SEARCH · Engineering Papers

Results for “line relaxation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1977

An efficient numerical method for solving the incompressible Navier-Stokes equations

This paper describes an efficient numerical method for solving the steady incompressible Navier-Stokes equations. The method is a fully implicit method based on the generalized Galerkin method, and the resulting system of equations is solved in a sweeping mode by iterative line relaxation. Results of the present method are compared with published results for separating and reattaching flows, and parametric studies showing the effects of step size, boundary locations, and Reynolds number are presented. The present method is substantially faster than previously published methods; typical run times range from 10 sec to 1 min of 7600 CPU time; and, based on results obtained to date, it is stable at any Reynolds number.

Murphy, J. D.↗

NASA NTRS1977

A user's guide for V174, a program using a finite difference method to analyze transonic flow over oscillating wings

The design and usage of a pilot program using a finite difference method for calculating the pressure distributions over harmonically oscillating wings in transonic flow are discussed. The procedure used is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady differential equation for small disturbances. The steady velocity potential which must be obtained from some other program, is required for input. The unsteady differential equation is linear, complex in form with spatially varying coefficients. Because sinusoidal motion is assumed, time is not a variable. The numerical solution is obtained through a finite difference formulation and a line relaxation solution method.

Butler, T. D.↗

NASA NTRS1979

An elliptic representation of coupled boundary layers and inviscid core for computation of separated internal flows

This report presents a viscous-inviscid calculation method for the prediction of turbulent incompressible flows in diffusers with small regions of stall. Integral turbulent boundary layer equations (BLE) are used to provide boundary conditions for a finite difference representation of the inviscid core. The BLE are applied at the floating displacement-thickness line, resulting in a simulataneous set of nonlinear block tridiagonal equations which are solved iteratively using a sucessive line-relaxation technique. Results of the method have been applied to calculate the performance of a variety of asymmetric stalled diffusers.

Ghose, S.↗

NASA NTRS1979

A users guide for A344: A program using a finite difference method to analyze transonic flow over oscillating airfoils

The design and usage of a pilot program for calculating the pressure distributions over harmonically oscillating airfoils in transonic flow are described. The procedure used is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady differential equations for small disturbances. The steady velocity potential which must be obtained from some other program, was required for input. The unsteady equation, as solved, is linear with spatially varying coefficients. Since sinusoidal motion was assumed, time was not a variable. The numerical solution was obtained through a finite difference formulation and either a line relaxation or an out of core direct solution method.

Weatherill, W. H.↗

NASA NTRS1981

Prediction of swirling reacting flow in ramjet combustors

Numerical computations have been undertaken for a basic two-dimensional axisymmetric flowfield which is similar to that found in conventional gas turbine and ramjet combustors. A swirling flow enters a larger chamber via a sudden or gradual expansion. The calculation method involves a staggered grid system for axial and radial velocities, a line relaxation procedure for efficient solution of the equations, a two-equation turbulence energy-turbulence dissipation rate turbulence model, a stairstep boundary representation of the expansion flow, and realistic accommodation of swirl effects. The results include recirculation zone characterization and predicted mean streamline patterns. Predictions with and without chemical reaction are obtained. An associated isothermal experimental flow study is providing a useful data base. Successful outcomes of the work can be incorporated into the more combustion- and hardware-oriented activities of industrial concerns.

Lilley, D. G.↗

NASA NTRS1982

A Computer Code for Swirling Turbulent Axisymmetric Recirculating Flows in Practical Isothermal Combustor Geometries

A primitive pressure-velocity variable finite difference computer code was developed to predict swirling recirculating inert turbulent flows in axisymmetric combustors in general, and for application to a specific idealized combustion chamber with sudden or gradual expansion. The technique involves a staggered grid system for axial and radial velocities, a line relaxation procedure for efficient solution of the equations, a two-equation k-epsilon turbulence model, a stairstep boundary representation of the expansion flow, and realistic accommodation of swirl effects. A user's manual, dealing with the computational problem, showing how the mathematical basis and computational scheme may be translated into a computer program is presented. A flow chart, FORTRAN IV listing, notes about various subroutines and a user's guide are supplied as an aid to prospective users of the code.

Lilley, D. G.↗

NASA NTRS1982

Computation of transonic potential flow about 3 dimensional inlets, ducts, and bodies

An analysis was developed and a computer code, P465 Version A, written for the prediction of transonic potential flow about three dimensional objects including inlet, duct, and body geometries. Finite differences and line relaxation are used to solve the complete potential flow equation. The coordinate system used for the calculations is independent of body geometry. Cylindrical coordinates are used for the computer code. The analysis is programmed in extended FORTRAN 4 for the CYBER 203 vector computer. The programming of the analysis is oriented toward taking advantage of the vector processing capabilities of this computer. Comparisons of computed results with experimental measurements are presented to verify the analysis. Descriptions of program input and output formats are also presented.

Reyhner, T. A.↗

NASA NTRS1981

Flow aerodynamics modeling of an MHD swirl combustor - Calculations and experimental verification

The paper describes a computer code for calculating the flow dynamics of a constant-density flow in the second-stage trumpet shaped nozzle section of a two-stage MHD swirl combustor for application to a disk generator. The primitive pressure-velocity variable, finite-difference computer code has been developed for the computation of inert nonreacting turbulent swirling flows in an axisymmetric MHD model swirl combustor. The method and program involve a staggered grid system for axial and radial velocities, and a line relaxation technique for the efficient solution of the equations. The code produces as output the flow field map of the nondimensional stream function, axial and swirl velocity. It was found that the best location for seed injection to obtain a uniform distribution at the combustor exit is in the central location for seed injected at the entrance to the second stage combustor.

Gupta, A. K.↗

NASA NTRS1982

Transonic perturbation analysis of wing-fuselage-nacelle-pylon configurations with powered jet exhausts

A transonic small perturbation method has been developed for the analysis of general wing-fuselage-nacelle-pylon configurations with powered jet exhausts. Finite difference successive line relaxation algorithm is used to solve the small disturbance potential equation in conservative form. The nacelle tangency condition and the jet exhaust plume contact conditions are fulfilled in a quasi-cylindrical fashion on a surface fitting the Cartesian grid. The pylon tangency condition is treated in a quasi-planar manner as for the wing. Viscous displacement effects on the wing are modeled by suitable shape changes including the placement of a viscous ramp at the base of the shock. Computed results of a transport configuration show satisfactory correlation with test data.

Wai, J. C.↗

NASA NTRS1982

Flow aerodynamics modeling of an MHD swirl combustor - Calculations and experimental verification

This paper describes a computer code for calculating the flow dynamics of constant density flow in the second stage trumpet shaped nozzle section of a two stage MHD swirl combustor for application to a disk generator. The primitive pressure-velocity variable, finite difference computer code has been developed to allow the computation of inert nonreacting turbulent swirling flows in an axisymmetric MHD model swirl combustor. The method and program involve a staggered grid system for axial and radial velocities, and a line relaxation technique for efficient solution of the equations. Turbulence simulation is by way of a two-equation Kappa-epsilon model. The code produces as output the flowfield map of the nondimensional stream function, axial, and swirl velocity. Good agreement was obtained between the theoretical predictions and the qualitative experimental results. The best seed injector location for uniform seed distribution at combustor exit is with injector located centrally on the combustor axis at entrance to the second stage combustor.

Gupta, A. K.↗

NASA NTRS1983

Prediction of an axisymmetric combusting flow

A numerical model for turbulent, recirculating combusting flow is developed and applied to a research combustor. The model is based on the time-averaged Navier-Stokes equations with k-epsilon turbulence closure and the compositional fluctuations at each point are given probabilistically in terms of the mixture fraction. The probability density function is derived from transport equations for its first two moments along with an assumption regarding its shape. The resulting equations are solved using a standard line relaxation algorithm. It is found that the predictions of the model are in good agreement with data from an axisymmetric, bluff-body stabilized research combustor, while the major discrepancies are similar to those found in isothermal flow comparisons. The peculiar features of this flow which contribute to the errors are examined. The agreement between the theory and data deteriorates as the central jet velocity is increased which indicates an enhanced role for unsteady effects.

Correa, S. M.↗

NASA NTRS1984

Three-dimensional transonic potential flow about complex 3-dimensional configurations

An analysis has been developed and a computer code written to predict three-dimensional subsonic or transonic potential flow fields about lifting or nonlifting configurations. Possible condfigurations include inlets, nacelles, nacelles with ground planes, S-ducts, turboprop nacelles, wings, and wing-pylon-nacelle combinations. The solution of the full partial differential equation for compressible potential flow written in terms of a velocity potential is obtained using finite differences, line relaxation, and multigrid. The analysis uses either a cylindrical or Cartesian coordinate system. The computational mesh is not body fitted. The analysis has been programmed in FORTRAN for both the CDC CYBER 203 and the CRAY-1 computers. Comparisons of computed results with experimental measurement are presented. Descriptions of the program input and output formats are included.

Reyhner, T. A.↗

NASA NTRS1986

Propeller design by optimization

The feasibility of designing propellers by an optimization procedure is investigated. A scheme, which solves the full potential flow equation about a propeller by line relaxation, is modified so that the iterative solutions of the flow equation and the design parameters are updated simultaneously. Some technical problems in using optimization for designing propellers with maximum efficiency are identified. Approaches for overcoming these problems are presented.

Rizk, M. H.↗

NASA NTRS1987

Vortex breakdown simulation

In this paper, steady, axisymmetric inviscid, and viscous (laminar) swirling flows representing vortex breakdown phenomena are simulated using a stream function-vorticity-circulation formulation and two numerical methods. The first is based on an inverse iteration, where a norm of the solution is prescribed and the swirling parameter is calculated as a part of the output. The second is based on direct Newton iterations, where the linearized equations, for all the unknowns, are solved simultaneously by an efficient banded Gaussian elimination procedure. Several numerical solutions for inviscid and viscous flows are demonstrated, followed by a discussion of the results. Some improvements on previous work have been achieved: first order upwind differences are replaced by second order schemes, line relaxation procedure (with linear convergence rate) is replaced by Newton's iterations (which converge quadratically), and Reynolds numbers are extended from 200 up to 1000.

Hafez, M.↗

NASA NTRS1988

The computation of hypersonic ionized flows in chemical and thermal nonequlibrium

A numerical method to compute a two-dimensional hypersonic flowfield that is ionized and in thermochemical nonequilibrium has been developed. Such a flowfield is described by coupled time-dependent partial differential equations for the conservation of species mass, mass-average momentum, vibrational energy of each diatomic species, electron energy, and total mass-averaged energy. The steady-state solution to these fully coupled equations is obtained using an implicit Gauss-Seidel line relaxation technique. The computed electron densities in the flowfield compare well with experimental results.

Maccormack, Robert W.↗

NASA NTRS1988

An upwind differencing scheme for the time-accurate incompressible Navier-Stokes equations

The two-dimensional incompressible Navier-Stokes equations are solved in a time-accurate manner in using the method of pseudocompressibility. Using this method, subiterations in pseudotime are required to satisfy the continuity equation at each time step. An upwind differencing scheme based on flux-difference splitting is used to compute the convective terms. The upwind differencing is biased based on the sign of the local eigenvalue of the Jacobian matrix. Third-order or fifth-order spatial accuracy is maintained throughout the interior grid points. The equations are solved using an implicit line-relaxation scheme. This solution scheme is stable and is capable of running at large time steps in pseudotime, leading to fast convergence for each physical time step. A variety of computed results are presented to validate the present scheme. Results for the flow over an oscillating plate are compared with the exact analytic solution, good agreement is seen. Excellent comparison is obtained between the computed solution and the analytical results for inviscid channel flow with an oscillating back pressure. Flow solutions over a circular cylinder with vortex shedding are also presented. Finally, the flow past an airfoil at -90 deg angle-of-attack is also computed.

Rogers, Stuart E.↗

NASA NTRS1989

Numerical Simulation of Flow Through an Artificial Heart

A solution procedure was developed that solves the unsteady, incompressible Navier-Stokes equations, and was used to numerically simulate viscous incompressible flow through a model of the Pennsylvania State artificial heart. The solution algorithm is based on the artificial compressibility method, and uses flux-difference splitting to upwind the convective terms; a line-relaxation scheme is used to solve the equations. The time-accuracy of the method is obtained by iteratively solving the equations at each physical time step. The artificial heart geometry involves a piston-type action with a moving solid wall. A single H-grid is fit inside the heart chamber. The grid is continuously compressed and expanded with a constant number of grid points to accommodate the moving piston. The computational domain ends at the valve openings where nonreflective boundary conditions based on the method of characteristics are applied. Although a number of simplifing assumptions were made regarding the geometry, the computational results agreed reasonably well with an experimental picture. The computer time requirements for this flow simulation, however, are quite extensive. Computational study of this type of geometry would benefit greatly from improvements in computer hardware speed and algorithm efficiency enhancements.

Rogers, Stuart E.↗

NASA NTRS1988

A numerical method for predicting hypersonic flowfields

The flow about a body traveling at hypersonic speed is energetic enough to cause the atmospheric gases to react chemically and reach states in thermal nonequilibrium. In this paper, a new procedure based on Gauss-Seidel line relaxation is shown to solve the equations of hypersonic flow fields containing finite reaction rate chemistry and thermal nonequilibrium. The method requires a few hundred time steps and small computer times for axisymmetric flows about simple body shapes. The extension to more complex two-dimensional body geometries appears straightforward.

Maccormack, Robert W.↗