Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “measurement data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Determination of instrumentation errors from measured data using maximum likelihood method

The maximum likelihood method is used for estimation of unknown initial conditions, constant bias and scale factor errors in measured flight data. The model for the system to be identified consists of the airplane six-degree-of-freedom kinematic equations, and the output equations specifying the measured variables. The estimation problem is formulated in a general way and then, for practical use, simplified by ignoring the effect of process noise. The algorithm developed is first applied to computer generated data having different levels of process noise for the demonstration of the robustness of the method. Then the real flight data are analyzed and the results compared with those obtained by the extended Kalman filter algorithm.

Keskar, D. A.↗
NASA NTRS1977

Estimation of terrain iso-gradients from a stochastic range data measurement matrix

The problem of estimating terrain iso-gradients for an autonomous roving vehicle is complicated by the measurement error inherent in the range data matrix. In this paper, the in-path and cross-path slopes at each data point in the multivariable range matrix are expressed in terms of parameters at that data point and those at its surrounding points. The sensitivity in the change of these slopes - due to the errors in measurements in range, elevation angle and azimuth angle are formulated. These sensitivities are used to determine the appropriate statistics of the gradient, which are then used to describe the terrain with a known probability of accuracy.

Shen, C. N.↗
NASA NTRS1990

Obtaining consistent models of helicopter flight-data measurement errors using kinematic-compatibility and state-reconstruction methods

A new method was developed for application of Kalman Filter/Smoothers to post-flight processing of helicopter flight test dynamic measurements. This processing includes checking for kinematic compatibility among the measurements, identification of a measurement error model, and reconstruction of both measured and unmeasured time histories. Emphasis is placed on identification of a parametric measurement error model which is valid for a set of flight test data. This is facilitated through a new method of concatenating several maneuver time histories. The method also includes a model structure determination step which ensures that a physically realistic parameterization has been achieved. Application of the method to a set of BO-105 flight test data is illustrated. The resulting minimally parameterized error model is shown to characterize the measurement errors of the entire data set with very little variation in the parameter values. Reconstructed time histories are shown to have increased bandwidths and signal to noise ratios.

Fletcher, Jay W.↗
DOE OSTI2022

Overview of Nuclear Data Measurement and Analysis at RPI [Slides]

This presentation discusses the experimental, simulation, and nuclear data methods that were validated for the RPI γ-Multiplicity Detector. When the neutron capture γ-cascade data is well-known, the γ-emission spectra can be accurately calculated using the modified simulation tools. The RPI γ-Multiplicity Detector system is now ready for analysis and recommendations for isotopes with deficiencies in γ-ray data. The presentation also discusses future work which includes developing a method for analyzing and adjusting nuclear data for 59 Co, 55 Mn and other measured isotopes including 181 Ta. Additionally, future work includes comparing experimental γ-emission spectra with MCNP-6.2/DICEBOX simulations for 238 U and 235 U. In summation, new capture and transmission measurements for 54 Fe will help improve resonance parameter evaluation. Neutron capture gamma cascade spectra and yields were measured in the resolved resonance region and compared to evaluations. In addition, the pulsed neutron die-away method was developed as a tool to provide data for validation of TSLs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1983

Distributed processing and fiber optic communications in air data measurements

The application of distributed processing, fiber optics, and hardware redundancy to collecting airstream data in Princeton's digitally controlled Variable-Response Research Aircraft (VRA) is described. Microprocessor controlled instrumentation packages in each wingtip of the aircraft collect angle of attack and sideslip data in digital form; after scaling, filtering, and calibrating the data, they send it to the aircraft's microprocessor Digital Flight Control System (micro-DFCS) via digital fiber optic data links. Each wingtip's package is independent of the other; therefore, the system has dual hardware redundancy. The fiber optic link design is presented as well as a description of the calibration and communications software.

Farry, K. A.↗
DOE OSTI2022

Modeling gas release from a Bingham plastic slurry and deconvoluting measured data

Physics-based models for predicting the off-gassing characteristics of agitated slurries are presented. This approach decomposes the system into two separate but coupled slurry and headspace models. The physics driving bubble transport through the slurry and gas mixing within the headspace are discussed. An analytical expression for predicting the time evolution of the headspace concentration using first principles theory is also presented. Predictions from the numerical models, as well as expectations from the analytical solution, both agree with measured off gassing data for two different experimental operating conditions. After benchmarking the numerical model predictions against experimental data, the model was used to make predictions for gas release from a full-scale vessel and to perform sensitivity analyses to examine the sensitivity of gas release to parameters such as yield stress, consistency index, slurry density, bubble size, bubble concentration, and impeller speed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2012

New Dielectric Measurement Data to Determine the Permittivity of Seawater at 1.4313 Hz

This paper describes the new measurements - made in 2010-2011 - of the dielectric constant of seawater at 1.413 GHz using a resonant cavity technique. The purpose of these measurements is to develop an accurate relationship concerning the dependence of the dielectric constant of seawater on temperature and salinity for use by the Aquarius inversion algorithm. Aquarius is a NASA/CONAE satellite mission launched in June of 2011 with the primary mission of measuring global sea surface salinity with a 1.413 GHz radiometer to an accuracy of 0.2 psu. A brass microwave cavity resonant at 1.413 GHz has been used to measure the dielectric constant of seawater. The seawater is introduced into the cavity through a capillary glass tube having an inner diameter of 0.1 mm. The change of resonant frequency and the cavity Q value are used to determine the real and imaginary parts of the dielectric constant of seawater. Measurements are automated with Visual Basic software developed at the George Washington University. In this paper, new results from measurements made since September 2010 will be presented for salinities of 30, 35 and 38 psu with a temperature range of 0 C to 35 C in intervals of 5 C. These measurements are more accurate than earlier measurements made in 2008. The new results will be compared to the Klein-Swift (KS) and Meissner-Wentz (MW) model functions. The importance of an accurate model function will be illustrated by using these model functions to invert the Aquarius brightness temperature to retrieve the salinity values. The salinity values will be compared to co-located in situ data collected by Argo buoys.

Lang, R.↗
NASA NTRS1986

Physical data measurements and mathematical modelling of simple gas bubble experiments in glass melts

In this work consideration is given to the problem of the extraction of physical data information from gas bubble dissolution and growth measurements. The discussion is limited to the analysis of the simplest experimental systems consisting of a single, one component gas bubble in a glassmelt. It is observed that if the glassmelt is highly under- (super-) saturated, then surface tension effects may be ignored, simplifying the task of extracting gas diffusivity values from the measurements. If, in addition, the bubble rise velocity is very small (or very large) the ease of obtaining physical property data is enhanced. Illustrations are given for typical cases.

Weinberg, Michael C.↗
DOE OSTI2023

Methodology for physics-informed generation of synthetic neutron time-of-flight measurement data

Accurate neutron cross section data are a vital input to the simulation of nuclear systems for a wide range of applications from energy production to national security. The evaluation of experimental data is a key step in producing accurate cross sections. There is a widely recognized lack of reproducibility in the evaluation process due to its artisanal nature and therefore there is a call for improvement within the nuclear data community. This can be realized by automating/standardizing viable parts of the process, namely, parameter estimation by fitting theoretical models to experimental data. This automation effort could greatly benefit from a synthetic data resource. This work leverages problem-specific physics, Monte Carlo sampling, and a general methodology for data synthesis to generate unlimited, labelled experimental cross-section data that is statistically indistinguishable to the observed data. Heuristic and, where applicable, rigorous statistical comparisons to observed data support this claim. The demonstration is based on/limited to transmission measurements at Rensselaer Polytechnic Institute (RPI) and energy-differential cross sections in the resolved resonance region (RRR). An open-source software is published alongside this article that executes the complete methodology to produce high-utility synthetic datasets. The goal of this work is to provide an approach and corresponding tool that will allow the evaluation community to begin exploring more data-driven, ML-based solutions to long-standing challenges in the field.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1982

A portable, low-cost flight-data measurement and recording system

The design of and the experience with an inexpensive, hand-portable, onboard data system used to record four parameters in the final portion of the landing approach and touchdown of an airplane are described. The system utilized a high-quality audio tape recorder and amateur photographic equipment with accessory circuitry rather than specialized instrumentation to given satisfactory results.

Miller, R. J.↗
NASA NTRS1982

Distributed processing and fiber optic communications in air data measurement

This paper describes the application of distributed processing, fiber optics, and hardware redundancy to collecting airstream data in Princeton's digitally controlled Variable-Response Research Aircraft (VRA). Microprocessor-controlled instrumentation packages in each wingtip of the aircraft collect angle-of-attack and sideslip data in digital form; after scaling, filtering, and calibrating the data, they send it to the aircraft's microprocessor Digital Flight Control System (micro-DFCS) via digital fiber optic data links. Each wingtip's package is independent of the other; therefore, the system has dual hardware redundancy. The fiber optic link design is presented as well as a description of the calibration and communications software. Translation of the system's dual redundancy into fault tolerance is also covered. Results of preliminary flight tests are included.

Farry, K. A.↗
DOE OSTI2021

A Novel Machine Learning Algorithm for Planetary Boundary Layer Height Estimation Using AERI Measurement Data

Accurately determining the height of the planetary boundary layer (PBL) is important since it can affect the climate, weather, and air quality. Ground-based infrared hyperspectral remote sensing is an effective way to obtain this parameter. Compared with radiosonde measurements, its temporal resolution is much higher. In this study, a method to retrieve the PBL height (PBLH) from the ground-based infrared hyperspectral radiance data is proposed based on machine learning. In this method, the channels that are sensitive to temperature and humidity profiles are selected as the feature vectors, and the PBLHs derived from radiosonde are taken as the true values. The support vector machine (SVM) is applied to train and test the data set, and the parameters are optimized in the process. The data set collected at the Atmospheric Radiation Measurement (ARM) program Southern Great Plains (SGP) from 2012 to 2015 is analyzed. The instruments used in this letter include Atmospheric Emitted Radiance Interferometer (AERI), Vaisala CL31 ceilometer, and radiosonde. It shows that the root mean square error (RMSE) between the PBLHs calculated by the proposed method using AERI data and those from radiosonde data can be within 370 m, and the square correlation coefficient (SCC) is greater than 0.7. Compared with the PBLHs derived from the ceilometer, it can be found that the new method is more stable and less affected by clouds.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1977

Diffusion coefficients estimated from turbulence data measured by the Metrac positioning system in Minneapolis field test

An analysis is presented of the tropospheric turbulence data obtained by the Metrac positioning system, a radio location system which employs the Doppler principle to track inexpensive expendable balloon-borne transmitters. A Minneapolis field test of the Metrac system provided one-second samples of transmitter frequency from balloons tracked by four ground stations for more than an hour. The derivation of diffusion coefficients from the turbulence data was conducted by two methods, yielding highly consistent results.

Gage, K. S.↗
NASA NTRS1991

Case Studies of Water Vapor and Surface Liquid Water from AVIRIS Data Measured Over Denver, CO and Death Valley, CA

High spatial resolution column atmospheric water vapor amounts and equivalent liquid water thicknesses of surface targets are retrieved from spectral data collected by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). The retrievals are made using a nonlinear least squares curve fitting technique. Two case studies from AVIRIS data acquired over Denver-Platteville area, Colorado and over Death Valley, California are presented. The column water vapor values derived from AVIRIS data over the Denver-Platteville area are compared with those obtained from radiosondes, ground level upward-looking microwave radiometers, and geostationary satellite measurements. The column water vapor image shows spatial variation patterns related to the passage of a weather front system. The column water vapor amounts derived from AVIRIS data over Death Valley decrease with increasing surface elevation. The derived liquid water image clearly shows surface drainage patterns.

Gao, B.-C.↗
NASA NTRS2010

2009 Goose Bay Experiment Ocean Measurements: Data - Part 1

During late February and early March 2009, a field experiment was performed using the NASA P3 over the Labrador Sea. During this experiment, expendable probes deployed from the aircraft acquired ocean mixed layer temperature, salinity and currents Probes were deployed during three flights of the four. Overall 7 AXBTs, 15 AXCTDs and 7 AXCPs were deployed with a success rate of nearly 70%. This is much lower than expected based on prior experience deploying from other aircraft. But given the difficulties associated with the Pneumatic Sonobuoy Launch Tube mechanism on the NASA P3, this rate likely can be improved significantly by using a different deployment mechanism. Additionally, two sets of collocated measurements of AXBTs, AXCPs and AXCTDs were made to verify the drop rates and measurements of the old AXBTs. While there were differences in the measurements, the old AXCTDs are performing well. The expendable data from the experiment are compared to the Argo profiles in the region to check for consistency. Comparisons indicate all the expendable probes acquired useful data and are well within the range of values measured by Argo floats.

Jacob, S. Daniel↗