Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “filter methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Episodic Earthquake Swarms in the Mineral Mountains, Utah Driven by the Roosevelt Hydrothermal System

Over 1,000 earthquakes (-2.0 < M < 2.0), identified using a matched-filter method, occurred in the Mineral Mountains, Utah between 2016 and 2019. The enhanced catalog is complete down to M -0.9 and contains roughly 15 times more events than originally cataloged. Earthquake relocation of ~800 earthquakes shows that activity is concentrated in a <2 km long E-W striking narrow zone, ~4 km east of the Roosevelt hydrothermal system. Two fault orientations, both N-S and E-W parallel to the Opal Mound and Mag Lee faults, respectively, are observed after computing composite focal mechanisms of highly similar earthquakes. Looking solely at the temporal distribution of the seismicity, we identify 15 periods of swarm-like activity, with two major clusters occurring in December 2016, recorded by three stations, and in October 2019 recorded by eight stations. The October 2019 swarm, the best recorded sequence in the area, provides evidence for the underlying triggering mechanism. We show that a complex mechanism of fluid diffusion and aseismic slip is responsible for the swarm evolution with migration velocities reaching 10 km/day. We hypothesize that these episodic swarms in the Mineral Mountains are primarily driven by migrating fluids that originate within the Roosevelt hydrothermal system.

58 GEOSCIENCES↗
DOE OSTI2021

Intense quasi-monochromatic resonant harmonic generation in the multiphoton ionization regime

Resonant high-order harmonics, which result in quasimonochromatic extreme ultraviolet light with coherent intensity enhancement involving autoionizing resonances, have been demonstrated from laser-ablated plumes in the tunnel-ionization regime. Here, we demonstrate resonant harmonics in the previously unexplored multiphoton-ionization regime. We demonstrate an intense resonant harmonic from gallium with an intensity enhancement ratio of 714 relative to the neighboring harmonics, achieved without the need for extreme ultraviolet filtering methods, thus preventing a typical photon flux loss of more than 70%. Three-dimensional time-dependent Schrödinger equation calculations reveal that this increase in the enhancement ratio is due to the lowelectron wave packet spreading in the multiphoton-ionization regime. These results reveal a method for increasing the intensity and monochromaticity of intense multimicrojoule femtosecond extreme ultraviolet light and will also facilitate understanding of the involvement of autoionizing resonances in generating resonant harmonics in the multiphoton-ionization regime.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

An intensity-based post-processing tool for 3D instance segmentation of organelles in soft X-ray tomograms

Investigating the 3D structures and rearrangements of organelles within a single cell is critical for better characterizing cellular function. Imaging approaches such as soft X-ray tomography have been widely applied to reveal a complex subcellular organization involving multiple inter-organelle interactions. However, 3D segmentation of organelle instances has been challenging despite its importance in organelle characterization. Here we propose an intensity-based post-processing tool to identify and separate organelle instances. Our tool separates sphere-like (insulin vesicle) and columnar-shaped organelle instances (mitochondrion) based on the intensity of raw tomograms, semantic segmentation masks, and organelle morphology. We validate our tool using synthetic tomograms of organelles and experimental tomograms of pancreatic β -cells to separate insulin vesicle and mitochondria instances. As compared to the commonly used connected regions labeling, watershed, and watershed + Gaussian filter methods, our tool results in improved accuracy in identifying organelles in the synthetic tomograms and an improved description of organelle structures in β -cell tomograms. In addition, under different experimental treatment conditions, significant changes in volumes and intensities of both insulin vesicle and mitochondrion are observed in our instance results, revealing their potential roles in maintaining normal β -cell function. Our tool is expected to be applicable for improving the instance segmentation of other images obtained from different cell types using multiple imaging modalities.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

$\overline{TKE}$ Parameterization and $\bar{v}$ Uncertainty Analysis for CGMF

Previous work was performed on tuning CGMF parameters for 235 U, 238 U, and Plutonium isotopes. Now work is being done to tune minor uranium isotopes. However, uranium isotopes like 232 U and 236 U have almost no experimental data. We are applying cross-isotope models to extrapolate and tune CGMF on isotopes that lack experimental data. There exist several internal CGMF physics quantities that affect the output of CGMF—multi-chance fission probability, excitation energy sharing, spin-cutoff factor, spin scaling, and fragment total kinetic energy to name a few. The mean fragment total kinetic energy, $\overline{TKE}$, is particularly interesting because of its strong anti-correlation with $\bar{v}$. We are most interested in the mean fragment total kinetic energy before neutron emissions. $\overline{TKE}$ is assumed to be pre-neutron emission unless otherwise stated. Currently in CGMF, the $\overline{TKE}$ model for 233,234,235,238 U are tuned independently to reproduce ν for the associated isotopes. In this report, we will tune a cross-isotope $\overline{TKE}$ model to experimental $\overline{TKE}$ data for 232,233,234,235,236,238 U. Because of the unreliable and sparse nature of $\overline{TKE}$ experimental data, future work will use more reliable experimental $\bar{v}$ data to infer the $\overline{TKE}$ model (and likely other internal CGMF parameters) for uranium isotopes. Such work has been performed previously using a sensitivity analysis and Kalman filter methods.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2025

Towards Online Machine Learning in DUNE Data Acquisition

Processing the large volumes of data produced by liquid argon time projection chamber (LArTPC) experiments presents a significant challenge, especially those at the scale of DUNE. This is a particular challenge when aiming to trigger on low-energy neutrinos from core-collapse supernovae, which are typically buried in a high-rate radiological background. To enable real-time event selection suitable for such rare signals, we are developing machine learning based data filtering methods. In order to demonstrate the feasibility of this approach, we implemented such pipeline using the ICEBERG detector at Fermilab as a small-scale LArTPC, with a focus on identifying Michel electrons as a proxy for low-energy neutrino interactions. This poster will present the current status of integrating these machine learning models into the data acquisition (DAQ) system of this detector.

Dalager, Olivia [Fermilab]↗
DOE OSTI2021

Resolved Dwarf Galaxy Searches within ~5 Mpc with the Vera Rubin Observatory and Subaru Hyper Suprime-Cam*

We present a preview of the faint dwarf galaxy discoveries that will be possible with the Vera C. Rubin Observatory and Subaru Hyper Suprime-Cam in the next decade. In this work, we combine deep ground-based images from the Panoramic Imaging Survey of Centaurus and Sculptor (PISCeS) and extensive image simulations to investigate the recovery of faint, resolved dwarf galaxies in the Local Volume with a matched-filter technique. We adopt three fiducial distances - 1.5, 3.5, 5 Mpc, and quantitatively evaluate the effects on dwarf detection of varied stellar backgrounds, ellipticity, and Milky Way foreground contamination and extinction. We show that our matched-filter method is powerful for identifying both compact and extended systems, and near-future surveys will be able to probe at least ~4.5 mag below the tip of the red giant branch (TRGB) for a distance of up to 1.5 Mpc, and ~2 mag below the TRGB at 5 Mpc. This will push the discovery frontier for resolved dwarf galaxies to fainter magnitudes, lower surface brightnesses, and larger distances. Our simulations show the secure census of dwarf galaxies down to $M_{V}$$\approx$-5, -7, -8, will be soon within reach, out to 1.5 Mpc, 3.5 Mpc, and 5 Mpc, respectively, allowing us to quantify the statistical fluctuations in satellite abundances around hosts, and parse environmental effects as a function of host properties.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Numerical analysis of a time discretized method for nonlinear filtering problem with Lévy process observations

Abstract In this paper, we consider a nonlinear filtering model with observations driven by correlated Wiener processes and point processes. We first derive a Zakai equation whose solution is an unnormalized probability density function of the filter solution. Then, we apply a splitting-up technique to decompose the Zakai equation into three stochastic differential equations, based on which we construct a splitting-up approximate solution and prove its half-order convergence. Furthermore, we apply a finite difference method to construct a time semi-discrete approximate solution to the splitting-up system and prove its half-order convergence to the exact solution of the Zakai equation. Finally, we present some numerical experiments to demonstrate the theoretical analysis.

Mathematics↗
DOE OSTI2024

A Solution Method for the Filtered Lifting Line Theory

The filtered lifting line theory presents a continuous form of the inviscid momentum equations of flow over a lifting device, such as a wing or rotor blade, using body forces without mathematical singularities. This theory is also consistent with an actuator line representation of a lifting device. In this work, we present a reformulation of the equations in terms of the local flow angle along the line, which allows solving the stand-alone equations using multivariate root-finding algorithms. This approach can be used to obtain a fast, computationally inexpensive solution of the loading distribution along a wing without the need to perform computational fluid dynamic simulations. We study the requirements in terms of resolution in the spanwise direction and establish the criteria for spacing and minimum amount of points required along the blade to obtain converged solutions. The solutions are compared to results from large-eddy simulations, and we observed excellent agreement with less than a percent difference in quantities along the blade between the methods.

17 WIND ENERGY↗
DOE OSTI2023

Method for concentrating solids and removing solids from a filter medium

Disclosed are methods for concentrating solids and removing solids from a filter medium. The method includes the step of concentrating first particles of a first solid by removing a fluid stream through a filter medium in a filter. At least some of the first particles become blocking particles that block pores of the filter medium. The method also includes the step of inserting second particles of a second solid into the filter. These second particles scrape, vibrate, agglomerate, or a combination thereof along the filter medium, thus dislodging at least a portion of the blocking particles.

Frankman, David↗
DOE OSTI2025

A novel methodology for assessing the hygroscopicity of aerosol filter samples

Abstract. Due to US regulations, concentrations of hygroscopic inorganic sulfate and nitrate have declined in recent years, leading to an increased importance of the hygroscopic nature of organic matter (OM). The hygroscopicity of OM is poorly characterized because only a fraction of the multitude of organic compounds in the atmosphere is readily measured, and there is limited information on their hygroscopic behaviors. Hygroscopicity of aerosol is traditionally measured using a humidified tandem differential mobility analyzer (HTDMA) or electrodynamic balance (EDB). EDB measures water uptake by a single particle. For ambient and chamber studies, HTDMA measurements provide water uptake and particle size information but not chemical composition. To fill this information gap, we developed a novel methodology to assess the water uptake by particles collected on Teflon filters. This method uses the same filter sample for both hygroscopicity measurements and chemical characterization, thereby providing an opportunity to link the measured hygroscopicity with ambient particle composition. To test the method, hygroscopic measurements were conducted in the laboratory for ammonium sulfate, sodium chloride, glucose, and malonic acid, which were collected on 25 mm Teflon filters using an aerosol generator and sampler. Constant-humidity solutions (CHSs), including potassium chloride, barium chloride dihydrate, and potassium sulfate, were employed in a saturated form to maintain the relative humidity (RH) at approximately 84 %, 90 %, and 97 % in small chambers. Our preliminary experiments revealed that, without the pouch, water uptake measurements were not feasible due to rapid water loss during weighing. Additionally, we observed some absorption by the aluminum pouch itself. To account for this, concurrent measurements were conducted for both the loaded and the blank filters at each RH level. Thus, the dry loaded and blank Teflon filters were placed in aluminum pouches with one side open and in RH-controlled chambers for more than 24 h. The wet loaded samples and wet blanks were then weighed using an ultramicrobalance to determine the water uptake by the respective compound and the blank Teflon filter. The net amount of water absorbed by each compound was calculated by subtracting the water uptake of the blank filter from that of the wet loaded filter. Hygroscopic parameters, including the water-to-solute (W / S) ratio, molality, mass fraction solute (mfs), and growth factors (GFs), were calculated from the measurements. The results obtained are consistent with those reported by the Extended Aerosol Inorganics Model (E-AIM) and previous studies utilizing HTDMA and EDB for these compounds, highlighting the accuracy of this new methodology. This new approach enables the hygroscopicity and chemical composition of individual filter samples to be assessed so that in complex mixtures, such as chamber and ambient samples, the total water uptake can be parsed between the inorganic and organic components of the aerosol.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Mechanically stacked tandem photovoltaic cells with intermediate optical filters

A method of fabricating a multi-junction photosensitive device is provided. The method may include fabricating at least two photoactive layers, wherein at least one photoactive layer is fabricated on a transparent substrate, and at least one photoactive layer is fabricated on a reflective substrate, patterning at least one optical filter layer on at least one photoactive layer fabricated on a transparent substrate, and bonding the at least two photoactive layers using cold weld or van der Waals bonding. A multi-junction photosensitive device is also provided. The device may have at least two photoactive layers, and at least one optical filter layer, wherein at least two layers are bonded using cold weld or van der Waals bonding. The optical filter layer may be a Distributed Bragg Reflector.

Forrest, Stephen R.↗
DOE OSTI2024

Validating the Funnel, Filter Paper, and Drainage Method for Maximum Water Holding Capacity Over a Wide Range of Soil Textures

The data provided includes the results of maximum water holding capacity using the funnel, filter paper, and drainage (FFPD) method, as well as soil water retention curves generated from the water desorption method (via pressure cells) for a full range of soil textures. It will also include data from sensitivity trials to test readily available materials and varying conditions the FFPD method could be expanded to use for more accessibility to community scientists. The format will be in data tables.

Nelson, Jessica↗
DOE OSTI2024

Epoxy-based infrared filter assembly and associated fabrication devices and method

Epoxy-based inline infrared (IR) filter assembly, and manufacture and use of the same. Co-axial infrared filter assemblies comprise a substantially cylindrical filter body forming a central cavity characterized by opposing holes at each end. The filter body forms an outer conductor, and SMA connectors coupled to the opposing holes at each end of the body are electrically coupled to form an inner conductor positioned along a long axis of the filter body. An infrared absorbing material (such as castable epoxy resin) fills the central cavity of the filter body. Methods for producing the co-axial infrared filter include pressing SMA connectors into the respective ends of the filter body, electrically coupling the SMA connectors, and filling the filter body with epoxy. Electronic systems for operating a dark matter detector include a feedline comprising a coaxial filter configured to advantageously block infrared noise.

Spahn, Gabriel↗
DOE OSTI2022

Control flow guided lock address prefetch and filtering

A method of prefetching target data includes, in response to detecting a lock-prefixed instruction for execution in a processor, determining a predicted target memory location for the lock-prefixed instruction based on control flow information associating the lock-prefixed instruction with the predicted target memory location. Target data is prefetched from the predicted target memory location to a cache coupled with the processor, and after completion of the prefetching, the lock-prefixed instruction is executed in the processor using the prefetched target data.

Mashimo, Susumu↗
DOE OSTI2022

Continuous Light Absorption Photometer (CLAP) Instrument Handbook

Reliable measurements of aerosol light absorption are crucial for quantifying the radiative forcing of climate. As a consequence, light absorption measurements are recommended for all stations in the Global Atmosphere Watch network, which is coordinated by the World Meteorological Organization. Aerosol light absorption is often dominated by soot-like particles produced by the incomplete combustion of carbonaceous fuels, commonly termed "black carbon", and optical methods are the primary way that equivalent black carbon concentrations are derived. Two basic approaches are used for determining the aerosol light absorption coefficient: in situ methods where the absorption is measured while the particles are suspended in air, and filter-based methods where the particles are deposited on a filter for real-time optical analysis. In situ methods are inherently more accurate because the physical state of the particles can be changed by the act of filtration. Unfortunately, currently available instruments for in situ measurements are more expensive and difficult to operate than filter-based methods, making them better suited for use in intensive field campaigns or as laboratory reference instruments. Filter-based instruments, because of their lower cost and simpler operation, have been the preferred choice for long-term measurements of aerosol light absorption in monitoring networks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

An Inner-Loop Control Method for the Filter-less, Voltage Sensor-less, and PLL-less Grid-Following Inverter-Based Resource

This paper presents a novel inner-loop control method for the inverter-based resource (IBR). The innovative concepts include removing the voltage sensors at the point of common coupling (PCC), removing the inverter interface inductance, and removing the traditional phase-locked loop (PLL) circuits. Simulation is conducted to verify the feasibility of the method. Furthermore, the virtual impedance is applied to the control loop to improve the current THD and dynamics. Compared to the traditional control, the proposed one helps offload the system by reducing the bulky inductors and voltage sensors without compromising the control performance.

grid-forming inverter, inner-loop control, filterl↗
DOE OSTI2021

Deep Learning Denoising Applied to Regional Distance Seismic Data in Utah

Seismic waveform data are generally contaminated by noise from various sources. Suppressing this noise effectively so that the remaining signal of interest can be successfully exploited remains a fundamental problem for the seismological community. To date, the most common noise suppression methods have been based on frequency filtering. These methods, however, are less effective when the signal of interest and noise share similar frequency bands. Inspired by source separation studies in the field of music information retrieval (Jansson et al., 2017) and a recent study in seismology (Zhu et al., 2019), we implemented a seismic denoising method that uses a trained deep convolutional neural network (CNN) model to decompose an input waveform into a signal of interest and noise. In our approach, the CNN provides a signal mask and a noise mask for an input signal. The short-time Fourier transform (STFT) of the estimated signal is obtained by multiplying the signal mask with the STFT of the input signal. To build and test the denoiser, we used carefully compiled signal and noise datasets of seismograms recorded by the University of Utah Seismograph Stations network. Results of test runs involving more than 9000 constructed waveforms suggest that on average the denoiser improves the signal-to-noise ratios (SNRs) by ~5 db, and that most of the recovered signal waveforms have high similarity with respect to the target waveforms (average correlation coefficient of ~0.80) and suffer little distortion. Application to real data suggests that our denoiser achieves on average a factor of up to ~2-5 improvement in SNR over band-pass filtering and can suppress many types of noise that band-pass filtering cannot. For individual waveforms, the improvement can be as high as ~15 db.

58 GEOSCIENCES↗