assays. The plasma separation is realized by a low-fouling zwitterionic polyurethane-modified cellulose acetate (PCBU-CA) membrane. The zwitterionic coating on the cellulose acetate membrane can decrease surface protein adsorption by 60% and increase plasma permeation by 46% compared with a pristine membrane. The PCBU-CA membrane, with its ultralow-fouling properties, enables rapid plasma separation. The device can yield a total of 1.33 mL plasma from 10 mL whole blood in 10 min. The extracted plasma is cell-free and exhibits a low hemoglobin level. In addition, our device demonstrated a 57.8% T7 phage recovery in the separated plasma. The results of real-time polymerase chain reaction analysis confirmed that the nucleic acid amplification curve of the plasma extracted by our device is comparable to that obtained by centrifugation. With its high plasma yield and good phage recovery, our plasma separation device provides an excellent replacement for traditional plasma separation protocols for point-of-care virus assays and a broad spectrum of clinical tests.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multi-hydrophilic functional network enables porous membranes excellent anti-fouling performance for highly efficient water remediation

Membrane technology is believed as a cost-effective approach for solving the water issues, where as it suffers from serious membrane fouling. Surface grafting and surface coating have been proved to be effective in abating the membrane fouling; however, these processes always need additional procedures and compromise the initial permeance of the membranes. Herein, we developed a kind of highly permeable polyacrylonitrile (PAN) membranes with excellent anti-fouling performance through one-step phase inversion of the PAN casting solution containing water-soluble active additives. During the process, the water-soluble active additives could segregate towards the membrane surface and pore walls; thereby finely tailoring the pore structures of the PAN-based membranes. Moreover, the active additives could react with each other to form crosslinked networks containing multi-hydrophilic functional groups including CH2-O-CH2, -OH or-Si-OH. Consequently, the PAN-based membranes exhibited surprising superhydrophilicity with water contact angle below 10. even after soaking in water for one week and the anti-fouling permeance of the membranes increased significantly with permeance recovery rate above 93%. Interestingly, the modified membranes also demonstrated both high permeances and high separation efficiency, thereby showing strong promise in water environmental remediation including wastewater treatment and oil/water emulsion separation.

Anti-fouling↗
DOE OSTI2025

Impacts of molecular architecture on the radiation-induced degradation and reaction kinetics of hydrophobic diglycolamides with the solvated electron and the dodecane radical cation

Given their proposed use as trivalent actinide–lanthanide separation ligands, the role of molecular architecture on the radiation robustness of diglycolamide (DGA) molecules has been investigated. This study examined three prototypical molecules with differences in their aliphatic chain architecture: N,N,N′,N′-tetra(n-octyl)diglycolamide (TODGA), N,N,N′,N′-tetra(2-ethylhexyl)diglycolamide (T2EHDGA), and N,N′-dimethyl-N,N′-dioctyldiglycolamide (DMDODGA). Rate coefficients and activation parameters are reported for the reactivity of each DGA with the solvated electron (e solv − ) and the corresponding dodecane radical cation (RH˙ + ) over the temperature range of 10.0 to 44.1 °C. These measurements indicate that DMDODGA is the most chemically reactive with both transient radicals, which may be attributed to this molecule's more accessible backbone. Complementary gamma dose accumulation studies (≤ 600 kGy) under envisioned process conditions—50 mM DGA in n-dodecane solvent—afforded dose constants for the loss of DGA of d = (3.41 ± 0.07) × 10 −3 , (4.19 ± 0.09) × 10 −3 , and (4.65 ± 0.09) × 10 −3 kGy −1 for T2EHDGA, DMDODGA, and TODGA, respectively. These dose constants indicate that varying DGA architecture affords subtle differences in chemical reactivity, leading to varying rates of radiolytic degradation under envisioned actinide–lanthanide separation conditions. However, more ambitious DGA frameworks, such as modifying the backbone, branching of the aliphatic chains, and/or changing the size of the chain may be required for larger gains in radiolytic longevity while optimizing actinide–lanthanide selectivity.

Arrhenius parameters↗
DOE OSTI2024

Mneme

A simple tool allowing recording the execution of a GPU (CUDA) kernel and replaying that kernel as an independent executable. The tool operates in 3 phases. During compile time the user needs to apply a provided LLVM pass to instrument the code. The pass detects all device global variables and device functions and stores this information with the respective LLVM-IR in the global device memory. The compilation generates a record-able executable. The second phase involves running the application executable with a desired input and using LD_PRELOAD to enable recording. When recording before invoking a device kernel the pre-loaded library stores device memory in persistent storage and associates the memory with the device kernel and an LLVM IR file. At the end of the recorded execution the pre-load library generates a database in the form of a JSON file containing information regarding the LLVM-IR files and the snapshots of device memory. During the third and last phase the user can replay the execution of an kernel as a separate independent executable. Besides executing it the user can modify the LLVM IR file and auto-tune parameters such as kernel launch-bounds or kernel runtime execution parameters (e.g. Kernel Block and Grid Dimensions). Is

Parasyris, Konstantinos↗
DOE OSTI2021

Segregation resistant perovskite oxides with surface modification

A method and a composition to stabilize the surface cation chemistry of the perovskite or related oxides, and thus, to minimize or completely avoid the detrimental segregation and phase separation of dopant cations at the surface can include modifying the surface with more oxidizable metal cations and/or more oxidizable metal oxides, thereby reducing the oxygen vacancy concentration at the very surface.

Yildiz, Bilge↗
DOE OSTI2025

Nanofiltration Membranes for Li + /Mg 2+ Separation: Materials and Mechanisms

Nanofiltration (NF) membranes have garnered significant interest for Li + /Mg 2+ separation, a crucial step in lithium extraction from brines. The state-of-the-art commercial LiNE-XD membrane exhibits a Li + /Mg 2+ separation factor (SF Li/Mg ) of 42 at pH 3.3, due to the positive charges on the membrane surface and its strong size-sieving ability. Membranes with higher separation factors at a broad pH range are being pursued to improve separation efficiency. This work aims to provide a timely and comprehensive assessment of advanced NF membranes with superior Li + /Mg 2+ separation properties, as well as their structure and property relationships for designing next-generation membranes. We describe transport mechanisms for ions in NF membranes and discuss governing parameters and models employed to quantify the Li + /Mg 2+ separation. High-performance membrane materials are exhaustively introduced, including commercial and modified polyamides, two-dimensional materials, metal–organic frameworks, crown ethers, and their blends. Finally, we critically compare these membranes in an upper bound plot and highlight the opportunities and challenges of NF membranes for practical Li + /Mg 2+ separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The Role of Phase Separation on Rayleigh-Plateau Type Instabilities in Alloys

Classical molecular dynamics (MD) simulations are used to investigate the role of phase separation (PS) on the Rayleigh-Plateau (RP) instability. Ni–Ag bulk structures are created at temperatures (2000 K and 1400 K) that generate different PS length scales, λ PS , relative to the RP instability length scale, λRP. Rectanguloids are then cut from the bulk structures and patterned with a perturbation of certain amplitude and wavelength, λ RP . It is found that when λ PS << λ RP (2000 K), the patterned rectanguloids break up into nanoparticles in a manner consistent with classical RP theory, whereas when λ PS << λ RP (1400 K), soluto-capillarity affects the RP instability significantly. Specifically, since Ag has a lower surface energy than Ni, Ag migrates to cover neighboring Ni regions, therefore modifying the RP instability. Thus, we demonstrate that the phase separation length scale of an immiscible alloy can be exploited to direct the assembly of functional bimetallic alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dianhydride-Modified Graphitic Carbon Nitride as a Support for Cobalt Single-Atom Photocatalysts

Graphitic carbon nitride (C 3 N 4 ) has been widely explored as a photoactive support for single-atom catalysts (SACs). In this paper, three different π-rich aromatic dianhydrides are employed to introduce molecular quantized trap states into the conduction band of C 3 N 4 to facilitate efficient charge-separation and to promote an enhanced photocatalytic CO 2 reduction response. These modified C 3 N 4 materials have been characterized structurally and spectroscopically for use as the support for Co-based SACs. In photocatalytic CO 2 reduction studies, the Co SAC on naphthalene dianhydride doped C 3 N 4 exhibited the highest activity and selectivity towards CO production among the Co SACs tested in this work. The observed improvement in photocatalytic CO 2 -to-CO conversion activity correlates with trends in photoinduced charge separation, as revealed by photoluminescence spectroscopy.

14 SOLAR ENERGY↗
DOE OSTI2024

Pressure-Gradient-Based RANS Model for Predicting Separation in Transitional and Turbulent Flows

Predicting flow separation poses a significant challenge for RANS models, particularly in transitional flows over airfoils. We propose a novel improvement to RANS models to predict incipient separation in both transitional and fully turbulent flows. Our approach modifies the eddy viscosity model in regions indicated by a pressure-gradient criterion that accounts for intermittency - determining whether the boundary layer is laminar or turbulent. This model demonstrates robust generalization across various airfoil shapes and Reynolds numbers. Applied to the NREL Phase VI wind turbine rotor, our model shows improved aerodynamic performance predictions compared to the baseline RANS model.

k-omega SST↗
DOE OSTI2025

Simulated Moving Bed Process for CO 2 Capture from Humid Postcombustion Flue Gases Using MUF-16

Simulated moving bed (SMB) designs are increasingly being adapted for the separation of multicomponent gaseous mixtures. In this work, we develop a modified SMB process for capturing CO 2 from humid postcombustion flue gas using MUF-16 (MUF = Massey University Framework). MUF-16 shows excellent selectivity for CO 2 over N 2 , moderate heats of adsorption for CO 2 and H 2 O, and no competitive sorption of CO 2 over water at relative humidities relevant to postcombustion capture. We utilize these characteristics to propose a continuous process that uses N 2 from the feed as the desorbent for the water, eliminating the need for a separate desiccant bed and allowing for localized heating during desorption for H 2 O-saturated MOF beds. Single-component isotherms, single-column breakthrough experiments, and SO 2 stability tests suggest the excellent suitability of MUF-16 to this separation via the proposed SMB design.

CO2 capture from humid flue gas↗
DOE OSTI2024

Discerning the effect of various irradiation modes on the corrosion of Zircaloy-4

Using proton irradiation, this study investigates the individual influence of several factors on the corrosion kinetics of Zircaloy-4 in a hydrogenated water environment simulating a Pressurized Water Reactor (PWR). Using both simultaneous irradiation-corrosion and autoclave corrosion, we separately examine: (i) the effect of pre-irradiation on modifying the structure of the material, (ii) the impact of irradiation on creating defects in the growing oxide layer during corrosion, and (iii) the influence of irradiation on increasing the corrosion potential through radiolysis during corrosion. To replicate neutron-irradiated microstructure, two proton pre-irradiation schedules were employed: Schedule 1 (isothermal irradiation at 350 °C to 5 dpa) to simulate high-temperature PWR conditions, and Schedule 2 (two-step process: irradiation to 2.5 dpa at -10 °C followed by 2.5 dpa at 350 °C) to simulate lower temperature PWR and Boiling Water Reactor (BWR) conditions. Long-term autoclave corrosion testing over 360 days at 320 °C revealed no significant difference between unirradiated samples and those pre-irradiated according to either schedule, with all samples exhibiting sub-cubic kinetics within the pre-transition regime. Irradiated samples underwent Simultaneous Irradiation Corrosion (SIC) tests, corroding in 320 °C water while being irradiated with protons. Corrosion was found to accelerate in all SIC-tested samples relative to autoclave conditions, with the greatest increase observed in non-pre-irradiated samples. Pre-irradiation with either schedule resulted in a slower corrosion rate compared to non-pre-irradiated regions under SIC conditions. The degree of radiolysis observed in the SIC tests surpassed typical PWR conditions, approaching levels found in BWRs. Radiolysis products were identified as the primary contributors to accelerated corrosion, corroborated by radiolysis bar tests. Furthermore, these findings underscore the intricate interactions between irradiation, corrosion, and water chemistry in determining Zircaloy-4 corrosion kinetics within nuclear reactor environments.

Pressurized Water Reactor↗
DOE OSTI2022

Exploration of two surfaces observed in Weyl semimetal BaMnSb 2

Single crystalline BaMnSb 2 is considered as a 3D Weyl semimetal with the 2D electronic structure containing Dirac cones from the Sb sheet. We report experimental investigation of low-temperature cleaved BaMnSb 2 surfaces using scanning tunneling microscopy/spectroscopy and low energy electron diffraction. By natural cleavage, we find two terminations: one is Ba (above the orthorhombically distorted Sb sheet) and another Sb2 (at the surface of the Sb/Mn/Sb sandwich layer). Both terminations show the 2×1 surface reconstructions, with drastically different morphologies and electronic properties, however. The reconstructed structures, defect types and nature of the electronic structures of the two terminations are extensively studied. The quasiparticle interference (QPI) analysis is conducted at the energy range between -2 V and 2 V, although no interesting states are observed near the Fermi level, the surface-projected electronic band structures strongly depend on the surface termination above 1.6 V. The existence of defects can greatly modify the local density of states to create electronic phase separations on the surface in the order of tens of nm scale. Our observation on the atomic structures of the terminations and the corresponding electronic structures provides critical information towards an understanding of topological properties of BaMnSb 2 .

36 MATERIALS SCIENCE↗