Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “line relaxation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electron thermalization and relaxation in laser-heated nickel by few-femtosecond core-level transient absorption spectroscopy

Direct measurements of photoexcited carrier dynamics in nickel are made using few-femtosecond extreme ultraviolet (XUV) transient absorption spectroscopy at the nickel M 2,3 edge. It is observed that the core-level absorption line shape of photoexcited nickel can be described by a Gaussian broadening (σ) and a red shift (ω s ) of the ground-state absorption spectrum. Theory predicts and the experimental results verify that after initial rapid carrier thermalization, the electron temperature increase (ΔT ) is linearly proportional to the Gaussian broadening factor σ, providing quantitative real-time tracking of the relaxation of the electron temperature. Measurements reveal an electron cooling time for 50 nm thick polycrystalline nickel films of 640 ± 80 fs. With hot thermalized carriers, the spectral red shift exhibits a power-law relationship with the change in electron temperature of ω s ∝ ΔT 1.5 . Rapid electron thermalization via carrier-carrier scattering accompanies and follows the nominal 4-fs photoexcitation pulse until the carriers reach a quasithermal equilibrium. Entwined with a <6 fs instrument response function, carrier thermalization times ranging from 34 fs to 13 fs are estimated from experimental data acquired at different pump fluences and it is observed that the electron thermalization time decreases with increasing pump fluence. Here, the study provides an initial example of measuring electron temperature and thermalization in metals in real time with XUV light, and it lays a foundation for further investigation of photoinduced phase transitions and carrier transport in metals with core-level absorption spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Fundamental optical transitions in hexagonal boron nitride epilayers

Fundamental optical transitions in hexagonal boron nitride (h-BN) epilayers grown on sapphire by metal–organic chemical vapor deposition (MOCVD) using triethylboron as the boron precursor have been probed by photoluminescence (PL) emission spectroscopy. The low temperature (10 K) PL spectrum exhibits two groups of emission lines. The first group includes the direct observation of the free exciton and impurity bound exciton (BX) transitions and phonon replicas of the BX transition, whereas the second group is attributed to the direct observation of the band-to-band transition and its associated phonon replicas. The observations of zero-phonon lines of the band-to-band and exciton transitions, which are supposedly forbidden or “dark” in perfect h-BN crystals, result from a relaxed requirement of momentum conservation due to symmetry-breaking in the presence of high concentrations of impurities/defects and strain, which in turn provided more deterministic values of the energy bandgap (E g ), exciton binding energy (E x ), and binding energy of impurity bound excitons (E BX ) in h-BN epilayers. Excitonic parameters of h-BN epilayers grown by MOCVD, carbon-free chemical vapor deposition, and high purity h-BN bulk materials are compared and discussed. The present results, together with available information in the literature, represent a significant improvement in the understanding of the fundamental optical properties and excitonic parameters of h-BN ultrawide bandgap semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chemical Pressure-Derived Assembly Principles for Dodecagonal Quasicrystal Approximants and Other Complex Frank–Kasper Phases

The structures of complex intermetallic compounds can often be interpreted in terms of assemblies of units from simpler parent phases. For example, dodecagonal quasicrystals appear, when viewed down their high-symmetry axes, as plane-filling arrangements of square and triangular tiles corresponding to the Cr 3 Si and Al 3 Zr 4 structure types, respectively. The atomic arrangements and cell-dimensions at the (100) faces of the cells of these structures provide a close geometrical match, which underlies not only dodecagonal quasicrystals and their approximants, but also the much more common σ-phase structure. In this Article, we show that such intergrowth of parent structures can arise from more than just geometrical coincidences, but can be driven by a complementary matching of atomic packing forces. DFT-Chemical Pressure (CP) analysis on elemental versions of the Cr 3 Si and Al 3 Zr 4 types reveal that in both cases arrays of positive interatomic pressures inhibit the formation of optimal contacts elsewhere in the structures. When they are lined up at the potential Cr 3 Si/Al 3 Zr 4 interfaces, however, positive pressures from the two structures interdigitate rather than coincide, providing the opportunity for the relaxation of strained interatomic contacts. That such relief is afforded by the interfaces is confirmed by CP analysis of the σ-phase (FeCr-type) structure. Building on this scheme, we introduce the CP interface function to represent how the CP features of atoms within a structure impact planes or other surfaces that could serve as interfaces between different structures. Using this function, we then explore how the favorability of interfaces between Cr 3 Si and Al 3 Zr 4 -type units is tuned by partial elemental substitution with Si, as well as their potential matches with Laves phase units. Furthermore, the emerging picture provides an account for features of the quasicrystal approximants Mn 7 VSi 2 and Mn 81.5 Si 18.5 , as well as a framework for approaching intermetallic intergrowth structures more broadly.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Three-dimensional characterization of modifications in sapphire exposed to laser-induced damage using multimodal spectral microimaging

Sapphire (Al 2 O 3 ) is a commonly used dielectric material with many applications in lasers and optical systems. Owing to its high resistivity to laser induced damage, it is particularly suitable for use in high power laser systems. This work focuses on developing techniques to characterize material modifications in sapphire. These techniques were applied following localized laser induced ablation, commonly referred to as laser-damage, resulting from exposure to single 100-ps and 6-ns pulses. Measurements of fluorescence-based piezospectroscopy and confocal Raman microscopy were performed with spatial resolution on the order of 1 μ m. Raman microscopy reveals that the relaxation of material exposed to the rapid laser heating, elastic and viscoplastic deformation, melting, and solidification leads to the formation of a polycrystalline material phase. In addition, narrowband fluorescence lines, referred to as R 1 and R 2 , exhibit pressure-sensitive changes to their spectral profiles, allowing 3D internal stresses to be recorded with spatial resolution of the order of a few micrometers.

Laser-damage↗
DOE OSTI2021

The impacts of convex piecewise linear cost formulations on AC optimal power flow

Despite strong connections through shared application areas, research efforts on power market optimization (e.g., unit commitment) and power network optimization (e.g., optimal power flow) remain largely independent. A notable illustration of this is the treatment of power generation cost functions, where nonlinear network optimization has largely used polynomial representations and market optimization has adopted piecewise linear encodings. This work combines state-of-the-art results from both lines of research to understand the best mathematical formulations of the nonlinear AC optimal power flow problem with piecewise linear generation cost functions. An extensive numerical analysis of non-convex models, linear approximations, and convex relaxations across fifty-four realistic test cases illustrates that nonlinear optimization methods are surprisingly sensitive to the mathematical formulation of piecewise linear functions. The results indicate that a poor formulation choice can slow down algorithm performance by a factor of ten, increasing the runtime from seconds to minutes. Furthermore, these results provide valuable insights into the best formulations of nonlinear optimal power flow problems with piecewise linear cost functions, an important step towards building a new generation of energy markets that incorporate the nonlinear AC power flow model.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

The Scattering of Phonons by Infinitely Long Quantum Dislocations Segments and the Generation of Thermal Transport Anisotropy in a Solid Threaded by Many Parallel Dislocations

A canonical quantization procedure is applied to the interaction of elastic waves—phonons—with infinitely long dislocations that can oscillate about an equilibrium, straight line, configuration. The interaction is implemented through the well-known Peach–Koehler force. For small dislocation excursions away from the equilibrium position, the quantum theory can be solved to all orders in the coupling constant. We study in detail the quantum excitations of the dislocation line and its interactions with phonons. The consequences for the drag on a dislocation caused by the phonon wind are pointed out. We compute the cross-section for phonons incident on the dislocation lines for an arbitrary angle of incidence. The consequences for thermal transport are explored, and we compare our results, involving a dynamic dislocation, with those of Klemens and Carruthers, involving a static dislocation. In our case, the relaxation time is inversely proportional to frequency, rather than directly proportional to frequency. As a consequence, the thermal transport anisotropy generated on a material by the presence of a highly-oriented array of dislocations is considerably more sensitive to the frequency of each propagating mode, and, therefore, to the temperature of the material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Plasmon Dynamics Driven by Aggregation of Tris(2,2′-bipyridine)ruthenium(II)-Functionalized Gold Nanoparticles Probed by XANES and Transient Absorption Spectroscopy

Energy conversion dynamics is critical for advancing next-generation photovoltaics, optoelectronics, and light-harvesting technologies. Noble metal plasmonic nanoparticles play a pivotal role as nanoscale electromagnetic confinement structures, driving photon-induced chemical reactions. In this study, we explore the effects of [Ru(bpy) 3 ] 2+ functionalization and aggregation on citrate-capped gold nanoparticles (AuNPs) of 40 and 100 nm diameters, focusing on molecule-plasmon interactions and their influence on electronic and energy dissipation properties. X-ray absorption near-edge spectroscopy (XANES) revealed that [Ru(bpy) 3 ] 2+ functionalization induces controlled aggregation without altering the oxidation state of gold. A more pronounced white-line intensity is observed in 40 nm AuNPs, consistent with greater s–p–d hybridization and a higher density of surface states, likely influenced by both nanoparticle size and aggregation. Transient absorption (TA) spectroscopy highlights faster electron–phonon relaxation dynamics in aggregated 40 nm nanoparticles, which is attributed to increased electron delocalization and more efficient coupling to the phonon bath. In contrast, 100 nm nanoparticles exhibit minimal changes due to a lower degree of aggregation. Interestingly, we observe that enhanced electron–phonon coupling in aggregated nanoparticles coincides with a slowing of electron–electron scattering. These observations suggest a competitive interplay between the two relaxation pathways, where enhanced energy transfer to the lattice in aggregated systems can suppress electronic thermalization. In conclusion, these findings underscore the critical role of nanoparticle size, aggregation, and molecule–surface interactions in modulating plasmonic dynamics and excited-state lifetimes and further provide valuable insights into designing tailored plasmonic systems with transformative potential for sensing, catalysis, and energy conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Erbium-Implanted WS 2 Flakes with Room-Temperature Photon Emission at Telecom Wavelengths

Optically addressable spin impurities in crystals along with device engineering provide an attractive route to realizing quantum technologies in the solid state, but reconciling disparate emitter and host material constraints for a given target application is often challenging. Rare-earth ions in two-dimensional (2D) materials could mitigate this problem given the atomic-like transitions of the emitters and the versatile nature of van der Waals systems. Here we combine ion implantation, confocal microscopy, and ab initio calculations to examine the photon emission of Er-doped WS 2 flakes. Optical spectroscopy reveals narrow, long-lived photoluminescence lines in the telecom band, which we activate after low-temperature thermal annealing. Spectroscopic and polarization-selective measurements show a uniform response across the ensemble, while the fluorescence brightness remains mostly unchanged with temperature, suggesting nonradiative relaxation channels are inefficient. Our results create opportunities for novel solid state devices coupling 2D-hosted, telecom-band emitters to photonic heterostructures separately optimized for photon manipulation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Line coupling and line mixing effects on calculated widths of symmetric-top molecules with the k-degeneracy: A theoretical study of N 2 -, O 2 -, and air-broadened lines of CH 3 I

Calculations of the N 2 -, O 2 -, and air-broadened widths, together with their temperature dependence exponents have been made for transitions of CH 3 I in the ν 5 and ν 6 bands. The calculations are based on a semi-classical line shape formalism developed by the current authors through modifying and refining the Robert-Bonamy formalism. In recent years, we have applied this formalism for linear molecules, symmetric-top molecules with inversion symmetry, and asymmetric-top molecules. For symmetric-top molecules with the k degeneracy such as CH 3 I, the formalism has a new feature. In this case, one should consider each of the CH 3 I transitions labeled by k i or f ≠ 0 as a doublet. Then, one needs to consider the effects of the line mixing process between these two components. Furthermore, comparisons of our theoretical predictions with some data available demonstrate a very reasonable agreement. Finally, we propose new experiments at higher perturber pressures that would enable one to check the theoretically calculated relaxation matrices and to extend the analysis to the inter-doublet mixing effects.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Repulsive Tomonaga-Luttinger liquid in the quasi-one-dimensional alternating spin-$\frac{1}{2}$ antiferromagnet NaVOPO 4

Here, we probe the magnetic field-induced Tomonaga-Luttinger liquid (TLL) state in the bond-alternating spin1/2 antiferromagnetic (AFM) chain compound NaVOPO 4 using thermodynamic as well as local μSR and 31 P NMR probes down to mK temperatures in magnetic fields up to 14 T. The μSR and NMR relaxation rates in the gapless TLL regime decay slowly following characteristic power-law behavior, enabling us to directly determine the interaction parameter K as a function of the magnetic field. These estimates are crosschecked using magnetization and specific heat data. The field-dependent K lies in the range of 0.4 < K < 1 and indicates the repulsive nature of interactions between the spinless fermions, in line with the theoretical predictions. This renders NaVOPO 4 the first experimental realization of TLL with repulsive fermionic interactions in hitherto studied S = 1/2 bond-alternating AFM-AFM chain compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Development of a true single line of sight 3D hot-spot imaging for the National Ignition Facility

High resolution 3D self-emission x-ray imaging during inertial confinement fusion capsule implosion enables the measurement of the shape of the hotspot. While current 3D imaging capabilities use multiple lines of sight to perform image reconstruction, it would be highly desirable to use only one line of sight, as this would significantly reduce the number of windows in the target hohlraum and decrease their impacts on implosion symmetry. Such a goal is achievable using the zone plate coded imaging technique developed by N. M. Ceglio [Proc. SPIE 0106, 55-62 (1977)]. It consists of fielding a visible light Fresnel zone plate on shot to record a shadowgraph. Here, the image can then be reconstructed either by printing the shadowgraph on a transparent film and shining a suitable wavelength light through it or by numerical reconstruction. A new approach using numerical reconstruction is presented, and it relaxes the constraint by an order of magnitude on the optic design, thus enabling an easier fabrication process, as it allows a scaling-up of the optic dimensions. The design, fabrication process, and testing with an x-ray source of a prototype is presented. The reconstruction of an ~14.5 × 17 μm 2 broadband x-ray source was successful and shows that the performances are in line with expectation with an at least 5 mm axial resolution.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Spin/valley pumping of resident electrons in WSe2 and WS2 monolayers

Abstract Monolayers of transition metal dichalcogenides are ideal materials to control both spin and valley degrees of freedom either electrically or optically. Nevertheless, optical excitation mostly generates excitons species with inherently short lifetime and spin/valley relaxation time. Here we demonstrate a very efficient spin/valley optical pumping of resident electrons in n-doped WSe 2 and WS 2 monolayers. We observe that, using a continuous wave laser and appropriate doping and excitation densities, negative trion doublet lines exhibit circular polarization of opposite sign and the photoluminescence intensity of the triplet trion is more than four times larger with circular excitation than with linear excitation. We interpret our results as a consequence of a large dynamic polarization of resident electrons using circular light.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Sub-melt nanosecond pulsed-laser induced densification and strain-field relaxation in single-crystal diamond

Dislocations and polishing-induced defect networks in synthetic diamond introduce local strain fields and broaden Raman features, limiting performance in optical, thermal, and electronic applications. Laser annealing is emerging as a promising approach to repair surface and near-surface defects in diamond without entering the melt regime, yet surface densification, defect-state modification, and associated structural changes have not been well quantified. In this work, we show that sub-melt nanosecond pulsed-laser annealing (PLA) induces near-surface densification and defect-mediated strain relaxation in single-crystal Chemical Vapor Deposition (CVD) diamond. Single- and two-pulse PLA were applied, and structural evolution was quantified using co-registered ISO 25,178 white-light interferometry, depth-resolved Raman spectroscopy, and cross-sectional STEM with geometric phase analysis (GPA). Across a 5 × 6 grid (n = 30), responsive regions exhibit large reductions in local slope (Sdq 45–65%), developed area (Sdr 60–90%), height spread (Sp, Sz 30–65%), void volume (Vv 57–60%), and roughness amplitude (Sa, Sq 48–57%), consistent with densification of ∼4–6.5 nm. Raman profiling shows narrowing of the diamond line and improved spectral uniformity to depths of ∼2–3 μm. Given that the Raman probing depth significantly exceeds the densified layer thickness, this response is interpreted as consistent with long-range strain-field redistribution originating from the near-surface region. STEM-GPA strain maps further support this interpretation, showing smoother strain fields, suppressed hotspots, and redistribution of localized strain concentrations following PLA. These results are consistent with defect-mediated strain relaxation and densification-driven modification of the near-surface energy state. The approach provides a scalable pathway for improving near-surface structural quality in diamond relevant to electronic, photonic, and quantum applications.

Areal surface metrology (ISO 25,178)↗
DOE OSTI2022

Photoinduced band renormalization effects in the topological nodal-line semimetal ZrSiS

Out-of-equilibrium effects provide an elegant pathway for probing and understanding the underlying physics of topological materials. In particular, controlling electronic band structure properties using ultrafast optical pulses has shown promise for creating exotic states of matter. Of recent interest is band renormalization in Dirac and Weyl semimetals as it leads to direct physical observables through the enhancement of the effective mass or in the shift of resonant energies. Here, in this work, we provide experimental and theoretical signatures of photoinduced renormalization of the electronic band structure in the topological nodal-line semimetal ZrSiS. Specifically, we show how the change in the transient reflectivity spectra under femtosecond optical excitations is induced by out-of-equilibrium effects that renormalize the kinetic energy of electrons. We associate the observed spectral features with an enhancement of the effective mass and to a redshift of the resonant frequency as a function of pump field strength. Finally, we show that the transient relaxation dynamics of the reflectivity is primarily an electronic effect with a negligible phononic contribution. Our study presents conclusive modifications of electronic properties in ZrSiS using ultrashort pulses and demonstrates the potential of this approach in creating photoinduced phases in topological quantum matter through an all-optical route.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

SLAC microresonator RF(SMuRF) electronics: A tone-tracking readout system for superconducting microwave resonator arrays

Here, we describe the newest generation of the SLAC Microresonator RF (SMuRF) electronics, a warm digital control and readout system for microwave-frequency resonator-based cryogenic detector and multiplexer systems, such as microwave superconducting quantum interference device multiplexers (μmux) or microwave kinetic inductance detectors. Ultra-sensitive measurements in particle physics and astronomy increasingly rely on large arrays of cryogenic sensors, which in turn necessitate highly multiplexed readout and accompanying room-temperature electronics. Microwave-frequency resonators are a popular tool for cryogenic multiplexing, with the potential to multiplex thousands of detector channels on one readout line. The SMuRF system provides the capability for reading out up to 3328 channels across a 4–8 GHz bandwidth. Notably, the SMuRF system is unique in its implementation of a closed-loop tone-tracking algorithm that minimizes RF power transmitted to the cold amplifier, substantially relaxing system linearity requirements and effective noise from intermodulation products. Here, we present a description of the hardware, firmware, and software systems of the SMuRF electronics, comparing achieved performance with science-driven design requirements. In particular, we focus on the case of large-channel-count, low-bandwidth applications, but the system has been easily reconfigured for high-bandwidth applications. The system described here has been successfully deployed in lab settings and field sites around the world and is baselined for use on upcoming large-scale observatories.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Evidence for AGN-regulated Cooling in Clusters at z ∼ 1.4: A Multiwavelength View of SPT-CL J0607-4448

Abstract We present a multiwavelength analysis of the galaxy cluster SPT-CL J0607-4448 (SPT0607), which is one of the most distant clusters discovered by the South Pole Telescope at z = 1.4010 ± 0.0028. The high-redshift cluster shows clear signs of being relaxed with well-regulated feedback from the active galactic nucleus (AGN) in the brightest cluster galaxy (BCG). Using Chandra X-ray data, we construct thermodynamic profiles and determine the properties of the intracluster medium. The cool-core nature of the cluster is supported by a centrally peaked density profile and low central entropy ( K 0 = 18 − 9 + 11 keV cm 2 ), which we estimate assuming an isothermal temperature profile due to the limited spectral information given the distance to the cluster. Using the density profile and gas cooling time inferred from the X-ray data, we find a mass-cooling rate M ̇ cool = 100 − 60 + 90 M ⊙ yr −1 . From optical spectroscopy and photometry around the [O ii ] emission line, we estimate that the BCG star formation rate is SFR [ O II ] = 1.7 − 0.6 + 1.0 M ⊙ yr −1 , roughly two orders of magnitude lower than the predicted mass-cooling rate. In addition, using ATCA radio data at 2.1 GHz, we measure a radio jet power P cav = 3.2 − 1.3 + 2.1 × 10 44 erg s −1 , which is consistent with the X-ray cooling luminosity ( L cool = 1.9 − 0.5 + 0.2 × 10 44 erg s −1 within r cool = 43 kpc). These findings suggest that SPT0607 is a relaxed, cool-core cluster with AGN-regulated cooling at an epoch shortly after cluster formation, implying that the balance between cooling and feedback can be reached quickly. We discuss the implications for these findings on the evolution of AGN feedback in galaxy clusters.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

On the non-existence of stepped-pressure equilibria far from symmetry

The Stepped Pressure Equilibrium Code (SPEC) (Hudson et al 2012 Phys. Plasmas 19 112502) has been successful in the construction of equilibria in 3D configurations that contain a mixture of flux surfaces, islands and chaotic magnetic field lines. In this model, the plasma is sliced into sub-volumes separated by ideal interfaces, and in each volume the magnetic field is a Beltrami field. In the cases where the system is far from possessing a continuous symmetry, such as in stellarators, the existence of solutions to a stepped-pressure equilibrium with given constraints, such as a multi-region relaxed MHD minimum energy state, is not guaranteed but is often taken for granted. Using SPEC, we have studied two different scenarios in which a solution fails to exist in a slab with analytic boundary perturbations. Here we found that with a large boundary perturbation, a certain interface becomes fractal, corresponding to the break up of a Kolmogorov–Arnold–Moser (KAM) surface. Moreover, an interface can only support a maximum pressure jump while a solution of the magnetic field consistent with the force balance condition can be found. An interface closer to break-up can support a smaller pressure jump. We discovered that the pressure jump can push the interface closer to being non-smooth through force balance, thus significantly decreasing the maximum pressure it can support. Our work shows that a convergence study must be performed on a SPEC equilibrium with interfaces close to break-up. These results may also provide insights into the choice of interfaces and have applications in finding out the maximum pressure a machine can support.

3D equilibrium↗
DOE OSTI2022

Non-Equilibrium relaxation, aging scaling, and critical depinning dynamics of skyrmions in disordered magnetic films. Final Report

Technical applications of type-II superconductors, especially high-Tc compounds, in external magnetic fields require an effective flux pinning mechanism to reduce Ohmic losses due to flux creep and flow. Naturally abundant point defects, dislocations, and twin boundaries as well as artificially introduced disorder may serve as effective pinning centers for magnetic vortices. The properties of interacting flux lines subject to strong thermal fluctuations and point-like or extended pinning centers have therefore been a major research focus in condensed matter physics, and considerable progress has been achieved in the characterization and mathematical description of the equilibrium phases and non-equilibrium steady states of vortex matter. Detailed studies of the rich phase diagrams that reveal novel glassy states as well as the associated complex dynamical phenomena have in turn enriched the theoretical understanding of condensed matter systems, elucidating specifically the kinetics of elastic objects driven through disordered media and the important role of topological defects such as vortices and dislocations in various materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗