Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gravity-assist”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

ICE navigation support

The International Cometary Explorer (ICE) encounter with Comet Giacobini-Zinner took place 7 years after the spacecraft's original launch on 12 August 1978 as the International Sun Earth Explorer 3 (ISEE-3), part of a three-spacecraft project to study the interaction between the solar wind and the Earth's magnetosphere. Transfer to an interplanetary trajectory was performed via a 119-km-altitute, gravity-assist, lunar swingby on December 1983. Navigation support during interplanetary cruise and comet encounter was provided by orbit determination utilizing radio metric data from the DSN 64-meter antennas in Goldstone, California and Madrid, Spain. Orbit solutions yielding predictions of 50-km geocentric delivery accuracy in the target aim plane were achieved during interplanetary cruise and at comet encounter using 6-to-12-week data arcs between periodic attitude-change maneuvers. One-sigma two-way range and range rate residuals were consistently 40 meters and 0.2 mm/s or better, respectively. Non-gravitational forces affected the comet's motion during late August and early September 1985 and caused a 2300-km shift in the orbit of the comet relative to the spacecraft. This necessitated a final ICE orbit trim maneuver 3 days prior to encounter. Near-real-time assessment of two-way 2-GHz (S-band) Doppler pseudo-residuals during the June and July 1985 trajectory change maneuvers aided in calibration of the spacecraft's thrusters in preparation for this final critical maneuver. Post-flight analysis indicates tail centerline passage was achieved within 10 seconds of the predicted time and geocentric position uncertainty at encounter was less than 40 km.

Efron, L.↗
NASA NTRS1986

Libration-point staging concepts for Earth-Mars transportation

The use of libration points as transfer nodes for an Earth-Mars transportation system is briefly described. It is assumed that a reusable Interplanetary Shuttle Vehicle (ISV) operates between the libration point and Mars orbit. Propellant for the round-trip journey to Mars and other supplies would be carried from low Earth orbit (LEO) to the ISV by additional shuttle vehicles. Different types of trajectories between LEO and libration points are presented, and approximate delta-V estimates for these transfers are given. The possible use of lunar gravity-assist maneuvers is also discussed.

Robert Farquhar↗
NASA NTRS1987

Alternative cometary targets for the Giotto extended mission

The plan to use an Earth gravity-assist maneuver to redirect the Giotto spacecraft toward Comet Grigg-Skjellerup (GS) for an encounter in July 1992, and 2 additional cometary opportunities are discussed. The first is an encounter with Comet Hartley-2 (H2) in Aug., 1991. The H2 is intrinsically brighter than GS and the encounter would take place much closer to the Earth. The other potential target is Comet du Toit-Hartley (DTH), which is of considerable scientific interest because it split into 2 pieces during its 1979 apparition. Ths GS and H2 missions are the most viable; DTH is eliminated because its aphelion of transfer orbit and Sun distance at encounter (both 1.2 AU) are incompatible with Giotto's degraded thermal insulation.

Farquhar, R. W.↗
NASA NTRS1987

Comet Rendezvous Asteroid Flyby - First Mariner Mark II

The Mariner Mark II, a novel, low-cost series of spacecraft, will find its initial use during the Comet Rendezvous Asteroid Flyby (CRAF) Project; the spacecraft is expected to obtain the first observations of asteroids, and to return over three years' worth of detailed science data from the vicinity of Comet Tempel 2. The second Mariner Mark II spacecraft, designated 'Cassini' will incorporate an ESA Titan probe. Attention is given to a possible solar/electric earth gravity-assist trajectory for a mission to Tempel 2.

Draper, Ron↗
NASA NTRS1988

Teaching old spacecraft new tricks

The technique of sending existing space probes on extended mission by altering their orbital paths with gravity-assist maneuvers and relatively brief rocket firings is examined. The use of the technique to convert the International Sun-Earth Explorer 3 mission into the International Cometary Explorer mission is discussed. Other examples are considered, including the extension of the Giotto mission and the retargeting of the Sakigake spacecraft. The original and altered trajectories of these three missions are illustrated.

Farquhar, Robert↗
NASA NTRS1988

Trajectories for the Sakigake extended-mission phase

The trajectory profile that will be used by Japan's Sakigake spacecraft to accomplish its extended-mission objectives is described. Currently, Sakigake is following a heliocentric trajectory that will return to the earth's vicinity in January 1992. Four earth gravity-assist maneuvers are planned to redirect Sakigake to an encounter with Comet Honda-Mrkos-Pajdusakova (HMP) in February 1996. While carrying out the earth-swingby maneuvers, the spacecraft will make several passes through previously unexplored regions of the distant geomagnetic tail.

Farquhar, R.↗
NASA NTRS1989

Effects of a Venus swingby periapsis burn during an earth-Mars trajectory

Interplanetary missions were analyzed that utilize the gravity-assist orbital transfer technique to increase mission capabilities. This swingby maneuver provides a nonpropulsive change in the spacecraft's heliocentric energy which can reduce the amount of propellant needed to complete an interplanetary mission. For certain planetary orientations, incorporating a propulsive manuever at the periapsis of the swingby trajectory decreases the mission's propellant requirement. This decrease results in a reduced initial vehicle mass in low-earth orbit. This study analyzed the feasibility of using a three-dimensional powered swingby to reduce the initial vehicle size for an excursion class mission during the 2010-2025 time frame.

Striepe, Scott A.↗
NASA NTRS1989

Ulysses - The first high-latitude heliospheric mission

The Ulysses mission will, for the first time, explore the heliosphere within a few astronomical units of the sun over the full range of heliographic latitudes, thereby providing the first characterization of the uncharted third dimension. Highly sophisticated scientific instrumentation carried on board the spacecraft is designed to measure the properties of the solar wind, the sun/wind interface, the heliospheric magnetic field, solar radio bursts and plasma waves, solar X-rays, solar and galactic cosmic rays, and interplanetary/interstellar neutral gas and dust. This collaborative ESA/NASA mission, scheduled for launch in October 1990, will use a Jupiter gravity-assist to achieve a trajectory extending to high solar latitudes /1,2/.

Wenzel, K.-P.↗
NASA NTRS1989

The Voyager Neptune travel guide

The Voyager mission to the giant outer planets of our solar system is described. Scientific highlights include interplanetary cruise, Jupiter, Saturn, Uranus, and their vast satellite and ring systems. Detailed plans are provided for the August 1989 Neptune encounter and subsequent interstellar journey to reach the heliopause. As background, the elements of an unmanned space mission are explained, with emphasis on the capabilities of the spacecraft and the scientific sensors. Other topics include the Voyager Grand Tour trajectory design, deep-space navigation, and gravity-assist concepts. The Neptune flyby is animated through the use of computer-generated, flip-page movie frames that appear in the corners of the publication. Useful historical information is also presented, including facts associated with the Voyager mission. Finally, short summaries are provided to describe the major objectives and schedules for several space missions planned for the remainder of the 20th century.

Kohlhase, Charles↗
NASA NTRS1989

Application of the pseudostate theory to the three-body Lambert problem

The pseudostate theory, which approximates three-body trajectories by overlapping the conic effects of both massive bodies on the third body, has been used to solve boundary-value problems. Frequently, the approach to the secondary is quite close, as in interplanetary gravity-assist or satellite-tour trajectories. In this case, the orbit with respect to the primary is radically changed so that perturbation techniques are time consuming, yet higher accuracy than point-to-point conics is necessary. This method reduces the solution of the three-body Lambert problem to solving two conic Lambert problems and inverting a 7 x 7 matrix, the components of which are all found analytically. Typically 90-95 percent of the point-to-point conic error, with respect to an integrated trajectory, is eliminated.

Byrnes, Dennis V.↗
NASA NTRS1989

Preliminary design for a proposed Saturn mission with a second Galileo spacecraft

A study has been performed to assess the feasibility of using a second Galileo spacecraft for a Titan-probe/Saturn-orbiter mission that would be launched on a Shuttle/Centaur in the early 1990s. The interplanetary transfer is accomplished by means of a Delta-V earth-gravity-assist trajectory with a 3-year flight time from launch to earth flyby. Just prior to arrival at Saturn, the Titan probe is released, and the orbiter is used to relay data from the probe back to earth as it performs a close gravity-assist flyby of Titan. The orbiter then conducts a satellite tour containing multiple encounters with Saturn's satellites. Discussed in detail are the optimal trajectory design, Saturn approach trajectory design (Titan flyby, probe relay, and initial orbit selection), satellite tour design, and mission performance.

D'Amario, Louis A.↗
NASA NTRS1989

Solar probe mission status

The penetration of coronal regions by a solar probe employing planetary gravity-assist trajectories to attain perihelia of only a few solar radii will allow unique in situ experiments to be conducted. The trajectory design options will fundamentally impact solar probe spacecraft design criteria. The aerogravity-assist method, which requires the bending of a trajectory in the vicinity of a planet by passing through a portion of its atmosphere will yield large changes in direction and velocity. This option would in the case of a solar probe mission involve the use of either the earth or Venus as a target for a specially aerodynamically configured 'waverider' spacecraft with L/D of the order of 10.

Randolph, J. E.↗
NASA NTRS1991

The design of hypersonic waveriders for aero-assisted interplanetary trajectories

The aerodynamic performance of a vehicle designed to execute an aerogravity assisted maneuver, which combines a gravitational turn with a low-drag atmosphere pass, is examined. The advantage of the aerogravity assisted maneuver, as opposed to a more traditional gravity-assist trajectory, is that, through the use of a controlled atmospheric flight, nearly any deflection angle around a gravitating body can be realized. This holds the promise of providing extremely large values of Delta V. The success of such a maneuver depends on being able to design a vehicle which can execute sustained atmospheric flight at Mach numbers in the range of 50 - 100 with minimal drag losses. Some simple modeling is used to demonstrate design rules for the design of such vehicles, and to estimate the deterioration of their performance during the flight. Two sample aerogravity-assisted maneuvers are detailed, including a close solar approach requiring modest Delta V, and a sprint mission to Pluto.

Lewis, Mark J.↗
NASA NTRS1990

The Galileo mission earth encounters - An earth remote sensing perspective

After its Venus-Earth-Earth Gravity Assist trajectory, the Galileo spacecraft will arrive at Jupiter in 1995. The gravity-assist portion of the mission, however, will allow the spacecraft, which is equipped with a unique set of remote-sensing instruments, to observe earth from 970 km during its December 1990 approach, and from as little as 304 km in its second and last approach of December, 1992. An evaluation is presented of the role that the Galileo instrument suite can play in these earth encounters in virtue of their outstanding spectral and spatial resolutions.

Ocampo, Adriana↗
NASA NTRS1991

The last grand tour opportunity to Pluto

An automated mission design program permits a thorough examination of gravity-assist trajectories such as the Voyager II flight to Jupiter, Saturn, Uranus and Neptune. The program is applied to the automated design of multiple encounter trajectories to the far outer planets. The most significant result is that the last four-planet grand tour opportunity occurs in 1996 and includes encounters with Jupiter, Uranus, Neptune and Pluto. Other mission designs include Jupiter and one or two other planets and have characteristically short flight times.

Longuski, J. M.↗
NASA NTRS1991

Giotto's mission to planet earth

The Giotto spacecraft was reactivated in February 1990 and performed the first-ever earth gravity-assisted maneuver on July 2, 1990 to be retargeted for Comet P/Grigg-Skjellerup. This swing-by is of unique scientific interest due to Giotto's hyperbolic, high-inclination orbit. This paper reports on scientific results of the Giotto magnetic field experiment. Due to the high fly-by velocity and the relative quietness of the magnetosphere during the swing-by period, these measurements present a snapshot view of the earth magnetosphere with clearly identified inbound and outbound bow shock and magnetopause crossings. The outbound crossings are of particular interest as surface waves at the polar magnetopause at a distance of 28 earth radii as well as a strong quasi-perpendicular bow shock at a distance of about 64 earth radii are observed.

Glassmeier, K.-H.↗
NASA NTRS1991

Rapid design of gravity assist trajectories

Several International Solar-Terrestrial Physics (ISTP) missions require the design of complex gravity-assisted trajectories in order to investigate the interaction of the solar wind with the earth's magnetic field. These trajectories present a formidable trajectory design and optimization problem. This paper discusses the philosophy and methodology that enable an analyst to design and analyze such trajectories. The authors describe what is called 'floating end-point' targeting, which allows the inherently nonlinear multiple body problem to be solved with simple linear techniques. This paper demonstrates how floating end-point targeting combines analytic approximations with a Newton method targeter to achieve trajectory design goals quickly, even for the very sensitive double lunar swingby trajectories used by the ISTP missions. A Multiconic orbit integration scheme allows fast and accurate orbit propagation. This paper also describes a prototype software tool, Swingby, which has been built for trajectory design and launch window analysis.

Carrico, J.↗
NASA NTRS1987

An experimental investigation of film condensation in porous structures

Local heat flux measurements are made using thermoelectric devices along a condenser section of a gravity-assisted heat pipe filled with porous media. Freon 113 is used as the working fluid in runs made with both constant-porosity and variable-porosity porous media, specifically, fibrous material and packed spheres. The experimental results can be correlated in a simple manner in terms of two new dimensionless groups based on the Nusselt number and the distance from the top of the condenser section.

White, S. M.↗