Effect of residual gas composition on the fatigue behavior of aluminum.
Fatigue behavior of aluminum in reduced partial pressures of oxygen, water and hydrogen, noting residual gas atmosphere role
Hordon, M. J.↗
SEARCH · Engineering Papers
Results for “gas composition”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Axial- and radial-resolved electron density and excitation temperature of aluminum plasma induced by nanosecond laser: Effect of the ambient gas composition and pressure
The spatial variation of the characteristics of an aluminum plasma induced by a pulsed nanosecond XeCl laser is studied in this paper. The electron density and the excitation temperature are deduced from time- and space- resolved Stark broadening of an ion line and from a Boltzmann diagram, respectively. The influence of the gas pressure (from vacuum up to atmospheric pressure) and compositions (argon, nitrogen and helium) on these characteristics is investigated. It is observed that the highest electron density occurs near the laser spot and decreases by moving away both from the target surface and from the plume center to its edge. The electron density increases with the gas pressure, the highest values being occurred at atmospheric pressure when the ambient gas has the highest mass, i.e. in argon. The excitation temperature is determined from the Boltzmann plot of line intensities of iron impurities present in the aluminum target. The highest temperature is observed close to the laser spot location for argon at atmospheric pressure. It decreases by moving away from the target surface in the axial direction. However, no significant variation of temperature occurs along the radial direction. The differences observed between the axial and radial direction are mainly due to the different plasma kinetics in both directions.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
The Impact of ENSO on Trace Gas Composition in the Upper Troposphere to Lower Stratosphere
The El Nino-Southern Oscillation (ENSO) is the dominant mode of interannual variability in the tropical troposphere and its effects extend well into the stratosphere. Its impact on atmospheric dynamics and chemistry cause important changes to trace gas constituent distributions. A comprehensive suite of satellite observations, reanalyses, and chemistry climate model simulations are illuminating our understanding of processes like ENSO. Analyses of more than a decade of observations from NASAs Aura and Aqua satellites, combined with simulations from the Goddard Earth Observing System Chemistry-Climate Model (GEOSCCM) and other Chemistry Climate Modeling Initiative (CCMI) models, and the Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) reanalysis have provided key insights into the response of atmospheric composition to ENSO. While we will primarily focus on ozone and water vapor responses in the upper troposphere to lower stratosphere, the effects of ENSO ripple through many important trace gas species throughout the atmosphere. The very large 2015-2016 El Nino event provides an opportunity to closely examine these impacts with unprecedented observational breadth. An improved quantification of natural climate variations, like those from ENSO, is needed to detect and quantify anthropogenic climate changes.
ENSO↗
The Gas Composition and Deep Cloud Structure of Jupiter's Great Red Spot
We have obtained high-resolution spectra of Jupiter's Great Red Spot (GRS) between 4.6-5.4 microns using telescopes on Mauna Kea to derive gas abundances and to constrain its cloud structure between 0.5-5 bars. We used line profiles of deuterated methane (CH3D) at 4.66 microns to infer the presence of an opaque cloud at 5 plus or minus 1 bars. From thermochemical models, this is almost certainly a water cloud. We also used the strength of Fraunhofer lines in the GRS to obtain the ratio of reflected sunlight to thermal emission. The level of the reflecting layer was constrained to be at 570 plus or minus 30 millibars based on fitting strong NH3 lines at 5.32 microns. We identify this layer as an ammonia cloud based on the temperature where gaseous NH3 condenses. We found evidence for a strongly absorbing but not totally opaque cloud layer at pressures deeper than 1.3 bars by combining Cassini/CIRS (Composite Infrared Spectrometer) spectra of the GRS at 7.18 microns with ground-based spectra at 5 microns. This is consistent with the predicted level of an NH4SH cloud. We also constrained the vertical profile of H2O and NH3. The GRS spectrum is matched by a saturated H2O profile above an opaque water cloud at 5 bars. The pressure of the water cloud constrains Jupiter's O/H ratio to be at least 1.1 times solar. The NH3 mole fraction is 200 plus or minus 50 ppm (parts per million) for pressures between 0.7-5 bars. Its abundance is 40 ppm at the estimated pressure of the reflecting layer. We obtained 0.8 plus or minus 0.2 ppm for PH3, which is a factor of 2 higher than in the warm collar surrounding the GRS. We detected all five naturally occurring isotopes ofgermanium in GeH4 in the GRS. We obtained an average value of 0.35 plus or minus 0.05 ppb (parts per billion) for GeH4. Finally, we measured 0.8 plus or minus 0.2 ppb for CO in the deep atmosphere.
Bjoraker, G. L.↗
Clouds and wet removal as causes of variability in the trace-gas composition of the marine troposphere
A modeling study of the effects of clouds and wet removal on the chemistry of the remote marine troposphere is described. Using a time-dependent model with parameterized vertical transport to calculate trace-gas concentrations, it is found that large variations in key species (e.g., HNO3, H2CO, and H2O2) result from simulations of sporadic rainfall, changes in cloud cover, and external inputs such as surface NO sources. Depending on the frequency and intensity of an event, the effects of these perturbations may persist for several days, thereby invalidating assumptions of photochemical equilibrium in the interpretation of measurements. Long-term integrations with fixed boundary conditions and regularly occurring cloud and rain episodes demonstrate a strong sensitivity of the mean concentration of longer-lived soluble gases to precipitation frequency but also confirm the validity of using properly chosen parameterizations of wet removal in steady state calculations.
Thompson, A. M.↗
PDMS ‐silica composite gas separation membranes by direct ink writing
Abstract Polydimethylsiloxane (PDMS)‐based membranes containing amine‐functionalized and unfunctionalized silica particles were fabricated via direct ink writing for CO 2 /N 2 gas separation. The printability of the inks was evaluated by rheological measurements, while spectroscopy, microscopy, thermal measurements, and mechanical testing were employed to characterize the printed membranes. The surface morphology of the membranes revealed the absence of voids, demonstrating their suitability for gas separation. The printed membranes also exhibited desirable thermal and mechanical properties (i.e., thermal degradation temperature of 518 °C and tensile strength as high as 1.178 MPa with 529% elongation). The PDMS‐based membranes generally displayed high permeability for CO 2 but slightly low selectivity for the CO 2 /N 2 gas pair. The best‐combined permeability‐selectivity performance of 8794 barrer and selectivity of 11.64 was demonstrated by the printed PDMS membrane containing no SiO 2 fillers. The inclusion of unfunctionalized SiO 2 particles generally increased the membrane's gas permeability but compromised the selectivity. In contrast, membranes with amine‐functionalized silica showed improved selectivity compared to membranes containing unfunctionalized silica. Overall, the performance and characteristics offered by the PDMS/silica composite membranes demonstrated the potential of 3D printing as an economical and sustainable fabrication approach to developing materials for carbon capture applications.
Gutierrez, Dianne B.↗
Gas Composition Sensing Using Carbon Nanotube Arrays
This innovation is a lightweight, small sensor for inert gases that consumes a relatively small amount of power and provides measurements that are as accurate as conventional approaches. The sensing approach is based on generating an electrical discharge and measuring the specific gas breakdown voltage associated with each gas present in a sample. An array of carbon nanotubes (CNTs) in a substrate is connected to a variable-pulse voltage source. The CNT tips are spaced appropriately from the second electrode maintained at a constant voltage. A sequence of voltage pulses is applied and a pulse discharge breakdown threshold voltage is estimated for one or more gas components, from an analysis of the current-voltage characteristics. Each estimated pulse discharge breakdown threshold voltage is compared with known threshold voltages for candidate gas components to estimate whether at least one candidate gas component is present in the gas. The procedure can be repeated at higher pulse voltages to estimate a pulse discharge breakdown threshold voltage for a second component present in the gas. The CNTs in the gas sensor have a sharp (low radius of curvature) tip; they are preferably multi-wall carbon nanotubes (MWCNTs) or carbon nanofibers (CNFs), to generate high-strength electrical fields adjacent to the tips for breakdown of the gas components with lower voltage application and generation of high current. The sensor system can provide a high-sensitivity, low-power-consumption tool that is very specific for identification of one or more gas components. The sensor can be multiplexed to measure current from multiple CNT arrays for simultaneous detection of several gas components.
Li, Jing↗
Modeling and validation of single-chamber microbial fuel cell cathode biofilm growth and response to oxidant gas composition
This work describes experiments and computational simulations to analyze single-chamber, air-cathode microbial fuel cell (MFC) performance and cathodic limitations in terms of current generation, power output, mass transport, biomass competition, and biofilm growth. Steady-state and transient cathode models were developed and experimentally validated. Two cathode gas mixtures were used to explore oxygen transport in the cathode: the MFCs exposed to a helium-oxygen mixture (heliox) produced higher current and power output than the group of MFCs exposed to air or a nitrogen-oxygen mixture (nitrox), indicating a dependence on gas-phase transport in the cathode. Multi-substance transport, biological reactions, and electrochemical reactions in a multi-layer and multi-biomass cathode biofilm were also simulated in a transient model. The transient model described biofilm growth over 15 days while providing insight into mass transport and cathodic dissolved species concentration profiles during biofilm growth. Lastly, simulation results predict that the dissolved oxygen content and diffusion in the cathode are key parameters affecting the power output of the air-cathode MFC system, with greater oxygen content in the cathode resulting in increased power output and fully-matured biomass.
59 BASIC BIOLOGICAL SCIENCES↗
Effect of Gas Composition on the Ablation Behavior of a Charring Material
Ablation behavior of charring material in high velocity streams of arc heated air, nitrogen, and argon
GAS STREAM↗
Deconvoluting the Combined Effects of Gas Composition and Temperature on Olefin Selectivity for Separations Using Silver(I) Ions in Ionic Liquids
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Tropospheric gas composition and cloud structure of the Jovian North Equatorial Belt
Voyager IRIS observations of the NEB reveal longitudinal variability of 5-micron brightness temperatures of order 100 C. An anisotropic multiple scattering radiative transfer model is used to calculate synthetic spectra for comparison with the IRIS observations. Mie theory is used to model the spectral dependence of cloud extinction from 180 to 2300/cm. Cloud base locations within the model vary with assumed gas abundances according to thermochemical equilibrium. It is found that spatial variations in the abundance profiles of the condensible species, parahydrogen profiles and cloud optical depths can be used as tracers of the local and large-scale dynamics. The variation of cloud opacity is strongly correlated with the variation of relative humidity, which suggests that dynamic depletion of water vapor above the cloud forming level is the most plausible model to explain the spatial variation in the water profile within the NEB.
Carlson, Barbara E.↗
Determining Gas Composition for Growth of BNNTs Using Thermodynamic Approach
A high-yield production of high-quality boron-nitride nanotubes (BNNTs) was reported recently in several publications. A boron-rich material is evaporated by a laser or plasma in a nitrogen-rich atmosphere to supply...
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
The role of gas composition in plasma-dust structures in RF discharge
The influence of a mixture of light and heavy gases, i.e., helium and argon, on plasma-dust structures in the radiofrequency discharge has been studied. The dust chains in the sheath of the radiofrequency discharge, the average distance between the dust particles and their chains, have been analyzed. A significant effect of small amounts of argon on the correlation characteristics of dust particles has been observed. The results of numerical simulation of ion and electron drift in the mixture of helium and argon are presented. It is shown that even 1% of argon admixture to helium produces such an effect that argon ions become the main components of the discharge, as they drift with lightweight helium forming a strongly anisotropic velocity distribution function.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Influence of Pyrolysis Gas Composition and Reaction Kinetics on Leaf-Scale Fires
Not provided.
Energy & Fuels↗
Role of gas composition in weakened nonlinear standing wave excitation and improved plasma radial uniformity in very-high-frequency asymmetric capacitive Ar/CF 4 discharges
Abstract The higher harmonics generated by nonlinear sheath motion would enhance the standing wave effect, and thus lead to center-peaked plasma density profile in very-high-frequency (VHF) capacitive discharges. In this work, a nonlinear transmission line (NTL) model introduced in Zhouet al(2021Plasma Sources Sci. Technol.30125017) has been extended, with radial transport of various particles and nonlinear sheath motion into account, to investigate the effects of CF 4 fraction α on the nonlinear standing wave excitation and plasma radial uniformity in VHF (60 MHz) capacitively coupled Ar/CF 4 plasmas at 3 Pa. The results indicate that for pure Ar discharges (i.e. α = 0%), the nonlinearly excited harmonics with short wavelength significantly enhance the electron power absorption at the radial center, resulting in a pronounced central-high plasma density profile. As α increases, the high-order harmonics are gradually damped due to the increase of resistance, as well as the longer wavelength caused by thicker sheath thickness. Thus, the radial profile of the electron absorbed power density shifts from center-peak to edge-high. Besides, at the radial center, the electron density and Ar + ion density decrease with α , CF 3 + ion density shows an increasing trend, while F − ion density initially rises and then decreases. Moreover, the density profiles of all the species become more uniform at higher CF 4 fraction, due to the suppressed nonlinear standing wave excitation and the longer wavelength of the nonlinear harmonics.
Physics↗
AN INVESTIGATION OF THE EFFECT OF GAS COMPOSITION ON THE ABLATION BEHAVIOR OF A CHARRING MATERIAL
Chemical interaction between an ablation system, a charring material and high-velocity streams of arc-heated air, nitrogen, and argon
HEAT TRANSFER↗
A neutral and ion mass spectrometer for environmental gas composition of the Apollo telescope mount, experiment no. T-030 Final report
Neutral and ion spectrometer to determine composition and distribution of contaminating gases from Apollo Telescope Mount
Hinton, B. B.↗
Venus upper atmosphere neutral gas composition - First observations of the diurnal variations
Measurements of the composition, temperature, and diurnal variations of the major neutral constituents in the thermosphere of Venus are being made with a quadrupole mass spectrometer on the Pioneer Venus Orbiter. Concentrations of carbon dioxide, carbon monoxide, molecular nitrogen, atomic oxygen, and helium are presented, in addition to an empirical model of the data. The concentrations of the heavy gases, carbon dioxide, carbon monoxide, and molecular nitrogen, rapidly decrease from the evening terminator toward the nightside; the concentration of atomic oxygen remains nearly constant and the helium concentration increases, an indication of a nightside bulge. The kinetic temperature inferred from scale heights drops rapidly from 230 K at the terminator to 130 K at a solar zenith angle of 120 deg, and to 112 K at the antisolar point.
Niemann, H. B.↗