Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gravity environment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Nature of buoyancy-driven flows in a reduced-gravity environment

The role of buoyancy-driven convection in reduced-gravity environments has been emphasized. It is shown that for some materials-processing experiments the values of the fundamental dimensionless parameters such as Gr or Ra are shifted from the very large (ground-based values) to moderately large (space-based values). As a consequence, in cases where approximate analytical solutions are desired, the accuracy of the usual asymptotic (boundary-layer) analysis in which infinitely large parametric ranges are assumed is reduced. Approximate analytical techniques for refinement of the asymptotic solutions are identified that will extend the accuracy to the moderately large parametric ranges associated with space-based processing.

Kassemi, Siavash A.↗
NASA NTRS1991

Active member vibration control experiment in a KC-135 reduced gravity environment

An active member vibration control experiment in a KC-135 reduced gravity environment was carried out by the Air Force Flight Dynamics Laboratory and the Jet Propulsion Laboratory. Two active members, consisting of piezoelectric actuators, displacement sensors, and load cells, were incorporated into a 12-meter, 104 kg box-type test structure. The active member control design involved the use of bridge (compound) feedback concept, in which the collocated force and velocity signals are feedback locally. An impact-type test was designed to accommodate the extremely short duration of the reduced gravity testing window in each parabolic flight. The moving block analysis technique was used to estimate the modal frequencies and dampings from the free-decay responses. A broadband damping performance was demonstrated up to the ninth mode of 40 Hz. The best damping performance achieved in the flight test was about 5 percent in the fourth mode of the test structure.

Lawrence, C. R.↗
NASA NTRS1963

Proposal for Determining the Mass of Liquid Propellant Within a Space Vehicle Propellant Tank Subjected to a Zero Gravity Environment

A liquid propellant mass measurement system is proposed for the zero gravity environment. The known thermodynamic relationships for the liquid propellant and helium gas concomitant with state of the art instrumentation are used to provide a system comparable with present day terrestrial mass measuring systems. In particular, the operation of the system is outlined for the propellant transfer method and for the determination of leaks and leakage rates. A second concept which is a simplified version of the proposed mass measurement system is introduced and discussed.

PROPELLANT TANK↗
NASA NTRS1990

Apparatus for mixing solutions in low gravity environments

An apparatus is disclosed for allowing mixing of solutions in low gravity environments so as to carry out crystallization of proteins and other small molecules or other chemical syntheses, under conditions that maximize crystal growth and minimize disruptive turbulent effects. The apparatus is comprised of a housing, a plurality of chambers, and a cylindrical rotatable valve disposed between at least two of the chambers, said valve having an internal passageway so as to allow fluid movement between the chambers by rotation of the valve. In an alternate embodiment of the invention, a valve is provided having an additional internal passage way so that fluid from a third chamber can be mixed with the fluids of the first two chambers. This alternate embodiment of the invention is particularly desirable when it is necessary to provide a termination step to the crystal growth, or if a second synthetic step is required.

Carter, Daniel C.↗
NASA NTRS1992

A study to explore locomotion patterns in partial gravity environments

An effort is made to ascertain the factors affecting stability during locomotion in lunar and Martian gravity environments, as well as to establish criteria for the enhancement of stability and traction. The effects of changing both the speed and the pattern of locomotion under three different gravity conditions were investigated. As gravity level increased, vertical and horizontal forces significantly declined; similarities were noted across gravity levels, however, with respect to locomotion speed and pattern changes, where increasing speed enhanced both vertical and horizontal forces. With decreasing gravity, the ratio of horizontal to vertical forces increased significantly.

Rajulu, Sudhakar L.↗
NASA NTRS1974

Drop coalescence in zero-gravity environment of Skylab IV

A series of experiments in cloud physics and fluid mechanics at near zero-gravity environment were made during NASA's Skylab IV mission. Color photographs taken aboard demonstrate the impaction and coalescence of two water drops of equal diameter and different color. Plans for a zero-gravity cloud physics laboratory for the Space Shuttle are indicated.

Vaughan, O. H.↗
NASA NTRS1991

Modeling of jet-induced geyser formation in a reduced gravity environment

Flow patterns predicted by a computational model of jet-induced geyser formation in a reduced gravity environment are presented and comparison is made to patterns predicted by experimentally based correlations. The configuration studied is an idealization of a forthcoming flight experiment to examine cryogenic propellant management issues. A transitional version of the ECLIPSE code used as a computational tool for the analyses is described. It is shown that computationally predicted flow patterns are in qualitative agreement with the correlation-based predictions, and some details of the predicted flow fields are given.

Wendl, M. C.↗
NASA NTRS2012

Modified Process Reduces Porosity when Soldering in Reduced Gravity Environments

A modified process yields lower levels of internal porosity for solder joints produced in reduced-gravity environments. The process incorporates both alternative materials and a modified procedure. The process provides the necessary cleaning action to enable effective bonding of the applied solder alloy with the materials to be joined. The modified process incorporates a commercially available liquid flux that is applied to the solder joint before heating with the soldering iron. It is subsequently heated with the soldering iron to activate the cleaning action of the flux and to evaporate most of the flux, followed by application of solder alloy in the form of commercially available solid solder wire (containing no flux). Continued heating ensures adequate flow of the solder alloy around and onto the materials to be joined. The final step is withdrawal of the soldering iron to allow alloy solidification and cooling of the solder joint.

Watson, Kevin↗
NASA NTRSDate not supplied

Early Fire Detection System for Partial and Low Gravity Environments

We present preliminary results on the development of a fire detection system for partial and low gravity environments. A significant challenge is the design of a system with a low false alarm rate. The detection system therefore has to discriminate between combustion particles, cabin, and lunar dust. Aerosol properties are measured and cross referenced to the target detectors at the Gases and Aerosols from Smoldering Polymers (GASP) Laboratory located at the NASA Glenn Research Center. A computational fluid dynamics plume model is also employed to determine the smoke transport properties of the targeted habitats.

Early fire detectioin↗
NASA NTRS1987

Prediction of physical workload in reduced gravity environments

The background, development, and application of a methodology to predict human energy expenditure and physical workload in low gravity environments, such as a Lunar or Martian base, is described. Based on a validated model to predict energy expenditures in Earth-based industrial jobs, the model relies on an elemental analysis of the proposed job. Because the job itself need not physically exist, many alternative job designs may be compared in their physical workload. The feasibility of using the model for prediction of low gravity work was evaluated by lowering body and load weights, while maintaining basal energy expenditure. Comparison of model results was made both with simulated low gravity energy expenditure studies and with reported Apollo 14 Lunar EVA expenditure. Prediction accuracy was very good for walking and for cart pulling on slopes less than 15 deg, but the model underpredicted the most difficult work conditions. This model was applied to example core sampling and facility construction jobs, as presently conceptualized for a Lunar or Martian base. Resultant energy expenditures and suggested work-rest cycles were well within the range of moderate work difficulty. Future model development requirements were also discussed.

Goldberg, Joseph H.↗
NASA NTRS1987

Results from a compound semiconductor crystal growth experiment in a low gravity environment

A directional solidification experiment in the compound semiconductor lead tin telluride has been carried out in a low-gravity environment on board the Space Shuttle during a flight in October, 1985. Optical etching techniques and concentration profiles from wavelength dispersive electron microscopy indicate that there was a significant amount of convection during the solidifcation of the sample. A preliminary hypothesis of this result, that even at gravity levels on the order of 0.0001 g, the convective forces can be significant compared to mass transport due to diffusion, is being tested.

Crouch, Roger K.↗