Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Techno-economic analysis and life-cycle analysis of two light-duty bio-blendstocks: isobutanol and aromatic rich hydrocarbons

Isobutanol and aromatic-rich hydrocarbons (ARHC) are two biomass-derived high octane blendstocks that could be blended with petroleum gasoline for use in optimized spark-ignition engines in light-duty vehicles, potentially increasing engine efficiency. To evaluate technology readiness, economic viability, and environmental impacts of these technologies, we use detailed techno-economic analysis (TEA) and life-cycle analysis (LCA). We assumed isobutanol is produced via biochemical conversion of an herbaceous feedstock blend while ARHC is produced via thermochemical conversion of a woody feedstock blend.The minimum estimated fuel selling price (MFSP) of isobutanol ranged from $5.57/gasoline gallon equivalent (GGE) based on today’s technology to $4.22/GGE with technology advancements. The MFSP of ARHC could decline from $5.20/GGE based on today’s technology to $4.20/GGE as technology improves. Both isobutanol and ARHC offer about 73% GHG emission reduction relative to petroleum gasoline per LCA of these two bio-blendstocks. On the other hand, water consumption in the production of both bio-blendstocks exceeds that of conventional gasoline although process engineering offers routes to cutting water consumption. Over their life cycles, both isobutanol and ARHC emit more NOx and PM2.5 than petroleum gasoline.Improving the energy efficiency and lowering air emissions from agricultural equipment will reduce the life-cycle air pollutant emissions of these bio-blendstocks.

techno-economic analysis, life-cycle analysis, bio↗

Long-lived light mediator to dark matter and primordial small scale spectrum

We calculate the early universe evolution of perturbations in the dark matter energy density in the context of simple dark sector models containing a GeV scale light mediator. We consider the case that the mediator is long-lived, with lifetime up to a second, and before decaying it temporarily dominates the energy density of the universe. We show that for primordial perturbations that enter the horizon around this period, the interplay between linear growth during matter domination and collisional damping can generically lead to a sharp peak in the spectrum of dark matter density perturbation. As a result, the population of the smallest DM halos gets enhanced. Possible implications of this scenario are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonperturbative QCD Coupling and its $\beta$-function from Light-Front Holography

The light-front holographic mapping of classical gravity in AdS space, modified by a positive-sign dilaton background, leads to a non-perturbative effective coupling $\alpha_s^{AdS}(Q^2)$. It agrees with hadron physics data extracted from different observables, such as the effective charge defined by the Bjorken sum rule, as well as with the predictions of models with built-in confinement and lattice simulations. It also displays a transition from perturbative to nonperturbative conformal regimes at a momentum scale $ \sim 1$ GeV. The resulting $\beta$-function appears to capture the essential characteristics of the full $\beta$-function of QCD, thus giving further support to the application of the gauge/gravity duality to the confining dynamics of strongly coupled QCD. Commensurate scale relations relate observables to each other without scheme or scale ambiguity. In this paper we extrapolate these relations to the nonperturbative domain, thus extending the range of predictions based on $\alpha_s^{AdS}(Q^2)$.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carrier recombination mechanisms and efficiency droop in GaInN/GaN light-emitting diodes

In this work, we model the carrier recombination mechanisms in GaInN/GaN light-emitting diodes as R=An+Bn 2 +Cn 3 +f(n), where f(n) represents carrier leakage out of the active region. The term f(n) is expanded into a power series and shown to have higher-than-third-order contributions to the recombination. The total third-order nonradiative coefficient (which may include an f(n) leakage contribution and an Auger contribution) is found to be 8×10 -29 cm 6 s -1 . Finally, comparison of the theoretical ABC+f(n) model with experimental data shows that a good fit requires the inclusion of the f(n) term.

36 MATERIALS SCIENCE↗

Optical performance of top-down fabricated InGaN/GaN nanorod light emitting diode arrays

Vertically aligned InGaN/GaN nanorod light emitting diode (LED) arrays were created from planar LED structures using a new top-down fabrication technique consisting of a plasma etch followed by an anisotropic wet etch. The wet etch results in straight, smooth, well-faceted nanorods with controllable diameters and removes the plasma etch damage. 94% of the nanorod LEDs are dislocation-free and a reduced quantum confined Stark effect is observed due to reduced piezoelectric fields. Despite these advantages, the IQE of the nanorod LEDs measured by photoluminescence is comparable to the planar LED, perhaps due to inefficient thermal transport and enhanced nonradiative surface recombination.

42 ENGINEERING↗

National Synchrotron Light Source II storage ring vacuum systems

The National Synchrotron Light Source II, completed in 2014, is a 3-GeV synchrotron radiation (SR) facility at Brookhaven National Laboratory and has been in steady operation since. With a design electron current of 500 mA and subnanometer radians horizontal emittance, this 792-m circumference storage ring is providing the highest flux and brightness x-ray beam for SR users. The majority of the storage ring vacuum chambers are made of extruded aluminium. Chamber sections are interconnected using low-impedance radiofrequency shielded bellows. SR from the bending magnets is intercepted by water-cooled compact photon absorbers resided in the storage ring chambers. This paper presents the design of the storage ring vacuum system, the fabrication of vacuum chambers and other hardware, the installation, the commissioning, and the continuing beam conditioning of the vacuum systems.

43 PARTICLE ACCELERATORS↗

Black silicon solar thin-film microcells integrating top nanocone structures for broadband and omnidirectional light-trapping

Recently developed classes of monocrystalline silicon solar microcells (μ-cell) can be assembled into modules with characteristics (i.e., mechanically flexible forms, compact concentrator designs, and high-voltage outputs) that would be impossible to achieve using conventional, wafer-based approaches. In this paper, we describe a highly dense, uniform and non-periodic nanocone forest structure of black silicon (bSi) created on optically-thin (30 μm) μ-cells for broadband and omnidirectional light-trapping with a lithography-free and high-throughput plasma texturizing process. With optimized plasma etching conditions and a silicon nitride passivation layer, black silicon μ-cells, when embedded in a polymer waveguiding layer, display dramatic increases of as much as 65.7% in short circuit current, as compared to a bare silicon device. Here, the conversion efficiency increases from 8.1% to 11.5% with a small drop in open circuit voltage and fill factor.

79 ASTRONOMY AND ASTROPHYSICS↗

Increased light-use efficiency in northern terrestrial ecosystems indicated by CO 2 and greening observations: INCREASE IN NH LIGHT USE EFFICIENCY

Observations show an increasing amplitude in the seasonal cycle of CO2 (ASC) north of 45°N of 56 ± 9.8% over the last 50 years and an increase in vegetation greenness of 7.5–15% in high northern latitudes since the 1980s. However, the causes of these changes remain uncertain. Historical simulations from terrestrial biosphere models in the Multiscale Synthesis and Terrestrial Model Intercomparison Project are compared to the ASC and greenness observations, using the TM3 atmospheric transport model to translate surface fluxes into CO2 concentrations. We find that the modeled change in ASC is too small but the mean greening trend is generally captured. Modeled increases in greenness are primarily driven by warming, whereas ASC changes are primarily driven by increasing CO2. We suggest that increases in ecosystem-scale light use efficiency (LUE) have contributed to the observed ASC increase but are underestimated by current models. We highlight potential mechanisms that could increase modeled LUE.

Thomas, Rebecca T.↗

Construction of multi-shelled Bi2WO6 hollow microspheres with enhanced visible light photo-catalytic performance

Highlights: • Bi{sub 2}WO{sub 6} with multi-shelled hollow microstructure was successfully fabricated and the use of ethylene glycol is a key factor. • Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} composite with multi-shelled hollow structure were also fabricated when concentration of solution was reduced. • Enhanced visible light photocatalytic performance was observed, which are believed due to the unique hollow microstructure. - Abstract: As a promising structure in enhancing the photo-catalytic performance of the materials, hollow-shell structure still faces the great challenge of constructing an effective architecture for catalytic application. Herein, multi-shelled hollow microspheres of the visible-light photo-catalyst Bi{sub 2}WO{sub 6} with shells up to the triple (BWO-MSH), have been synthesized by using a facile and effective carbonaceous template route. Intriguingly, the photo-catalytic reaction rate constant of BWO-MSH sample is nearly 16 times higher than the Bi{sub 2}WO{sub 6} prepared through solid-state reaction (BWO-SSR). The single-, double-shelled Bi{sub 2}WO{sub 6} microspheres (Broken) could only be synthesized with lower quality (synthesized with many broken species), and their photo-catalytic performance was nearly the same poor as the BWO-SSR sample. Furthermore, multi-shelled hollow microsphere of Bi{sub 2}O{sub 3}/Bi{sub 2}WO{sub 6} (BO/BWO-MSH) composite was also synthesized. The present work not only extends the scope of high-performance complex mixed metal oxides with multi-shelled microstructures, but also brings a good reference to engineer other impressive photo-catalyst.

36 MATERIALS SCIENCE↗

Collaborative development of diffraction-limited beamline optical systems at US DOE light sources

An ongoing collaboration among four US Department of Energy National Laboratories has demonstrated key technology prototypes and software modeling tools required for new high-coherent flux beamline optical systems. New free electron laser (FEL) and diffraction-limited storage ring (DLSR) light sources demand wavefront preservation from source to sample to achieve and maintain optimal performance. Fine wavefront control was achieved using a novel, roomtemperature cooled mirror system called REAL (resistive element adjustable length) that combines cooling with applied, spatially variable auxiliary heating. Single-grating shearing interferometry (also called Talbot interferometry) and Hartmann wavefront sensors were developed and used for optical characterization and alignment on several beamlines, across a range of photon energies. Demonstrations of non-invasive hard x-ray wavefront sensing were performed using a thin diamond single-crystal as a beamsplitter.

Goldberg, Kenneth A.↗

Slow light enhanced singlet exciton fission solar cells with a 126% yield of electrons per photon

Singlet exciton fission generates two triplet excitons per absorbed photon. It promises to increase the power extracted from sunlight without increasing the number of photovoltaic junctions in a solar cell. We demonstrate solar cells with an external quantum efficiency of 126% by enhancing absorption in thin films of the singlet exciton fission material pentacene. The device structure exploits the long photon dwell time at the band edge of a distributed Bragg reflector to achieve enhancement over a broad range of angles. Measuring the reflected light from the solar cell establishes a lower bound of 137% for the internal quantum efficiency.

14 SOLAR ENERGY↗

Computational Modeling to Limit the Impact Displays and Indicator Lights Have on Habitable Volume Operational Lighting Constraints

NASA has demonstrated an interest in improving astronaut health and performance through the installment of a new lighting countermeasure on the International Space Station. The Solid State Lighting Assembly (SSLA) system is designed to positively influence astronaut health by providing a daily change to light spectrum to improve circadian entrainment. Unfortunately, existing NASA standards and requirements define ambient light level requirements for crew sleep and other tasks, yet the number of light-emitting diode (LED) indicators and displays within a habitable volume is currently uncontrolled. Because each of these light sources has its own unique spectral properties, the additive lighting environment ends up becoming something different from what was planned or researched. Restricting the use of displays and indicators is not a solution because these systems provide beneficial feedback to the crew. The research team for this grant used computer-based computational modeling and real-world lighting mockups to document the impact that light sources other than the ambient lighting system contribute to the ambient spectral lighting environment. In particular, the team was focused on understanding the impacts of long-term tasks located in front of avionics or computer displays. The team also wanted to understand options for mitigating the changes to the ambient light spectrum in the interest of maintaining the performance of a lighting countermeasure. The project utilized a variety of physical and computer-based simulations to determine direct relationships between system implementation and light spectrum. Using real-world data, computer models were built in the commercially available optics analysis software Zemax Optics Studio(c). The team also built a mockup test facility that had the same volume and configuration as one of the Zemax models. The team collected over 1200 spectral irradiance measurements, each representing a different configuration of the mockup. Analysis of the data showed a measurable impact on ambient light spectrum. This data showed that obvious design techniques exist that can be used to bind the ambient light spectrum closer to the planned spectral operating environment for the observer's eye point. The following observations should be considered when designing an operational environment that is dominated by computer displays. When more light is directed into the field of view of the observer, the greater the impact it will make on various human factors issues that depend on spectral shape and intensity. Because viewing angle has a large part to play in the amount of light flux on the crewmember's retina, beam shape, combined with light source location is an important factor for determining percent probable incident flux on the observer from any combination of light sources. Computer graphics design and display lumen output are major factors influencing the amount of spectrally intense light projected into the environment and in the viewer's direction. Use of adjustable white point display software was useful only if the predominant background color was white and if it matched the ambient light system's color. Display graphics that used a predominantly black background had the least influence on unplanned spectral energy projected into the environment. Percent reflectance makes a difference in total energy reflected back into an environment, and within certain architectural geometries, reflectance can be used to control the amount of a light spectrum that is allowed to perpetuate in the environment. Data showed that room volume and distance from significant light sources influence the total spectrum in a room. Smaller environments had a homogenizing effect on total light spectrum, whereas light from multiple sources in larger environments was less mixed. The findings indicated above should be considered when making recommendations for practice or standards for architectural systems. The ambient lighting system, surface reflectance, and display and indicator implementation all factor into the users' spectral environment. A variety of low-cost solutions exist to mitigate the impact of light from non-architectural lighting systems, and much potential for system automation and integration of display systems with the ambient environment. This team believes that proper planning can be used to avoid integration problems and also believes that human-in-the-loop evaluations, real-world test and measurement, and computer modeling can be used to determine how changes to a process, display graphics, and architecture will help maintain the planned spectral operating lighting environment.

Clark, T. A.↗

New Light-Harvesting Materials Using Accurate and Efficient Bandgap Calculations

Electronic bandgap calculations are presented for 2400 experimentally known materials from the Materials Project database and the bandgaps, obtained with different types of functionals within density functional theory and (partial) self-consistent GW approximation, are compared for 20 randomly chosen compounds forming an unconventional set of ternary and quaternary materials. It is shown that the computationally cheap GLLB-SC potential gives results in good agreement (around 15%) with the more advanced and demanding eigenvalue-self-consistent GW. This allows for a high-throughput screening of materials for different applications where the bandgaps are used as descriptors for the efficiency of a photoelectrochemical device. Here, new light harvesting materials are proposed to be used in a one-photon photoelectrochemical device for water splitting by combining the estimation of the bandgaps with the stability analysis using Pourbaix diagrams and with the evaluation of the position of the band edges. Using this methodology, 25 candidate materials are obtained and 5 of them appear to have a realistic possibility of being used as photocatalyst in a one-photon water splitting device.

36 MATERIALS SCIENCE↗