Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microwave conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Elucidating the Role of a Tetrafluoroborate-Based Ionic Liquid at the n-Type Oxide/Perovskite Interface

Halide perovskites are currently one of the most heavily researched emerging photovoltaic materials. Despite achieving remarkable power conversion efficiencies, perovskite solar cells have not yet achieved their full potential, with the interfaces between the perovskite and the charge-selective layers being where most recombination losses occur. In this study, a fluorinated ionic liquid (IL) is employed to modify the perovskite/SnO 2 interface. Using Kelvin probe and photoelectron spectroscopy measurements, it is shown that depositing the perovskite onto an IL-treated substrate results in the crystallization of a perovskite film which has a more n-type character, evidenced by a decrease of the work function and a shift of the Fermi level toward the conduction band. Photoluminescence spectroscopy and time-resolved microwave conductivity are used to investigate the optoelectronic properties of the perovskite grown on neat and IL-modified surfaces and it is found that the modified substrate yields a perovskite film which exhibits an order of magnitude lower trap density than the control. When incorporated into solar cells, we report this interface modification results in a reduction in the current-voltage hysteresis and an improvement in device performance, with the best performing devices achieving steady-state PCEs exceeding 20%.

14 SOLAR ENERGY↗

Delocalization Drives Free Charge Generation in Conjugated Polymer Films

We demonstrate that the product of photoinduced electron transfer between a conjugated polymer host and a dilute molecular sensitizer is controlled by the structural state of the polymer. Ordered semicrystalline solids exhibit free charge generation, while disordered polymers in the melt phase do not. We use photoluminescence (PL) and time-resolved microwave conductivity (TRMC) measurements to sweep through polymer melt transitions in situ. Free charge generation measured by TRMC turns off upon melting, whereas PL quenching of the molecular sensitizers remains constant, implying unchanged electron transfer efficiency. The key difference is the intermolecular order of the polymer host in the solid state compared to the melt. We propose that this order-disorder transition modulates the localization length of the initial charge-transfer state, which controls the probability of free charge formation.

36 MATERIALS SCIENCE↗

Modeling the Free Carrier Recombination Kinetics in PTB7:PCBM Organic Photovoltaics

Currently the exact recombination mechanism of free carriers in organic photovoltaic (OPV) devices is poorly understood. Often a reduced Langevin model is used to describe the decay behavior of electrons and holes. Here we propose a novel, simple kinetic model that accurately describes the decay behavior of free carriers in the PTB7:PCBM organic photovoltaic blend. In order to accurately describe the recombination behavior of free carriers as measured by time-resolved microwave conductivity (TRMC), this model needs to only take into account free and trapped holes in the polymer, and free electrons in the fullerene. The model is consistent for different PTB7:PCBM blend ratios and spans a light intensity range of over 3 orders of magnitude. Furthermore, the model demonstrates that dark carriers exist in the polymer and interact with photoinduced charge carriers, and that the trapping and detrapping rates of the holes are of high importance to the overall carrier lifetime.

14 SOLAR ENERGY↗

BODIPY based A-D-A molecules: Effect of CF3 group substitution at meso phenyl group

Two pairs of A-D-A molecules have been created with fluorene and benzodithiophene as the central donor subunits and terminal BODIPY units, functionalized with either a 4-methylphenyl or 4-trifluoromethylphenyl group at the meso position. The effect of the para substituent of the meso phenyl group on the photophysical properties of these molecules is studied through steady state absorption and fluorescence spectroscopy as well as femtosecond transient absorption and time resolved fluorescence spectroscopy techniques. Applicability of these molecules as donors in solution processed solar cell active layers was investigated through time resolved microwave conductivity measurements on blends with PC60BM acceptor, which shows a varying yield of charge transfer with choice of substituent. Transient absorption spectroscopy is then employed to investigate the role of the 4-trifluoromethylphenyl group in altering the efficiency of charge transfer from these A-D-A molecules to PC60BM. The results show a consistent picture of picosecond charge transfer and a component of a few hundred ps geminate recombination that results in a small yield of long-lived free charges optimized for the methylphenyl derivatives.

36 MATERIALS SCIENCE↗

Reconciling the Driving Force and the Barrier to Charge Separation in Donor–Nonfullerene Acceptor Films

We investigate the dependence of charge yields on the driving force for photoinduced electron transfer in a series of all-small-molecule, semiconducting films made from indacenodithiophene nonfullerene acceptors (IDT NFAs). In contrast to reports of efficient, barrierless charge separation at near zero driving force for NFA-containing organic photovoltaics, we find that barrierless charge separation occurs only if the driving force is sufficient to overcome the Coulomb potential, =300 meV, based on time-resolved microwave conductivity and PL quenching measurements of 5 mmolal sensitized and 700 mmolal blended films comprising IDT NFAs paired with three different donors. This discrepancy with recent literature is caused by a difference in the way that we calculate driving force. Far from being semantic, the driving force calculation is crucial because its value controls the mechanisms needed to explain experimental observations. We provide a candid assessment of the uncertainties for our methods and popular ones used in the literature and emphasize the importance of standardizing methods across this field.

14 SOLAR ENERGY↗

Defect-Limited Mobility and Defect Thermochemistry in Mixed A-Cation Tin Perovskites: (CH3NH3)1-xCsxSnBr3

Hybrid organic-inorganic semiconductors crystallizing in the perovskite structure present a significant opportunity for realizing defect-tolerant semiconductors. In this work, we examine the solid solution, (CH3NH3)1-xCsxSnBr3, and identify the thermochemistry dictating the intrinsic carrier concentrations and how local structural distortions influences this electronic behavior. This family of compounds exhibits the expected systematic trend in decreasing optical gap with the cesium to methylammonium A-site mixing ratio, x, in the visible region. However, the carrier mobility, as determined from time-resolved microwave conductivity measurements, trends opposite to that expected from first-principles calculations combined with Boltzmann scattering theory calculations of the carrier mobility. We propose that this is a result of increasing carrier scattering with x in (CH3NH3)1-xCsxSnBr3 due to a significant increase in the carrier density with x. By examining the dependence of the carrier density as a function of x, we infer the compositional-dependence of the average enthalpy and nonconfigurational entropy per defect. While diffraction reveals a cubic aristotypic perovskite structure as a function of x at room temperature, the pair distribution functions obtained from synchrotron X-ray total scattering from these materials are better described by symmetry-adapted displacement modes of the Pm3m crystal structure, which we attribute to a large degree of anharmonic dynamics of the atom positions. This analysis shows that CH3NH3+-rich compositions retain mostly linear Sn-Br-Sn bonding environments through the displacements, while Cs+-rich compositions lead to more significantly bent Sn-Br-Sn environments. We propose that these bent bonding arrangements in Cs-rich compositions yield a higher propensity for defect formation. This also provides a rationale for carrier trapping that gives rise to anomalous microwave transients. Together, these results provide insight into the structure-dynamics-properties relationships in this highly anharmonic system with high amplitude atomic motions and low defect formation energies.

defect thermochemistry↗

Simplifying the Chemical Design of Nonfused-Ring Electron Acceptors─Lessons Learned from Thienothiophene and Benzodithiophene Cores

Nonfused-ring electron acceptors (NFREA)s have been proposed as alternatives to fused-ring acceptors in organic photovoltaics (OPV)s. The simpler molecular design of NFREAs results in a reduced synthetic complexity, potentially lowering manufacturing costs, and easier access to desired optoelectronic properties by structural modifications. However, they have not seen the same rise in popularity as fused nonfullerene acceptors (NFA)s due to their lower performances in devices. In this work, we explore structure–property relationships of three NFREA molecules based on thieno[3,2-b]thiophene (TT) and benzo[1,2-b:4,5-b′]dithiophene (BDT) cores and malononitrile functionalized-isatin end group acceptors. We describe their synthetic routes, computational analysis, and photophysical and electronic properties. Here, we investigated the effect of changing the core from TT to BDT on electronic properties of the molecules─a result of raising/lowering of the frontier molecular orbital (FMO) levels. We also explored the effect of branched vs nonbranched alkyl groups on the morphological and blend-capabilities in bulk heterojunction (BHJ) OPV devices. These effects were then reflected in the overall device performances, primarily due to favorable FMO energy alignment between the NFREA and polymer. To investigate the behavior of the excited states of the NFREAs within the active layer of the devices, we performed time-resolved microwave conductivity and transient absorption experiments, which confirmed that the TT molecules exhibited very low conductance while the BDT molecule showed moderate photoconductance. Our combined theoretical, synthetic, device, and charge carrier dynamics studies of these materials reveal the central role that structure–property relationships play in future molecular designs of NFREAs that can perform as well as their fused counterparts.

14 SOLAR ENERGY↗

Integrating theory, synthesis, spectroscopy and device efficiency to design and characterize donor materials for organic photovoltaics: a case study including 12 donors

There have been remarkable improvements in the power conversion efficiency of solution-processable Organic Photovoltaics (OPV) have largely been driven by the development of novel narrow bandgap copolymer donors comprising an electron-donating (D) and an electron-withdrawing (A) group within the repeat unit. The large pool of potential D and A units and the laborious processes of chemical synthesis and device optimization, has made progress on new high efficiency materials slow with a few new efficient copolymers reported every year despite the large number of groups pursuing these materials. In our paper we present an integrated approach toward new narrow bandgap copolymers that uses theory to guide the selection of materials to be synthesized based on their predicted energy levels, and time-resolved microwave conductivity (TRMC) to select the best-performing copolymer–fullerene bulk heterojunction to be incorporated into complete OPV devices. We validate our methodology by using a diverse group of 12 copolymers, including new and literature materials, to demonstrate good correlation between (a) theoretically determined energy levels of polymers and experimentally determined ionization energies and electron affinities and (b) photoconductance, measured by TRMC, and OPV device performance. The materials used here also allow us to explore whether further copolymer design rules need to be incorporated into our methodology for materials selection. For example, we explore the effect of the enthalpy change (ΔH) during exciton dissociation on the efficiency of free charge carrier generation and device efficiency and find that ΔH of -0.4 eV is sufficient for efficient charge generation.

14 SOLAR ENERGY↗

Molecular engineering to improve carrier lifetimes for organic photovoltaic devices with thick active layers

The morphology of the bulk heterojunction absorber layer in an organic photovoltaic (OPV) device has a profound effect on the electrical properties and efficiency of the device. Previous work has consistently demonstrated that the solubilizing side-chains of the donor material affect these properties and device performance in a non-trivial way. Here, using Time-Resolved Microwave Conductivity (TRMC), we show by direct measurements of carrier lifetimes that the choice of side chains can also make a substantial difference in photocarrier dynamics. We have previously demonstrated a correlation between peak photoconductance measured by TRMC and device efficiencies; here, we demonstrate that TRMC photocarrier dynamics have an important bearing on device performance in a case study of devices made from donor materials with linear vs. branched side-chains and with variable active layer thicknesses. We use Grazing-Incidence Wide Angle X-ray Scattering to elucidate the cause of the different carrier lifetimes as a function of different aggregation behavior in the polymers. Consequently, the results help establish TRMC as a technique for screening OPV donor materials whose devices maintain performance in thick active layers (>250 nm) designed to improve light harvesting, film reproducibility, and ease of processing.

14 SOLAR ENERGY↗

Polymer nanoparticle photocatalysts realized in non-aqueous solvents

Colloidal organic nanoparticles (oNPs) have emerged as a promising category of photocatalyst, thanks to their long-lived surface-bound charges, electronic tunability, and strong absorption in the visible spectrum. Our previous research has established a direct correlation between charge generation in oNPs and their photocatalytic activity, highlighting their effectiveness as a framework for stable, long-lived free carriers. However, oNPs have been restricted to use only in aqueous environments as a result of being synthesized via either nano-emulsion or nano-precipitation procedures. Herein, we present a method for transferring oNP photocatalysts from water into polar non-aqueous solvents while retaining their long-term colloidal stability. We observed that the polymer chains in the solvent-transferred oNPs rearrange from a predominantly H-aggregate structure in water to a combination of H- and J-aggregate characteristics in N,N-dimethylformamide, suggesting a dynamic rearrangement in response to the new solvent environment. Importantly, transient absorption and time-resolved microwave conductivity measurements confirm that the solvent-transferred oNPs maintain their ability to generate free charges at an internal heterojunction. This development opens unique opportunities for eventually leveraging light-generated, long-lived electrons and holes in synthetic redox chemistry across diverse solvent environments, a direction that will be explored in future studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A faux hawk fullerene with PCBM-like properties

Reaction of C 60 , C 6 F 5 CF 2 I, and SnH(n-Bu) 3 produced, among other unidentified fullerene derivatives, the two new compounds 1,9-C 60 (CF 2 C 6 F 5 )H (1) and 1,9-C 60 (cyclo-CF 2 (2-C 6 F 4 )) (2). The highest isolated yield of 1 was 35% based on C60. Depending on the reaction conditions, the relative amounts of 1 and 2 generated in situ were as high as 85% and 71%, respectively, based on HPLC peak integration and summing over all fullerene species present other than unreacted C60. Compound 1 is thermally stable in 1,2-dichlorobenzene (oDCB) at 160 °C but was rapidly converted to 2 upon addition of Sn 2 (n-Bu) 6 at this temperature. In contrast, complete conversion of 1 to 2 occurred within minutes, or hours, at 25 °C in 90/10 (v/v) PhCN/C 6 D 6 by addition of stoichiometric, or sub-stoichiometric, amounts of proton sponge (PS) or cobaltocene (CoCp 2 ). DFT calculations indicate that when 1 is deprotonated, the anion C 60 (CF 2 C 6 F 5 )- can undergo facile intramolecular SNAr annulation to form 2 with concomitant loss of F-. To our knowledge this is the first observation of a fullerene-cage carbanion acting as an S N Ar nucleophile towards an aromatic C–F bond. The gas-phase electron affinity (EA) of 2 was determined to be 2.805(10) eV by low-temperature PES, higher by 0.12(1) eV than the EA of C 60 and higher by 0.18(1) eV than the EA of phenyl-C 61 -butyric acid methyl ester (PCBM). In contrast, the relative E 1/2 (0/-) values of 2 and C 60 , -0.01(1) and 0.00(1) V, respectively, are virtually the same (on this scale, and under the same conditions, the E1/2(0/-) of PCBM is -0.09 V). Time-resolved microwave conductivity charge-carrier yield × mobility values for organic photovoltaic active-layer-type blends of 2 and poly-3-hexylthiophene (P3HT) were comparable to those for equimolar blends of PCBM and P3HT. The structure of solvent-free crystals of 2 was determined by single-crystal X-ray diffraction. The number of nearest-neighbor fullerene–fullerene interactions with centroid···centroid (⊙···⊙) distances of ≤10.34 Å is significantly greater, and the average ⊙···⊙ distance is shorter, for 2 (10 nearest neighbors; ave. ⊙···⊙ distance = 10.09 Å) than for solvent-free crystals of PCBM (7 nearest neighbors; ave. ⊙···⊙ distance = 10.17 Å). Finally, the thermal stability of 2 was found to be far greater than that of PCBM.

14 SOLAR ENERGY↗

Charge Concentration Limits the Hydrogen Evolution Rate in Organic Nanoparticle Photocatalysts

Colloidal organic nanoparticles have proven to be a promising class of photocatalyst for performing the Hydrogen Evolution Reaction (HER) due to their dispersibility in aqueous environments, their strong absorption within the visible region, and the tunabilty of their component materials' redox potentials. Currently, there is little understanding of how charge generation and accumulation in organic semiconductors change when these materials are formed into nanoparticles that share a high interfacial area with water, nor is it known what mechanism limits the hydrogen evolution efficiency in recent reports on organic nanoparticle photocatalysts. Herein, we use Time-Resolved Microwave Conductivity to study aqueous-soluble organic nanoparticles and bulk thin films composed of various blend ratios of the non-fullerene acceptor EH-IDTBR and conjugated polymer PTB7-Th and examine the relationship between composition, interfacial surface area, charge carrier dynamics, and photocatalytic activity. We quantitatively measure the rate of Hydrogen Evolution Reaction by nanoparticles composed of various donor:acceptor blend ratio compositions and find that the most active blend ratio displays a Hydrogen Quantum Yield of 0.83% per photon. Moreover, we find that nanoparticle photocatalytic activity corresponds directly to charge generation, and that nanoparticles have 3x more long-lived accumulated charges relative to bulk samples of the same material composition. Here these results suggest that, under our current reaction conditions, with approximately 3x solar flux, catalytic activity by these nanoparticles is limited by the concentration of electrons and holes in operando and not a finite number of active surface cites or the catalytic rate at the interface. This provides a clear design goal for the next generation of efficient photocatalytic nanoparticles.

08 HYDROGEN↗