Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gust estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Aerodynamic Parameter Estimation Using Reconstructed Turbulence Measurements

A classical method for reconstructing atmospheric turbulence from onboard measurements of airdata and inertial sensors was improved and implemented for real-time computation. The reconstructed turbulence measurements were then included in a system identification analysis to estimate nondimensional stability and control derivatives in a longitudinal short period model using the maximum likelihood equation-error method in the frequency domain with Fourier-transform data. Flight test results using a subscale transport-type airplane showed that the power spectra for the reconstructed vertical gusts resembled the von Kármán turbulence model. Flight data in moderate and severe turbulence exhibited a decorrelation of the modeling data that increased the accuracy of parameter estimation results using the reconstructed turbulence. In particular, pitch rate and angle-of-attack rate derivatives could both be identified from flight data about straight and level flight without special maneuvers or prior information.

Jared A Grauer↗
NASA NTRS1995

State Estimation of Main Rotor Flap and Lead-Lag Using Accelerometers and Laser Transducers on the RASCAL UH-60 Helicopter

Modern rotorcraft flight control system designs which promise to yield high vehicle response bandwidth and good gust rejection can benefit from the use of rotor-state feedbacks. The measurement of main rotor blade motions is also desirable to validate and improve rotorcraft simulation models, to identify high-order linear flight dynamics models, to provide rotor system health monitoring; during flight test, and to provide for correlation with acoustic measurements from wind tunnel and flight tests. However, few attempts have been made to instrument a flight vehicle in this manner, and no previous system has had the robustness and accuracy required for these diverse applications. A rotor blade motion measurement and estimation system has been developed by NASA and the U.S. Army for use on the Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) helicopter. RASCAL is a UH-60 Blackhawk which is being modified at Ames Research Center in a phased development program for use in flight dynamics and controls, navigation, airspace management, and rotorcraft human factors research. The aircraft will feature a full-authority, digital, fly-by-wire research flight control system; a coupled ring laser gyro, differential GPS based navigation system; a stereoscopic color wide field of view helmet, mounted display; programmable panel mounted displays; and advanced navigation sensors. The rotor blade motion system is currently installed for data acquisition only, but will be integrated with the research flight control system when it is installed later this year.

Fletcher, Jay W.↗
NASA NTRS1973

Transient characteristics of simple systems to modulated random noise.

Discussed are the mean-square response exceedance characteristics of a single-tuned system to amplitude modulated noise. The results bear on the accuracy of spectral estimates of nonstationary data, and subsequently, relate directly to the design, analysis, and testing of structural systems in environments as gusts, earthquakes, and ignition transients. For noise correlated as an exponentially damped cosine, the nonstationary response may exceed its stationary value by a factor in excess of two. A time-varying shaping filter explanation is offered for this behavior. For white noise, such exceedances do not occur.

Barnoski, R. L.↗
NASA NTRS2018

Dynamics and Control of Quadcopter in Uncertain Environment

We consider problem of dynamics, control, and uncertainty quantification for quadcopter. We use the 6DOF model of quadcopter dynamics, linear quadratic regulator and linear quadratic Gaussian control of quadcopter in the presence of dynamical disturbances, measurement noise, hidden dynamical variables, dashing GPS signal, and wind gusts to predict quadcopter trajectory. We identify key sources of uncertainties and report on progress in development of a system that estimates the probability of safety-critical events using a set of algorithms based on the trajectory predictions.

uncertainty quantification↗
NASA NTRS1986

Design of a multivariable flutter control/gust load alleviation system

This paper discusses the use of eigenspace techniques for the design of an active flutter control/gust load alleviation system for a hypothetical research drone. One leading edge and two trailing edge aerodynamic surfaces are available for control. Full state control laws are designed for two combinations of control surfaces by selecting feedback gains which place closed loop eigenvalues and shape closed loop eigenvectors so as to stabilize wing flutter and reduce gust loads at the wing root while yielding acceptable robustness and satisfying constraints on rms control surface activity. These controllers are realized by state estimators designed using an eigenvalue placement/eigenvector shaping technique which results in recovery of the loop transfer characteristics of the full state feedback systems. The resulting feedback compensators are shown to perform almost as well as the full state designs. They also exhibit acceptable performance in situations in which the failure of an actuator is simulated.

Liebst, B. S.↗
NASA NTRS1987

Eigenspace techniques for active flutter suppression

The use of eigenspace techniques for the design of an active flutter suppression system for a hypothetical research drone is discussed. One leading edge and two trailing edge aerodynamic control surfaces and four sensors (accelerometers) are available for each wing. Full state control laws are designed by selecting feedback gains which place closed loop eigenvalues and shape closed loop eigenvectors so as to stabilize wing flutter and reduce gust loads at the wing root while yielding accepatable robustness and satisfying constrains on rms control surface activity. These controllers are realized by state estimators designed using an eigenvalue placement/eigenvector shaping technique which results in recovery of the full state loop transfer characteristics. The resulting feedback compensators are shown to perform almost as well as the full state designs. They also exhibit acceptable performance in situations in which the failure of an actuator is simulated.

Garrard, William L.↗
NASA NTRS1983

Simulation fidelity and numerosity effects in CDTI experimentation

Twenty pilot workload assessment techniques were compared using a simulated flying task in which three levels of psychomotor workload were imposed. The experiment was conducted in a three degree of freedom motion base simulator. Opinion measures, spare mental capacity measures, physiological measures, eye movement behavior and primary task performance measures were evaluated. The primary task was an instrument landing system (ILS) approach and landing. All measures were recorded between the outer and middle markers on the approach. Three levels of psychomotor load were obtained by the combined manipulation of wind gust disturbance level and simulated aircraft pitch stability. Six instrument rated general aviation pilots participated in the experiment. Cooper-Harper ratings, WCI/TE ratings, time estimation standard deviation, pulse rate mean, and control movements per unit time demonstrated sensitivity to psychomotor load. No intrusion into primary task performance was found that the sensitivities of workload estimation techniques vary widely, and that only a few techniques appear to be sensitive to psychomotor load.

Kreifeldt, J. G.↗
NASA NTRS1983

Evaluation of 20 workload measures using a psychomotor task in a moving-base aircraft simulator

The sensitivity and intrusion of 20 pilot workload assessment techniques were compared using a psychomotor loading task in a three degree-of-freedom moving-base aircraft simulator. The primary task was an instrument landing system approach and landing, with measures taken between the outer and middle markers. Three levels of psychomotor load were obtained by combined manipulation of random wind-gust disturbance level and pitch stability. Two rating scale measures and one control movement measure demonstrated sensitivity to all levels of load. Additionally, one time estimation measure and one pulse rate measure demonstrated sensitivity to some levels of load. No intrusion was found. The results of this experiment indicate that the sensitivities of workload estimation techniques vary widely, and that only a few techniques appear sensitive to psychomotor load.

Wierwille, W. W.↗
NASA NTRS1981

The NASA digital VGH program, early results

Data from airline digital flight data recorders provides relevant statistical data for estimating fatigue life consumption of the current airliner fleet and for design criteria updating for future designs. The data indicates real operating effects due to the autopilot, i.e., gust response frequency peak increase by 2 or 3 times, and the existence of the low frequency low amplitude limit cycle motion in altitude hold. The extension of more data types for ground operations is considered. Onboard processing of simple data types is also considered.

Crabill, N. L.↗
NASA NTRS2020

Mode-Based Sensing and Actuation Techniques for Multi-Objective Flexible Aircraft Control

Intelligent sensing and actuation designs are explored as a means to improve performance of a gust load alleviation control design for a flexible wing aircraft equipped with wing-shaping control surfaces. The proposed techniques rely on identification of the dominant structural modes during specified flight conditions and uses them as a basis for sensor placement and actuator utilization. Specifically, a strategy for sensor placement is discussed that uses target mode shape capture as a mean to improve state estimation quality. A second strategy that reduces the number of wing-shaping control inputs using mode and objective-based shape functions as virtual input channels is also presented. Both techniques are demonstrated in simulation of a flexible wing transport aircraft utilizing a multi-objective control system designed to suppress flexible motion, minimize gust and maneuver load, and reduce drag.

Hashemi, Kelley E.↗
NASA NTRS2013

Modal Filtering for Control of Flexible Aircraft

Modal regulators and deformation trackers are designed for an open-loop fluttering wing model. The regulators are designed with modal coordinate and accelerometer inputs respectively. The modal coordinates are estimated with simulated fiber optics. The robust stability of the closed-loop systems is compared in a structured singular-value vector analysis. Performance is evaluated and compared in a gust alleviation and flutter suppression simulation. For the same wing and flight condition two wing-shape-tracking control architectures are presented, which achieve deformation control at any point on the wing.

Shape Control↗
NASA NTRS1973

Study of dynamics of X-14B VTOL aircraft

Research was initiated to investigate certain facets of modern control theory and their integration with a digital computer to provide a tractable flight control system for a VTOL aircraft. Since the hover mode is the most demanding phase in the operation of a VTOL aircraft, the research efforts were concentrated in this mode of aircraft operation. Research work on three different aspects of the operation of the X-14B VTOL aircraft is discussed. A general theory for optimal, prespecified, closed-loop control is developed. The ultimate goal was optimal decoupling of the modes of the VTOL aircraft to simplify the pilot's task of handling the aircraft. Modern control theory is used to design deterministic state estimators which provide state variables not measured directly, but which are needed for state variable feedback control. The effect of atmospheric turbulence on the X-14B is investigated. A maximum magnitude gust envelope within which the aircraft could operate stably with the available control power is determined.

Loscutoff, W. V.↗
NASA NTRS1976

Terminal area guidance along curved paths: A stochastic control approach

Stochastic control theory is applied to the problem of designing a digital flight compensator for terminal guidance along a helical flight path as a prelude to landing. The development of aircraft, wind, and measurement models is discussed along with a control scheme consisting of feedback gains multiplying estimate of the aircraft and wind states obtained from a Kalman one step predictor. Preliminary results are presented which indicate that the compensator performs satisfactorily in the presence of both steady winds and gusts.

Quaranta, J. E.↗
NASA NTRS1980

Report of secondary flows, boundary layers, turbulence and wave team

Correspondence concerning the comparison of horizontal wind fields, two dimensional spectra, heat flux, mesoscale divergence and deformation in the prestorm environment, and thunderstorm gust front winds is presented. Other subjects include the use of radar to determine heating rate and evaporation near the Earth's surface for an unstable boundary layer and statistical considerations in the estimation of wind fields from single Doppler radar and application to prestorm boundary layer observations.

Doviak, R.↗
NASA NTRS1990

Synthesis of individual rotor blade control system for gust alleviation

The utilization of rotor flapping in synthesizing an Individual Blade Control (IBC) system for gust alleviation is demonstrated. The objective is to illustrate and seek to improve Ham's IBC method. A sensor arrangement with two accelerometers mounted on the root and tip of a blade is proposed for estimating of flapping states for feedback control. Equivalent swash plate implementation of IBC is also deliberated. The study concludes by addressing the concept of general rotor states feedback, of which the IBC method is a special case. The blade flapping equation of motion is derived. Ham's original IBC method and a modified IBC scheme called Model Reference (MRIBC) are examined, followed by simulation study with ideal measurements and relative performances of the two methods. The practical aspects of IBC implementation are presented. Different configuration of sensors and their merits are considered. The realization of IBC using equivalent swash plate instead of direct actuator motion is discussed. It is shown that IBC is a particular case of rotor states feedback. The idea of general rotor states feedback is further elaborated. Finally, major conclusions are given.

Wang, Ji C.↗
NASA NTRS1992

Wind-induced dynamics of the deep space network antennas

Accurate spacecraft tracking by the NASA Deep Space Network (DSN) antennas must be assured during changing weather conditions. Wind disturbances are the main source of tracking errors. This paper presents the development of a wind force model, and simulations of wind-induced pointing errors of DSN antennas. The antenna model includes the antenna structure, the elevation and azimuth servos, and the tracking controller. Simulation results show that pointing errors due to wind gusts are of the same order as due to wind static pressure, and that (similarly to the static wind pressure) these errors satisfy the velocity quadratic law. The methodology presented is used for wind disturbance estimation, and for design of an antenna controller with wind disturbance rejection properties.

Gawronski, W.↗
NASA NTRS1986

The design of a turboshaft speed governor using modern control techniques

The objectives of this program were: to verify the model of off schedule compressor variable geometry in the T700 turboshaft engine nonlinear model; to evaluate the use of the pseudo-random binary noise (PRBN) technique for obtaining engine frequency response data; and to design a high performance power turbine speed governor using modern control methods. Reduction of T700 engine test data generated at NASA-Lewis indicated that the off schedule variable geometry effects were accurate as modeled. Analysis also showed that the PRBN technique combined with the maximum likelihood model identification method produced a Bode frequency response that was as accurate as the response obtained from standard sinewave testing methods. The frequency response verified the accuracy of linear models consisting of engine partial derivatives and used for design. A power turbine governor was designed using the Linear Quadratic Regulator (LQR) method of full state feedback control. A Kalman filter observer was used to estimate helicopter main rotor blade velocity. Compared to the baseline T700 power turbine speed governor, the LQR governor reduced droop up to 25 percent for a 490 shaft horsepower transient in 0.1 sec simulating a wind gust, and up to 85 percent for a 700 shaft horsepower transient in 0.5 sec simulating a large collective pitch angle transient.

Delosreyes, G.↗
NASA NTRS1983

Waterspout, Gust Fronts and Associated Cloud Systems

Nine waterspouts observed on five experimental days during the GATE period of observations are discussed. Primary data used are from 2 aircraft flying in different patterns, one above the other between 30 and 300 m. There is strong evidence associating whirl initiation with cumulus outflow. Computations prepared from estimates of convergence with the region suggest the possibility of vortex generation within 4 minutes. This analysis supports (1) the importance cumulus outflows may have in waterspout initiation and (2) the possibility that sea surface temperature gradients may be important in enabling waterspout development from modest size cumuli.

Simpson, J.↗