Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Metamaterial composition comprising frequency-selective-surface resonant element disposed on/in a dielectric flake, methods, and applications

Infrared metamaterial arrays containing Au elements immersed in a medium of benzocyclobutene (BCB) were fabricated and selectively etched to produce small square flakes with edge dimensions of approximately 20 .mu.m. Two unit-cell designs were fabricated: one employed crossed-dipole elements while the other utilized square-loop elements.

36 MATERIALS SCIENCE↗

Portable receiver for radar detection

Various embodiments are described relating to a portable antenna-equipped device for multi-band radar detection. The detection device includes a plurality of antennas on a flexible substrate, a detection-and-control circuit, an indicator and a power source. The antenna may include one or more planar lithographic antennas that may be fabricated on a thin-film substrate. Each antenna may be tuned to a different selection frequency or band. The antennas may include a bolometer for radar detection. Each antenna may include a frequency selective surface for tuning to the selection frequency.

36 MATERIALS SCIENCE↗

ANALYSIS OF KINETIC PROCESS OF ENERGETIC ELECTRON DURING A FLARE ON 2004 DECEMBER 1

We analyze the M1.1 flare event peaked at 07:20:00 UT on 2004 December 1 mainly from radio and hard X-ray (HXR) observations. By eliminating the thermal component from the observed total radio emission flux, the non-thermal part of the radio and HXR burst process is investigated in a self-consistent way. The spectral index of energetic electrons deduced from the radio burst evolves as a Soft-Hard-Hard pattern and that from HXR as a Soft-Hard-Soft pattern corresponding to an initial-main-decay phase. The trap-plus-precipitation model is applied in the kinetic process of energetic electrons for this flare event. The radio fluxes at six frequencies selected from the 2.6-7.6 GHz range are fitted with a gyrosynchrotron radiation mechanism. It is found that a linearly increasing electron escape rate can best fit to the observed radio fluxes from 07:00:00 UT to 07:40:00 UT and the slope of the electron escape rate for the six selected frequencies decreases with increasing frequency. During the decay phase from 07:15:00 UT to 07:20:00 UT, the hardened spectrum of the radio burst may be due to the increasing amount of trapped electrons with higher energy by a lower escape rate. Meanwhile, the increasing amount of precipitating electrons with a lower energy band may soften the HXR spectrum. In the decay phase after 07:20:00 UT, thermal emission is the dominating component for the radio burst.

79 ASTRONOMY AND ASTROPHYSICS↗

Wireless zoned particulate matter filter regeneration control system

An assembly includes a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and multiple zones. An absorbing layer absorbs microwave energy in one of N frequency ranges and is arranged with the upstream end. N is an integer. A frequency selective filter has M frequency selective segments and receives microwave energy in the N frequency ranges. M is an integer. One of the M frequency selective segments permits passage of the microwave energy in one of the N frequency ranges and does not permit passage of microwave energy in the other of the N frequency ranges.

42 ENGINEERING↗

Tuning the output of a laser

In a general aspect, a laser system includes a laser and a frequency comb generator system. The laser is configured to generate a laser signal, and the frequency comb generator system is configured to generate a frequency comb based on the laser signal. The frequency comb includes frequency comb signals at respective comb frequencies. The laser system also includes a frequency comb dispersion system configured to spatially separate the frequency comb signals onto respective optical channels of the frequency comb dispersion system. The laser system additionally includes a frequency selector system configured to generate a selected frequency signal from the frequency comb signals after separation. The selected frequency signal includes a target separated frequency comb signal. The laser system also includes a frequency shifter configured to alter the selected frequency signal toward a target output frequency of the laser system.

Liu, Chang↗

Programmable electroacoustic filter apparatus and method for its manufacture

An acoustically coupled frequency selective radio frequency (RF) device is provided. The device includes a piezoelectric substrate overlain by a plurality of electrodes. The device further includes a pair of RF input terminals at least one of which is electrically connected to at least one of the electrodes, and a pair of output RF terminals, at least one of which is electrically connected to at least one other of the electrodes. At least one of the electrodes is electromechanically reconfigurable between a state in which it is closer to a face of the piezoelectric substrate and at least one state in which it is farther from the face of the piezoelectric substrate.

47 OTHER INSTRUMENTATION↗

Wide-Angle Spectrally Selective Absorbers and Thermal Emitters Based on Inverse Opals

Engineered optical absorbers are of significant interest for applications ranging from stray light reduction to energy conversion. Here, we demonstrate a large-area (centimeter-scale) metamaterial that features near-unity frequency-selective absorption in the mid-infrared wavelength range. The metamaterial comprises a self-assembled porous structure known as an inverse opal, here made of silica. The structure’s large volume fraction of voids, together with the vibrational resonances of silica in the mid-infrared spectral range, reduce the metamaterial’s refractive index to close to that of air and introduce considerable optical absorption. As a result, the frequency-selective structure efficiently absorbs incident light of both polarizations even at very oblique incidence angles. The absorber remains stable at high temperatures (measured up to ~900 °C), enabling its operation as a frequency-selective thermal emitter. The excellent performance of this absorber/emitter and ease of fabrication make it a potential surface coating for passive radiative cooling, laser safety, and other large-area applications.

42 ENGINEERING↗

Primary-Side Power Flow Control of Wireless Power Transfer for Electric Vehicle Charging

Various noncontacting methods of plug-in electric vehicle charging are either under development or now deployed as aftermarket options in the light-duty automotive market. Wireless power transfer (WPT) is now the accepted term for wireless charging and is used synonymously for inductive power transfer and magnetic resonance coupling. WPT technology is in its infancy; standardization is lacking, especially on interoperability, center frequency selection, magnetic fringe field suppression, and the methods employed for power flow regulation. This paper proposes a new analysis concept for power flow in WPT in which the primary provides frequency selection and the tuned secondary, with its resemblance to a power transmission network having a reactive power voltage control, is analyzed as a transmission network. Analysis is supported with experimental data taken from Oak Ridge National Laboratory s WPT apparatus. Lastly, this paper also provides an experimental evidence for frequency selection, fringe field assessment, and the need for low-latency communications in the feedback path.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Life history variation is maintained by fitness trade-offs and negative frequency-dependent selection

Significance Many populations and species have different strategies for maximizing reproductive success in changing environments. For example, some species of plants reproduce only once in their lifetime (annuals), whereas others can reproduce over multiple years (perennials). Such variation can also occur in fishes, and we examine how this variation in life history strategies is maintained in a Pacific salmonid species ( Oncorhynchus mykiss ). We find that fish that successfully migrate between the ocean and their freshwater spawning grounds multiple times (repeat spawners) have more than twice the lifetime reproductive success of fish that only spawn once (single spawners). We also find a striking pattern of negative frequency-dependent selection in which older, larger females have higher lifetime fitness when they are less abundant.

Christie, Mark R.↗

Protection of autonomous microgrids using agent-based distributed communication

This study presents a real-time implementation of autonomous microgrid protection using agent-based distributed communication. Protection of an autonomous microgrid requires special considerations compared to large scale distribution net-works due to the presence of power converters and relatively low inertia. In this work, we introduce a practical overcurrent and a frequency selectivity method to overcome conventional limitations. The proposed overcurrent scheme defines a selectivity mechanism considering the remedial action scheme (RAS) of the microgrid after a fault instant based on feeder characteristics and the location of the intelligent electronic devices (IEDs). A synchrophasor-based online frequency selectivity approach is proposed to avoid pulse loading effects in low inertia microgrids. Experimental results are presented for verification of the pro-posed schemes using a laboratory based microgrid. The setup was composed of actual generation units and IEDs using IEC 61850 protocol. The experimental results were in excellent agreement with the proposed protection scheme.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Lithium-Ion Battery Diagnostics Using Electrochemical Impedance via Machine-Learning

Diagnosing battery states such as health, state-of-charge, or temperature is crucial for ensuring the safety and reliability of electrochemical energy storage systems. While some states, such as temperature, may be measured using cheap sensors, accurate diagnosis of battery health metrics usually requires time-consuming performance measurements, making them infeasible for use in real-world operation. These health metrics can be measured during lab-testing and then estimated on-line using predictive life models or via state observer algorithms such as Kalman filters, but these predictive methods should be supplemented by actual measurement of battery health whenever possible to ensure reliability. Rapid measurement of battery health may be done by various types of fast diagnostic techniques such as electrochemical impedance spectroscopy (EIS), which can be performed in only a few minutes and require only a fraction of the energy and power needed for a full charge and discharge measurement. But there is a substantial challenge for estimating battery health using EIS data, as EIS is sensitive to cell temperature, state-of-charge, current, and resting time in addition to health. Thus, utilizing EIS data to predict battery capacity requires correcting for all these additional variables, a task that is extremely difficult to handle analytically. This talk utilizes machine-learning methods to estimate the effectiveness of battery capacity prediction from EIS data, leveraging a data set of hundreds of EIS measurements recorded at varying temperature and state-of-charge throughout a 500-day aging study of 32 commercial, large-format NMC-Graphite lithium-ion batteries. Using EIS as input to machine-learning models is complicated by the nonlinear response of impedance to battery health, temperature, and state-of-charge, as well as the collinearity between the impedance response at neighboring frequencies, which can easily lead to overfit models. To train robust models, features from EIS data need to be extracted from the data or some subset of critical frequencies selected. Many approaches for extracting and selecting features from EIS data from electrochemical analysis and machine-learning fields were identified for analysis: using the entire raw spectra; selection of one, two, or many frequencies from the entire spectra; selecting interesting points from the EIS measurement using domain knowledge; fitting EIS with an equivalent-circuit model; calculating statistics on the raw impedance values; and reducing the dimensionality of the data using unsupervised linear (principal component analysis) and non-linear (uniform manifold approximation and projection) methods. These approaches were rigorously compared using a machine-learning pipeline approach, training linear, Gaussian process, and random forest regression models and quantifying performance using cross-validation as well as a held-out test set. An artificial neural network model trained on the raw spectra was also tested. Promising pipelines were fine-tuned via Bayesian hyperparameter optimization using cross-validation loss and training with class-specific weights to counter data set imbalance. The most reliable method for utilizing impedance in this work was the selection of two optimal frequencies through an exhaustive search, resulting in about 2% mean absolute error on test data for both Gaussian process and random forest model architectures. Interrogation of a variety of models reveals critical frequencies of 100 Hz and 103 Hz for this data set, though the optimal set of frequencies is not necessarily intuitive, i.e., the best performing models are not simply those that use impedance at frequencies that have the highest correlation to the relative discharge capacity. The best performing model is an ensemble model, which is able to predict battery capacity with 1.9% mean absolute error for unseen cells using impedance recorded at a variety of temperatures and states-of-charge.

battery↗

Three-dimensional broadband nonlinear phased array imaging

System include an ultrasonic transducer configured to couple to a nondestructive testing (NDT) sample and configured to produce and direct an ultrasonic probe wave at a selected frequency into a subsurface region of the NDT sample, a 3D laser scanning vibrometer configured to direct a detection beam in a scan area on a surface of the NDT sample and to receive a return beam from the scan area, and to detect, based on the return beam, a 3D motion of the surface across a wideband frequency range, and a processor, and a memory configured with instructions that, when executed by the processor, cause the processor to produce sub-surface image data of the NDT sample at multiple harmonics of the selected frequency in the wideband frequency range based on the detected 3D surface motion, wherein the sub-surface image data describes a nonlinear defect response produced in the NDT sample by interaction of the ultrasonic probe wave with the subsurface region.

Remillieux, Marcel↗

A 12 GHZ 50 MW Klystron for Support of Accelerator Research

A 12 GHz 50MW X-band klystron is under development at the SLAC National Accelerator Laboratory Klystron Department. The klystron will be fabricated to support programs currently underway at three European Labs; CERN, PSI, and INFN Trieste. The choice of frequency selection was due to the CLIC RF frequency changing from 30 GHz to the European X-band frequency of 11.99 GHz in 2008. Since the Klystron Department currently builds 50MW klystrons at 11.424 GHz known collectively as the XL4 klystrons, it was deemed cost-effective to utilize many XL4 components by leaving the gun, electron beam transport, solenoid magnet and collector unchanged. To realize the rf parameters required, the rf cavities and rf output hardware were necessarily altered. Some improvements to the rf design have been made to reduce operating gradients and increase reliability. Changes in the multi-cell output structure, waveguide components, and the window will be discussed along with testing of the devices. Five klystrons known as XL5 klystrons are scheduled for production over the next two years.

43 PARTICLE ACCELERATORS↗

Approximate Green’s Function Coupled Cluster A Method Employing Effective Dimension Reduction

The Green’s function coupled cluster (GFCC) method, originally proposed in the early 1990s, is a powerful many-body tool for computing and analyzing the electronic structures of molecular structures and periodic systems, especially when electrons are strongly correlated. However, in order for the GFCC method to become an approach that can be routinely used in the electronic structure calculations, more robust linear algebraic techniques and approximations need to be employed to reduce its extremely high computational overhead. In our recent studies, we showed that the GFCC equation can be numerically solved by seeking solutions of multiple linear systems in the frequency regime of interest, which can be easily distributed in a massively parallel environment, and broaden the avenue for more state-of-the-art numerical linear algebraic tools associated with multiple linear systems to be kicked in to this field. In the present pursuit of this practice, we show a successful application of model order reduction (MOR) techniques in the GFCC framework. Briefly speaking, for a frequency regime of interest that requires a high resolution of spectral function, instead of solving GFCC linear equation in the original dimension for every single frequency point, an easily-solvable linear system model with reduced dimension can be built upon projecting the original GFCC linear system into a subspace, from which the interpolation and extrapolation can give a reasonable approximation to the results of the original GFCC linear equations. Here, we show that the subspace can be properly constructed in an iterative manner from the auxiliary vectors of the GFCC linear equations at some select frequencies inside the frequency regime. During the iterations, the quality of the subspace, as well as the linear system model, can be systematically improved. The approach is tested in this work in terms of the efficiency and accuracy of computing spectral functions for some typical molecular systems including carbon monoxide, 1,3-butadiene, benzene, and adenine molecules. As a byproduct, the high quality linear system model is also found to be able to provide high quality initial guess for the existing linear solver to improve the convergence performance.

Peng, Bo↗

Self-generation of dissipative solitons in magnonic quasicrystal active ring resonator

Self-generation of dissipative solitons in the magnonic quasicrystal (MQC) active ring resonator is studied theoretically and experimentally. The developed magnonic crystal has quasiperiodic Fibonacci type structure. Frequency selectivity of the MQC together with the parametric three-wave decay of magnetostatic surface spin wave (MSSW) leads to the dissipative soliton self-generation. The transfer matrix method is used to describe MQC transmission responses. Besides, the model of MQC active ring resonator is suggested. The model includes three coupled differential equations describing the parametric decay of MSSW and two differential equations of linear oscillators describing the frequency selectivity of MQC. Numerical simulation results of dissipative soliton self-generation are in a fair agreement with experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cryogenic testing of the 2.1 GHz five-cell superconducting RF cavity with a photonic band gap coupler cell

We present results from cryogenic tests of the multi-cell superconducting radio frequency (SRF) cavity with a photonic band gap (PBG) coupler cell. Achieving high average beam currents is particularly desirable for future light sources and particle colliders based on SRF energy-recovery-linacs (ERLs). Beam current in ERLs is limited by the beam break-up instability, caused by parasitic higher order modes (HOMs) interacting with the beam in accelerating cavities. A PBG cell incorporated in an accelerating cavity can reduce the negative effect of HOMs by providing a frequency selective damping mechanism, thus allowing significantly higher beam currents. The multi-cell cavity was designed and fabricated of niobium. Two cryogenic (vertical) tests were conducted. The high unloaded Q-factor was demonstrated at a temperature of 4.2 K at accelerating gradients up to 3 MV/m. The measured value of the unloaded Q-factor was 1.55 × 10 8 , in agreement with prediction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectral selective radio frequency emissions from laser induced breakdown of target materials

The radio frequency emissions scanned over broad spectral range (30 MHz–1 GHz) from single shot nanosecond (7 ns) and picosecond (30 ps) laser induced breakdown (LIB) of different target materials (atmospheric air, aluminum, and copper) are presented. The dominant emissions from ns-LIB, compared to those from the ps-LIB, indicate the presence and importance of atomic and molecular clusters in the plasma. The dynamics of laser pulse-matter interaction and the properties of the target materials were found to play an important role in determining the plasma parameters which subsequently determine the emissions. Thus, with a particular laser and target material, the emissions were observed to be spectral selective. The radiation detection capability was observed to be relatively higher, when the polarization of the input laser and the antenna is same.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗