Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “form factors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Longitudinal form Factors of A ≤ 10 Nuclei in a Chiral Effective Field Theory Approach

Here, in this work, we present the elastic electron scattering longitudinal form factors of A ≤ 10 nuclei computed in a variational Monte Carlo approach. We employ the Norfolk family of local chiral interactions and a consistent electromagnetic charge operator. Our calculations are compared both to data and past theoretical evaluations. This work represents, to our knowledge, the first accurate calculation of longitudinal form factors using manybody methods based on interacting nucleon degrees of freedom in the 7 ≤ A ≤ 10 mass range. Finally, we identify 9 Be and 10 B as candidate targets for renewed experimental interest, as they exhibit the potential to provide more stringent constraints on the theoretical models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Gravitational form factors of glueballs in Yang-Mills theory

This work presents preliminary results of the first determination of the energy-momentum tensor form factors of the scalar glueball, referred to as gravitational form factors (GFFs). The calculation has been carried out in lattice Yang-Mills theory at a single lattice spacing. Using variationally optimized operators, the matrix elements are extracted from ratios of three-point functions to two-point functions. The glueball GFFs and their kinematic dependence are compared to those of other hadrons from previous calculations.

Abbott, Ryan [Massachusetts Institute of Technolog↗
DOE OSTI2024

Gravitational form factors of glueballs in Yang-Mills theory

This work presents preliminary results of the first determination of the energy-momentum tensor form factors of the scalar glueball, referred to as gravitational form factors (GFFs). The calculation has been carried out in lattice Yang-Mills theory at a single lattice spacing. Using variationally optimized operators, the matrix elements are extracted from ratios of three-point functions to two-point functions. The glueball GFFs and their kinematic dependence are compared to those of other hadrons from previous calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Electromagnetic and two-photon transition form factors of the pseudoscalar mesons: An algebraic model computation

We compute electromagnetic and two-photon transition form factors of ground-state pseudoscalar mesons: π , K , η c , η b . To this end, we employ an algebraic model based upon the coupled formalism of Schwinger-Dyson and Bethe-Salpeter equations. Within this approach, the dressed quark propagator and the relevant Bethe-Salpeter amplitude encode the internal structure of the corresponding meson. Electromagnetic properties of the meson are probed via the quark-photon interaction. The algebraic model employed by us unifies the treatment of all ground-state pseudoscalar mesons. Its parameters are carefully fitted performing a global analysis of existing experimental data including the knowledge of the charge radii of the mesons studied. We then compute and predict electromagnetic and two-photon transition form factors for a wide range of probing photon momentum-squared which is of direct relevance to the experimental observations carried out thus far or planned at different hadron physics facilities such as the Thomas Jefferson National Accelerator Facility (JLab) and the forthcoming Electron-Ion Collider. We also present comparisons with other theoretical models and approaches and lattice quantum chromodynamics. Published by the American Physical Society 2024

Higuera-Angulo, I. M. (ORCID:0000000256008875)↗
NASA NTRS2010

Evaluation of Small Form Factor Fiber Optic Interconnects for the NASA Electronics Parts and Packaging Program (NEPP)

The Diamond AVIM optical fiber connector has been used for over a decade in flight environments. AVIM which stands for Aviation Intermediate Maintenance is always referenced as a fiber optic connector type from the DIN (Deutsches Institut fur Normung) family of optical fiber connectors. The newly available Mini AVIM and DMI (Definition Multimedia Interface) connectors also by Diamond provide similar features as the high performance AVIM with the added benefits of being small form factor for board mount and internal box use where long connectors and strain relief can not be accommodated. Transceiver, fiber laser technology and receiver optic technology based on small sized constraints will benefit the most by the reduction in connector form factor. It is for this reason that the Mini AVIM is being evaluated for multimode and single mode optical fiber use in both fiber based and cable based packaging configurations. In a fiber based termination, there are no cable materials to bond to the connector. The only bonding that is conducted is the mounting of the fiber with epoxy to the connector ferrules (which are called DMI ferrules). In a cable configuration, the compatibility of the connector subcomponents along with the upjacketing materials of the cable around the fiber needs to be considered carefully for termination fabrication. Cabled terminations will show greater insertion loss and high probability of failures during thermal cycling testing. This is due to the stressing of the combination of materials that each have different Coefficients of Thermal Expansion (CTE's) and that are bonded together to the connector subcomponents. As the materials flex during thermal excursions, forces are applied to the termination and can make the system fail if the grouping of materials (per their CTE's) are not compatible and this includes cable materials, epoxies, ferrule and connector body components. For this evaluation, multimode 100 micron core step index fiber was used for the fiber terminated condition, and single mode SMF-28 upjacketed with W.L. Gore Flexlite was used for the cabled configuration. For background purposes, a comparison is presented here for information purposes between the high performance AVIM connector features and the Mini AVIM small form factor connectors. Basic connector features are described here.

Ott, Melanie↗
DOE OSTI2024

Gravitational form factors and mechanical properties of quarks in protons: A basis light-front quantization approach

We compute the gravitational form factors (GFFs) and study their applications for the description of the mechanical properties such as the pressure, shear force distributions, and the mechanical radius of the proton from its light-front wave functions (LFWFs) based on basis light-front quantization (BLFQ). The LFWFs of the proton are given by the lowest eigenvector of a light-front effective Hamiltonian that incorporates a three-dimensional confining potential and a one-gluon exchange interaction with fixed coupling between the constituent quarks solved in the valence Fock sector. We find acceptable agreement between our BLFQ computations and the lattice QCD for the GFFs. Our D -term form factor also agrees well with the extracted data from the deeply virtual Compton scattering experiments at Jefferson Lab, and the results of different phenomenological models. The distributions of pressures and shear forces are similar to those from different models. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2026

ϕ → 3 π and ϕ π 0 transition form factor from Khuri-Treiman equations

This work studies the ϕ → 3 π decay and the ϕ → π 0 γ * transition form factor, utilizing the Khuri-Treiman formalism to account for analyticity, crossing, and unitarity. Using once-subtracted dispersion relations, we perform a simultaneous fit to the ϕ → 3 π Dalitz plot distribution and the ϕ → π 0 γ * measurements from the KLOE collaboration, finding good agreement with these experimental data. These results reaffirm the applicability of the Khuri-Treiman approach in the analysis of three-body decays. An interesting result is that the subtraction constant appearing in the equations is similar to a sum rule expectation, in contrast to analogous studies of ω → 3 π decays and ω → π 0 γ * , which shows significant deviations. Our results also provide a reasonable description of the trend of the transition form factor data from in the e + e − → ϕ π 0 scattering region. These intriguing theoretical differences between the decays of ϕ and ω could encourage further experimental measurements to assess the discrepancies and refine the theoretical predictions.

Lorenzo, A. G. [Instituto de Física Corpuscular; U↗
DOE OSTI2025

High precision measurements of the proton elastic electromagnetic form factors and their ratio at 𝑄 2 = 0.50, 2.64, 3.20, and 4.10 GeV 2

The advent of high-intensity, high-polarization electron beams led to significantly improved measurements of the ratio of the proton’s charge to electric form factors, 𝐺 𝐸⁢ 𝑝 ⁡/𝐺 𝑀⁢ 𝑝 . However, high-𝑄 2 measurements of this ratio yielded significant disagreement with extractions based on unpolarized scattering measurements, raising questions about the reliability of the measurements and consistency of the techniques. Jefferson Lab experiment E01-001 was designed to provide a high precision extraction of 𝐺 𝐸⁢ 𝑝 ⁡/𝐺 𝑀⁢ 𝑝 from unpolarized cross-section measurements using a modified version of the Rosenbluth separation technique to allow for a more precise comparison with polarization data. Rosenbluth separations involve precise measurements of the angular dependence of the elastic 𝑒−𝑝 cross section at fixed momentum transfer, 𝑄 2 . Conventional Rosenbluth separations detect the scattered electron, requiring the comparisons of measurements with very different detected electron energy and rate for electrons at different angles. Our ‘‘super-Rosenbluth’’ measurement detected the struck proton, rather than the scattered electron to extract the elastic 𝑒−𝑝 cross section. This yielded a fixed momentum for the detected particle and dramatically reduced variation of the cross section with angle, significantly reducing rate- and momentum-dependent corrections and uncertainties. We measure the cross section vs angle with high relative precision, allowing for extremely high precision extractions of 𝐺 𝐸⁢ 𝑝 ⁡/𝐺 𝑀⁢ 𝑝 at 𝑄 2 = 2.64, 3.20, and 4.10 GeV 2 . Our results are consistent with traditional Rosenbluth extractions, but with much smaller corrections and systematic uncertainties, comparable to the uncertainties from polarization measurements. Our data confirm the discrepancy between Rosenbluth and polarization extractions of the proton form factor ratio using an improved Rosenbluth extraction that yields smaller and less-correlated uncertainties than those typical of previous Rosenbluth extractions. Here, we compare our results to calculations of two-photon exchange effects and find that the observed discrepancy can be relatively well explained by such effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1994

Normalization Of Thermal-Radiation Form-Factor Matrix

Report describes algorithm that adjusts form-factor matrix in TRASYS computer program, which calculates intraspacecraft radiative interchange among various surfaces and environmental heat loading from sources such as sun.

Tsuyuki, Glenn T.↗
DOE OSTI2025

Mechanical form factors and densities of nonrelativistic fermions

The hadron physics community has been actively debating the interpretation of so-called mechanical properties of hadrons. Nonrelativistic quantum-mechanical systems like the hydrogen atom have been appealed to in these debates as analogies. Since such appeals are likely to continue, it is important to have Galilei-covariant expressions for matrix elements of the energy-momentum tensor. In this work, I obtain Galilei-covariant breakdowns of such matrix elements into mechanical form factors, with a special focus on spin-half states. I additionally study the spatial densities associated with these form factors, using the pilot wave interpretation to guide their breakdown into contributions from internal structure and from quantum-mechanical effects such as wave packet dispersion. For completeness, I also obtain nonrelativistic Breit frame densities.

form factors↗
DOE OSTI2025

Measurement of the Neutron Electromagnetic Form Factors at High Momentum Transfer Using a Polarized 3He Target at Jefferson Lab

Ever since the composite structure of nucleons was uncovered, many experiments have been commissioned with the purpose of extracting parameters that shape our understanding of this structure. Form factors are powerful tools that rest at the forefront of the nucleon structure study. In the non-relativistic limit, they describe the magnetic and charge distributions inside the nucleon. The GEn-II experiment, which ran in Hall A of Jefferson Lab as a part of the SuperBigbite Spectrometer (SBS) program, aimed to extract the ratio of the neutron’s electric to magnetic Sachs form factors (GnE/GnM. This was accomplished using the double polarization technique: scattering polarized electrons with initial energies up to 8.45 GeV off high-density polarized 3He targets. The experiment was a coincidence measurement, with the scattered electrons detected in the BigBite Spectrometer and the recoil nucleons in a hadron calorimeter, a part of the SuperBigbite Spectrometer. The convection-style target cells used in this experiment have a 60cm long target chamber, an increase from the 40 cm cell used in the most recent polarized 3He target experiment. In addition, the cells were optically pumped from two sides of the pumping chamber. These improvements in design and functionality introduced world-record-breaking luminosity. This thesis presents preliminary results of the GEn-II experiment for the following 4-momentum transfer (Q2) values: 2.93, 6.76, and 9.78 GeV2, in addition to target performance and preliminary polarimetry results.

Presley, Hunter [Univ. of Virginia, Charlottesvill↗
NASA NTRS2013

Stackable Form-Factor Peripheral Component Interconnect Device and Assembly

A stackable form-factor Peripheral Component Interconnect (PCI) device can be configured as a host controller or a master/target for use on a PCI assembly. PCI device may comprise a multiple-input switch coupled to a PCI bus, a multiplexor coupled to the switch, and a reconfigurable device coupled to one of the switch and multiplexor. The PCI device is configured to support functionality from power-up, and either control function or add-in card function.

Somervill, Kevin M.↗
DOE OSTI2025

Rosenbluth-like separation of the $J/ψ$ near-threshold photoproduction: An access to the gluon gravitational form factors at high t

Here, we perform analysis of the near-threshold $J/\psi $ photoproduction data off the proton based on two theoretical approaches, GPD \cite{Guo3} and holographic \cite{Zahed2}, that represent the differential cross sections as powers of the skewness parameter with coefficients that depend only on the momentum transfer $t$. This allows to separate kinematically the corresponding coefficient functions, in much the same way as this is done for the electric and magnetic form factors using the Rosenbluth separation. We examine the independence of the extracted functions with the photon beam energy. These functions, under additional assumptions, are related to the proton's gluon Gravitational Form Factors (gGFFs). We compare the extracted functions with lattice calculations of the gGFFs in the region of $0.5<|t|<2$~GeV$^{2}$, where they overlap. Such analysis demonstrates the possibility of extracting some combinations of the gGFFs from the data at high $t$, complementary to the lattice calculations available in the low $t$ region. However, higher statistics are needed to more accurately check the predicted scaling behavior of the data and compare with the lattice results, thus testing and comparing the theoretical assumptions used in the GPD and holographic models.

Pentchev, Lubomir [Thomas Jefferson National Accel↗
DOE OSTI2026

Nucleon axial-vector form factor and radius from radiatively corrected antineutrino scattering data

The nucleon axial-vector form factor, 𝐺 𝐴 , is critical to determine the electroweak interactions of leptons with nucleons. Important examples of processes influenced by 𝐺 𝐴 are elastic (anti)neutrino-nucleon scattering and muon capture by the proton. Sparse experimental data results in a large uncertainty on the momentum dependence of 𝐺 𝐴 and has motivated the consideration of new experimental probes and first-principles lattice quantum chromodynamics (QCD) evaluations. The comparison of new and precise theoretical predictions for 𝐺 𝐴 with future experimental data necessitates the application of radiative corrections to experimentally observable processes. We apply these corrections in the extraction of 𝐺 𝐴 and the associated axial-vector radius from the recent MINERvA antineutrino-hydrogen data, compare the effects from radiative corrections to other uncertainties in neutrino scattering experiments, and discuss the comparison of lattice QCD evaluations to experimental measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Parameterizations of electron scattering form factors for elastic scattering and electroexcitation of nuclear states in 27 Al and 40 Ca

Here, we report on empirical parameterizations of longitudinal ($\mathscr{R}$ L ) and transverse ($\mathscr{R}$ T ) nuclear elec- tromagnetic form factors for elastic scattering and the excitations of nuclear states in 27 Al and 40 Ca. The parameterizations are needed for the calculations of radiative corrections in measurements of electron scattering cross sections on 27 Al and 40 Ca in the quasi-elastic, resonance and inelastic con- tinuum regions, provide the contribution of nuclear excitations in investigations of the Coulomb Sum Rule, and test theoretical model predictions for excitation of nuclear states in electron and neutrino interactions on nuclear targets at low energies.

elastic scattering reactions↗