Impact of edge harmonic oscillations on the divertor heat flux in NSTX
All the data was uploaded with .cvs file, we have not uploaded the figure 1 data since it is just photo show field of view of IR and GPI diagnostic.
edge harmonic oscillation↗
SEARCH · Engineering Papers
Results for “heat flux width”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Performance assessment of long-legged tightly-baffled divertor geometries in the ARC reactor concept
Extremely intense power exhaust channels are projected for tokamak-based fusion power reactors; a means to handle them remains to be demonstrated. Advanced divertor configurations have been proposed as potential solutions. Recent modelling of tightly baffled, long-legged divertor geometries for the divertor test tokamak concept, ADX, has shown that these concepts may access passively stable, fully detached regimes over a broad range of parameters. The question remains as to how such divertors may perform in a reactor setting. To explore this, numerical simulations are performed with UEDGE for the long-legged divertor geometry proposed for the ARC pilot plant conceptual design - a device with projected heat flux power width (λq||) of 0.4 mm and power exhaust of 93 MW - first for a simplified Super-X divertor configuration (SXD) and then for the actual X-point target divertor (XPTD) being proposed. It is found that the SXD, combined with 0.5% fixed-fraction neon impurity concentration, can produce passively stable, detached divertor regimes for power exhausts in the range of 80-108 MW - fully accommodating ARC's power exhaust. The XPTD configuration is found to reduce the strike-point temperature by a factor of ~10 compared to the SXD for small separations (~1.4λq||) between main and divertor X-point magnetic flux surfaces. Even greater potential reductions are identified for reducing separations to ~1λq|| or less. The power handling response is found to be insensitive to the level of cross-field convective or diffusive transport assumed in the divertor leg. By raising the separatrix density by a factor of 1.5, stable fully detached divertor solutions are obtained that fully accommodate the ARC exhaust power without impurity seeding. To our knowledge, this is the first time an impurity-free divertor power handling scenario has been obtained in edge modelling for a tokamak fusion power reactor with λq|| of 0.4 mm.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
New heat flux model for non-axisymmetric divertor infrared structures
A convective heat flux model for perturbed plasmas, based on guiding center ion drift in vacuum elds (A. Wingen, et al., Phys. Plasmas 21 (2014) 012509), has been updated. The old model only considered ion heat flux, while here also electron heat flux is included. The updated model predicts divertor heat flux distributions in non-axisymmetric (3D) plasmas with applied Resonant Magnetic Perturbation (RMP) fields, and includes electric scalar potentials. It is found that a radial electric field in the near Scrape-o Layer (SOL) can considerably shift the footprints toroidally, leading to a smearing out eff ect of the incident heat flux, while a simple model for sheath potential has little impact on footprints. Various approaches to model electron heat flux are studied. A convective electron model, based on collisionless free streaming, is found to yield the best agreement with measurements, while a conductive model requires a at temperature gradient inside lobes to yield acceptable peak heat ux values. A heuristic heat flux layer approach, based on a fixed layer width also requires a limited heat flux inside the last closed flux surface (LCFS); by selecting various locations of the LCFS, the results of the conductive or convective model can be recovered respectively. The sum of ion and electron heat fluxes, both obtained by the convective model, is compared to experimental data for multiple time slices in DIII-D. Strike point splitting is observed with peak heat fluxes and layer widths that compare well to infrared camera (IR) measurements.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Effect of Lateral Conduction in a Rectangular Fuel Plate and Optimum Stripe Widths for the OPAL Reactor
The impetus for this work is the Proliferation Resistance Optimization (PRO-X) program, which was created by the National Nuclear Security Administration (NNSA) of the US Department of Energy (DOE) to provide a framework for developing reactor designs that minimize the production of special nuclear materials while maximizing performance for peaceful uses. The Argentine company INVAP and Argonne National Laboratory collaborated to share knowledge and expertise regarding the thermal analysis of research reactors. Working together, they designed a series of test problems based on the Open Pool Australian Light Water (OPAL) reactor, whose fuel is in the form of flat plates cooled by water flowing through narrow rectangular channels. ANL used their PLTEMP/ANL code. INVAP used their TERMIC code (and its new multi-plate version, TERMIC-MP). Then, INVAP and ANL compared the two sets of results. 1-D models were used during the collaboration since for research reactor analysis, largely 1-D thermal-hydraulics models are commonly used because they are simple to apply and technically defendable. The collaboration between the two organizations aims for improvements in thermal-hydraulic models. Improvements to methods and models can reduce modeling uncertainties and excessive conservatism, allowing greater reactor performance without reducing predicted safety margins. Therefore, these improvements potentially expand the design space, making additional designs feasible, which, in turn, may achieve better fuel utilization and proliferation resistance in the designs. This report provides justification for the lateral node size (stripe width) chosen for the 1-D computer models during the collaboration. The lateral heat conduction in OPAL fuel plates is evaluated using the two-dimensional conduction capability of PLTEMP/ANL to determine a representative hot-stripe width that can be conservatively used for one-dimensional steady-state thermal-hydraulic analysis. Basically, a representative hot-stripe width needs to be selected so that the actual heat flux averaged over this stripe width is greater than or equal to the maximum heat flux obtained by the two-dimensional analysis. Detailed results in this report show that a hot-stripe width of 8.125 mm can be conservatively used for the one-dimensional thermal-hydraulics analysis of all plates. Therefore, eight equal stripes (8.125 mm each) are recommended to be modeled in the MCNP and PLTEMP/ANL full core models of the OPAL reactor.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
The role of plasma–atom and molecule interactions on power & particle balance during detachment on the MAST Upgrade Super-X divertor
This paper shows first quantitative analysis of the detachment processes in the MAST Upgrade Super-X divertor (SXD). We identify an unprecedented impact of plasma-molecular interactions involving molecular ions (likely $D^+_2$), resulting in strong ion sinks (Molecular Activated Recombination—MAR), leading to a reduction of ion target flux. The MAR ion sinks exceed the divertor ion sources before electron-ion recombination (EIR) starts to occur, suggesting that significant ionisation occurs outside of the divertor chamber. In the EIR region, $T_e \ll 0.2$ eV is observed and MAR remains significant in these deep detached phases. The total ion sink strength demonstrates the capability for particle (ion) exhaust in the Super-X Configuration. Molecular Activated Dissociation is the dominant volumetric neutral atom creation process can lead to an electron cooling of 20% of $P_\mathrm{SOL}$. The measured total radiative power losses in the divertor chamber are consistent with inferred hydrogenic radiative power losses. This suggests that intrinsic divertor impurity radiation, despite the carbon walls, is minor in the divertor chamber. This contrasts previous TCV results, which may be associated with enhanced plasma-neutral interactions and reduced chemical erosion in the detached, tightly baffled SXD. The above observations have also been observed in higher heat flux (narrower SOL width) type I ELMy H-mode discharges. This provides evidence that the characterisation in this paper may be general.
plasma-molecular interactions↗
Reassessing energy deposition for the ITER 5 MA vertical displacement event with an improved DINA model
The beryllium (Be) main chamber wall interaction during a 5 MA/1.8 T upward, unmitigated VDE scenario, first analysed in [J. Coburn et al., Phys. Scr. T171 (2020) 014076] for ITER, has been re-evaluated using the latest energy deposition analysis software. Updates to the DINA disruption model are summarized, including an improved numerical convergence for the 0D power balance, limitations on the safety factor within the plasma core, and the choice to maintain a constant plasma +halo poloidal cross-section. Such updates result in a broad halo region and higher radiated power fractions compared to previous models. The new scenario lasts for ~75 ms and deposits ~29 MJ of energy, with the radial distribution of parallel heat flux q‖(r)resembling an exponential falloff with an effective λ_q=75-198 mm. A maximum halo width w_h of 0.52 m at the outboard midplane is observed. SMITER field line tracing and energy deposition simulations calculate a q_{⊥,max} of ~83 MW/m^2 on the upper first wall panels (FWP). Heat transfer calculations with the MEMOS-U code show that the FWP surface temperature reaches ~1000 K, well below the Be melt threshold. Variations of this 5 MA scenario with Be im-purity densities from 0 to 3∙10^19 m^-3 also remain below the melt threshold despite differences in energy deposition and duration. These results are in contrast to the early study which predicted melt damage to the first wall [J. Coburn et al., Phys. Scr. T171 (2020) 014076], and emphasize the importance of accurate models for the halo width w_h and the heat flux distribution q‖(r)within that halo width. The 2020 halo model in DINA has been compared with halo current experiments on COMPASS, JET, and Alcator C-Mod, and the preliminary results build confidence in the broad halo width predictions. Results for the 5 MA VDE are compared with those for a 15 MA equivalent, generated using the new DINA model. At the higher current, significant melting of the upper FWP is to be expected.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Turbulence driven widening of the near-SOL power width in ASDEX Upgrade H-Mode discharges
Divertor heat flux data from infra red (IR) from various tokamaks in H-Mode regime show that the power width, $\lambda_{q}$, scales approximately like 1.6 $(R/a) ρ_{s,pol}$. However, the IR based scaling comes with the restriction that only discharges were considered with attached divertor conditions. Here we set up a new data base covering low edge density data but also including high density plasmas reaching the H-mode density limit. We use Thomson-scattering to measure the electron temperature decay length which will set the near-SOL power width through parallel heat conduction. We present scaling results for the density, temperature and pressure separatrix fall-off lengths. As the principal result we derive a generalized power width scaling which reads as $\lambda_{q}\propto\,\rho_{s,pol}\cdot(1+2.1\alpha_{t}^{1.7})$ where $\alpha_{t}$ describes a normalized collisionality ($\alpha_{t} = 3\cdot\,10^{-18}\,R\,q^2\,n\,Z_{eff}T^{-2}$). The parameter $\alpha_{t}$ describes the relative importance of the interchange effect on drift-wave turbulence as proposed by Scott and is found to be closely linked to the diamagnetic parameter αd introduced by Rogers, Drake and Zeiler (RDZ). The edge operational space for ASDEX Upgrade displays a boundary qualitatively in agreement with the region labelled as density limit in the edge plasma phase space proposed by RDZ. The data base shows in the limit of low edge densities ($\alpha_{t}\simeq\,0.2$) accurate agreement to the IR based power width scaling. At elevated separatrix densities ($\alpha_{t}\simeq\,1$) the power width is broadened by a factor of up to about three accompanied by a reduction of the $\text{H}_{98,y2}$ confinement factor. Finally, plasmas with higher triangularity show higher values for $\text{H}_{98,y2}$ in the same range of normalized collisionality.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
How fluctuation intensity flux drives SOL expansion
Abstract Predictions of heat load widths λ q based on particle orbits alone are very pessimistic. This paper shows that pedestal peeling-ballooning (P-B) magnetohydrodynamic (MHD) turbulence broadens the stable scrape-off layer (SOL) by the transport, or spreading, of fluctuation energy from the pedestal. λ q is seen to increase with Γ ε , the fluctuation energy density flux. We elucidate the fundamental physics of the spreading process. Γ ε increases with pressure fluctuation correlation length. P-B turbulence is seen to be especially effective at spreading, on account of its large effective mixing length. Spreading is shown to be a multiscale process, which is enhanced by the synergy of large and small-scale modes. Pressure fluctuation skewness correlates well with the spreading flux–with the zero crossing of skewness and Γ ε spatially coincident–suggesting the role of coherent fluctuation structures and the presence of intermittency in λ q broadening. λ q ∼ B p − 1 scaling persists for the broadened SOL. We show that the spreading flux increases for increasing pedestal pressure gradient ∇ P 0 and for decreasing pedestal collisionality υ ped ∗ . This trend is due to the dominance of peeling modes for large ∇ P 0 and low υ ped ∗ . Ultimately, we see that a state of weak MHD turbulence, as for small ELMs, is very attractive for heat load management. Our findings have transformative implications for future fusion reactor designs and call for experimental investigations to validate the observed trends.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Dependence of Deep Convective Cell Properties on Meteorological and Aerosol Conditions during TRACER
Deep convective cells significantly influence Earth’s energy balance and water cycle. However, their accurate representation in numerical models remains challenging due to their small spatiotemporal scales and limited observational constraints. This study examines over ∼400 deep convective cells near Houston, observed by a dual-polarization C-band radar during the Tracking Aerosol Convection Interactions Experiment (TRACER) intensive observation period (June–September 2022). Cells are categorized by lifetime into short-lived (<40 min), intermediate-lived (40–80 min), and long-lived (80+ min) groups. Long-lived cells were broader (∼13.2 km at 2–4-km height) and deeper (∼11.4 km) than short-lived cells (∼6.4-km width, ∼7.31-km height). Using random forest (RF) modeling and correlation analyses, precipitable water vapor (PWV), 2–6-km lapse rate, 0–8-km bulk shear, and fine aerosol mass concentration (Mass_f) are identified as key predictors of cell lifetime. Higher PWV is associated with significantly longer convective cell lifetimes compared to the low-PWV group, particularly within low 2–6-km temperature lapse rate (LR_26km), moderate-to-higher 0–8-km bulk shear (BS_08km), and low-to-moderate Mass_f environments. RF analysis also identifies low-level (0–2 km) equivalent potential temperature, PWV, Mass_f, and surface latent heat flux as key predictors for cell width and height. Short-lived cells have higher aerosol number concentrations (500–1000-nm size range), linked to onshore wind conditions and marine aerosols; however, their low concentration suggests the sensitivity may reflect associated meteorological regimes rather than a direct aerosol effect. Long-lived cells have higher concentrations of organic and sulfate aerosols, while short-lived cells exhibit higher black carbon concentrations. These results highlight the intricate dependence of convective cell lifetimes and structure on environmental moisture, thermodynamics, wind shear, and aerosol characteristics.
54 ENVIRONMENTAL SCIENCES↗
Gyrokinetic prediction of core tungsten peaking in a WEST plasma with nitrogen impurities
Tungsten peaking is predicted in the core of a WEST plasma with total-f gyrokinetic simulations, including both collisional and turbulent transport. This prediction is validated with a synthetic diagnostic of the bolometry. Although nitrogen impurities are shown to reduce the neoclassical peaking of tungsten on-axis, the overall tungsten peaking increases when nitrogen impurities are present, as they reduce the turbulence screening off-axis. This finding is important for the plasma current ramp-up phase of ITER, where light impurities seeding will be desirable to achieve low temperatures at the plasma-facing components and reduce tungsten sputtering. It provides further argument for applying early ECRH heating to maintain margins on the core power balance. The neoclassical peaking factor is cross-verified between XGC and FACIT. The heat flux at separatrix and the heat load width are modeled by XGC and compared to WEST data.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Impact of ITCZ width on global climate: ITCZ-MIP
Abstract. The width of the Inter-Tropical Convergence Zone (ITCZ) affects tropical rainfall, Earth's albedo, large-scale circulation, and climate sensitivity. To better understand the ITCZ width and its effects on global climate, we present a protocol to force changes in ITCZ width in climate models. Starting from an aquaplanet configuration with a slab ocean, adding surface heat fluxes in the deep tropics forces the ITCZ to narrow, and subtracting them causes it to widen. The protocol successfully generates changes in ITCZ width in all four climate models used in this study. ITCZ width in each model responds linearly to forcing magnitude and sign. Comparing across the four climate models, a response to varying ITCZ width that is remarkably consistent among models is the ITCZ strength, which is greater the narrower the ITCZ. On the other hand, the effect of varying ITCZ width on climate sensitivity is divergent among our four models, varying even in sign. Results from this pilot study highlight the connections between surface fluxes, ITCZ width, and the wider climate. A comprehensive model intercomparison project (MIP) has the potential to advance understanding of both the physical processes shaping ITCZ width and its influence on remote atmospheric circulations and global climate.
Geology↗
Development and validation of non-axisymmetric heat flux simulations with 3D fields using the HEAT code
A new comprehensive module to simulate heat fluxes from three-dimensional (3D) magnetic fields has been implemented in the HEAT code. Especially compact tokamaks like SPARC require tools to predict and manage large heat fluxes. Existing release versions of HEAT can only simulate axisymmetric heat flux on 3D plasma facing components. The new module uses an M3D-C1 perturbed equilibrium and the MAFOT code to trace field lines of the perturbed 3D magnetic field. Heat flux is then assigned to the resulting footprints via a 3D layer model. The model distinguishes between the scrape-off layer, the magnetic lobes and the private flux region, and employs only 0D parameters like the layer width, diffusive spread and the last closed flux surface position in the perturbed edge to generate a heat flux profile. The magnitude is normalized to the total input power. Resulting heat flux simulations are compared and validated against infrared measurements in the DIII-D tokamak with applied 3D fields; good agreement is found for several cases. The new module can now be applied to the SPARC tokamak; a preliminary result for applied rotating 3D fields is shown.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Heuristic predictions of RMP configurations for ELM suppression in ITER burning plasmas and their impact on divertor performance
Abstract A subspace of resonant magnetic perturbation (RMP) configurations for edge localized mode (ELM) suppression is predicted for H-mode burning plasmas at 15 MA current and 5.3 T magnetic field in ITER. Perturbations to the core plasma can be reduced by a factor of 2 for equivalent edge stability proxies, while the perturbed plasma boundary geometry remains mostly resilient. The striated domain of perturbed field lines connecting from the main plasma (normalized poloidal flux < 1 ) to the divertor targets is found to be significantly larger than the expected heat load width in the absence of RMPs. This facilitates heat load spreading with peak values at an acceptable level below 10 MW m − 2 on the outer target already at moderate gas fueling and low Ne seeding for additional radiative dissipation of the 100 MW of power into the scrape-off layer (SOL). On the inner target, however, re-attachment is predicted away from the equilibrium strike point due to increased upstream heat flux, higher downstream temperature and less efficient impurity radiation.
3D plasma boundary modeling↗
Progress of Divertor Heat and Particle Flux Control in EAST for Advanced Steady-State Operation in the Last 10 Years
Active control of the excessively high heat and particle fluxes on the divertor target plates is of fundamental importance to the steady state operation of tokamaks, especially for fusion reactors. A series of experiments have been carried out on this critical issue to relieve the plasma-wall interactions in the experimental advanced superconducting tokamak (EAST) in the last ten years, not only contributing to the long pulse operation of EAST itself, but also providing physical understandings and potential techniques to the next-generation devices like ITER. Here we have characterized the power deposition pattern and broadened the divertor footprint width effectively. The plasma-wetted area is actively handled using either 3-dimentional edge magnetic topology or advanced plasma equilibrium, thereby peak heat flux around the strike point is reduced. Active control of detachment or radiation compatible with core plasma performance has progressed significantly in very recent years, with a series of active feedback control modules developed and utilized successfully, based on the divertor physics advances with both experiments and simulation. The upper divertor of EAST was upgraded from graphite to active water-cooling ITER-like tungsten in 2014, exhibiting much enhanced heat removal capability. As for the particle exhaust including both fueling and impurity particles, in addition to wall conditioning and impurity source control, the efficiency of particle flux exhaust is optimized by making full use of the divertor closure and the plasma drifts in both scrape-off layer and divertor volume. These heat and particle exhaust advances contribute greatly to a series of EAST achievements like H-mode operation over 100 s. A brief near-term plan on the integrated control of divertor plasma-wall interactions in long-time scale will also be introduced, aiming to provide favorable divertor operation solution for ITER and CFETR.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Experimental observations of bifurcated power decay lengths in the near Scrape-Off Layer of ST40 High Field Spherical Tokamak
The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group follows established H-mode scalings (ranging between 2 to 8 mm) while the narrow group falls up to 10 times below these scalings (between 0.2 and 0.8 mm), being comparable to the ion total Larmor radius rather than the ion poloidal Larmor radius. The heat flux profiles of the latter group can only be described by a multi-exponential function, rather than the single exponential function convoluted with a Gaussian. The onset of the narrow scrape-off layer width is observed to be associated with suppressed magnetic fluctuations, suggesting reduced electromagnetic turbulence levels in the SOL.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Daytime convective development over land: the role of surface forcing
Water availability at the Earth surface determines the portioning of the surface heat flux into its sensible and latent components, that is, the surface heat flux Bowen ratio. The two components affect differently the surface buoyancy flux and thus the development and growth of the convective boundary layer. As a result, the Bowen ratio has a strong impact on the daytime dry and moist convection development over land. Here, we use two canonical modeling test cases, one for the shallow convection and one for the shallow-to-deep convection transition, to document the impact of the surface Bowen ratio on daytime convection development. A simple approach is used where results from simulations featuring the original setup are contrasted with simulations where surface sensible heat flux takes on values of the latent heat flux and vice versa. Such a change illustrates the key impact of the surface water availability without changing the total surface heat flux. Because of the larger surface buoyancy flux, simulations with the reversed surface heat fluxes feature faster deepening of the convective boundary layer and wider clouds once moist convection develops. Mean cloud base width of cumulus clouds increases with the boundary layer depth. For shallow-to-deep convection transition, comparison of simulations with the observed large-scale flow that feature substantial lower-tropospheric shear with simulations with no mean horizontal flow suggests that the organization of convective circulations within the boundary layer strongly affects initial size and organization of shallow convection, as well as the subsequent width increase once convection deepens and eventually transitions to deep precipitating convection. A simple explanation is provided of why deeper well-mixed convective subcloud layer results in wider clouds. The key is the larger width of boundary layer coherent updraft structures when the mixed layer is deeper.
54 ENVIRONMENTAL SCIENCES↗
Core-Pedestal Plasma Configurations in Advanced Tokamaks
Here, several configurations for the core and pedestal plasma are examined for a predefined tokamak design by implementing multiple heating/current drive (H/CD) sources to achieve an optimum configuration of high fusion power in a noninductive operation while maintaining an ideally magnetohydrodynamic (MHD) stable core plasma using the IPS-FASTRAN framework. IPS-FASTRAN is a component-based lightweight coupled simulation framework that is used to simulate magnetically confined plasma by integrating a set of high-fidelity codes to construct the plasma equilibrium (EFIT, TOQ, and CHEASE), calculate the turbulent heat and particle transport fluxes (TGLF), model various H/CD systems (TORIC, TORAY, GENRAY, and NUBEAM), model the pedestal pressure and width (EPED), and estimate the ideal MHD stability (DCON). The TGLF core transport model and EPED pedestal model are used to self-consistently predict plasma profiles consistent with ideal MHD stability and H/CD (and bootstrap) current sources. In order to evaluate the achievable and sustainable plasma beta, varying configurations are produced ranging from the no-wall stability to with-wall stability regimes, simultaneously subject to the self-consistent TGLF, EPED, and H/CD source profile predictions that optimize configuration performance. The pedestal density, plasma current, and total injected power are scanned to explore their impact on the target plasma configuration, fusion power, and confinement quality. A set of fully noninductive scenarios are achieved by employing ion-cyclotron, neutral beam injection, helicon, and lower-hybrid H/CDs to provide a broad profile for the total current drive in the core region for a predefined tokamak design. These noninductive scenarios are characterized by high fusion gain (Q ~ 4) and power (P fus ~ 600 MW), optimum confinement quality (H 98 ~ 1.1), and high bootstrap current fraction (f BS ~ 0.7) for Greenwald fraction below unity. The broad current profile configurations identified are stable to low-n kink modes either because the normalized pressure β N is below the no-wall limit or a wall is present.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Validation of the HyRAM+ physics models for use with propane
The Hydrogen Risk Assessment Model Plus (HyRAM+) toolkit combines quantitative risk assessment with simulations of unignited dispersion, ignited turbulent diffusion flames, and indoor accumulation with delayed ignition of fuels. HyRAM+ is differentiated from HyRAM in that it includes models and leak data for other alternate fuels. The models of the physical phenomena need to be validated for each of the fuels in the toolkit. This report shows the validation for propane which is being used as a surrogate for autogas, which is a mixture of propane and butane and used in internal combustion engines in vehicles. For flame length comparisons, five previously published experiments from peer reviewed journals were used to validate our models. The validation looked at flame lengths and flame widths with respect to different leak diameters, mass flow rates, and source pressures. Most of the sources included more than one set of experimental data, which were collected using different methods (CCD cameras, IR visualization etc.). In general, HyRAM+ overpredicts the flame lengths by around 65%. For heat and radiation models, we compared the heat flux and radiation data reported from two different sources to the values calculated by HyRAM+. For higher mass flow rates, the HyRAM+ calculated flame length results gave a better estimate of what is found in the experiments (65% error), but a higher error (85%) is observed between the HyRAM+ calculated lengths and the experimental flame lengthsfor lower mass flows. Some differences can be attributed to outdoor environmental effects (i.e. wind speed) and uncertainties in jet flame shapes. The propane flame trajectory is predicted for a high Reynolds number case with Re = 12,500 and a low Reynolds number case where Re = 2,000. The Re=12,500 case which is momentum dominated matches well with the experimental flame trajectory, but the agreement for the bouancy driven low Reynolds number case is not as good. Dispersion modeling for unignited propane was also analyzed. We compared the mole fraction, mixture fraction, mean velocity, concentration half width, and inverse mass concentration over an axial distance from different credible journals to the values calculated by HyRAM+. The results display good agreement but generally, HyRAM+ predicts a wider profile for mole fraction and mixture fraction experiments. Overall, HyRAM+’s results are reasonable for predicting the flame length, heat flux, flame trajectory, and dispersion for propane and can be used in risk analyses
08 HYDROGEN↗