Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mantle fluids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Venus' Free Obliquity

The predicted orientation of Venus' rotation axis relative to its orbit ran be uniquely determined given knowledge of its J2 gravity coefficient and polar moment of inertia C if its free obliquity is fully damped. This assumption seems warranted given the dominant damping mechanism: turbulent fluid friction at a core mantle boundary (CMB). This skin friction results from differential obliquity of mantle and core spin axes, and the associated damping rate could be as short as 1/10(exp 6) year. However, the observed pole orientation indicates a free obliquity amplitude epsilon approx. = 2.1 deg compared with a nominal forced amplitude of 0.5 deg. There are two plausible explanations. The most likely is that the observed obliquity is a tidally evolved end state in which core friction, modulated by CMB ellipticity and core obliquity amplitude, counterbalances solid and atmospheric tidal torques. This concept is similar to the explanation for the retrograde spin omega as an end state in which solid and atmospheric thermal tidal torques balance at the present spin rate because of the omega(sup -1) dependence of the axial thermal torque. Weaker effects such as solid and thermal tides can then compete with core friction and for plausible models, their sum tends to increase free obliquity. The obliquity balance is controlled by the nonlinear (and nearly quadratic) dependence of the CMB turbulent "skin friction" torque on obliquity.Core ellipticity also has a profound effect on tidal evolution of Venus obliquity.

Yoder, Charles F.↗

Venus' Free Obliquity

The predicted orientation of Venus' rotation axis relative to its orbit can be uniquely determined given knowledge of its J2 gravity coefficient and polar moment of inertia C if its free obliquity is fully damped. This assumption seems warranted given the dominant damping mechanism: turbulent fluid friction at a core mantle boundary. The determination of the free obliquity is examined.

Venus↗

The free librations of a dissipative moon

It is noted that dissipation in the moon produces a small offset (approximately 0.23 arcsec) of the moon's rotation axis from the plane defined by the ecliptic and lunar orbit normals. Both solid body tidal friction and viscous fluid friction at a core-mantle interface are thought to be plausible mechanisms. The merits of both are discussed, and it is found that solid friction requires a low lunar tidal Q (approximately 28), whereas turbulent fluid friction requires a core with a radius of approximately 330 km to cause the signature observed by lunar laser ranging. Large (approximately 0.4-8.0 arcsec) free librations of the lunar figure have also been detected through laser ranging. Both a very recent impact on the moon and fluid turbulence in the lunar core are considered plausible mechanisms for generating these librations.

Yoder, C. F.↗

Models of the earth's core

Combined inferences from seismology, high-pressure experiment and theory, geomagnetism, fluid dynamics, and current views of terrestrial planetary evolution lead to models of the earth's core with five basic properties. These are that core formation was contemporaneous with earth accretion; the core is not in chemical equilibrium with the mantle; the outer core is a fluid iron alloy containing significant quantities of lighter elements and is probably almost adiabatic and compositionally uniform; the more iron-rich inner solid core is a consequence of partial freezing of the outer core, and the energy release from this process sustains the earth's magnetic field; and the thermodynamic properties of the core are well constrained by the application of liquid-state theory to seismic and labroatory data.

Stevenson, D. J.↗

Lunar Core and Tides

Variations in rotation and orientation of the Moon are sensitive to solid-body tidal dissipation, dissipation due to relative motion at the fluid-core/solid-mantle boundary, and tidal Love number k2 [1,2]. There is weaker sensitivity to flattening of the core-mantle boundary (CMB) [2,3,4] and fluid core moment of inertia [1]. Accurate Lunar Laser Ranging (LLR) measurements of the distance from observatories on the Earth to four retroreflector arrays on the Moon are sensitive to lunar rotation and orientation variations and tidal displacements. Past solutions using the LLR data have given results for dissipation due to solid-body tides and fluid core [1] plus Love number [1-5]. Detection of CMB flattening, which in the past has been marginal but improving [3,4,5], now seems significant. Direct detection of the core moment has not yet been achieved.

Williams, J. G.↗

Density Anomalies in the Mantle and the Gravitational Core-Mantle Interaction

Seismic studies suggest that the bulk of the mantle is heterogeneous, with density variations in depth as well as in horizontal directions (latitude and longitude). This density variation produces a three- dimensional gravity field throughout the Earth. On the other hand, the core density also varies in both time and space, due to convective core flow. Consequently, the fluid outer core and the solid mantle interact gravitationally due to the mass anomalies in both regions. This gravitational core-mantle interaction could play a significant role in exchange of angular momentum between the core and the mantle, and thus the change in Earth's rotation on time scales of decades and longer. Aiming at estimating the significance of the gravitational core-mantle interaction on Earth's rotation variation, we introduce in our MoSST core dynamics model a heterogeneous mantle, with a density distribution derived from seismic results. In this model, the core convection is driven by the buoyancy forces. And the density variation is determined dynamically with the convection. Numerical simulation is carried out with different parameter values, intending to extrapolate numerical results for geophysical implications.

Kuang, Weijia↗

The earth's C21 and S21 gravity coefficients and the rotation of the core

Observational results for the earth's C21 and S21 gravity coefficients can be used to constrain the mean equatorial rotation of the core with respect to the mantle. Current satellite gravity solutions suggest the equatorial rotation rate is no larger than 1 x 10 to the -7th times the earth's diurnal spin rate, a limit more than one order of magnitude smaller than the polar rotation rate inferred from the westward drift of the earth's magnetic field. The next generation gravity solutions should improve this constraint by more than one order of magnitude. Implications for the fluid pressure at the core-mantle boundary and for the shape of that boundary are discussed.

Wahr, John M.↗

Hotspots, basalts, and the evolution of the mantle

It is noted that the trace element concentration patterns of continental and ocean island basalts and of mid-ocean ridge basalts are complementary. Estimates of the relative sizes of the source regions for these fundamentally different basalt types can be arrived at from the trace element enrichment-depletion patterns. Their combined volume occupies the greater part of the mantle above the 670 km discontinuity. It is pointed out that the source regions separated as a result of early mantle differentiation and crystal fractionation from the resulting melt. The mid-ocean ridge basalts source evolved from an eclogite cumulate that gave up its late-stage enriched fluids at various times to the shallower mantle and continental crust. The mid-ocean ridge basalts source is rich in garnet and clinopyroxene, while the continental and ocean island basalt source is a garnet peridotite that has experienced secondary enrichment. These relationships are found to be consistent with the evolution of a terrestrial magma ocean.

Anderson, D. L.↗

Subduction of hydrated basalt of the oceanic crust: Implications for recycling of water into the upper mantle and continental growth

Subduction zones are presently the dominant sites on Earth for recycling and mass transfer between the crust and mantle; they feed hydrated basaltic oceanic crust into the upper mantle, where dehydration reactions release aqueous fluids and/or hydrous melts. The loci for fluid and/or melt generation will be determined by the intersection of dehydration reaction boundaries of primary hydrous minerals within the subducted lithosphere with slab geotherms. For metabasalt of the oceanic crust, amphibole is the dominant hydrous mineral. The dehydration melting solidus, vapor-absent melting phase relationships; and amphibole-out phase boundary for a number of natural metabasalts have been determined experimentally, and the pressure-temperature conditions of each of these appear to be dependent on bulk composition. Whether or not the dehydration of amphibole is a fluid-generating or partial melting reaction depends on a number of factors specific to a given subduction zone, such as age and thickness of the subducting oceanic lithosphere, the rate of convergence, and the maturity of the subduction zone. In general, subduction of young, hot oceanic lithosphere will result in partial melting of metabasalt of the oceanic crust within the garnet stability field; these melts are characteristically high-Al2O3 trondhjemites, tonalites and dacites. The presence of residual garnet during partial melting imparts a distinctive trace element signature (e.g., high La/Yb, high Sr/Y and Cr/Y combined with low Cr and Y contents relative to demonstrably mantle-derived arc magmas). Water in eclogitized, subducted basalt of the oceanic crust is therefore strongly partitioned into melts generated below about 3.5 GPa in 'hot' subduction zones. Although phase equilibria experiments relevant to 'cold' subduction of hydrated natural basalts are underway in a number of high-pressure laboratories, little is known with respect to the stability of more exotic hydrous minerals (e.g., ellenbergite) and the potential for oceanic crust (including metasediments) to transport water deeper into the mantle.

Rapp, R. P.↗

Time-dependent models of single- and double-layer mantle convection

Time-dependent numerical models of two-dimensional convection which simulate mantle convection are presented. Starting from a fluid initially at rest with a purely conductive temperature profile, it is found that for a Rayleigh number of ten million, the model experiences a transient period of double-layer convection which lasts on the order of hundreds of millions of years when scaled to the earth's mantle. It is suggested that transient periods of double-layer convection in the earth's mantle may have existed in the past, whether or not such a period exists today.

Boss, A. P.↗

Dynamically supported geoid highs over hotspots: Observation and theory

Hotspots are associated with long wavelength geoid highs, an association that is even stronger when the geoid highs associated with subduction zones are removed. These associations are quantified by expanding the hotspot distribution in spherical harmonics and calculating correlation coefficients as a function of harmonic degree. The hotspot distribution spectrum is essentially white, with peaks at degrees 2 and 6. It is correlated positively with the slab residual geoid for degrees 2 to 6, with low seismic velocity in the lower mantle at degree 2, and with low seismic velocity in the upper mantle at degree 6. A variety of fluid mechanical models were tested for hotspots, including lithospheric delamination and hot plumes, by calculating their predicted dynamic geoid responses and comparing them to the observations. These models include the effects of temperature dependent rheology. The preferred hotspot model, based on observations of the geoid and seismic tomography, has plumes preferentially occurring in regions of large scale background temperature highs in a mantle with substantial viscosity increase with depth, although other models are possible.

Richards, M. A.↗

Dynamically supported geoid highs over hotspots - Observation and theory

Hotspots are associated with long wavelength geoid highs, an association that is even stronger when the geoid highs associated with subduction zones are removed. These associations are quantified by expanding the hotspot distribution in spherical harmonics and calculating correlation coefficients as a function of harmonic degree. The hotspot distribution spectrum is essentially white, with peaks at degrees 2 and 6. It is correlated positively with the slab residual geoid for degrees 2 to 6, with low seismic velocity in the lower mantle at degree 2, and with low seismic velocity in the upper mantle at degree 6. A variety of fluid mechanical models were tested for hotspots, including lithospheric delamination and hot plumes, by calculating their predicted dynamic geoid responses and comparing them to the observations. These models include the effects of temperature dependent rheology. The preferred hotspot model, based on observations of the geoid and seismic tomography, has plumes preferentially occurring in regions of large scale background temperature highs in a mantle with substantial viscosity increase with depth, although other models are possible.

Richards, Mark A.↗

The dynamical regime of fluid flow at the core surface

An alternative method for determining the fluid motion immediately beneath the core-mantle boundary is presented which is based on solving the full nonlinear core motions problem. This method is used to examine three dynamical hypotheses about the flow: (1) the steady motions hypothesis; (2) the geostrophic hypothesis; and (3) the toroidal flow hypothesis. Better fits to the field are obtained with the toroidal flows than with geostrophic flows, casting considerable doubt on the validity of the geostrophic hypothesis. Additionally, some indication is found that failure of the frozen-flux approximation, a concomitant assumption, may be a serious obstacle to obtaining reliable maps of the core fluid flow.

Bloxham, Jeremy↗

Steady flows at the top of earth's core derived from geomagnetic field models

Select models of the main geomagnetic field and its secular variation are extrapolated to the base of an insulating mantle and used to estimate the adjacent fluid motion of a perfectly conducting outer core. The assumption of steady motion provides formally unique solutions and is tested along with that of no upwelling. The hypothesis of no upwelling is found to be substantially worse than that of steady motion. Although the actual motion is not thought to be steady, the large-scale secular variation at the top of the core can be adequately described by a large-scale, combined toroidal-poloidal circulation which is steady for intervals of at least a decade or two. The derived flows include a bulk westward drift but are complicated by superimposed jets, gyres, and surface divergence indicative of vigorous vertical motion at depth. The circulation pattern and key global properties including rms speed, upwelling, and westward drift are found to be fairly insensitive to variations in modeling parameters.

Voorhies, Coerte V.↗

Transition to hard turbulence in thermal convection at infinite Prandtl number

Direct numerical simulations of two-dimensional high Rayleigh (Ra) number, base-heated thermal convection in large aspect-ratio boxes are presented for infinite Prandtl number fluids, as applied to the earth's mantle. A transition is characaterized in the flow structures in the neighborhood of Ra between 10 to the 7th and 10 to the 8th. These high Ra flows consist of large-scale cells with strong intermittent, boundary-layer instabilities. For Ra exceeding 10 to the 7th it is found that the heat-transfer mechanism changes from one characterized by mushroom-like plumes to one consisting of disconnected ascending instabilities, which do not carry with them all the thermal anomaly from the bottom boundary layer. Plume-plume collisions become much more prominent in high Ra situations and have a tendency of generating a pulse-like behavior in the fixed plume. This type of instability represents a distinct mode of heat transfer in the hard turbulent regime. Predictions of this model can be used to address certain issues concerning the mode of time-dependent convection in the earth's mantle.

Hansen, Ulrich↗

Interannual and decade fluctuations in the earth's rotation

The main findings of a study of earth rotation changes on the longer interannual and decade range of time scales are summarized. The earth rotation data provide important constraints on models of the internal structure and dynamics of the core and lower mantle. Torques at the core-mantle interface are due to time varying fluid motions in the core. A torque of about 0.2 Hadley units is found in the axial component during the 1980 period.

Dickey, Jean O.↗

Three-dimensional convection of an infinite-Prandtl-number compressible fluid in a basally heated spherical shell

A numerical investigation is conducted of the effect of compressibility on 3D thermal convection in a basally heated highly viscous fluid spherical shell (representing the earth's mantle). It was found that compressibility has little effect on the spatial structure of steady convection when the superadiabatic temperature drop across the shell, Delta T(sa), is comparable to a characteristic adiabatic temperature. When the Delta T(sa) is about an order of magnitude smaller than the adiabatic temperature, compressibility effect is significant. It is shown that compressibility affects the pattern evolution of the irregular solutions; fewer upwelling plumes are produced with increasing compressibility.

Bercovici, David↗