Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high magnetic fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Vibration damping of elastic waves in electrically conducting media subjected to high magnetic fields

The propagation of vibrational energy in bulk, torsional, and flexural modes, in electrically conducting media can undergo strong attenuation if subjected to high magnetic fields in certain spatial arrangements. The reasons for this are induced Eddy currents which are generated by the volume elements in the media moving transversally to the magnetic field at acoustic velocities. In magnetic fields achievable with superconductors, the non-conservative (dissipative) forces are compared to the elastic and inertial forces for most metals. Strong dissipation of vibrational energy in the form of heat takes place as a result. A simplified theory is presented based on engineering representations of electrodynamics, attenuation values for representative metals are calculated, and problems encountered in formulating a generalized theory based on electrodynamics of moving media are discussed. General applications as well as applications specific to maglev are discussed.

Horwath, T. G.↗

Multi-mode analysis of surface losses in a superconducting microwave resonator in high magnetic fields

This paper reports on a surface impedance measurement of a bulk metal niobium–titanium superconducting radio frequency (SRF) cavity in a magnetic field (up to 10 T). Here, a novel method is employed to decompose the surface resistance contributions of the cylindrical cavity end caps and walls using measurements from multiple TM cavity modes. The results confirm that quality factor degradation of a NbTi SRF cavity in a high magnetic field is primarily from surfaces perpendicular to the field (the cavity end caps), while parallel surface resistances (the walls) remain relatively constant. This result is encouraging for applications needing high Q cavities in strong magnetic fields, such as the Axion Dark Matter eXperiment because it opens the possibility of hybrid SRF cavity construction to replace conventional copper cavities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Multi-mode Analysis of Surface Losses in a Superconducting Microwave Resonator in High Magnetic Fields

This paper reports on a surface impedance measurement of a niobium titanium superconducting radio frequency (SRF) cavity in a magnetic field (up to $10\,{\rm T}$). A novel method is employed to decompose the surface resistance contributions of the cylindrical cavity end caps and walls using measurements from multiple $TM$ cavity modes. The results confirm that quality factor degradation of a NbTi SRF cavity in a high magnetic field is primarily from surfaces perpendicular to the field (the cavity end caps), while parallel surface resistances (the walls) remain relatively constant. This result is encouraging for applications needing high Q cavities in strong magnetic fields, such as the Axion Dark Matter eXperiment (ADMX), because it opens the possibility of hybrid SRF cavity construction to replace conventional copper cavities.

43 PARTICLE ACCELERATORS↗

Pinning Characteristics of Zr and Hf- Added REBCO Coated Conductors Made by Advanced MOCVD in Low-to-High Magnetic Fields

BaMO 3 (M=Zr, Hf) pinning centers introduced in REBa 2 Cu 3 O 7-x (REBCO and RE = rare earth) coated conductors yield superior performance in high magnetic fields. We present the critical current density J c over a temperature range of 4.2-77 K and magnetic fields of 0-14 T (B || c-axis), of 5-15 mol.% Zr- and Hf-added REBCO 4+ μm thick film tapes fabricated by advanced metal organic chemical vapor deposition (A-MOCVD). The morphology of self-assembled BMO nanorods aligned along c-axis is found to be dependent on the Zr/Hf content. We also observe a correlation between the density of RE 2 O 3 in-plane nano-precipitates and the continuity and concentration of BMO nanorods in films of different Ba content. It is found that the (Ba+M)/Cu (M=Zr, Hf) content in REBa 2 Cu 3 O 7-x affects the shape of pinning force density curves over a wide magnetic field range and temperatures below 20 K. Another remarkable observation is the similarity in the critical current properties of Hf and Zr -added REBCO films as function of (Ba+M)/Cu content at intermediate to high range of (Ba+M)/Cu content. As a result, a quantitative analysis of pinning efficiency and correlation with the microstructure of Zr and Hf- added REBCO coated conductors is discussed.

2G high-temperature superconductor (2G-HTS)↗

High magnetic field response of superconductivity dome in quantum artificial high−⁢𝑇 𝐶 superlattices with variable geometry

It is known that cuprate artificial high-𝑇 𝐶 superlattices (AHTS) with period 𝑑, composed of quantum wells confining interface space charge in stoichiometric Mott insulator layers (𝑆), with thickness 𝐿, at the interface with overdoped normal metallic cuprate layers (𝑁) show a superconducting dome by tuning the geometric 𝐿 over 𝑑 ratio of the SNSN superlattice with the top predicted by quantum material design engineering quantum size effects. Here we report high-field magnetotransport measurements up to 41 Tesla of AHTS across the entire superconducting dome. The results show the universal upward-concave behavior of the temperature-dependent upper critical magnetic field in low-𝑇 𝐶 samples at the rising edge and drop edge of the dome, providing strong evidence consistent with two-band superconductivity in agreement with multigap theory used for quantum design of the SNSN superlattices. The measured superconducting coherence length demonstrates that atomic-scale engineering controls not only the critical temperature but also the intrinsic pair size at Fano-Feshbach resonances physics paving the way toward next-generation quantum devices and shedding light on unconventional superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface Impedance of Nb$_3$Sn and YBa$_2$Cu$_3$O$_{7-\sigma}$ in High Magnetic Fields

New potential rf applications of superconductors emerged with the need to operate in high dc magnetic fields (up to 16 T) where vortex motion dictates the response: the beam screen coating of the Future Circular Collider (FCC) [1] and haloscopes, i.e. rf cavities for the axions detection [2]. However, very few data are available in the required regimes. We present in this work measurements of the surface impedance Z up to 12 T on bulk Nb₃Sn and YBCO thin films grown by different techniques. The measurements are performed with a dielectric loaded resonator operating at 15 GHz. We obtained the vortex motion resistivity and extracted the high frequency vortex motion parameters [3]: the depinning frequency, the flux-flow resistivity and the pinning constant, as well as their temperature and field dependences. Substantial differences are highlighted in the high frequency pinning properties of the studied materials, providing useful information on possible improvements in view of applications. A comparison with the results obtained in the microwave frequency range at lower fields (up to 1 T) is given.

43 PARTICLE ACCELERATORS↗

Electrical transport and torque magnetometry studies of the kagome compound LuV 6 ⁢Sn 6 under high magnetic fields

We present a comprehensive investigation of the kagome metal LuV 6 ⁢Sn 6 through magnetotransport and torque magnetometry studies in magnetic fields up to 41 T and temperatures as low as 0.3 K. Magnetoresistance measurements up to 31 T reveal clear Shubnikov–de Haas (SdH) oscillations with two dominant frequency peaks: 𝐹 𝛼 =12 T and 𝐹 𝛽 =155 T. The Berry phase Φ 𝐁 , calculated from Landau level fan diagrams, indicates a nontrivial topology for both the 𝛼- and 𝛽-orbits. To explore the possibility of higher-frequency signals in LuV 6 ⁢Sn 6 , we employed another technique: torque magnetometry. Torque measured with applied fields up to 41 T reveals clear de Haas–van Alphen (dHvA) oscillations, with frequency signals as high as 10 kT. Angular and temperature-dependent quantum oscillation measurements allowed us to extract the effective mass of charge carriers and map the Fermi surface of LuV 6 ⁢Sn 6 . To complement the experimental findings, we performed electronic band structure and Fermi surface calculations. The electronic bands of LuV 6 ⁢Sn 6 reveal intriguing features, including flat bands, van Hove singularities, and Dirac points near the Fermi level. Two bands cross the Fermi level, contributing a deformed cylindrical shape at the Γ-point and small chainlike Fermi surfaces near the Brillouin zone boundaries. Theoretical quantum oscillation frequencies derived from Fermi surface cross-sectional areas align well with experimental SdH and dHvA results. These combined experimental and theoretical insights provide a deeper understanding of the electronic structure of LuV 6 ⁢Sn 6 and establish the foundation for exploring electronic properties in other vanadium- and titanium-based kagome systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of cobalt grown from Co-S eutectic in high magnetic fields

Samples of Co were grown directly in the ferromagnetic state under equilibrium conditions using a cobalt sulfide flux. Magnetic fields up to 9 T were applied during growth, and isolated Co products exhibit progressively elongated morphologies, from cubes to rectangular rods to needle-like tendrils with poorly-defined facets. The degree of elongation of the major axis was found to correlate with magnetic field direction, strength, and gradient. Two-dimensional X-ray diffraction data indicate some level of polycrystalline-like samples, and quantitative analyses (Le Bail and Rietveld) of the one-dimensional data confirm the presence of hcp and fcc phases. The magnetic responses indicate a partial alignment of the magnetic easy-axis of the hcp phase along the magnetic field present during growth.

36 MATERIALS SCIENCE↗

Multidimensional spectroscopy of magneto-excitons at high magnetic fields

We perform two-dimensional Fourier transform spectroscopy on magneto-excitons in GaAs at magnetic fields and observe Zeeman splitting of the excitons. The Zeeman components are clearly resolved as separate peaks due to the two-dimensional nature of the spectra, leading to a more accurate measurement of the Zeeman splitting and the Landé g factors. Quantum coherent coupling between Zeeman components is observed using polarization dependent one-quantum two-dimensional spectroscopy. We use two-quantum two-dimensional spectroscopy to investigate higher four-particle correlations at high magnetic fields and reveal the role of the Zeeman splitting on the two-quantum transitions. The experimental two-dimensional spectra are simulated using the optical Bloch equations, where many-body effects are included phenomenologically.

Mapara, V.↗

Microwave measurements of the high magnetic field vortex motion pinning parameters in Nb$_3$Sn

The high frequency vortex motion in Nb3Sn was analyzed in this work up to 12 T. We used a dielectric loaded resonator tuned at 15 GHz to evaluate the surface impedance Z of a Nb3Sn bulk sample (24.8 at.%Sn). From the field induced variation of Z, the high frequency vortex parameters (the pinning constant k p , the depinning frequency ν p and the flux flow resistivity ρ ff ) were obtained over a large temperature and field range; their field and temperature dependencies were analyzed. Comparison with other superconducting materials shows that high frequency applications in strong magnetic fields are also feasible with Nb3Sn. In the present work, we report the first measurements about the microwave response in Nb3Sn in strong magnetic fields.

Alimenti, Andrea↗

Competing magnetic states in multiferroic BaYFeO 4 : A high magnetic field study

Spin-driven ferroelectricity phenomena have drawn great interest in the scientific community due to potential application in spintronics and their complex physical mechanisms. A noticeable example of this is multiferroic BaYFeO 4 that exhibits an unconventional magnetoelectric (ME) coupling due to the uncorrelated behavior of the ferroelectric and cycloidal states under an applied magnetic field. To shed more light on this spin-driven ME effect, a high-quality sample of BaYFeO 4 was synthesized by a standard solid-state reaction method, and its high-field (up to 9 T) magnetic properties have been systematically investigated by means of magnetometry, magnetocaloric effect, and Mössbauer measurements over a wide temperature range (5–400 K). In addition, its crystal and magnetic structures have been studied using x-ray and neutron powder diffraction. Results obtained in this work indicate that Fe spins form a long-range spin density wave (SDW) antiferromagnetic (AFM) order at $T_{\text{N1}}$ ~ 50K, which transforms into the cycloidal AFM order at $T_{\text{N2}}$ ~ 35K. A spin-glass-like state emerges below $T^\ast$ ~ 17K, and coexists with the long-range cycloidal AFM one in this temperature range. Magnetocaloric and Mössbauer measurements consistently confirm the robustness of both the long-range SDWand cycloidal AFM orders under applied magnetic fields up to 6 T, whereas the spin-glass state is converted into the ferromagnetic (FM) state when the applied magnetic field exceeds 1 T. These findings pinpoint the fact that the magnetic field evolution of spin correlations from the AFM to FM character in the spin-glass state is responsible for the magnetic field dependence of ferroelectricity in BaYFeO 4 .

36 MATERIALS SCIENCE↗

Apparatus for trapping and thermal detection of atomic hydrogen in high magnetic fields at low temperatures

An apparatus is described in which hydrogen atoms were trapped at temperatures down to 1.1 K in the 11 T field of a large volume superconducting magnet. A high sensitivity thermal detector was used to study trapping and recombination of atoms on the detector surface. The apparatus permits the application of extremely high steady state magnetic fields to study the potential effects of electron spin polarization on the stabilization of hydrogen atoms.

Woollam, J. A.↗

Magnetic Breakdown and Topology in the Kagome Superconductor CsV 3 Sb 5 under High Magnetic Field

The recently discovered layered kagome metals of composition AV 3 Sb 5 (A = K, Rb, Cs) exhibit a complex interplay among superconductivity, charge density wave order, topologically nontrivial electronic band structure and geometrical frustration. Here, we probe the electronic band structure underlying these exotic correlated electronic states in CsV 3 Sb 5 with quantum oscillation measurements in pulsed fields up to 86 T. The high-field data reveal a sequence of magnetic breakdown orbits that allows the construction of a model for the folded Fermi surface of CsV 3 Sb 5 . The dominant features are large triangular Fermi surface sheets that cover almost half the folded Brillouin zone. These sheets have not yet been detected in angle resolved photoemission spectroscopy and display pronounced nesting. In conclusion, the Berry phases of the electron orbits have been deduced from Landau level fan diagrams near the quantum limit without the need for extrapolations, thereby unambiguously establishing the nontrivial topological character of several electron bands in this kagome lattice superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-field magnetization of Dy2O3

The magnetization of powdered samples of Dy2O3 has been measured at temperatures between 1.45 deg and 4.2 K, in applied magnetic fields ranging to 7 Teslas. A linear dependence of magnetization on applied field is observable in high field region, the slope of which is independent of temperature over the range investigated. The extrapolated saturation magnetic moment is 2.77 + or - 0.08 Bohr magnetons per ion.

Flood, D. J.↗

Metastability exchange optical pumping of 3 He at low pressure and high magnetic field

We report systematic studies on metastability exchange optical pumping of 3 He nuclei have been performed at Jefferson Lab using a 1-torr sealed cell at magnetic fields from 2 to 4 T. The effects of the discharge intensity, pump laser power and pumping transition schemes on achievable nuclear polarization and pumping rate have been investigated. A maximum steady-state nuclear polarization of about 75% has been obtained. This work provides a baseline for the development of the novel polarized 3 He target for CLAS12 at Jefferson Lab.

47 OTHER INSTRUMENTATION↗

High-field magnetization of Dy2O3

The magnetization of powdered samples of Dy2O3 has been measured at temperatures between 1.45 and 4.2 K, in applied magnetic fields ranging to 70 kilogauss. A linear dependence of magnetization on applied field is observable in the high-field region, the slope of which is independent of temperature over the range investigated. The extrapolated saturation magnetic moment is about 2.77 Bohr magnetons per ion.

Flood, D. J.↗

Countering Solutal Buoyant Convection with High Magnetic Fields

An important component in biotechnology, particularly in the area of protein engineering and rational drug design is the knowledge of the precise three-dimensional molecular structure of proteins. The quality of structural information obtained from X-ray diffraction methods is directly dependent on the degree of perfection of the protein crystals. As a consequence, the growth of high quality macromolecular crystals for diffraction analyses has been the central focus for biochemist, biologists, and bioengineers. Macromolecular crystals are obtained from solutions that contain the crystallizing species in equilibrium with higher aggregates, ions, precipitant, other possible phases of the protein, foreign particles, the walls of the container, and a likely host of other impurities. By changing transport modes in general, i.e., reduction of convection and sedimentation, as is achieved in microgravity, we have been able to dramatically effect the movement and distribution of macromolecules in the fluid, and thus their transport, formation of crystal nuclei, and adsorption to the crystal surface. While a limited number of high quality crystals from space flights have been obtained, as the recent National Research Council (NRC) review of the NASA microgravity crystallization program pointed out, the scientific approach and research in crystallization of proteins has been mainly empirical yielding inconclusive results. We postulate that we can reduce convection in ground-based experiments and we can understand the different aspects of convection control through the use of strong magnetic fields and field gradients. We postulate that limited convection in a magnetic field will provide the environment for the growth of high quality crystals. The approach exploits the variation of fluid magnetic susceptibility with concentration for this purpose and the convective damping is realized by appropriately positioning the crystal growth cell so that the magnetic susceptibility force counteracts terrestrial gravity. The general objective is to test the hypothesis of convective control using a strong magnetic field and magnetic field gradient and to understand the nature of the various forces that come into play. Specifically we aim to delineate causative factors and to quantify them through experiments, analysis and numerical modeling. The paper will report on the current status of the investigation and discuss results from the experimental and modeling efforts.

Ramachandran, N.↗