Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Inorganic “Conductive Glass” Approach to Rendering Mesoporous Metal–Organic Frameworks Electronically Conductive and Chemically Responsive

A representative mesoporous metal–organic-framework (MOF) material, NU-1000, has been rendered electronically conductive via a robust inorganic approach that permits retention of MOF crystallinity and porosity. The approach is based on condensed-phase grafting of molecular tin species onto the MOF nodes via irreversible reaction with hydroxyl and aqua ligands presented at the node surface, a self-limiting process termed solvothermal installation (of metal ions) in MOFs (SIM, a solution-phase analog of atomic layer deposition in MOFs). Treatment of the modified MOF with aerated steam at 120 °C converts the grafted tin molecules to tetratin(IV)oxy clusters, with the clusters being sited between insulating pairs of zirconia-like nodes (the zirconium component being key to endowing the parent material with requisite chemical and thermal stability). By introducing new O–H presenting ligands on the modified-MOF node, the high-temperature steam step additionally serves to reset the material to reactive form, thus enabling a second self-limiting tin-grafting step to be run (and after further steam treatment, enabling a third). Difference-envelop-density (DED) analyses of synchrotron-derived X-ray scattering data, with and without installed tin species, show that the clusters formed after one cycle are spatially isolated, but that repetitive SIM cycling adds metal and oxygen ions in a way that enshrouds nodes, links clusters, and yields continuous one-dimensional strands of oxy-tin(IV), oriented exclusively along the c axis of the MOF. Two-probe conductivity measurements show that the parent MOF and the version containing isolated oxy-tin(IV) clusters are electrically insulating, but that the versions featuring continuous strands show an electrical conductivity of 1.8 × 10–7 S/cm after three Sn-SIM cycles. When combined with interdigitated microelectrodes, the solvent-free and conductive-glass-modified material (three Sn-SIM cycles) displays a substantial and persistent increase in electrical conductivity during exposure to 5% H2, indicating a role for dissociated H2 as an electronic dopant. The increase can be repetitively reversed by alternating H2 with air, illustrating the ability of the conductive MOF to function as a resistive sensor for H2 and suggesting further potential applications that may capitalize on the combination of high volumetric surface area, high mesoporosity, high chemical and thermal stability, and significant electrical conductivity.

bio-inspired↗

Optimization of mesoporous carbon structures for lithium–sulfur battery applications

Mesoporous carbon (MC) with tunable pore sizes (22nm, 12nm, 7nm, and 3nm) and pore volumes (from 1.3 to 4.8 cc/g) containing sulfur inside the pores were systematically studied as mesoporous carbon-sulfur (MCS) composite electrodes for Li-S batteries. Investigation on these MCS composites reveals that the pore structure has no influence on the battery performance at full sulfur loading conditions (the pore volume is fully filled by sulfur) but the maximum sulfur loading capability is higher for MC with larger pore volume. MC with large pore volumes, partial sulfur filling (part of the pore volume left unfilled), and surface modification, can have reasonably high sulfur loading, improved electrical and ionic contacts of sulfur with MC and with electrolytes, which subsequently promotes the battery performance. An initial capacity of ~1250 mAh/g (based on sulfur) and 650 mAh/g capacity retention over 100 cycles were obtained with 50 wt% sulfur loading in the MC with 22nm pore size (4.8 cc/g). When the surface of MCS was coated with Clevios P to reduce the dissolve of polysulfide anions in electrolytes, it exhibits a high initial discharge capacity of ~1390 mAh/g and improved cycling stability with capacity retention of ~840 mAh/g over 100 cycles. The reported correlation among the structure, sulfur filling, surface modification and the electrochemical performance of the MCS composite cathodes provides guidance in designing new electrodes for lithium-sulfur batteries

25 ENERGY STORAGE↗

Mesoporous cobalt/manganese oxide: a highly selective bifunctional catalyst for amine–imine transformations

Here, we discuss a heterogeneous catalytic protocol using cobalt doped mesoporous manganese oxide for amine–alcohol cross-coupling to selectively produce symmetric or asymmetric imines. Thorough investigations on the surface chemistry and physical properties of the material revealed its outstanding oxidation–reduction properties and reaction mechanism which was supported by quantum mechanical calculations done by using density functional theory (DFT).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytically active Au-O(OH) x - species stabilized by alkali ions on zeolites and mesoporous oxides

Here we report that the addition of alkali ions (sodium or potassium) to gold on KLTL-zeolite and mesoporous MCM-41 silica stabilizes mononuclear gold in Au-O(OH) x -(Na or K) ensembles. This single-site gold species is active for the low-temperature (<200°C) water-gas shift (WGS) reaction. Unexpectedly, gold is thus similar to platinum in creating –O linkages with more than eight alkali ions and establishing an active site on various supports. The intrinsic activity of the single-site gold species is the same on irreducible supports as on reducible ceria, iron oxide, and titania supports, apparently all sharing a common, similarly structured gold active site. This finding paves the way for using earth-abundant supports to disperse and stabilize precious metal atoms with alkali additives for the WGS and potentially other fuel-processing reactions.

36 MATERIALS SCIENCE↗

Superior Fischer-Tropsch Performance of Uniform Cobalt Nanoparticles Deposited into Mesoporous SiC

Electrochemically-derived well-crystalline mesoporous silicon carbide (pSiC) was used to host cobalt nanoparticles and to show superior catalytic performance during the CO hydrogenation according to Fischer-Tropsch. Colloidal metal particles (9 ± 0.4 nm) were prepared independently before depositing them into pSiC and, for comparison purposes, into commercially available silica (Davisil) and foam-like MCF-17 supports. The Co/pSiC catalyst demonstrated the highest catalytic activity of 117 ?molCO gCo-1 s-1 at 220 °C in the Fischer-Tropsch reaction, while the silica supported cobalt samples showed about one order of magnitude less activity. A significant increase in the C5+ hydrocarbons selectivity for Co/pSiC was observed. The stable performance of the catalyst is attributed to the high dispersion of the active phase and the use of silicon carbide acting as a thermally conductive and chemically inert porous support.

lablokou, V. S.↗

Comprehensive Magnetic Study of Nanostructured Mesoporous Manganese Oxide Materials and Implications for Catalytic Behavior

Magnetic behavior of nanostructured mesoporous manganese oxide materials, designated UCT-1 and UCT-18, were studied using a combination of superconducting quantum interference device (SQUID) magnetometry and 55 Mn zero-field spin–echo nuclear magnetic resonance (NMR). Curie–Weiss fits to the magnetic susceptibility for the UCT-1 and UCT-18 samples calcined at 550 °C yielded paramagnetic moment values consistent with spin-only Mn 3+ ions in the α-Mn 2 O 3 phase ( S = 2, 4.90 μ B ). However, the magnetization and NMR results reported here clearly identify a small amount of the Mn 3 O 4 second phase (ferrimagnetic with T C ≈ 43 K) that does not appear in X-ray diffraction (XRD). We report the study resulted in the observation of fascinating magnetic behavior: (1) exchange bias, which occurs in cases where a ferromagnetic (or ferrimagnetic) phase forms a boundary with an antiferromagnetic phase and (2) a magnetic contribution attributed to uncompensated spins on the surfaces of the α-Mn 2 O 3 nanoparticles. The presence of Mn 3 O 4 and the interplay of Mn 3+ and Mn 2+ impact the catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Large Mesoporous–Macroporous and High Pore Volume, Mixed Crystallographic Phase Manganese Oxide, Mn 2 O 3 /Mn 3 O 4 Sponge

The controlled synthesis of mixed crystallographic phase Mn 2 O 3 /Mn 3 O 4 sponge material by varying heating rates and isothermal segments provides valuable information about the morphological and physical properties of the obtained sample. The well-characterized Mn 2 O 3 /Mn 3 O 4 sponge and applicability of difference in reactivity of H 2 and CO 2 desorbed during the synthesis provide new developments in the synthesis of metal oxide materials with unique morphological and surface properties. Here, we report the preparation of a Mn 2 O 3 /Mn 3 O 4 sponge using a metal nitrate salt, water, and Dextran, a biopolymer consisting of glucose monomers. The Mn 2 O 3 /Mn 3 O 4 sponge prepared at 1 °C·min –1 heating rate to 500 °C and held isothermally for 1 h consisted of large mesopores–macropores (25.5 nm, pore diameter) and a pore volume of 0.413 mL/g. Furthermore, the prepared Mn 2 O 3 /Mn 3 O 4 and 5 mol %–Fe-Mn 2 O 3 /Mn 3 O 4 sponges provide potential avenues in the development of solid-state catalyst materials for alcohol and amine oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Characterization of Mesoporous Co/CeO 2 Catalysts for the High-Temperature Water-Gas Shift

Here, mesoporous Co/CeO 2 catalysts were found to exhibit significant activity for the high-temperature water-gas shift (WGS) reaction with cobalt loadings as low as 1 wt %. The catalysts feature a uniform dispersion of cobalt within the CeO 2 fluorite type lattice with no evidence of discrete cobalt phase segregation. In situ XANES and ambient pressure XPS experiments were used to elucidate the active state of the catalysts as partially reduced cerium oxide doped with oxidized cobalt atoms. In situ XRD and DRIFTS experiments suggest facile cerium reduction and oxygen vacancy formation, particularly with lower cobalt loadings. In situ DRIFTS analysis also revealed the presence of surface carbonate and bidentate formate species under reaction conditions, which may be associated with additional mechanistic pathways for the WGS reaction. Deactivation behavior was observed with higher cobalt loadings. XANES data suggest the formation of small metallic cobalt clusters at temperatures above 400 °C may be responsible. Notably, this deactivation was not observed for the 1% cobalt loaded catalyst, which exhibited the highest activity per unit of cobalt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗