Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “limitations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Evolution of the Rate-Limiting step: From Thin Film to Thick Ni-rich Cathodes

Ni-rich NMC (LiNixMnyCo1-x-yO2, x = 0.6) has the attributes of high specific capacity (greater than 180 mAh g-1), high operating voltage (ca. 3.8 V) and low cost, which is therefore deemed as one of the most promising cathode candidates for next-generation high-energy Li-ion batteries (LIBs). However, challenges exist before the large-scale commercialization of Ni-rich cathode such as gas generation, capacity degradation especially at high rate or elevated temperatures. From thin film to densely pack high loading cathode, this work investigates the rate-limiting steps in Ni-rich cathodes e.g., phase structure, electronic and ionic conductivity to understand the reaction kinetics at different scales. This work provides new insights in understanding the electrochemical properties of Ni-rich cathode at different levels to inspire revolutionary ideas to address the fundamental issues of Ni-rich cathode from materials to relevant electrode levels.

Hu, Jiangtao↗
DOE OSTI2020

Rapid Identification of X-ray Diffraction Patterns Based on Very Limited Data by Interpretable Convolutional Neural Networks

Large volumes of data from material characterizations call for rapid and automatic data analysis to accelerate materials discovery. Herein, we report a convolutional neural network (CNN) that was trained based on theoretical data and very limited experimental data for fast identification of experimental X-ray diffraction (XRD) patterns of metal–organic frameworks (MOFs). To augment the data for training the model, noise was extracted from experimental data and shuffled; then it was merged with the main peaks that were extracted from theoretical spectra to synthesize new spectra. For the first time, one-to-one material identification was achieved. Theoretical MOFs patterns (1012) were augmented to a whole data set of 72 864 samples. It was then randomly shuffled and split into training (58 292 samples) and validation (14 572 samples) data sets at a ratio of 4:1. For the task of discriminating, the optimized model showed the highest identification accuracy of 96.7% for the top 5 ranking on a test data set of 30 hold-out samples. Neighborhood component analysis (NCA) on the experimental XRD samples shows that the samples from the same material are clustered in groups in the NCA map. Analysis on the class activation maps of the last CNN layer further discloses the mechanism by which the CNN model successfully identifies individual MOFs from the XRD patterns. Furthermore, this CNN model trained by the data augmentation technique would not only open numerous potential applications for identifying XRD patterns for different materials, but also pave avenues to autonomously analyze data by other characterization tools such as FTIR, Raman, and NMR spectroscopies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fueling limits in a cylindrical viscosity-limited reactor

Recently, a method to achieve a “natural hot-ion mode” was suggested by utilizing ion viscous heating in a rotating plasma with a fixed boundary. We explore the steady-state solution to the Braginskii equations and find the parameter regime in which a significant temperature difference between ions and electrons can be sustained in a driven steady state. Here, the threshold for this effect occurs at ρ i ≳ 0.1R. An analytic, leading order low flow solution is obtained, and a numerical, moderate Mach number M ≲ 2 is investigated. The limitation is found to be at moderate Mach numbers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Electrochemical Stability and Reversibility of Aqueous Polysulfide Electrodes Cycled Beyond the Solubility Limit

Batteries which use dissolved redox-active species, such as redox flow batteries (RFBs), are often considered to be constrained in their operation and energy density by the solubility limit of the redox species. Here, we show that soluble redox active electrolytes can be reversibly cycled deeply into the precipitation regime, permitting higher effective concentrations, energy densities, and lower costs. Using aqueous sodium polysulfide negative electrolytes cycled in the nominal Na 2 S 2 to Na 2 S 4 capacity range as an example, we show that the effective solubility can be increased from 5 M in the fully-dissolved state to as much as 10 M using the precipitation strategy. Stable cycling was observed at 8 M concentration over more than 1600h at room temperature. We also analyze the range of polysulfide electrochemical stability, and characterize the precipitate composition. This enhanced effective concentration approach may be generalized to other redox chemistries that utilize solubilized reactants, and may be especially useful for long-duration storage applications where slow charge-discharge rates allow equilibration of precipitated species with the redox-active solution.

25 ENERGY STORAGE↗
NASA NTRS1977

Upper limits of the rate constants for the reactions of CFCl3/F-11/, CF2Cl2/F-12/, and N2O with OH - Estimates of corresponding lower limits to their tropospheric lifetimes

A discharge-flow system with resonance fluorescence detection of OH is used to study the reactions of CFCl3, CF2Cl2, and N2O with OH at temperatures up to 480 K. Little, if any reaction was found, with upper limits of 5, 6, and 4 x 10 to the -16th cu cm/s reported at 480 K for the three rate constants. A very simple model is used to calculate removal times exceeding 10,000 years for reaction with tropospheric OH.

Chang, J. S.↗
NASA NTRS1994

The effect of incomplete fuel-air mixing on the lean blowout limit, lean stability limit and NO(x) emissions in lean premixed gas turbine combustors

Gas turbine engines for both land-based and aircraft propulsion applications are facing regulations on NOx emissions which cannot be met with current combustor technology. A number of alternative combustor strategies are being investigated which have the potential capability of achieving ultra-low NOx emissions, including lean premixed combustors, direct injection combustors, rich burn-quick quench-lean burn combustors and catalytic combustors. The research reported in this paper addresses the effect of incomplete fuel-air mixing on the lean limit performance and the NOx emissions characteristics of lean premixed combustors.

Shih, W.-P.↗
NASA NTRS1997

Testing for Random Limit Load Versus Static Limit Load

This document is an effort to report the basic test findings in an ongoing quest for understanding how random load factors should be applied to structural components in order to verify the strength of space flight hardware. A Spacelab experiment known as the Atmospheric Emission Photometric Imager (AEPI) was subjected to both an expected flight random environment and the associated Miles' equation equivalent static load. During each of these tests, the fiberglass pedestal was instrumented with 16 triaxial strain gauges around its base. Component strains and invariant stresses were compared. As seen previously in other hardware tests, the stress distribution from the random environment was an order of magnitude below the comparable static stresses. With a proposed data acquisition system, a strain database will be developed that will quantify an empirical relationship between dynamic and static limit stresses. This event will allow a more accurate estimate of launch environment effects on new technology structural components.

Lee, H. M.↗
NASA NTRS2004

Exploring the limits of crop productivity: beyond the limits of tipburn in lettuce

The productivity of lettuce in a combination of high light, high temperature, and elevated CO2 has not been commonly studied because rapid growth usually causes a calcium deficiency in meristems called tipburn, which greatly reduces quality and marketability. We eliminated tipburn by blowing air directly onto the meristem, which allowed us to increase the photosynthetic photon flux (PPF) to 1000 micromoles m-2 s-1 (57.6 mol m-2 d-1); two to three times higher than normally used for lettuce. Eliminating tipburn doubled edible yield at the highest PPF level. In addition to high PPF, CO2 was elevated to 1200 micromoles m-2 mol-1, which increased the temperature optimum from 25 to 30 degrees C. The higher temperature increased leaf expansion rate, which improved radiation capture and more than doubled yield. Photosynthetic efficiency, measured as canopy quantum yield in a whole-plant gas exchange system, steadily increased up to the highest temperature of 32 degrees C in high CO2. The highest productivity was 19 g m-2 d-1 of dry biomass (380 g d-1 fresh mass) averaged over the 23 days the plants received light. Without the limitation of tipburn, the combination of high PPF, high temperature, and elevated CO2 resulted in a 4-fold increase in growth rate over productivity in conventional environments.

NASA Discipline Life Support Systems↗