Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “femtosecond lasers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Femtosecond Laser Desorption Postionization MS vs ToF-SIMS Imaging for Uncovering Biomarkers Buried in Geological Samples

The study of lipid molecular fossils by traditional biomarker analysis requires bulk sample crushing, followed by solvent extraction, and then the analysis of the extract by gas chromatography-mass spectrometry (GC–MS). This traditional analysis mixes all organic compounds in the sample regardless of their origins, with a loss of information on the spatial distribution of organic molecules within the sample. These shortcomings can be overcome using the chemical mapping of intact samples. Spectroscopic techniques such as UV fluorescence or Raman spectroscopy, laser ablation inductively coupled plasma mass spectrometry, and time-of-flight secondary ion mass spectrometry (ToF-SIMS) are among those elemental and molecular mapping techniques. This study employed femtosecond (fs) laser ablation combined with single-photon ionization, a method called fs-laser desorption postionization mass spectrometry (fs-LDPI-MS). In this work, a pulsed ~75 fs, 800 nm laser was used to ablate the geological sample, which was then photoionized after a few microseconds by a pulsed 7.9 eV vacuum ultraviolet laser. An organic carbon-rich geological sample was used for this study to map hydrocarbon biomarkers in sediments that were previously studied by GC–MS. The petrography of this sample was examined by optical and fluorescence microscopy. It is demonstrated here that fs-LDPI-MS combined with petrography for multimodal imaging can expose buried compounds within the sample via in situ layer removal. When used in conjunction with traditional organic geochemical analysis, this method has the potential to determine the spatial distribution of organic biomarkers in geological material. Finally, fs-LDPI-MS imaging data are compared with ToF-SIMS imaging that is commonly used for such studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evolution of glass structure during femtosecond laser assisted crystallization of LaBGeO 5 in glass

Single crystal LaBGeO 5 architecture formed in La 2 O 3 -B 2 O 3 -2GeO 2 glass serves as a model system for understanding of the transformation from glass to single crystal under fs laser irradiation. This transformation is highly sensitive to glass composition, raising the need to understand how the glass structure and composition evolve during crystallization. In this work, micro X-ray absorption spectroscopy and X-ray fluorescence mapping were used to study the glass structure and composition preceding LaBGeO5 crystallization in the region surrounding the single crystal growth front. The results show precipitation of germanium nanoparticles, as well as anisotropic segregation of Ge and La prior to LaBGeO5 crystallization, which are explained assuming electromigration in high fields within the plasma formed by the fs laser irradiation. However, these nanoparticles do not serve as sites for heterogeneous nucleation. Furthermore, the similarity of local structure around Ge in the starting glass and the ultimate crystal appears to enhance the crystallization process.

36 MATERIALS SCIENCE↗
NASA NTRS2005

Pulse energy dependence of subcellular dissection by femtosecond laser pulses

Precise dissection of cells with ultrashort laser pulses requires a clear understanding of how the onset and extent of ablation (i.e., the removal of material) depends on pulse energy. We carried out a systematic study of the energy dependence of the plasma-mediated ablation of fluorescently-labeled subcellular structures in the cytoskeleton and nuclei of fixed endothelial cells using femtosecond, near-infrared laser pulses focused through a high-numerical aperture objective lens (1.4 NA). We find that the energy threshold for photobleaching lies between 0.9 and 1.7 nJ. By comparing the changes in fluorescence with the actual material loss determined by electron microscopy, we find that the threshold for true material ablation is about 20% higher than the photobleaching threshold. This information makes it possible to use the fluorescence to determine the onset of true material ablation without resorting to electron microscopy. We confirm the precision of this technique by severing a single microtubule without disrupting the neighboring microtubules, less than 1 micrometer away. c2005 Optical Society of America.

Non-NASA Center↗
DOE OSTI2022

Non-Intrusive Measurements Using Femtosecond Laser in Atmospheric Pressure Plasma Jet

Femto-second (fs) lasers offer state-of-the art non-intrusive diagnostic capabilities in plasma flow environments. The diagnostics in plasma flows using a fs-laser that are relevant to this proposal include Two-photon Absorption Laser Induced Fluorescence (TALIF) for measuring the number density of an atomic species, and Femto-second Laser Electronic Excitation Tagging (FLEET) for performing velocity measurements in plasma flows. Various aspects of these diagnostics using fs-lasers are still an active domain of research. The TALIF technique has been used to measure the number density of atomic species in various plasma flow environments like atmospheric pressure plasma jet (APPJ) and arc-jet flows. This technique utilizes a fs-laser to excite an atomic species and the subsequent relaxation process through fluorescence is recorded to make measurements. A narrow band-pass filter is used to isolate the fluorescence signal that is in the infra-red regime. However, broad-band background emissions can potentially pass through the filter and induce noise in the TALIF signal. Particularly, arc-jet plasma flows inherently contain background emissions. In such plasma flow environments, in addition to the filter, the background-subtraction technique will play an important role in reducing the noise that is induced in the number density measurements using TALIF. The proposed research focuses on evaluating the effectiveness of a background-subtraction technique by measuring atomic oxygen using a femtosecond (fs) TALIF in APPJ with induced background emissions and comparing measurements obtained without inducing the emissions. Therefore, by quantifying the changes in the signal-to-noise ratio caused by a background-subtraction technique applied for APPJ, it will enable a better understanding of the uncertainties in the background subtracted fs-TALIF measurements for arc-jet plasma flows. In addition to this, FLEET will be used to obtain velocity in the APPJ, and the impact of background emissions will be analyzed. Under this effort, the experimenters and research personnel will gain the technical know-how in the operational and theoretical aspects of the advanced fs-laser-based diagnostic techniques. The knowledge gained in this process will then also directly be applied to a separate ONR funded project at the Aerodynamics Research Center (ARC), UT Arlington, related to arc-jet flow characterization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Imaging solvated oxygen atoms with a femtosecond laser

As a powerful oxidant, atomic oxygen (O) holds considerable promise for a variety of biomedical and industrial applications. However, the inability to quantify solvated oxygen atoms has prevented the determination of the fundamental parameters governing its behaviour in relevant aqueous environments. Here, we directly image ground-state oxygen atoms in water using femtosecond two-photon absorption laser-induced fluorescence. Measurements show that oxygen atoms persist for tens of microseconds in water, penetrating hundreds of micrometres into the liquid. This observed longevity has significant implications, suggesting a need to re-evaluate existing models of solvated atomic oxygen reactivity and transport. Beyond atomic oxygen, this technique is broadly applicable to other solvated atomic species of interest, including nitrogen (N) and hydrogen (H). This work establishes that radical atomic species can be quantified in liquid with ultrafast laser spectroscopy, providing the basis for the determination of key properties including reaction rates, chemical lifetimes, and Henry’s law constants.

Fluorescence spectroscopy↗
DOE OSTI2024

One-dimensional mapping of femtosecond laser filaments using coherent microwave scattering

Here, this paper reports on the use of coherent microwave scattering (CMS) for spatially resolved electron number density measurements of elongated plasma structures induced at mid-IR femtosecond filamentation in air. The presented studies comprise one-dimensional mapping of laser filaments induced via 3.9 µm, 127.3 fs laser pulses at output energies up to 15 mJ. The axial electron number density was measured to be invariant (about 2 × 10 15 c⁢m −3 ) along the entire filament length and for all tested laser pulse energies 5–15 mJ, and the corresponding laser intensity in the middle portion of the filament was estimated to be nearly constant for 5–15 mJ pulse energies (about 30−40 TW/c⁢m 2 ). These findings support that intensity clamping conditions were achieved in the experiments. The proposed approach enables capabilities that are currently unavailable to perform absolute and longitudinally resolved measurements of electron number density in laser filaments and to precisely characterize conditions associated with self-focusing and intensity clamping.

plasma diagnostic techniques↗
DOE OSTI2024

Characterization of blast waves induced by femtosecond laser irradiation in solid targets

Blast waves have been produced in solid target by irradiation with short-pulse high-intensity lasers. The mechanism of production relies on energy deposition from the hot electrons produced by laser–matter interaction, producing a steep temperature gradient inside the target. Hot electrons also produce preheating of the material ahead of the blast wave and expansion of the target rear side, which results in a complex blast wave propagation dynamic. Several diagnostics have been used to characterize the hot electron source, the induced preheating and the velocity of the blast wave. Results are compared to numerical simulations. These show how blast wave pressure is initially very large (more than 100 Mbar), but it decreases very rapidly during propagation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

A six degrees of freedom femtosecond laser system for fabrication of small-scale mechanical property specimens

Here, we present the details of a novel ultra-short pulsed laser machining workstation that has been employed for high-throughput laser machining of small-scale mechanical property specimens. This system employs a six degrees of freedom hexapod positioning stage capable of macroscopic movements at high positional accuracy. We developed a methodology that uses quantitative image analysis to measure key parameters required to minimize the hexapod positioning and rotational error. Application of this system to laser machining of small-scale 316L stainless steel tensile specimens and ultra-high molecular weight polyethylene compressive specimens using eucentric tilt and rotation about the specimen axis will be shown, where serial laser milling at a specimen tilt angle of 10° was used to effectively eliminate any taper in the sample cross section that is typically found in laser machining.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Efficiency enhancement of thermonuclear DD reaction in femtosecond laser plasma with the use of structured low-average-density targets

An increase in the yield of fast neutrons is experimentally demonstrated by exciting a nuclear DD reaction in the interaction of a relativistically intense (over 10{sup 18} W cm{sup −2}) ultrashort laser pulse with a deuterated low-average-density target volume-structured at the wavelength scale. It is shown that decreasing the average target density from 0.78 to 0.35 g cm{sup −3} doubles the neutron flux, which reaches 7 × 10{sup 4} particles per 1 J of input energy. The effect may be associated with an increase in the number of accelerated deuterium ions due to the three dimensional expansion of individual elements of the target structure. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Two-stage nonlinear compression of high-power femtosecond laser pulses

Two-stage compression of laser pulses with a power of 250 TW is experimentally realised by broadening their spectrum during self-phase modulation in fused silica and subsequent dispersion compensation upon reflection from chirping mirrors. A five-fold decrease in the duration is demonstrated, from 75 to 15 fs, with a B-integral value of about 5 at each stage. It is possible to avoid small-scale self-focusing due to self-filtering of the laser beam during free propagation in vacuum. With optimal parameters of the dispersive mirror, the pulse can be compressed to a duration of less than 5 fs. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Effect of optical field ionisation on the generation of wake fields by femtosecond laser pulses in an inhomogeneous plasma

We consider the interaction of a high-intensity short laser pulse with an argon gas during optical field ionisation. Modelling in a three-dimensional cylindrical symmetric geometry is performed at various moderately relativistic intensities and positions of the focal plane of the laser beam in the case of both optical gas ionisation and a pre-ionised plasma. The influence of the processes occurring during optical field ionisation of the gas on the generation of wake waves is investigated, and the conditions are found under which intense wake fields are produced in a plasma formed from an inhomogeneous argon gas jet. The possibility of using a gas with a large number of electrons on the outer shell (argon) to excite intense wake waves and accelerate electrons is demonstrated. Despite significant ionisation refraction of the laser pulse on a radially inhomogeneous density profile of plasma electrons formed during optical field ionisation, the region of the parameters of the laser pulse and the gas target is determined at which ionisation refraction leads to the excitation of an intense wake wave. It is found that in a pre-ionised plasma a wake wave is not generated even at the same laser radiation intensity. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗