Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “kinetic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Second Generation Readout For Large Format Photon Counting Microwave Kinetic Inductance Detectors

We present the development of a second generation digital readout system for photon counting microwave kinetic inductance detector (MKID) arrays operating in the optical and near-infrared wavelength bands. Our system retains much of the core signal processing architecture from the first generation system but with a significantly higher bandwidth, enabling the readout of kilopixel MKID arrays. Each set of readout boards is capable of reading out 1024 MKID pixels multiplexed over 2 GHz of bandwidth; two such units can be placed in parallel to read out a full 2048 pixel microwave feedline over a 4 GHz–8 GHz band. As in the first generation readout, our system is capable of identifying, analyzing, and recording photon detection events in real time with a time resolution of order a few microseconds. Here, we describe the hardware and firmware, and present an analysis of the noise properties of the system. We also present a novel algorithm for efficiently suppressing IQ mixer sidebands to below −30 dBc.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

The Development of Kinetic and Radiation Hydrodynamics Modeling of Thermonuclear Burn Propagation in Isochoric p - 11 B Through the Support of the INFUSE Program

The report summarizes DOE INFUSE-supported work between HB11 Energy and the University of Rochester’s TriForce Institute to improve computational modeling of advanced fusion fuels, especially proton–boron-11 (p- 11 B). The project extended the TriForce particle-in-cell/Monte Carlo collision code to include physics needed for dense, high-temperature p- 11 B burn studies, including p- 11 B fusion reactions, three-alpha-particle reaction products, relativistic Coulomb collisions, large-angle nuclear scattering, bremsstrahlung radiation, inverse bremsstrahlung absorption, and photon transport. The upgraded models were verified against focused physics tests and against known deuterium–tritium burn behavior. The study then used one-dimensional spherical simulations to estimate the conditions required for thermonuclear burn propagation in isochoric p- 11 B fuel. The calculations found that burn propagation is possible in the model, but only under very extreme hot-spot conditions, such as about 7000 g/cm 3 at 500 keV or 9000 g/cm 3 at 300 keV for a 20-micron hot spot. These conditions are much more demanding than current demonstrated inertial confinement fusion hot spots. The report concludes that the INFUSE collaboration successfully advanced kinetic and radiation modeling capabilities for p- 11 B fusion and provided useful estimates of ignition requirements. However, the simulated fuel gains remain below what would be needed for practical inertial fusion energy, and further work is needed to reconcile differences among kinetic, radiation-hydrodynamic, and analytic models and to identify more achievable target designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Electrochemical Study on the Kinetic Properties of Fe 2+ /Fe, Ni 2+ /Ni, Cr 2+ /Cr and Cr 3+ /Cr 2+ in Molten MgCl 2 -KCl-NaCl Salts

Here, the fundamental kinetic parameters of corrosion product ions (Fe, Ni and Cr ions) are of significant importance to understand the corrosion mechanisms of the structural materials in the molten salts. In the present study, the fundamental data of Fe 2+ , Ni 2+ , Cr 2+ and Cr 3+ (diffusion coefficient D, exchange current density i 0 , charge transfer coefficient α, limiting current density i L and standard rate constant k0) were measured at different concentrations (1.53 × 10 –6 –7.48 × 10 –4 mol cm –3 ) and temperatures (600 °C–800 °C). The values of D are independent of concentrations and follow Arrhenius law with temperature, which descend in the order of D Cr 2+ > D Fe 2+ > D Cr 3+ > D Ni 2+ with values ranging from 0.94 × 10 –5 to 3.31 × 10 –5 cm 2 s –1 . Both i 0 and k 0 depend on the temperatures, which also follow Arrhenius law.

14 SOLAR ENERGY↗
DOE OSTI2026

Data for KETCHUP: Parameterizing of Large-Scale Kinetic Models Using Multiple Datasets with Different Reference States

Repository for Kinetic Estimation Tool Capturing Heterogeneous Datasets Using Pyomo (KETCHUP), a flexible parameter estimation tool that leverages a primal-dual interior-point algorithm to solve a nonlinear programming (NLP) problem that identifies a set of parameters capable of recapitulating the steady-state fluxes and concentrations in wild-type and perturbed metabolic networks. KETCHUP can use K-FIT [2] input files. Example K-FIT input files are located in the K-FIT repository at https://github.com/maranasgroup/K-FIT.

Metabolomics↗
DOE OSTI2023

Low-Temperature Plasma Assisted Kinetics Study of Ethanol

Non-equilibrium plasma assisted kinetics of ethanol at 0.5 atm over a temperature range of 523-1203 K were studied at stoichiometric conditions by using a plasma flow reactor (PFR). The effects of plasma chemistry on fuel and its influence on neutral chemistry is decoupled with both experimental and modelling efforts. Enhanced reactivity was observed experimentally in both plasma-assisted oxidation and pyrolysis cases with fuel consumption beginning at temperatures as low as 523 K. Absolute fuel consumption was observed at temperatures nearly 200 K earlier than pure thermal reactions highlighting the effectiveness of non-equilibrium plasma to promote reactivity. Furthermore, modelling results illustrated the effect of electron impact reactions towards accelerating fuel consumption and promoting low temperature chemistry by generating excited state N2 and reactive O and OH radicals.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Kinetic Monte Carlo Tool for Kinetic Modeling of Linear Step-Growth Polymerization: Insight into Recycling of Polyurethanes

A kinetic Monte Carlo model of polyurethane polymerization which explicitly tracks the polymer sequences is developed and shared. Here this model is benchmarked against theoretical and experimental polyurethane data and used to investigate the effect on oligomer distributions of unequal reactivity of the first and second isocyanate to react. The reverse reactions using thermodynamic consistency are then added to the framework, and analogous to the addition polymerization concept of ceiling temperature, equilibrium chain length distributions at various temperatures are calculated. For a mixture of three monomers AA, BB, and CC, where BB and CC do not react with one another, are present in stoichiometric proportions, and have different enthalpies of reaction with AA, an odd-even effect emerges. Odd length chains are more likely than even length chains for temperatures at which BB and CC have significantly different equilibrium conversions. The concept of ceiling temperature that is typically cited for addition polymers is extended here to provide a measure of conditions under which depolymerization for recycling is favored.

condensation polymerization↗
DOE OSTI2022

Modified Energy Span Analysis Reveals Heterogeneous Catalytic Kinetics

Mechanistic modeling is a cornerstone of catalyst development generally conducted with microkinetic models or density functional theory-based energy profiles. We extend the energy span model of homogeneous catalysis to heterogeneous systems by introducing the modified energy span analysis (MESA) model by implementing collision theory and gas-phase concentration effects. We determine analytically turnover frequencies, coverages, rate-determining steps, apparent activation energies, and reaction orders in agreement with microkinetic and kinetic Monte Carlo simulations. The model applies to discrete catalyst state systems, including single-atom catalysts, homogeneous systems, and microporous materials. A generalizable rate expression is derived for reactor modeling or mechanistic insights from solely experimentally measured reaction orders. Here, we illustrate MESA on three published mechanisms and reveal unexpected phenomena absent in traditional energy span profiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Kinetics of 2-Methylfuran Acylation with Fatty Acid Anhydrides for Biorenewable Surfactants

Friedel–Crafts acylation using long-chain fatty acid derivatives and biomass-derived furans is the key reaction to produce “alkyl furan ketones”, an important precursor for biorenewable oleo-furan surfactants. In this work, the steady-state acylation kinetics and reaction mechanism were investigated using a model system of 2-methylfuran and n-octanoic anhydride in a fixed-bed tubular reactor using Al-MCM-41, a mesoporous aluminosilicate. An apparent activation energy (15.5 ± 1.4 kcal mol –1 ) was obtained for the formation of the acylated product, 2-octanoyl-5-methylfuran (2O5MF), for a temperature range of 348–408 K. Furthermore, the apparent reaction rate orders were ~0.6 and ~0.5 in the 2-methylfuran and anhydride concentrations, respectively, while near-zero apparent rate orders were measured in the product concentrations, indicating negligible product inhibition. An Eley–Rideal catalytic acylation mechanism was proposed to explain the experimentally observed apparent rate orders.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

General Kinetic Model for pH Dependence of Proton-Coupled Electron Transfer: Application to an Electrochemical Water Oxidation System

The pH dependence of proton-coupled electron transfer (PCET) reactions, which are critical to many chemical and biological processes, is a powerful probe for elucidating their fundamental mechanisms. Herein, a general, multichannel kinetic model is introduced to describe the pH dependence of both homogeneous and electrochemical PCET reactions. According to this model, a weak pH dependence can arise from the competition among multiple sequential and concerted PCET channels involving different forms of the redox species, such as protonated and deprotonated forms, as well as different proton donors and acceptors. The contribution of each channel is influenced by the relative populations of the reactant species, which often depend strongly on pH, leading to complex pH dependence of PCET apparent rate constants. This model is used to explain the origins of the experimentally observed weak pH dependence of the electrochemical PCET apparent rate constant for a ruthenium-based water oxidation catalyst attached to a tin-doped In2O3 (ITO) surface. The weak pH dependence is found to arise from the intrinsic differences in the rate constants of participating channels and the dependence of their relative contributions on pH. This model predicts that the apparent maximum rate constant will become pH-independent at higher pH, which is confirmed by experimental measurements. Our analysis also suggests that the dominant channels are electron transfer at lower pH and sequential PCET via electron transfer followed by fast proton transfer at higher pH. Furthermore, this work highlights the importance of considering multiple competing channels simultaneously for PCET processes.

Catalysts↗
DOE OSTI2024

Kinetic Plasma Simulation in the MOOSE Framework: Verification of Electrostatic Particle In Cell Capabilities

In magnetic confinement nuclear fusion reactors, the interaction between the plasma edge and plasma facing components is extremely important. At the plasma edge, a kinetic representation such as particle-in-cell (rather than a fluid representation) is required to accurately capture the plasma behavior. General purpose particle-in-cell plasma simulation capabilities have been developed in the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework. This new capability is a part of the development of a new MOOSE-based framework for modeling plasma facing components, the Fusion ENergy Integrated multiphys-X (FENIX) framework. In this work, the verification of foundational particle-in-cell capabilities in FENIX is presented. This new plasma simulation capability has three main components: moving particles in discrete steps on the finite element mesh, mapping charge density from the particle's location to the finite element mesh, and solving for the electrostatic potential based on the charge density mapped from particles to the mesh. In this paper, simple verification problems demonstrating each of these new capabilities are presented, and future work includes electromagnetic capabilities and Monte Carlo collisions with neutral gas particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Evaluation of sucrose crystallization kinetics using confocal microscopy: Determining differences in sucrose crystallization kinetics between single and polycrystal studies

Sucrose solution crystal growth kinetics are dependent on temperature, concentration, and impurities. A double polarized confocal microscopy system was used to obtain photographs with high contrast between growing crystals and the background for color background removal image processing. Seeded solutions of 72 wt% sucrose at 27, 35, 45, and 55°C were compared for single and polycrystals. Polycrystal analysis was determined to offer more rapid image processing and to be more applicable to systems in real operating conditions, while single-crystal analysis was determined to give more comprehensive descriptions of individual crystal behavior at the cost of slower processing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemical Kinetics of the Autoxidation of Poly(ethylenimine) in CO 2 Sorbents

The oxidative degradation rates of a CO 2 sorbent composed of a mesoporous alumina impregnated with poly- (ethylenimine) (PEI) are measured under systematically varied conditions and a reaction rate law is created. Good agreement is shown between the rate of oxidation obtained via in situ calorimetric heat measurement during oxidative degradation reactions and the loss of CO 2 capture performance presented as amine efficiency (mol CO 2 /mol amine). PEI mass loss and elemental composition are tracked over the course of the reaction and used in conjunction with the oxidation rate measurements to shed insight into the oxidation reaction(s). These data, in combination with measurements of the heat of reaction, suggest a common reaction set across the range of temperatures, oxygen concentrations, and sorbent compositions tested. The data are consistent with the basic autoxidation scheme (BAS), the accepted mechanism of autoxidation of aliphatic polymers. We propose a lumped kinetic model to describe the oxidation reaction set and estimate an activation energy of 105 kJ/mol and an oxygen reaction order of 0.5–0.7 from the data accordingly. Furthermore, these parameters can be incorporated into process cycle models to estimate the material lifetime, a critical uncertainty in the deployment of DAC technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular Weight Dependence of Block Copolymer Micelle Fragmentation Kinetics

The effect of molecular weight (M) on the fragmentation kinetics of micelles formed by 1,2-polybutadiene-block-poly(ethylene oxide) (PB-PEO) copolymers was studied in the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. A series of six samples, with total M ranging from 10 4 to 10 5 g mol –1 and nearly constant composition (f PEO ≈ 0.4), were examined; all six formed spherical micelles with PEO coronas. Nonequilibrium PB-PEO micelles were prepared by direct dissolution, a process that systematically produces nanoparticles with mean aggregation numbers more than twice the equilibrium values. When subjected to high temperature annealing (170 °C), the average micelle radius was found to decrease substantially, as determined by temperature-jump dynamic light scattering (T-jump DLS) and time-resolved small-angle X-ray scattering (TR-SAXS). Furthermore, the characteristic fragmentation times (τ) were found to increase strongly with increasing degree of polymerization N, as τ ~ N 1.8 . This result compares favorably with the prediction of a previously untested model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗