Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “low intensity fire”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Horizontal variability of the marine boundary layer structure upwind of San Nicolas Island during FIRE, 1987

During the months of June and July 1987, the Marine Stratocumulus Intensive Field Observation Experiment of First ISCCP Regional Experiment (FIRE) was conducted in the Southern California offshore area in the vicinity of San Nicolas Island (SNI). The Naval Ocean Systems Center (NOSC) airborne platform was utilized during FIRE to investigate the upwind low level horizontal variability of the marine boundary layer structure to determine the representativeness of SNI-based measurements to upwind open ocean conditions. The NOSC airborne meteorological platform made three flights during FIRE, two during clear sky conditions (19 and 23 July), and one during two stratus conditions (15 July). The boundary layer structure variations associated with the stratus clouds of 15 July 1987 are discussed. Profiles of air temperature (AT) and relative humidity (RH) taken 'at' and 'upwind' of SNI do show differences between the so-called open ocean conditions and those taken near the island. However, the observed difference cannot be uniquely identified to island effects, especially since the upwind fluctuations of AT and RH bound the SNI measurements. Total optical depths measures at SNI do not appear to be greatly affected by any surface based aerosol effects created by the island and could therefore realistically represent open ocean conditions. However, if one were to use the SNI aerosol measurements to predict ship to ship EO propagation conditions, significant errors could be introduced due to the increased number of surface aerosols observed near SNI which may not be, and were not, characteristic of open ocean conditions. Sea surface temperature measurements taken at the island will not, in general, represent those upwind open ocean conditions. Also, since CTT's varied appreciably along the upwind radials, measurements of CTT over the island may not be representative of actual open ocean CTT's.

Jensen, Douglas R.↗
DOE OSTI2023

Land-use history, fire regime, and large-mammal herbivory affect deer-preferred plant diversity in longleaf pine woodlands

Since ecological systems often experience multiple disturbances, understanding changes in important ecological interactions, such as plant-herbivore interactions, may require studies capable of disentangling the unique and interactive effects of multiple forms of disturbance. For example, understanding how mammalian herbivores affect plant communities may require understanding how widespread past disturbances, such as agricultural land use, interact with contemporary disturbances, such as prescribed fire. Here, we tested if past agricultural land use and contemporary fire regime modified the effects of mammalian herbivory on focal plant communities by measuring the richness of plant species preferred by deer at 26 longleaf pine woodlands containing paired open and large-mammal exclusion plots. Land-use history significantly affected the community composition of deer-preferred species, and focal species were 8.19 times more likely to be present in post-agricultural sites than non-agricultural sites. Large-mammal herbivory only affected plant species richness in woodlands with low fire frequencies wherein focal species were on average 2.23 times more likely to be present in exclusion plots than open plots. These results suggest that past and present disturbances can mediate contemporary plant-animal interactions and may explain spatial patterns in the intensity of large-mammal herbivory. Our findings also suggest that common management practices, such as use of prescribed burns, may indirectly promote plant species richness by reducing deer herbivory.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1982

Edge attachment study for fire-resistant canopies

Twenty-two resin systems were evaluated in laminate form for possible use as edge attachment material for fire-resistant canopies. The evaluation uncovered an unexpected development when the laminates were subjected to an intense flame: (1) the high-heat-resistant materials could withstand the flame test quite well, but experienced rapid heat transfer through the test specimen; (2) the laminates which exhibited a low rate of heat transfer were materials which lost strength rapidly in the presence of the flame by decomposition, delamination, and blistering.

Wintermute, G. E.↗
NASA NTRS1986

Phenol-formaldehyde intumescent coating composition and coating prepared therefrom

Intumescent coatings which form a thick, uniform, fine celled, low density foam upon exposure to a high intensity heat flux or flame are disclosed, the invention coatings comprise phenolic resin prepolymer containing a blowing agent and a nucleating agent; in the preferred embodiments the coatings also contains a silicone surfactant, the coatings are useful in thermal and fire protection systems.

Salyer, Ival O.↗
NASA NTRS2018

Seasonal and Interannual Assessment of Cloud Cover and Atmospheric Constituents Across the Amazon (2000 - 2015): Insights for Remote Sensing and Climate Analysis

The quantitative assessment of cloud cover and atmospheric constituents improves our ability to exploit the climate feedback into the Amazon basin. In the 21st century, three droughts have already occurred in the Amazonia (e.g. 2005, 2010, 2015), inducing regional changes in the seasonal patterns of atmospheric constituents. In addition to climate, the atmospheric dynamic and attenuation properties are long-term challenges for satellite-based remote sensing of this ecosystem: high cloudiness, abundant water vapor content and biomass burning season. Therefore, while climatology analysis supports the understanding of atmospheric variability and trends, it also offers valuable insights for remote sensing applications. In this study, we evaluate the seasonal and interannual variability of cloud cover and atmospheric constituents (aerosol loading, water vapor and ozone content) over the Amazon basin, with focus on both climate analysis and remote sensing implications. We take the advantage of new atmosphere daily products at 1 km resolution derived from Multi-Angle Implementation for Atmospheric Correction (MAIAC) algorithm developed for Moderate Resolution Imaging Spectroradiometer (MODIS) data. An intercomparison of Aerosol Robotic Network (AERONET) and MAIAC aerosol optical depth (AOD) and columnar water vapor (CWV) showed quantitative information with a correlation coefficient higher than 0.81. Our results show distinct regional patterns of cloud cover across the Amazon basin: northwestern region presets a persistent cloud cover (> 80%) throughout the year, while low cloud cover (0-20%) occurs in the southern Amazon during the dry season. The cloud-free period in the southern Amazon is followed by an increase in the atmospheric burden due to fire emissions. Our results reveal that AOD records are changing in terms of area and intensity. During the 2005 and 2010 droughts, the positive AOD anomalies (δ > 0.1) occurred over 39.03% (240.3 million ha) and 27.14% (165.99 million ha) of total basin in the SON season, respectively. In contrast, the recent 2015 drought occurred towards the end of year (October through December) and these anomalies were observed over 23.72% (145 million ha) affecting areas in the central and eastern Amazon unlike previous droughts. The water vapor presents high concentration values (4.0-5.0 g/sq.cm) in the wet season (DJF), while we observed a strong spatial gradient from northwestern to southeastern of the basin during the dry season. In addition, we also found a positive trend of water vapor content ( ∼0.3 g/sq.cm) between 2000 and 2015. The total ozone typically varies between 220 and 270 DU, and it has a seasonal change of ∼25-35 DU from wet season to dry season caused by large emissions of ozone precursors and long-range transport. Finally, while this study contributes to climatological analysis of atmospheric constituents, the remote sensing users can also understand the regional constraints caused by atmospheric attenuation, such as high aerosol loading and cloud obstacles for surface observations.

ozone↗
NASA NTRS2019

Biomass-Burning Smoke Heights over the Amazon Observed from Space

We characterise the vertical distribution of biomass-burning emissions across the Amazon during the biomass-burning season (July–November) with an extensive climatology of smoke plumes derived from MISR and MODIS (2005–2012) and CALIOP (2006–2012) observations. Smoke plume heights exhibit substantial variability, spanning a few hundred metres up to 6 km above the terrain. However, the majority of the smoke is located at altitudes below 2.5 km. About 60 % of smoke plumes are observed in drought years, 40 %–50 % at the peak month of the burning season (September) and 94 % over tropical forest and savanna regions, with respect to the total number of smoke plume observations. At the time of the MISR observations (10:00–11:00 LT), the highest plumes are detected over grassland fires (with an averaged maximum plume height of ∼1100 m) and the lowest plumes occur over tropical forest fires (∼800 m). A similar pattern is found later in the day (14:00–15:00 LT) with CALIOP, although at higher altitudes (2300 m grassland vs. 2000 m tropical forest), as CALIOP typically detects smoke at higher altitudes due to its later overpass time, associated with a deeper planetary boundary layer, possibly more energetic fires, and greater sensitivity to thin aerosol layers. On average, 3 %–20 % of the fires inject smoke into the free troposphere; this percentage tends to increase toward the end of the burning season (November: 15 %–40 %). We find a well-defined seasonal cycle between MISR plume heights, MODIS fire radiative power and atmospheric stability across the main biomes of the Amazon, with higher smoke plumes, more intense fires and reduced atmospheric stability conditions toward the end of the burning season. Lower smoke plume heights are detected during drought (800 m) compared to non-drought (1100 m) conditions, in particular over tropical forest and savanna fires. Drought conditions favour understory fires over tropical forest, which tend to produce smouldering combustion and low smoke injection heights. Droughts also seem to favour deeper boundary layers and the percentage of smoke plumes that reach the free troposphere is lower during these dry conditions. Consistent with previous studies, the MISR mid-visible aerosol optical depth demonstrates that smoke makes a significant contribution to the total aerosol loading over the Amazon, which in combination with lower injection heights in drought periods has important implications for air quality. This work highlights the importance of biome type, fire properties and atmospheric and drought conditions for plume dynamics and smoke loading. In addition, our study demonstrates the value of combining observations of MISR and CALIOP constraints on the vertical distribution of smoke from biomass burning over the Amazon.

Gonzalez-Alonso, Laura↗
DOE OSTI2024

Heating effects on pyrogenic organic matter mass loss and temperature in a sand matrix in a lab setting from 2022

This dataset contains data associated with the preprint “A laboratory method for simulating the effects of subsequent fires on pyrogenic organic matter at different exposure depths in a sand matrix” (https://doi.org/10.1101/2024.07.30.605814), which has been accepted for publication in the International Journal of Wildland Fire. The dataset was generated to investigate the effects of subsequent fires on preexisting pyrogenic organic matter (PyOM) at different soil depths. Specifically, we designed a laboratory method to simulate soil heating from above, applying realistic heat flux profiles (High, Low, Control) derived from jack pine (Pinus banksiana Lamb.) log burns. Using a cone calorimeter, these profiles were applied to buried jack pine PyOM (produced at 350°C) in a sand matrix pyrocosm to examine PyOM mass loss at different depths (surface, 1 cm, 5 cm). Each treatment (e.g., High heat flux at 1 cm depth) was applied once to five replicates in a pyrocosm.The dataset includes mass loss fraction of PyOM and time-series temperature profiles (measured with type K thermocouples). Additionally, calibration datasets for high and low heat flux profiles are provided, including programmed heat flux profile data and three sets of calibration results. All datasets are in .csv format and were analyzed in R using code found at https://github.com/MengmengLuo/Reburning-pyrogenic-organic-matter-A-laboratory-method-for-dosing-dynamic-heat-fluxes-from-above. This dataset supports research on PyOM transformations during subsequent fires, and methodological advancements in simulating soil heating. It can be used to explore fire-induced PyOM alterations across different fire intensities and soil depths.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Intense formation of secondary ultrafine particles from Amazonian vegetation fires and their invigoration of deep clouds and precipitation

New particle formation (NPF) in fire smoke is thought to be unlikely due to large condensation and coagulation sinks that scavenge molecular clusters. We analyze aircraft measurements over the Amazon and find that fires significantly enhance NPF and ultrafine particle (UFP < 50 nm diameter) numbers compared to background conditions, contrary to previous understanding. We identify that the nucleation of dimethylamine with sulfuric acid, which is aided by the formation of extremely low volatility organics in biomass-burning smoke, can overcome the large condensation and coagulation sinks and explain aircraft observations. We show that freshly formed clusters rapidly grow to UFP sizes through biomass-burning secondary organic aerosol formation, leading to a 10-fold increase in UFP number concentrations. Here, we find a contrasting effect of UFPs on deep convective clouds compared to the larger particles from primary emissions for the case investigated here. UFPs intensify the deep convective clouds and precipitation due to increased condensational heating, while larger particles delay and reduce precipitation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

A Comparison of Stratospheric Smoke Events Seen by SAGE II (1984-2005) and SAGE III (2017-2021)

The ongoing Stratospheric Aerosol and Gas Experiment aboard the International Space Station (SAGE III/ISS) has mostly occurred during a period of relatively low aerosol loading. At the same time, it has almost observed a number of small to moderate injections of volcanic material in the stratosphere from the Aoba/Ambae eruption of 2018 to that of Karymsky in 2022. In addition, two of the largest known smoke intrusions into the stratosphere have occurred during the SAGE III/ISS mission (the British Columbia fire of August 2017 and the Australian Wildfire Event of 2019/2020). At least two other much smaller smoke events have also been observed in the SAGE III data (California Creek in September 2020 and McKay Creek in June 2021). Particularly with the two large events, it is tempting to speculate that these events are increasing in intensity and frequency possibly due to ongoing climate change. Realistically, change is difficult to assess since instrument data sets that can be used for quantifying historical events can be quite different in what and where they provide measurements. This complicates comparing one event to another potentially separated by many years. An exception to this issues are the measurements by SAGE III/ISS and those of its predecessor SAGE II (1984-2005). Both use the same measurement strategy, measure aerosol extinction coefficient at 1020 nm, and have similar spatial/temporal coverage. Both instruments are known to observe smoke events in the stratosphere. However, both have the same low observation density characteristic of solar occultation such that near-global coverage takes almost a month and characterizing effectively instant events like smoke and volcanic events take a matter of weeks depending on the vagaries of where the observations are being made at a critical juncture unlike instruments with high temporal/spatial resolution like limb-scatter instruments such as OMPS and OSIRIS. The goal of this work will be to use the same analysis approach to both the SAGE II and SAGE III data and compare both the frequency and intensity of smoke events observed by these instruments. While we do not expect to be able to make conclusions about change between the periods, the analysis is a first step in interpreting changes in the contribution of smoke to the stratospheric aerosol budget between the time frames encompassed by these instruments.

L. W. Thomason↗
NASA NTRS2001

Flame Propagation in Low-Intensity Turbulence under Microgravity Conditions

The goal of the research is to understand the influences of the hydrodynamic instability on premixed-flame propagation. It is known that coupling between flame and flow-field dynamics in association with the hydrodynamic instability may lead to flame-generated turbulence, flame acceleration and enhancement of burning rates. As a result of such hydrodynamic coupling the transition from initially planar or wrinkled laminar flames to fast turbulent flames or detonations is possible, even when diffusive-thermal effects associated with non-unity reactant Lewis numbers are not destabilizing. It is important to identify methods of suppressing the hydrodynamic instability so as to insure fire safety, particularly in space.

Aldredge, R. C.↗
NASA NTRS2014

Sport Transition of JPSS VIIRS Imagery for Night-time Applications

The NASA/Short‐term Prediction, Research, and Transition (SPoRT) Program and NOAA/Cooperative Institute for Research in the Atmosphere (CIRA) work within the NOAA/Joint Polar Satellite System (JPSS) Proving Ground to demonstrate the unique capabilities of the VIIRS instrument. Very similar to MODIS, the VIIRS instrument provides many high‐resolution visible and infrared channels in a broad spectrum. In addition, VIIRS is equipped with a low‐light sensor that is able to detect light emissions from the land and atmosphere as well as reflected sunlight by the lunar surface. This band is referred to as the Day‐Night Band due to the sunlight being used at night to see cloud and topographic features just as one would typically see in day‐time visible imagery. NWS forecast offices that collaborate with SPoRT and CIRA have utilized MODIS imagery in operations, but have longed for more frequent passes of polar‐orbiting data. The VIIRS instrument enhances SPoRT collaborations with WFOs by providing another day and night‐time pass, and at times two additional passes due to its large swath width. This means that multi‐spectral, RGB imagery composites are more readily available to prepare users for their use in GOES‐R era and high‐resolution imagery for use in high‐latitudes is more frequently able to supplement standard GOES imagery within the SPoRT Hybrid GEO‐LEO product. The transition of VIIRS also introduces the new Day‐Night Band capability to forecast operations. An Intensive Evaluation Period (IEP) was conducted in Summer 2013 with a group of "Front Range" NWS offices related to VIIRS night‐time imagery. VIIRS single‐channel imagery is able to better analyze the specific location of fire hotspots and other land features, as well as provide a more true measurement of various cloud and aerosol properties than geostationary measurements, especially at night. Viewed within the SPoRT Hybrid imagery, the VIIRS data allows forecasters to better interpret the more frequent, but coarse GOES Imagery. Night‐time Microphysics and Dust RGB Imagery provides cloud analysis of cloud height, thickness, and composition in order for operational applications such as separating fog from low clouds, dust plume detection, and determining precipitating clouds in radar-void/ blocked regions. The Day‐Night Band has a particular benefit to seeing light from cities, fires, or other emissions as well as the reflection of moonlight off of clouds and smoke plumes, given the right lunar phase and angle. Examples from the VIIRS transition and IEP will be presented.

Fuell, Kevin↗
NASA NTRS2011

NASA A-Train and Terra Observations of the 2010 Russian Wildfires

Wildfires raged throughout western Russia and parts of Eastern Europe during a persistent heat wave in the summer of 2010. Anomalously high surface temperatures (35 - 41 C) and low relative humidity (9 - 25 %) from mid- June to mid-August 2010 shown by analysis of radiosonde data from multiple sites in western Russia were ideal conditions for the wildfires to thrive. Measurements of outgoing longwave radiation (OLR) from the Atmospheric Infrared Sounder (AIRS) over western Russian indicate persistent subsidence during the heat wave. Daily three-day back-trajectories initiated over Moscow reveal a persistent anticyclonic circulation for 18 days in August, coincident with the most intense period of fire activity observed by Moderate Resolution Imaging Spectroradiometer (MODIS). This unfortunate meteorological coincidence allowed transport of polluted air from the region of intense fires to Moscow and the surrounding area. We demonstrate that the 2010 Russian wildfires are unique in the record of observations obtained by remote-sensing instruments on-board NASA satellites: Aura and Aqua (part of the A-Train Constellation) and Terra. Analysis of the distribution of MODIS fire products and aerosol optical thickness (AOT), UV aerosol index (AI) and single-scattering albedo (SSA) from Aura's Ozone Monitoring Instrument (OMI), and total column carbon monoxide (CO) from Aqua s Atmospheric Infrared Sounder (AIRS) show that the region in the center of western Russia surrounding Moscow (52-58 deg N, 33 -43 deg E) is most severely impacted by wildfire emissions. Over this area, AIRS CO, OMI AI, and MODIS AOT are significantly enhanced relative to the historical satellite record during the first 18 days in August when the anti-cyclonic circulation persisted. By mid-August, the anti-cyclonic circulation was replaced with westerly transport over Moscow and vicinity. The heat wave

Witte, J. C.↗
NASA NTRS1970

Intumescent Coatings as Fire Retardants

The development of fire-retardant coatings to protect surfaces which may be exposed to fire or extreme heat is a subject of intense interest to many industries. A fire-retardant paint has been developed which represents a new chemical approach for preparing intumescent coatings, and potentially, is very important to fire-prevention authorities. The requirements for a superior coating include ease of application, suitability to a wide variety of surfaces and finishes, and stability over an extended period of time within a broad range of ambient temperature and humidity conditions. These innovative coatings, when activated by the heat of a fire, react to form a thick, low-density, polymeric coating or char layer. Water vapor and sulphur dioxide are released during the intumescent reaction. Two fire-protection mechanisms thus become available: (1) the char layer retards the flow of heat, due to the extremely low thermal conductivity; and (2) water vapor and sulfur dioxide are released, providing fire quenching properties. Still another mechanism functions in cases where the char, by virtue of its high oxidation resistance and low thermal conductivity, reaches a sufficiently high temperature to re-radiate much of the incident heat load. The coatings consist of dispersions of selective salts of a nitro-amino-arornatic compound. Specifically, para-nitroaniline bisulfate and the ammonium salt of para-nitroaniline-ortho sulphuric acid (2-amino-5-nitrobenzenesulphuric acid) are used. Suitable vehicles are cellulose nitrate of lacquer grade, a nitrite-phenolic modified rubber, or epoxy-polysulfide copolymer. Three separate formulations have been developed. A solvent is usually employed, such as methylethyl ketone, butyl acetate, or toluene, which renders the coatings suitably thin and which evaporates after the coatings are applied. Generally, the intumescent material is treated as insoluble in the vehicle, and is ground and dispersed in the vehicle and solvent like an ordinary coating pigment. The char found on intumescence is better in terms of yield and physical properties than chars obtained from many previously known intumescent materials. Prior to intumescence, the coating has a density of 85 pounds per cubic foot. After intumescence, the density is approximately 0.3 pounds per cubic loot. The linear expansion of the coatings ranges from 70 to 200 times the applied coating thickness.

Parker, J. A.↗
NASA NTRS1992

Determination of the natural convection coefficient in low-gravity

Fire safety is an important issue in the current space program; ignition in low-g needs to be studied. The reduction in the gravitational acceleration causes changes in the ignition process. This paper examines the effect of gravity on natural convection, which is one of the important parameters in the ignition process. The NASA-Lewis 2.2 Second Drop Tower provided the low-gravity environment for the experiments. A series of experiments was conducted to measure the temperature of a small copper plate which was heated by a high intensity lamp. These experiments verified that in low-gravity the plate temperature increased faster than in the corresponding 1-g cases, and that the natural convection coefficient rapidly decreased in the low-gravity environment.

Goldmeer, J.↗
NASA NTRSDate not supplied

Autonomous Control for Arbitrary Thruster Configurations and Mass Properties in Special Euclidean Group SE(3)

Most current methods for determining maneuvers and thrust firing sequences depend on explicit and predetermined commands generated by a combination of on-board systems and ground-based human-in-the-loop methods. For spacecraft and space structures with changing mass properties and thruster configurations, such as the Deep Space Gateway as it changes configurations throughout its lifetime, determining these commands can be time-consuming and computationally intensive. However, recent work within the Lie GroupSE (3) has offered ways of autonomously determining the location, power, precision, and capabilities of thrusters in any arbitrary position. Furthermore, a method for determining thruster firing sequences based on an arbitrary control input (both translational and rotational in a coupled, 6-element vector) and arbitrary thruster configurations has also recently been developed. When combining these methods, any spacecraft with any mass properties and thruster configurations can be understood in terms of controllability limits and thruster firing sequences can be generated quickly and with low computational load, thus extending the autonomous capabilities of deep space missions. In this work, this method is presented and explored in terms of computational load, robustness in the presence of uncertainty, and overall performance. The capabilities of this method are also examined in the case of the Deep Space Gateway both in fully controllable configurations and uncontrollable configurations.

Control↗
DOE OSTI2025

Elevated Forest Canopy Loss After Wildfires in Moist and Cool Forests in the Pacific Northwest

Wildfire frequency, intensity, and rate of spread are increasing across the Western U.S, resulting in more severe ecosystem impacts. Significant tree mortality can occur years after fire events, but this has received little attention compared to the immediate tree loss during a fire. We overlapped forest cover loss data with burn severity maps in the U.S. Pacific Northwest and quantified the total and delayed forest canopy loss after fires. We found that wildfires resulted in total canopy loss fraction (CLF) of 84%, 53%, and 22% within 3 years in areas burned at high, moderate, and low severity, respectively. The delayed canopy loss accounted for approximately 1/3, 1/2, and 2/3 of the total canopy loss for high, moderate, and low severity burns. Delayed canopy loss was greater in moist and cool areas than in dry and warm areas, likely because tree species in wetter environments were less adapted to survive when fires did occur. Across all forests, delayed CLF doubled as temperature increased from the climatological mean to a hot anomaly and tripled as vapor pressure deficit increased from a wet anomaly to a dry anomaly. Fire impacts on forest ecosystems are likely to intensify under future climate scenarios as wildfires expand into areas that historically experienced infrequent fires. The impacts can also be exacerbated by more frequent compound extreme events, such as droughts, heatwaves, and fires. These findings highlight the urgent need for targeted forest management strategies, particularly in mesic forests, to mitigate future fire impacts.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Autonomous Control for Arbitrary Thruster Configurations and Mass Properties in Special Euclidean Group SE(3)

Most current methods for determining maneuvers and thrust firing sequences depend on explicit and predetermined commands generated by a combination of on-board systems and ground-based human-in-the-loop methods. For spacecraft and space structures with changing mass properties and thruster configurations, such as the Deep Space Gateway as it changes configurations throughout its lifetime, determining these commands can be time-consuming and computationally intensive. However, recent work within the Lie group SE(3) has offered ways of autonomously determining the location, power, precision, and capabilities of thrusters in any arbitrary position. Furthermore, a method for determining thruster firing sequences based on an arbitrary control input (both translational and rotational in a coupled, 6-element vector) and arbitrary thruster configurations has also recently been developed. When combining these methods, any spacecraft with any mass properties and thruster configurations can be understood in terms of controllability limits and thruster firing sequences can be generated quickly and with low computational load, thus extending the autonomous capabilities of deep space missions. In this work, this method is presented and explored in terms of convergence time to the desired pose. The capabilities of this method are also examined in the case of the Deep Space Gateway both in fully controllable configurations and uncontrollable configurations.

SE(3)↗
DOE OSTI2022

From the Fire: A Deeper Look at the Phoenix Stream

We use 6 yr of data from the Dark Energy Survey to perform a detailed photometric characterization of the Phoenix stellar stream, a 15° long, thin, dynamically cold, low-metallicity stellar system in the Southern Hemisphere. We use natural splines, a nonparametric modeling technique, to simultaneously fit the stream track, width, and linear density. This updated stream model allows us to improve measurements of the heliocentric distance (17.4 ± 0.1 (stat.) ±0.8 (sys.) kpc) and distance gradient (−0.009 ± 0.006 kpc deg$^{−1}$) of Phoenix, which corresponds to a small change of 0.13 ± 0.09 kpc in heliocentric distance along the length of the stream. We measure linear intensity variations on degree scales, as well as deviations in the stream track on ∼2° scales, suggesting that the stream may have been disturbed during its formation and/or evolution. We recover three peaks and one gap in linear intensity along with fluctuations in the stream track. Compared to other thin streams, the Phoenix stream shows more fluctuations and, consequently, the study of Phoenix offers a unique perspective on gravitational perturbations of stellar streams. We discuss possible sources of perturbations to Phoenix, including baryonic structures in the Galaxy and dark matter subhalos.

79 ASTRONOMY AND ASTROPHYSICS↗