Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high resolution microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Real-Time Observation of Water-Soluble Mineral Precipitation in Aqueous Solution by In Situ High-Resolution Electron Microscopy

The precipitation and dissolution of water-soluble minerals in aqueous systems is a familiar process occurring commonly in nature. Understanding mineral nucleation and growth during its precipitation is highly desirable, but past in situ techniques have suffered from limited spatial and temporal resolution. In this paper, by using in situ graphene liquid cell electron microscopy, mineral nucleation and growth processes are demonstrated in high spatial and temporal resolution. We precipitate the mineral thenardite (Na 2 SO 4 ) from aqueous solution with electron-beam-induced radiolysis of water. We demonstrate that minerals nucleate with a two-dimensional island structure on the graphene surfaces. We further reveal that mineral grains grow by grain boundary migration and grain rotation. Finally, our findings provide a direct observation of the dynamics of crystal growth from ionic solutions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-resolution electron microscopy observation and dislocation reaction mechanism of fivefold twinning in a Cu-rich precipitate in a cold rolled ferritic steel containing copper

Ferritic steels containing copper have been studied as model systems for clusters/precipitate formation in reactor pressure vessel steels. The samples were aged at 400 °C for 4000 h and subsequently cold rolled to 30% reduction at room temperature. The microstructural characteristics of the samples were analyzed using high-resolution transmission electron microscopy. Direct evidence was found that the fivefold twinning occurs via simultaneous emission of two Shockley partial dislocations from two particular α-Fe/Cu interfaces, and then the pileup tips of the twofold twin. - Highlights: • Fivefold twin is observed in a Cu-rich precipitate in cold rolled ferritic steels. • A dislocation reaction mechanism for the fivefold twin formation is proposed. • Two particular mismatching α-Fe/Cu-rich precipitate interfaces play a critical role.

36 MATERIALS SCIENCE↗

High resolution electron microscopy of GaAs capped GaSb nanostructures

We show in this work that GaAs capping of 2 ML of GaSb grown by molecular beam epitaxy results in the formation of very small (with heights of about 1 nm) GaAsxSb1 x nanostructures surrounded by a GaAs rich layer. This conclusion is obtained by analyzing the morphology of the GaAsxSb1 x nanostructures by high resolution scanning transmission electron microscopy in Z-contrast mode. This result shows that a significant fraction of the Sb atoms must segregate along the growth direction during the GaAs capping process.

36 MATERIALS SCIENCE↗

Nonaqueous sol-gel synthesis and growth mechanism of single crystalline TiO{sub 2} nanorods with high photocatalytic activity

In this paper, we report on a nonaqueous synthesis of single crystalline anatase TiO{sub 2} nanorods by reaction between TiCl{sub 4} and benzyl alcohol at a low temperature of 80 deg. C. The resulting samples were characterized with X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, nitrogen adsorption, X-ray photoelectron spectrometry and UV-vis diffuse reflectance spectroscopy. We proposed that the TiO{sub 2} nanorods were formed through an oriented attachment mechanism. More importantly, these single crystalline anatase TiO{sub 2} nanorods exhibited significantly higher photocatalytic activities than commercial photocatalyst P25. This study provides an environmentally friendly and economic approach to produce highly active TiO{sub 2} photocatalyst.

36 MATERIALS SCIENCE↗

In Vivo Entombment of Bacteria and Fungi during Calcium Oxalate, Brushite, and Struvite Urolithiasis

Human kidney stones form via repeated events of mineral precipitation, partial dissolution, and reprecipitation, which are directly analogous to similar processes in other natural and manmade environments, where resident microbiomes strongly influence biomineralization. High-resolution microscopy and high-fidelity metagenomic (microscopy-to-omics) analyses, applicable to all forms of biomineralization, have been applied to assemble definitive evidence of in vivo microbiome entombment during urolithiasis. Stone fragments were collected from a randomly chosen cohort of 20 patients using standard percutaneous nephrolithotomy (PCNL). Fourier transform infrared (FTIR) spectroscopy indicated that 18 of these patients were calcium oxalate (CaOx) stone formers, whereas one patient formed each formed brushite and struvite stones. This apportionment is consistent with global stone mineralogy distributions. Stone fragments from seven of these 20 patients (five CaOx, one brushite, and one struvite) were thin sectioned and analyzed using brightfield (BF), polarization (POL), confocal, super-resolution autofluorescence (SRAF), and Raman techniques. DNA from remaining fragments, grouped according to each of the 20 patients, were analyzed with amplicon sequencing of 16S rRNA gene sequences (V1–V3, V3–V5) and internal transcribed spacer (ITS1, ITS2) regions. Bulk-entombed DNA was sequenced from stone fragments in 11 of the 18 patients who formed CaOx stones, and the patients who formed brushite and struvite stones. These analyses confirmed the presence of an entombed low-diversity community of bacteria and fungi, including Actinobacteria, Bacteroidetes, Firmicutes, Proteobacteria, and Aspergillus niger. Bacterial cells approximately 1 μm in diameter were also optically observed to be entombed and well preserved in amorphous hydroxyapatite spherules and fans of needle-like crystals of brushite and struvite. In conclusion, these results indicate a microbiome is entombed during in vivo CaOx stone formation. Similar processes are implied for brushite and struvite stones. This evidence lays the groundwork for future in vitro and in vivo experimentation to determine how the microbiome may actively and/or passively influence kidney stone biomineralization.

59 BASIC BIOLOGICAL SCIENCES↗

Structural and optical characterization of CdS/TiO{sub 2} nanocomposite

Nanocomposites are advantageous because they can compensate for the disadvantages of the individual component, and induce a synergistic effect, such as an efficient charge separation and improvement of photostability. Present study reveals the advantage of nanocomposite CdS/TiO{sub 2} over TiO{sub 2} which have been prepared by a simple Co-precipitation method. The particle size of CdS/TiO{sub 2} estimated from X-ray diffraction pattern comes out to be {approx} 5.8 nm which is in good agreement with that of transmission electron microscopy. High resolution transmission electron microscopy showed a reduction in defect levels in the as prepared CdS/TiO{sub 2} nanocomposite in comparison to TiO{sub 2}. In our method titanium monoxide (TiO) phase has appeared at room temperature against the earlier reports. Williamson-Hall plot analysis revealed the presence of tensile strain in both the CdS/TiO{sub 2} and TiO{sub 2} samples. New Raman bands for rutile TiO{sub 2} have also been observed which have not been previously reported. UV-visible study reveals an enhanced absorption capability of the composite sample ({approx} 383.85 nm) in comparison to pure TiO{sub 2} ({approx} 331.37 and 324.40 nm).The optical and electrical results have shown the activation of the excited TiO{sub 2} in the presence of CdS. - Graphical Abstract: Nanocomposites are advantageous because they can compensate for the disadvantages of the individual component and induce a synergistic effect. Present study reveals the advantage of nanocomposite CdS/TiO{sub 2} over TiO{sub 2} prepared via simple Co-precipitation method. The optical and electrical results have shown the activation of the excited TiO{sub 2} in the presence of CdS. Research Highlights: {yields} Advantage of CdS/TiO{sub 2} over TiO{sub 2} prepared via Co-precipitation method. {yields} Appearance of positive slope has ensured the presence of tensile strain. {yields} New Raman bands for rutile TiO{sub 2} which has not been previously reported. {yields} Activation of the excited TiO{sub 2} in the presence of CdS rather than deactivation.

36 MATERIALS SCIENCE↗

In situ fabrication and characterization of cobalt ferrite nanorods/graphene composites

Cobalt ferrite nanorods/graphene composites were prepared by a one-step hydrothermal process using NaHSO{sub 3} as the reducing agent and 1-propyl-3-hexadecylimidazolium bromide as the structure growth-directing template. The reduction of graphene oxide and the in situ formation of cobalt ferrite nanorods were accomplished in a one-step reaction. The structure and morphology of as-obtained composites were characterized by field emission scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, atomic force microscope, X-ray diffractometer, Fourier transform infrared spectra, X-ray photoelectron spectroscopy and Raman spectroscopy. Uniform rod-like cobalt ferrites with diameters of about 100 nm and length of about 800 nm were homogeneously distributed on the graphene sheets. The hybrid materials showed a saturation magnetization of 42.5 emu/g and coercivity of 495.1 Oe at room temperature. The electromagnetic parameters were measured using a vector network analyzer. A minimum reflection loss (RL) of − 25.8 dB was observed at 16.1 GHz for the cobalt ferrite nanorods/graphene composites with a thickness of 2 mm, and the effective absorption frequency (RL < − 10 dB) ranged from 13.5 to 18.0 GHz. The composites exhibited better absorbing properties than the cobalt ferrite nanorods and the mixture of cobalt ferrite nanorods and graphene. - Highlights: • Reduction of GO and formation of ferrites were accomplished in a one-step reaction. • Ionic liquid was used to control 1D growth of ferrite nanorods for the first time. • Cobalt ferrite nanorods/graphene composites showed dielectric and magnetic loss. • Cobalt ferrite nanorods/graphene composites exhibited better absorbing properties.

36 MATERIALS SCIENCE↗

Analysis of integrity and microstructure of linear friction welded Waspaloy

Nickel-base superalloy, Waspaloy, was linear friction welded (LFWed) under different axial shortening conditions of 2.0, 3.4, and 4.6 mm. The tensile properties and microhardness of the weldments were investigated in the as-LFWed condition and compared with those in the post-weld heat treated (PWHTed) condition. Mechanical properties were related to microstructures following examination by optical microscopy, high resolution scanning electron microscopy, and electron backscatter diffraction (EBSD). Analyses of the EBSD results in terms of the misorientation angle distribution, which represents the stored energy, were performed. In the as-LFWed condition, the yield strength (YS) and ultimate tensile strength (UTS) increased with axial shortening due to greater expulsion of the softened interfacial material toward the periphery as flash. In contrast, with increasing axial shortening the total elongation initially remained constant and then decreased. This was also related to the expulsion of the softened interfacial material into the bifurcated flash. Extensive dissolution of the strengthening phase (γ′) in the weld area during linear friction welding (LFW) contributed to the lower YS and UTS in the as-welded condition compared to the PWHTed condition where the γ′ particles were recovered. After performing post-weld heat treatment (PWHT), the total elongation improved due to the relaxation of stored energy and grain growth in the thermomechanically affected zone (TMAZ). - Highlights: • Tensile property and microstructure in Waspaloy linear friction welds were studied. • Yield strength and ultimate tensile strength increased with axial shortening. • Elongation initially remained constant and then decreased with axial shortening. • Post-weld heat treat recovered dissolved γ′ particles and increased weld strength. • Stored energy relaxation during post-weld heat treatment improved weld elongation.

36 MATERIALS SCIENCE↗

Microstructural and optical properties of nanocrystalline ZnO deposited onto vertically aligned carbon nanotubes by physical vapor deposition

Nanocrystalline ZnO films with thicknesses of 5 nm, 10 nm, 20 nm, and 50 nm were deposited via magnetron sputtering onto the surface of vertically aligned multi-walled carbon nanotubes (MWCNTs). The ZnO/CNTs heterostructures were characterized by scanning electron microscopy, high resolution transmission electron microscopy, and X-ray diffraction studies. No structural degradation of the CNTs was observed and photoluminescence (PL) measurements of the nanostructured ZnO layers show that the optical properties of these films are typical of ZnO deposited at low temperatures. The results indicate that magnetron sputtering is a viable technique for growing heterostructures and depositing functional layers onto CNTs.

36 MATERIALS SCIENCE↗

Single crystalline multi-petal Cd nanoleaves prepared by thermal reduction of CdO

Highlights: ► Cd nanoleaves are obtained on abraded Cu substrate by thermal reduction of CdO. ► Vapour solid (VS) growth mechanism governs the formation of Cd nanoleaves (CdNLs). ► PL spectrum for CdNLs exhibits a strong ultraviolet (UV) emission band at 353 nm. ► UV band is attributed to interband radiative recombination under Xe illumination. -- Abstract: Multi-petal cadmium metal nanoleaves with 30–40 nm thickness were fabricated on abraded copper substrate by simple thermal reduction of cadmium oxide (CdO) powder at 1050 °C inside horizontal tube furnace (HTF) under nitrogen gas flow. The structural, compositional and morphological characterizations of the as-prepared cadmium nanoleaves (CdNLs) were performed by X-ray diffraction, energy dispersive X-ray spectroscopy, scanning electron microscopy, high resolution transmission electron microscopy and selected area electron diffraction. Non-catalytic vapour–solid (VS) process based growth mechanism governing the formation of CdNLs has been proposed and discussed briefly. Photoluminescence (PL) spectrum for CdNLs measured at room temperature exhibited a single prominent emission band at 353 nm which may either be ascribed to surface oxidation effects or interband radiative recombination under Xe light illumination.

36 MATERIALS SCIENCE↗

Synthesis of MoO{sub 3} nanoparticles for azo dye degradation by catalytic ozonation

Highlights: • Synthesis of one-dimensional MoO{sub 3} nanostructures using hydrothermal, microwave, and sonochemical methods. • Sonochemical synthesized MoO{sub 3} presents the best efficiency for the dye removal by catalytic ozonation. • Efficient environmental remediation process. - Abstract: One-dimensional molybdenum trioxide nanostructures were prepared in three different approaches, including thermal, microwave, and sonochemical methods. The physicochemical properties of the obtained MoO{sub 3} nanoparticles were investigated by diffused reflectance spectroscopy, X-ray diffraction analysis, field emission scanning electron microscopy, high resolution transmission electron microscopy, and Brunauer–Emmett–Teller surface area analysis. Among the methods as investigated, sonochemical synthesis gave well-dispersed fine MoO{sub 3} nanoparticles compared with the other approaches. All the synthesized MoO{sub 3} nanostructures were examined for the catalytic ozonation to degrade azo dye in aqueous environment. Different performances were obtained for the catalyst prepared in different methods and the catalytic efficiencies were found to be the order of sonochemical, microwave, and then thermal methods. The sonochemical MoO{sub 3} catalyst allowed the total dye removal within 20 min and its good performance was justified according to their higher surface area with higher number of active sites that provide effective dye interaction for better degradation.

36 MATERIALS SCIENCE↗

Enhanced thermal conductivity of polycrystalline aluminum nitride thin films by optimizing the interface structure

The growth-temperature dependency and interface structure effects on the thermal conductivity of the highly textured AlN thin films on (001) Si substrates were systematically studied by characterizing the crystal structures, surface morphologies, interface structures, chemical compositions, and thermal conductivity using x-ray diffraction analysis, atomic force microscopy, high resolution transmission electron microscopy, x-ray photoelectron spectroscopy, and 3-omega method, respectively. By optimizing the interface microstructure and the growth temperature, thermal conductivity of polycrystalline AlN thin films can be greatly enhanced from 9.9 to 26.7 W/mK, when the growth temperature increases from 330 to 560 Degree-Sign C. This achievement is considered to be associated with the diminishment of the amorphous and disordered layer at the AlN/Si interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of oxygen plasma on field emission characteristics of single-wall carbon nanotubes grown by plasma enhanced chemical vapour deposition system

Field emission properties of single wall carbon nanotubes (SWCNTs) grown on iron catalyst film by plasma enhanced chemical vapour deposition system were studied in diode configuration. The results were analysed in the framework of Fowler-Nordheim theory. The grown SWCNTs were found to be excellent field emitters, having emission current density higher than 20 mA/cm{sup 2} at a turn-on field of 1.3 V/μm. The as grown SWCNTs were further treated with Oxygen (O{sub 2}) plasma for 5 min and again field emission characteristics were measured. The O{sub 2} plasma treated SWCNTs have shown dramatic improvement in their field emission properties with emission current density of 111 mA/cm{sup 2} at a much lower turn on field of 0.8 V/μm. The as grown as well as plasma treated SWCNTs were also characterized by various techniques, such as scanning electron microscopy, high resolution transmission electron microscopy, Raman spectroscopy, and Fourier transform infrared spectroscopy before and after O{sub 2} plasma treatment and the findings are being reported in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tomography and High-Resolution Electron Microscopy Study of Surfaces and Porosity in a Plate-Like γ-Al 2 O 3

Morphological and surface characteristics of gamma-Al 2 O 3 are topics of high relevance in the field of catalysis. Using tomography and high-resolution S/TEM imaging, we have studied the surface characteristics of a model gamma-Al 2 O 3 synthesized in the shape of platelets and macroscopically defined by (110)Al 2 O 3 and (111)Al 2 O 3 surface facets. We show that the dominant (110)Al 2 O 3 surface of the synthesized gamma-Al 2 O 3 is not atomically flat but undergoes a significant reconstruction, forming nanoscale (111)Al 2 O 3 terraces. In addition to high resolution imaging, tomographic analysis was carried out, enabling an examination of the pores/voids, which were found to be mostly enclosed within the bulk and inaccessible to gasses or metals. Tomographic analysis shows that the surfaces of the pores are defined exclusively by (100)Al 2 O 3 and (111)Al 2 O 3 facets. The importance of these findings is discussed in the context of relative surface energies of low index surfaces and ethanol desorption characteristics.

Environmental Molecular Sciences Laboratory↗

Soot Nanostructure: Using Fringe Analysis Software on High Resolution Transmission Electron Microscopy of Carbon Soot

Using high resolution transmission electron images of carbon nanotubes and carbon particles, we are able to use image analysis program to determine several carbon fringe properties, including length, separation, curvature and orientation. Results are shown in the form of histograms for each of those quantities. The combination of those measurements can give a better indication of the graphic structure within nanotubes and particles of carbon and can distinguish carbons based upon fringe properties. Carbon with longer, straighter and closer spaced fringes are considered graphite, while amorphous carbon contain shorter, less structured fringes.

King, James D.↗

High resolution electron microscopy of Ag-clusters in crystalline and non-crystalline morphologies grown inside superfluid helium nanodroplets

We present a first investigation of structural properties of Ag clusters with a diameter of up to 5.5 nm grown inside superfluid helium nanodroplets (He{sub N}) and deposited on an amorphous C surface. With high resolution transmission electron microscope images we are able to show that in addition to the crystalline face centered cubic (fcc) structure, noncrystalline icosahedral (Ih), and decahedral (Dh) morphologies are grown. Relative abundances (56% fcc, 31% Dh, and 13% Ih) as well as the size distribution of each morphology (mean diameters d{sub fcc}=2.62(5) nm, d{sub Dh}=3.34(7) nm, and d{sub Ih}=3.93(2) nm) do not reflect the situation expected from pure energetic considerations, where small Ihs should be followed by medium sized Dhs and large fccs. Instead, kinetic factors seem to play an important role in the formation of these structures, as it appears to be the case for clusters formed by inert gas aggregation. Considering the low temperatures (0.37 K) and extremely high cooling rates, we discuss basic ideas that might lead to a qualitative picture of the cluster formation process inside He{sub N}.

36 MATERIALS SCIENCE↗

Coherence Volume of an Optical Wave Field with Broad Frequency and Angular Spectra

We consider the sizes of a region in a three-dimensional space in which an optical wave field excites mutually coherent perturbations. We discuss the conditions under which the length of this region along the direction of propagation of the wave field and, correspondingly, its volume are determined either by the width of the frequency spectrum of the field or by the width of its angular spectrum, or by the parameters of these spectra simultaneously. We obtain expressions for estimating extremely small values of the coherence volume of the fields with a broad frequency spectrum and an extremely broad angular spectrum. Using the notion of instantaneous speckle-modulation of the wave field, we give a physical interpretation to the occurrence of a limited coherence volume of the field. The length of the spatiotemporal coherence region in which mutually coherent perturbations occur at different times is determined. The coherence volume of a wave field that illuminates an object in high-resolution microscopy with frequency broadband light is considered. The conditions for the dominant influence of the angular or frequency spectra on the longitudinal length of the coherence region are given, and the conditions for the influence of the frequency spectrum width on the transverse coherence of the wave field are examined. We show that, when using fields with broad and ultrabroad spectra in high-resolution microscopy, this influence should be taken into account.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗