SEARCH · Engineering Papers

Results for “jitter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1995

Spacecraft Jitter Attenuation Using Embedded Piezoelectric Actuators

Remote sensing from spacecraft requires precise pointing of measurement devices in order to achieve adequate spatial resolution. Unfortunately, various spacecraft disturbances induce vibrational jitter in the remote sensing instruments. The NASA Langley Research Center has performed analysis, simulations, and ground tests to identify the more promising technologies for minimizing spacecraft pointing jitter. These studies have shown that the use of smart materials to reduce spacecraft jitter is an excellent match between a maturing technology and an operational need. This paper describes the use of embedding piezoelectric actuators for vibration control and payload isolation. In addition, recent advances in modeling, simulation, and testing of spacecraft pointing jitter are discussed.

Belvin, W. Keith↗

NASA NTRS2002

Effect of Magnetic Fields on g-jitter Induced Convection and Solute Striation During Space Processing of Single Crystals

A 2-D finite element model is presented for the melt growth of single crystals in a microgravity environment with a superimposed DC magnetic field. The model is developed based on the deforming finite element methodology and is capable of predicting the phenomena of the steady and transient convective flows, heat transfer, solute distribution, and solid-liquid interface morphology associated with the melt growth of single crystals in microgravity with and without an applied magnetic field. Numerical simulations were carried out for a wide range of parameters including idealized microgravity conditions, the synthesized g-jitter and the real g-jitter data taken by on-board accelerometers during space flights. The results reveal that the time varying g-jitter disturbances, although small in magnitude, cause an appreciable convective flow in the liquid pool, which in turn produces detrimental effects during the space processing of single crystal growth. An applied magnetic field of appropriate strength, superimposed on microgravity, can be very effective in suppressing the deleterious effects resulting from the g-jitter disturbances.

deGroh, H. C.↗

NASA NTRS2019

TSIS Experiences with ISS Jitter from Inception to On-Orbit Operation

The TSIS instrument has been measuring solar irradiance on a continual basis since January 2018 as an external payload on the ISS. In 2014 when TSIS was directed to fly on the ISS, the jitter environment was highly uncertain, so TSIS designed a robust gimbaled pointing system that showed excellent disturbance attenuation throughout the design, test, and on-orbit phases of the program. This paper discusses how TSIS accounted for this uncertain jitter environment through-out the life of the program.TSIS was able to measure the ISS jitter during commissioning and determined that it was a relatively benign environment less than 4 arcseconds 1σ at low frequencies (<0.5 Hz). More importantly, the measured pointing performance of TSIS was consistently found to be 4 arcseconds 1σ, which easily satisfied the jitter requirement of 60 arcseconds 1σ.

solar irradiance instrument↗

NASA NTRSDate not supplied

Spacecraft Line-Of-Sight Jitter Mitigation and Management Lessons Learned and Engineering Best Practices

Predicting, managing, controlling, and testing spacecraft line-of-sight (LoS) jitter caused by micro-vibrations due to onboard internal disturbance sources is a formidable multidisciplinary engineering task. It is especially challenging for those missions hosting high-performance, vibration-sensitive optical sensor payloads with stringent pointing stability requirements. Both NASA and ESA are planning technically aggressive spaceflight missions that include ultra-high-performance optical payloads with delicate, highly vibration-sensitive scientific and observational instruments. The GN&C community of practice will need to leverage and build upon their collective experiences and lessons learned to better address future micro-vibration challenges. To identify lessons learned and best engineering practices the NASA Engineering & Safety Center (NESC) sponsored a two-day Spacecraft LoS Jitter Workshop in late 2019. The workshop’s goal was to provide a multidisciplinary forum to elicit deeper understanding of the issues related to solving the spacecraft LoS jitter/micro-vibration problem. A primary objective was to identify and share best practices, rules of thumb, and options for jitter-related activities. Representatives from NASA, JPL, ESA, along with NASA’s industrial partners, independent consultant subject matter experts, and members of academia participated in the workshop. This paper will describe the motivation for the NASA Spacecraft LoS Jitter Workshop and summarize the identified findings, observations, and recommendations.

Lessons Learned;↗

DOE OSTI2024

A Suppression-based STDP Rule Resilient to Jitter Noise in Spike Patterns for Neuromorphic Computing

Multi-spike models of synaptic plasticity, such as the triplet and suppression spike-timing-dependent plasticity (STDP) rules, exhibit better alignment with neurophysiological data in the brain compared to the pair-based STDP rule. Previous studies have empirically shown that the pair-based STDP rule can detect spatiotemporal spike patterns hidden in equally dense distractor spike trains in an unsupervised manner. However, it fails to detect spike patterns influenced by jitter noise. Given that spiking neural networks (SNNs) exhibit variability in generated spike trains in response to the same inputs, it becomes imperative to have learning rules capable of detecting spike patterns even in the presence of jitter noise. In this study, we introduce a simplified suppression-based STDP rule that demonstrates significantly enhanced tolerance to jitter in spike patterns compared to the pair-based STDP rule. Unlike the ideal suppression STDP rule, characterized by an exponential learning window and requiring high-resolution synapses, the simplified rule limits the synaptic efficacy update to a single bit at any given instant. Moreover, it employs 4-bit fixed-point synapses, facilitating straightforward implementation in neuromorphic hardware.

Gautam, Ashish [ORNL]↗

NASA NTRS1975

Space processing convection evaluation - G-jitter convection of confined fluids in low gravity

G-jitter convection, caused by time-varying accelerations imparted on a heated container of fluid in low gravity, is investigated analytically. The mathematical model used is constructed from the Navier-Stokes equations which are solved with a finite-difference method on a digital computer. Results are presented for typical space processing configurations and anticipated g-jitter levels, with emphasis on sounding rocket applications. The calculations indicate that g-jitter can cause significant temperature oscillations, increase or decrease local heat transfer and produce oscillatory convective flow patterns. These factors can have significant effects on important processes such as crystal growth (banding, for example) and separation techniques.

Spradley, L. W.↗

NASA NTRS1982

Jitter in SS 433-A clue to the collimation mechanism

The blue and red shift jitter observed in SS 433 is examined with a view to determining its sources. The jitter is characterized by a Delta-z rms amplitude of 0.01, corresponding to a 3000 km/sec Doppler velocity, which is larger than either the width or the error of measurement of the shifted lines. In addition, the amplitude of the jumps is not strongly dependent on the phase in the 164-day cycle, and the amplitudes of the jitter in the redshifted and blueshifted branches are comparable. It is shown that these features set strong constraints on models proposed for SS 433 by Sarazin et al. (1980), Katz (1980), and Van den Heuvel et al. (1980).

Katz, J. I.↗

NASA NTRS1989

Effect of G-jitters on the stability of rotating bubble under microgravity environment

The instability of liquid and gas interface can be induced by the pressure of longitudinal and lateral accelerations, vehicle vibration, and rotational fields of spacecraft in a microgravity environment. Characteristics of slosh waves excited by the restoring force field of gravity jitters have been investigated. Results show that lower frequency gravity jitters excite slosh waves with higher ratio of maximum amplitude to wave length than that of the slosh waves generated by the higher frequency gravity jitters.

Hung, R. J.↗

NASA NTRS1990

Gravity-jitters and excitation of slosh waves

Hung, R. J.↗

NASA NTRS1990

Zero-crossing detector with sub-microsecond jitter and crosstalk

A zero-crossing detector (ZCD) was built and tested with a new circuit design which gives reduced time jitter compared to previous designs. With the new design, time jitter is reduced for the first time to a value which approaches that due to noise in the input amplifying stage. Additionally, with fiber-optic transmission of the output signal, crosstalk between units has been eliminated. The measured values are in good agreement with circuit noise calculations and approximately ten times lower than that for ZCD's presently installed in the JPL test facility. Crosstalk between adjacent units was reduced even more than the jitter.

Dick, G. John↗

NASA NTRS1990

Stability and slosh wave for rotating bubble due to gravity-jitters under microgravity

Time-dependent fluid behaviors in microgravity environments are examined with particular attention given to the dynamics of bubble configurations. The initial bubble profiles, computed from the steady-state formulation, are used as the initial input for the time dependent computation. The parameters considered are liquid density and its kinematic viscosity, gas density and its kinematic viscosity, surface tension coefficient, angular velocity, and gravity environment. This computer algorithm can be used to simulate the fluid behavior in a microgravity environment, in particular the excitation of slosh waves due to different frequencies of gravity jitters. Results show that lower-frequency gravity jitters excite slosh waves with a higher ratio of maximum amplitude to wave length than that of the slosh waves generated by the higher frequency gravity jitters.

Hung, R. J.↗

NASA NTRS1991

Gravity jitter effected slosh waves and the stability of a rotating bubble under microgravity

The instability of liquid and gas interface can be induced by the pressure of longitudinal and lateral accelerations, vehicle vibration, and rotational fields of spacecraft in a microgravity environment. Characteristics of slosh waves excited by the restoring force field of gravity jitters have been investigated. Results show that lower frequency gravity jitters excite slosh wave with higher ratio of maximum amplitude to wave length than that of the slosh waves generated by the higher frequency gravity jitters.

Hung, R. J.↗

NASA NTRS1992

An examination of anticipated g-jitter on Space Station and its effects on materials processes

Information on anticipated g-jitter on Space Station Freedom and the effect of the jitter on materials processes is given in viewgraph form. It was concluded that g-jitter will dominate the acceleration environment; that it is a 3D multifrequency phenomenon; and that it varies dramatically in orientation. Information is given on calculated or measured sources of residual acceleration, aerodynamic drag, Shuttle acceleration measurements, the Space Station environment, tolerable g-levels as a function of frequency, directional solidification, vapor crystal growth, protein crystal growth, float zones, and liquid bridges.

Nelson, Emily↗

NASA NTRS1992

Effect of asymmetric gravity jitter excited slosh waves at liquid-vapor interface under microgravity

The dynamical behavior of fluids affected by the asymmetric gravity jitter oscillations, in particular the effect of surface tension on partially-filled rotating fluids (cryogenic liquid helium and helium vapor) in a sub-scale Gravity Probe-B Spacecraft propellant dewar tank imposed by time-dependent various directions of background gravity environment have been investigated. Results show that lower frequency gravity jitter imposed on the time-dependent variations of the direction of background gravity induced a greater amplitude of oscillations and a stronger degree of asymmetry in liquid-vapor interface geometry than that made by the higher frequency gravity jitter. Furthermore, the greater the components of background gravity in radial and circumferential directions will provide a greater contribution in driving more to the increasing amplitude and degrees of symmetry of liquid-vapor interface profiles which, in turn, modify the disturbance of moment of inertia and angular momentum of spacecraft.

Hung, R. J.↗

NASA NTRS1992

Three-dimensional spacecraft angular momentum fluctuations due to gravity jitter excited slosh waves in liquid propellant system

The paper investigates the dynamical behavior of fluids affected by asymmetric gravity jitter oscillations, in particular the effect of surface tension on partially filled rotating fluids (cryogenic liquid helium and helium vapor) in a subscale Gravity Probe-B spacecraft propellant dewar tank imposed by time-dependent variation in the direction of the background gravity environment. It is shown that lower frequency gravity jitter imposed on the time-dependent variation in the direction of background gravity induced a greater amplitude of oscillations and a stronger degree of asymmetry in liquid-vapor interface geometry than that made by the higher frequency gravity jitter. Fluctuations of angular momentum and spacecraft moment caused by slosh wave excitation are also studied. Slosh-wave-induced fluctuations in angular momentum and moment are important factors in spacecraft dynamics, guidance, and attitude controls.

Hung, R. J.↗

NASA NTRS1992

Asymmetric gravity jitter excited slosh waves at a liquid-vapor-solid interface in microgravity

The dynamical behavior of fluids affected by the asymmetric gravity jitter oscillations is investigated focusing on the surface tension effect on partially filled rotating fluids in a sub-scale gravity probe-B spacecraft propellant dewar tank. Data obtained revealed that the lower frequency gravity jitter imposed on the time-dependent variations of the background gravity direction induced a greater amplitude of oscillations and a stronger degree of asymmetry in liquid-vapor interface geometry than that caused by the higher frequency gravity jitter. It is also found that the greater the components of background gravity in radial and circumferential directions the greater the contribution to driving more toward increasing amplitude and degrees of asymmetry of the liquid-vapor interface profiles, which in turn modify the disturbance of moment of inertia and angular momentum of spacecraft.

Hung, R. J.↗

NASA NTRS1993

UARS in-flight jitter study for EOS

Response data collected from gyroscopes on board the Upper Atmosphere Research Satellite (UARS) provided a unique opportunity to analyze actual flight pointing jitter data. Flight modal frequencies and damping values are derived from the measured data using an Eigensystem Realization Algorithm (ERA). Flight frequencies at various solar array positions are compared to analytical predictions obtained with a Finite Element Model. The solar array modal frequencies change with position due to the modes acting about different spacecraft inertial axes. Higher order modes were difficult to identify due to the limited instrumentation. Future flight jitter studies on other spacecraft would be significantly aided by additional instrumentation. Spacecraft jitter due to continuous disturbance sources such as the 1.6 meter scanning microwave antenna, the solar array drive, and reaction wheels is presented. The solar array drive disturbance dominates the spacecraft response during normal operation.

Molnar, John↗

NASA NTRS1993

EOS instrument jitter assessment and mitigation

Instrument-induced pointing stability and jitter are significant design drivers for the Earth Observing System (EOS) AM spacecraft. Techniques for determining the rigid and flexible body pointing jitter contributions have been developed and applied to the EOS AM spacecraft. The contribution of each instrument on itself, on the spacecraft and on other instruments is addressed. Rigid body effects are separated from flexible body effects to allow focus on the localized vibrational jitter.

Ram, M.↗