Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fluctuations response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Excitation of linearly stable waves in a multispecies plasma

Excitation of electrostatic modes as a result of the injection of an argon beam into a multispecies plasma is investigated. It is shown that the injection of a warm artificial beam into a thermal plasma may excite waves of significant amplitude with a range of phase velocities which are linearly stable. These waves appear as a result of the correlation between motions of an individual particle in a Vlasov fluid. When the free energy is derived from a warm beam and the linear instability diminishes due to the large temperature of the beam, the competing mechanism of thermal fluctuations is responsible for the main excitation of waves. This mechanism is valid for the various modes in a multispecies plasma, with a higher enhancement at the lower-hybrid than at the ion-ion-hybrid modes.

Roth, Ilan↗
NASA NTRS1989

Atmospheric methane measurement instrument using a Zeeman-split He-Ne laser

The construction of an atmospheric methane measurement instrument based on a Zeeman-split IR He-Ne laser is reported. The laser has a tranverse magnetic field over about 2/3 of its gain length and can oscillate at an (unsplit) frequency (2947.91/cm) centered on a methane absorption line, or on either of two frequencies split by + or - 0.055/cm from the center, with low CH4 absorption. The laser is tuned to dwell sequentially at each frequency, giving two differential absorption measurements in each 46-ms tuning cycle. Atmospheric measurements are made using two multiple pass absorption cells, one with fast (0.75-s) and one with slow (5-s) flow response times. Fluctuations in ambient CH4 of about 20-ppb (rms, 1-s averaging) are detected, with interference fringe effects the dominant noise source. The instrument has operated in a field experiment (NASA GTE/ABLE-3A) in Alaska.

Mcmanus, J. Barry↗
NASA NTRS1996

Modulation of bone remodeling via mechanically activated ion channels

A critical factor in the maintenance of bone mass is the physical forces imposed upon the skeleton. Removal of these forces, such as in a weightless environment, results in a rapid loss of bone, whereas application of exogenous mechanical strain has been shown to increase bone formation. Numerous flight and ground-based experiments indicate that the osteoblast is the key bone cell influenced by mechanical stimulation. Aside from early transient fluctuations in response to unloading, osteoclast number and activity seem unaffected by removal of strain. However, bone formation is drastically reduced in weightlessness and osteoblasts respond to mechanical strain with an increase in the activity of a number of second messenger pathways resulting in increased anabolic activity. Unfortunately, the mechanism by which the osteoblast converts physical stimuli into a biochemical message, a process we have termed biochemical coupling, remains elusive. Prior to the application of this grant, we had characterized a mechanosensitive, cation nonselective channel (SA-cat) in osteoblast-like osteosarcoma cells that we proposed is the initial signalling mechanism for mechanotransduction. During the execution of this grant, we have made considerable progress to further characterize this channel as well as to determine its role in the osteoblastic response to mechanical strain. To achieve these goals, we combined electrophysiologic techniques with cellular and molecular biology methods to examine the role of these channels in the normal function of the osteoblast in vitro.

Duncan, Randall L.↗
NASA NTRS2011

Measuring Fluctuating Pressure Levels and Vibration Response in a Jet Plume

The characterization of loads due to solid rocket motor plume impingement allows for moreaccurate analyses of components subjected to such an environment. Typically, test verification of predicted loads due to these conditions is widely overlooked or unsuccessful. ATA Engineering, Inc., performed testing during a solid rocket motor firing to obtain acceleration and pressure responses in the hydrodynamic field surrounding the jet plume. The test environment necessitated a robust design to facilitate measurements being made in close proximity to the jet plume. This paper presents the process of designing a test fixture and an instrumentation package that could withstand the solid rocket plume environment and protect the required instrumentation.

Osterholt, Douglas J.↗
NASA NTRS2020

Overview and Initial Results of SAND-E: Semi-Autonomous Navigation for Detrital Environments

Unmanned aerial systems (UAS) and automated terrain analysis for science and navigation are new technologies for planetary exploration. The Mars Helicopter will fly with the Mars2020 rover, the Dragonfly quadcopter will explore Titan, and Soil Properties and Object Classification (SPOC) software will be used for path planning and navigation on the Mars2020 rover. Using an Argo J5 rover instrumented with stereo cameras and Autonomous Soil Assessment System (ASAS) software, and an off the shelf quadcopter, SAND-E tested the use of automated terrain analysis and UAS data for science operations in a Mars-analog environment in Iceland during July of 2019. Scientifically, we sought to determine changes in the physical and chemical properties of sediments along a glacial-fluvial-aeolian transport pathway. Operationally, we tested rover mission-like scenarios that included UAS images and classified terrain images. Here, we present the initial results for both the operations and science elements of the study. Site Selection: A goal of SAND-E is examine sorting and alteration of sediments in fluvial and aeolian environments in both mineral-dominated and glass-dominated basaltic settings. During the first year of the project we focused on a mineral-dominated environment. Selection of the location was based on prior publications that indicated our selected region had a greater abundance of crystalline sediments than other areas fluvial-aeolian settings in Iceland. Other criteria included the presence of both fluvial and aeolian landforms along a transport pathway such that the sediments in transport could be linked to their source rocks. We chose the Skjaldbreidauhraun glacial outwash plain, which sits at the base of Thórisjökull glacier. The site is 30 km north of Thingvellir National Park and ~2 hours from Reykjavik. The outwash plain is fed by two small catchments that drain from the base of the glacier and cut through hyaloclastite and shield volcano bedrock. The drainage progresses from steep alluvial fans near the glacier into a low-sloping fluvial braidplain that becomes confined by the Skjaldbreidur shield volcano and creates a shallow canyon cut into lava bedrock. The fluvial system was a typical braided alluvial environment composed pebble- and cobble-bedded longitudinal bars and sandy channel beds. The river remained active and fluctuated in response to diurnal runoff cycles near the glacier before disappearing into the sandy substrate downstream. The high concentration of suspended sediment in the river was evident by the cloudy water and the silt and clay-sized sediments that draped the channel beds after abandonment and created playas in the lowest sloping areas of the catchment. The entire fluvial system was affected by the winds generated by frontal systems and katabatic flows descending the glacier. This resulted in the formation of aeolian lag deposits and a wind-deflation plain where the fluvial system was not active. Wind ripples and drifts formed in abandoned fluvial channels from aeolian reworking of the sand-sized fluvial sediments. The silt- and clay-sized sediments found in fluvial channels, bar tops, and playas generated dust plumes during high wind events. Our operation sought to capture the variability in this system by sampling from the range of fluvial and aeolian features 6.3 km (proximal), 11.3 km (medial), and 14.4 km (distal) along the river from its origin at the base of glacier.

Ewing, R. C.↗
NASA NTRS2006

Solar Wind Excitation of Pc5 Fluctuations in the Magnetosphere and on the Ground

The primary purpose of this paper is to show the strong link between solar wind compressional fluctuations in the 1-8 mHz frequency range and Pc5 fluctuations in the magnetosphere near the magnetopause, at geosynchronous orbit, over the poles, and on the ground. We focus on a time interval in March and April 2002 when there was a favorable alignment of satellites combined with ten high speed solar wind streams. We used the S3C Great Observatory: specifically, ACE and Wind in the solar wind, Geotail near the magnetopause, GOES 8 and 10 at geosynchronous orbit, Cluster over the poles, and CANOPUS/CARISMA ground stations near the footpoints of magnetic field lines connected to either the magnetopause or the GOES satellites. Using four examples and a statistical survey we show that magnetospheric Pc5 fluctuations exist regardless of IMF orientation and for a wide range of speeds and dynamic pressures; the amplitude and power of magnetospheric fluctuations depends primarily on the amplitude and power of solar wind dynamic pressure fluctuations. The driving and response frequency of these geoeffective fluctuations is in the range 0.5 - 4 mHz. The most striking magnetospheric response occurs when the solar wind speed, dynamic pressure, and dynamic pressure fluctuations all increase at approximately the same time, as frequently occurs near the leading edge of high speed streams. We show evidence of oscillating Poynting Flux at the magnetopause determined using Geotail data that both excites a FLR and propagates evanescently inward. These observations suggest that, at least for this time interval at spring equinox, the entry path is from the dayside equatorial magnetopause inward; multiple field line resonances may be excited from the magnetopause to geosynchronous orbit by propagating compressional waves, with the power decreasing inward away from the magnetopause.

Kessel, Ramona L.↗
NASA NTRS2007

Acoustic and Vibration Environment for Crew Launch Vehicle Mobile Launcher

A launch-induced acoustic environment represents a dynamic load on the exposed facilities and ground support equipment (GSE) in the form of random pressures fluctuating around the ambient atmospheric pressure. In response to these fluctuating pressures, structural vibrations are generated and transmitted throughout the structure and to the equipment items supported by the structure. Certain equipment items are also excited by the direct acoustic input as well as by the vibration transmitted through the supporting structure. This paper presents the predicted acoustic and vibration environments induced by the launch of the Crew Launch Vehicle (CLV) from Launch Complex (LC) 39. The predicted acoustic environment depicted in this paper was calculated by scaling the statistically processed measured data available from Saturn V launches to the anticipated environment of the CLV launch. The scaling was accomplished by using the 5-segment Solid Rocket Booster (SRB) engine parameters. Derivation of vibration environment for various Mobile Launcher (ML) structures throughout the base and tower was accomplished by scaling the Saturn V vibration environment.

Vu, Bruce T.↗
NASA NTRS1978

A method for predicting full scale buffet response with rigid wind tunnel model fluctuating pressure data. Volume 2: Power spectral densities for method assessment

The predicted upper and lower bounds power spectra for all of the cases and response items given in Volume 1 are plotted. The flight test power spectra are shown on each prediction plot for the nominal value of angle of attack that most closely agrees with the flexible angle for the prediction. The flight test and prediction conditions are given in tabular form for all cases considered.

Cunningham, A. M., Jr.↗
NASA NTRS1978

A method for predicting full scale buffet response with rigid wind tunnel model fluctuating pressure data. Volume 1: Prediction method development and assessment

The method requires unsteady aerodynamic forces, natural airplane modes, and the measured pressure data as input. A gust response computer program is used to calculate buffet response due to the forcing function posed by the measured pressure data. By calculating both symmetric and antisymmetric solutions, upper and lower bounds on full-scale buffet response are formed. Comparisons of predictions with flight test results are made and the effects of horizontal tail loads and static aeroelasticity are shown. Discussions are also presented on the effects of primary wing torsion modes, chordwise and spanwise phase angles, and altitude.

Cunningham, A. M., Jr.↗
NASA NTRS1994

New techniques for diffusing-wave spectroscopy

We present two new types of measurements that can be made with diffusing-wave spectroscopy (DWS), a form of dynamic light scattering that applies in limit of strong multiple scattering. The first application is to measure the frequency-dependent linear viscoelastic moduli of complex fluids using light scattering. This is accomplished by measuring the mean square displacement of probe particles using DWS. Their response to thermal fluctuations is determined by the fluctuation-dissipation relation, and is controlled by the response of the surrounding complex fluid. This response can be described in terms of a memory function, which is directly related to the complex elastic modulus of the system. Thus by measuring the mean square displacement, we are able to determine the frequency dependent modulus. The second application is the measurement of shape fluctuations of scattering particles. This is achieved by generalizing the theory for DWS to incorporate the effects if amplitude fluctuations in the scattering intensity of the particles. We apply this new method to study the thermally induced fluctuations in the shape of spherical emulsion droplets whose geometry is controlled by surface tension.

Mason, T. G.↗
NASA NTRS2018

Spatial Variations in Crop Growing Seasons Pivotal to Reproduce Global Fluctuations in Maize and Wheat Yields

Testing our understanding of crop yield responses to weather fluctuations at global scale is notoriously hampered by limited information about underlying management conditions, such as cultivar selection or fertilizer application. Here, we demonstrate that accounting for observed spatial variations in growing seasons increases the variance in reported national maize and wheat yield anomalies that can be explained by process-based model simulations from 34 to 58% and 47 to 54% across the 10 most weather-sensitive main producers, respectively. For maize, the increase in explanatory power is similar to the increase achieved by accounting for water stress, as compared to simulations assuming perfect water supply in both rainfed and irrigated agriculture. Representing water availability constraints in irrigation is of second-order importance. We improve the model’s explanatory power by better representing crops’ exposure to observed weather conditions, without modifying the weather response itself. This growing season adjustment now allows for a close reproduction of heat wave and drought impacts on crop yields.

Maize↗
NASA NTRS1994

Termination shock response to large-scale solar wind fluctuations

The analysis of data recorded by the Voyager 2 spacecraft indicates the presence of large-scale fluctuations in the solar wind ram pressure on the time scale of tens of days. The amplitude of the fluctuations is highly variable but often lies within a factor of 5 to 10 change from an average or mean value of the ram pressure. Since the spacecraft has presumably not encountered the termination shock yet, these fluctuations should eventually interact with the shock and thereby play a role in determining the shock location. Numerical solutions of the time-dependent gasdynamic equations are used to simulate the response of the termination shock to fluctuations in the solar wind ram pressure comparable to those observed. The primary result of this study is that the maximum shock excursion due to the fluctuations is of the order of 1 AU, which is much smaller than that predicted by other studies. Additional simulations show that the limited movement is due to the fact that the time scale for the termination shock response is substantially larger than the time scale of the fluctuations. It is also shown that the heliopause acts as a barrier for the fluctuations and confines them to the heliosphere.

Steinolfson, R. S.↗
NASA NTRS1994

Termination shock response to large-scale solar wind fluctuations

The analysis of data recorded by the Voyager 2 spacecraft indicates the presence of large-scale fluctuations in the solar wind ram pressure on the time scale of tens of days. The amplitude of the fluctuations is highly variable but often lies within a factor of 5 to 10 change from an average or mean value of the ram pressure. Since the spacecraft has presumably not encountered the termination shock yet, these fluctuations should eventually interact with the shock and thereby play a role in determining the shock location. Numerical solutions of the time-dependent gas dynamic equations are used to simulate the response of the termination shock to fluctuations in the solar wind ram pressure comparable to those observed. The primary result of this study is that the maximum shock excursion due to the fluctuations is of the order of 1 AU, which is much smaller than that predicted by other studies. Additional simulations show that the limited movement is due to the fact that the time scale for the termination shock response is substantially larger than the time scale of the fluctuations. It is also shown that the heliopause acts as a barrier for the fluctuations and confines them to the heliosphere.

Steinolfson, R. S.↗
NASA NTRS1977

Microphysical response of cloud droplets in a fluctuating updraft

The effect of a fluctuating updraft upon a distribution of cloud droplets is examined. Computations are performed for fourteen vertical velocity patterns; each allows a closed parcel of cloud air to undergo downward as well as upward motion. Droplet solution and curvature effects are included. The classical equations for the growth rate of an individual droplet by vapor condensation relies on simplifying assumptions. Those assumptions are isolated and examined. A unique approach is presented in which all energy sources and sinks of a droplet may be considered and is termed the explicit model. It is speculated that the explicit model may enhance the growth of large droplets at greater heights. Such a model is beneficial to the studies of pollution scavenging and acid rain.

Harding, D. D.↗
NASA NTRS2007

Nanorod-Based Fast-Response Pressure-Sensitive Paints

A proposed program of research and development would be devoted to exploitation of nanomaterials in pressuresensitive paints (PSPs), which are used on wind-tunnel models for mapping surface pressures associated with flow fields. Heretofore, some success has been achieved in measuring steady-state pressures by use of PSPs, but success in measuring temporally varying pressures has been elusive because of the inherent slowness of the optical responses of these materials. A PSP contains a dye that luminesces in a suitable wavelength range in response to photoexcitation in a shorter wavelength range. The luminescence is quenched by oxygen at a rate proportional to the partial pressure of oxygen and thus proportional to the pressure of air. As a result, the intensity of luminescence varies inversely with the pressure of air. The major problem in developing a PSP that could be easily applied to a wind-tunnel model and could be useful for measuring rapidly varying pressure is to provide very high gas diffusivity for rapid, easy transport of oxygen to and from active dye molecules. Most PSPs include polymer-base binders, which limit the penetration of oxygen to dye molecules, thereby reducing responses to pressure fluctuations. The proposed incorporation of nanomaterials (somewhat more specifically, nanorods) would result in paints having nanostructured surfaces that, relative to conventional PSP surfaces, would afford easier and more nearly complete access of oxygen molecules to dye molecules. One measure of greater access is effective surface area: For a typical PSP as proposed applied to a given solid surface, the nanometer-scale structural features would result in an exposed surface area more than 100 times that of a conventional PSP, and the mass of proposed PSP needed to cover the surface would be less than tenth of the mass of the conventional PSP. One aspect of the proposed development would be to synthesize nanorods of Si/SiO2, in both tangle-mat and regular- array forms, by use of chemical vapor deposition (CVD) and wet chemical processes, respectively. The rods would be coated with a PSP dye, and the resulting PSP signals would be compared with those obtained from PSP dye coats on conventional support materials. Another aspect of the proposed development would be to seek to exploit the quantum properties of nanorods of a suitable semiconductor (possibly GaN), which would be synthesized by CVD. These quantum properties of semiconductor nanorods include narrow-wavelength-band optical absorption and emission characteristics that vary with temperature. The temperature sensitivity might enable simultaneous measurement of fluctuating temperature and pressure and to provide a temperature correction for the PSP response.

Bencic, Timothy↗