Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “external quantum efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Demonstration of Spectral Selectivity of Efficient and Ultrafast GaN/AlGaN-Based Metal–Semiconductor–Metal Ultraviolet Photodiodes

Efficient and ultrafast (aluminum)-gallium-nitride-based metal-semiconductor-metal (Al x )Ga 1–x N ultraviolet photodiodes were implemented to investigate the spectral properties of GaN/AlGaN-based photodetectors. Al composition of the GaN templates were varied from 0-% to 30% to demonstrate the impact of Al mole fraction on the cutoff wavelength of these UV photodiodes. Asymmetric metal contact electrodes were fabricated to optimize the external quantum efficiency without compromising their ultrafast photoresponse. Here, the best performing devices exhibited a peak response of 4 V and an oscilloscope limited temporal pulse width of 61 ps at a 20-V bias with a peak spectral responsivity of 36.5 mA/W at 280 nm.

42 ENGINEERING↗
DOE OSTI2022

Reducing Spontaneous Orientational Polarization via Semiconductor Dilution Improves OLED Efficiency and Lifetime

Spontaneous orientational polarization (SOP) in the electron-transport layer (ETL) of organic light-emitting diodes (OLEDs) is increasingly recognized as a key factor influencing their performance. Here, we show that SOP is dramatically reduced in the common electron-transport material 2,2',2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) by coevaporating it together with medium-density polyethylene. Eliminating SOP from the ETL of blue fluorescent OLEDs in this manner reduces their operating voltage by 0.5 V, increases their external quantum efficiency (EQE) by 30%, and leads to a threefold increase in device lifetime. We show that the EQE and lifetime improvements both originate from reduced exciton-polaron annihilation in the emissive layer, and that this leads to a functional relationship between the two quantities that can be used to quantify the rate of annihilation-induced degradation in the device. Furthermore, these results highlight a substantial opportunity to improve OLED performance by controlling SOP through semiconductor dilution and suggest that this capability can be used to systematically isolate and understand exciton-polaron degradation in the pursuit of stable blue OLEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Eutectic Processing of Semiconductor Colloidal Nanocrystals for Energy Applications

Colloidal semiconductor nanocrystals (NCs) offer a costeffective platform for light-energy conversion in X-ray scintillators, photovoltaics, lasers, and display technologies. Yet, device-relevant NCs often require complex heterostructured compositions, where lattice imperfections compromise the efficiency and stability of photoconversion processes. Here, we show that a simple synthetic detour through a eutectic state of II−VI semiconductor NCs (e.g., CdSe, ZnSe) with halide salts (e.g., CdCl 2 , ZnCl 2 ) overcomes this limitation by melting and reconstructing NC lattices into defect-free alloyed and core/shell architectures. Applied to ternary CdSeTe NCs, this process produces downconverters with record brightness and minimal line widths, delivering a 3-fold increase in film-side external quantum efficiency of commercial CdTe photovoltaic modules (First Solar Inc.). Meanwhile, eutectic processing of CdSe-based core/shell emitters yields an 8-fold enhancement in their photoluminescence stability under backlight operation, addressing the reliability bottleneck for display technologies. Together, these findings establish eutectic NC processing as a scalable route to efficient, durable photoconversion materials for energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Control of Host-Matrix Morphology Enables Efficient Deep-Blue Organic Light-Emitting Devices

Mixing a sterically bulky, electron-transporting host material into a conventional single host–guest emissive layer is demonstrated to suppress phase separation of the host matrix while increasing the efficiency and operational lifetime of deep-blue phosphorescent organic light-emitting diodes (PHOLEDs) with chromaticity coordinates of (0.14, 0.15). Here, the bulky host enables homogenous mixing of the molecules comprising the emissive layer while suppressing single host aggregation; a significant loss channel of nonradiative recombination. By controlling the amorphous phase of the host-matrix morphology, the mixed-host device achieves a significant reduction in nonradiative exciton decay, resulting in 120 ± 6% increase in external quantum efficiency relative to an analogous, single-host device. In contrast to single host PHOLEDs where electrons are transported by the host and holes by the dopants, both charge carriers are conducted by the mixed host, reducing the probability of exciton annihilation, thereby doubling of the deep-blue PHOLED operational lifetime. These findings demonstrate that the host matrix morphology affects almost every aspect of PHOLED performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Efficiency cliff in scaling InGaN light-emitting diodes down to submicron

The top-down submicron fabrication of blue-emitting light-emitting diodes on Qromis Substrate Technology substrates is reported. Light-emitting diodes with mesa sizes as small as 250 × 250 nm 2 show ideal forward voltage and low leakage current density. It is observed that sidewall treatment and passivation methods used in micro-light-emitting diodes (2–20 μ m) do not lead to the same level of sidewall recombination suppression for submicron ones (< 1 μ m), as evidenced by a ∼70% decrease in peak external quantum efficiencies when mesa sizes are scaled from 2 μ m down to 250 nm. This is attributed to the lateral carrier diffusion being comparable to the mesa size, regardless of the sidewall passivation and recovery. The results call for rethinking the impact of sidewalls in emerging top-down fabricated (sub)micrometer-light-emitting diodes.

42 ENGINEERING↗
DOE OSTI2022

Improved Radiative Recombination in AlInGaP LEDs

Direct-emitting red and amber LEDs based on the AlInGaP material system offer a higher efficacy potential than phosphor-converted (pc) red and amber LEDs due to the absence of Stokes losses. Direct red LEDs (~610-620nm) are increasingly used in color-mixed and color-tunable illumination applications, where they have a significant advantage over pc-red LEDs, with high power conversion efficiency (PCE) and narrower emission enabling higher luminous efficacy of radiation (LER). Still, adoption is limited as the complexities associated with mixing different emitters offset the value of the efficacy gain. Adoption of direct amber LEDs (~580-595nm) in illumination applications is virtually non-existent due to their lower PCE and the availability of very efficient pc-amber emitters, which suffer less from Stokes loss and LER penalties associated with the broader bandwidth than pc-red. Further improvement in PCE of direct red and amber LEDs is needed to achieve wider adoption and ultimately enable more energy savings than possible with pc-LEDs. In this project, Lumileds has developed improved high-power amber and red LEDs incorporating tensile-strain barriers into the active region to improve carrier confinement and thereby increase external quantum efficiency (EQE). This approach is most beneficial for the short (amber) end of the AlInGaP wavelength range where carrier confinement is lowest. An EQE of 22% was achieved for amber LEDs, exceeding the project target of 20%

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Color‐Stable, All‐Phosphorescent White Organic Light Emitting Diodes Using the Polariton‐Enhanced Purcell Effect

Abstract The short operational lifetimes of high efficiency phosphorescent organic blue light emitting devices (PHOLEDs) has limited their use in displays and lighting. Previously, this problem has been avoided by using less efficient fluorescent blue devices in separately biased red, green, and blue emissive elements to achieve stable full color emission. However, the operational lifetime of blue phosphorescent OLEDs has been significantly improved through the utilization of the plasmon‐exciton‐polariton‐enhanced (PEP) Purcell effect. Here, a white emitting PHOLED comprising stacked red, green, and blue elements is demonstrated that exploits PEPs to extend the operational lifetime of the blue element such that all emissive layers degrade at the same rate. The device features white light emission with an external quantum efficiency of 19.1 ± 0.4%, luminous power efficiency of 13.3 ± 0.3 lm W −1 at a luminance of 1000 cd m −2 when measured over 4π solid angle, with a color rendering index of 76 unchanged throughout the device aging to 70% of its initial luminance, T 70 . A 2.9 times enhancement in the operational lifetime of the Purcell‐enhanced device is achieved to yield T 70 = 2900 ± 100 h for an initial luminance of 1000 cd m −2 , compared to devices lacking this enhancement with T 70 = 1000 ± 100 h.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Efficient, Color-Stable, and Long-Lived White Organic Light-Emitting Diodes Utilizing Phosphorescent Molecular Aggregates

Highly efficient and stable single-stack hybrid white organic light-emitting diode (WOLED) devices are developed using two emissive layers: one with amber-colored phosphorescent molecular-aggregate emission from the Pd(II) complex, Pd(II) 7-(3-(pyridine-2-yl-κN)phenoxy-κC)(benzo-κC)([c]benzo[4,5]imidazo-κN)[1,2-a][1,5]naphthyridine, Pd3O8-Py5, and the other with blue fluorescence emission. Here, an optimized device structure achieves high color stability under various current densities, an external quantum efficiency (EQE) of 45.5%, a power efficiency of 97.4 Lm W -1 , and an estimated LT 95 (operational time to 95% of the initial luminance) of 50 744 h at an initial luminance of 1000 cd m -2 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Surface-binding molecular multipods strengthen the halide perovskite lattice and boost luminescence

Reducing the size of perovskite crystals to confine excitons and passivating surface defects has fueled a significant advance in the luminescence efficiency of perovskite light-emitting diodes (LEDs). However, the persistent gap between the optical limit of electroluminescence efficiency and the photoluminescence efficiency of colloidal perovskite nanocrystals (PeNCs) suggests that defect passivation alone is not sufficient to achieve highly efficient colloidal PeNC-LEDs. Here, we present a materials approach to controlling the dynamic nature of the perovskite surface. Our experimental and theoretical studies reveal that conjugated molecular multipods (CMMs) adsorb onto the perovskite surface by multipodal hydrogen bonding and van der Waals interactions, strengthening the near-surface perovskite lattice and reducing ionic fluctuations which are related to nonradiative recombination. The CMM treatment strengthens the perovskite lattice and suppresses its dynamic disorder, resulting in a near-unity photoluminescence quantum yield of PeNC films and a high external quantum efficiency (26.1%) of PeNC-LED with pure green emission that matches the Rec.2020 color standard for next-generation vivid displays.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Investigation on the AgPt and AgPd hybrid alloy nanoparticles (HANPs) for the hybrid MoS 2 /ZnO/HANP UV photodetector application

We report hybrid photodetectors made of two or more nanomaterial components can offer the high potential for advanced photodetection applications with enhanced light absorption, improved efficiency and structural tunability. A hybrid UV photodetector (PD) configuration incorporating the plasmonic hybrid alloy nanoparticles (HANP), ZnO quantum dots (QDs) and MoS 2 nanoflakes, namely MoS2/ZnO/HANP PD, is demonstrated. The optimized MoS 2 /ZnO/HANP PD exhibits a high photocurrent of 5.66 mA at 0.34 mW/mm 2 under 385 nm illumination with two orders of improvement from the bare ZnO, which is one of the highest photocurrents by the ZnO-based PDs. It also demonstrates high figure-of-merits with the responsivity of 14,523 mA/W, detectivity of 8.13 x 10 11 jones, and external quantum efficiency (EQE) of 4,680 %, outperforming most of the ZnO-based hybrid architectures. The enhanced photoresponse is primarily attributed to the significantly enhanced hot electron generation by the AgPd HANPs and photocarrier collection through the ZnO QD layer. MoS 2 nanoflakes also provide additional photon absorption sites and boost the photo-carrier transfer process. HANPs are grown by adapting a dual-step solid-state dewetting process (SSD) approach and the superiority of AgPd HANPs is confirmed by systematic investigation, FDTD simulation and comparison of AgPt and AgPd HANPs.

MoS2↗
DOE OSTI2022

New bipolar host materials for high power efficiency green thermally activated delayed fluorescence $\mathrm{OLEDs}$

We report four bipolar molecules, namely m-CzPym, p-CzPym, m-CzTrz, and p-CzTrz, with carbazole (Cz) donor and a benzonitrile-substituted pyrimidine (Pym) or triazine (Trz) acceptor core were synthesized and characterized. The electron deficiency of heteroaryl cores together with the substitution pattern of benzonitrile were employed to tune the energy levels as well as the thermally activated delayed fluorescence (TADF) characteristics. The four molecules exhibited TADF behavior with inferior photoluminescent quantum yields (PLQYs) that limit their applications as emitters. These bipolar molecules were employed as TADF host materials for the benchmark TADF emitter 4CzIPN to achieve high-performing green TADF organic light-emitting diodes (OLEDs). Among the molecules, m-CzPym-hosted TADF-OLEDs achieved a maximum external quantum efficiency (EQE max ) of 31.5%, maximum power efficiency (PE max ) of 95.6 lm/W, and maximum current efficiency (CE max ) of 100.2 cd/A. Notably, p-CzPym-hosted TADF-OLEDs also achieved a PE max of 116.5 lm/W, turn-on voltage of 2.5 V, and impressive low efficiency roll-off performance (>89% of EQE max at 5000 cd/m 2 ), representing one of the highest efficiencies ever reported in 4CzIPN-doped devices. The high device efficiency can be ascribed to the balanced ambipolar carrier-transporting character of the host materials and high PLQY as well as the outstanding light outcoupling efficiency of the emitting layer.

42 ENGINEERING↗
DOE OSTI2023

High-efficiency stretchable light-emitting polymers from thermally activated delayed fluorescence

Stretchable light-emitting materials are the key components for realizing skin-like displays and optical biostimulation. All the stretchable emitters reported to date, to the best of our knowledge, have been based on electroluminescent polymers that only harness singlet excitons, limiting their theoretical quantum yield to 25%. Here we present a design concept for imparting stretchability onto electroluminescent polymers that can harness all the excitons through thermally activated delayed fluorescence, thereby reaching a near-unity theoretical quantum yield. We show that our design strategy of inserting flexible, linear units into a polymer backbone can substantially increase the mechanical stretchability without affecting the underlying electroluminescent processes. As a result, our synthesized polymer achieves a stretchability of 125%, with an external quantum efficiency of 10%. Additionally, we demonstrate a fully stretchable organic light-emitting diode, confirming that the proposed stretchable thermally activated delayed fluorescence polymers provide a path towards simultaneously achieving desirable electroluminescent and mechanical characteristics, including high efficiency, brightness, switching speed and stretchability as well as low driving voltage.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Reduced Energetic Disorders in Dion–Jacobson Perovskites for Efficient and Spectral Stable Blue LEDs

Metal halide perovskites have witnessed great success in green, red, and near-infrared light-emitting diodes (LEDs), yet blue LEDs still lag behind. Reducing undesired energetic disorders – broad n -phases and halide segregation – is considered as the most critical strategy to further improve the performances. Here, the study reports a newly designed and synthesized di-ammonium ligand with rigid π -conjugated rings and additional methyl groups to construct Dion–Jacobson (DJ) structure. Augmented coordination from the extra ammonium site and increased effective bulkiness from methyl groups lead to better distribution control over conventional mono-ammonium ligands. This enhances the radiative recombination of blue emissions in the film with homogeneous energy landscape and improved surface morphology, as evidenced by a series of imaging and mapping techniques. As a result, it demonstrates DJ perovskite LEDs (PeLEDs) with peak external quantum efficiencies of ≈4% at 484 nm and ≈11% at 494 nm, which are among the top reported for pure DJ phase-based PeLEDs in the corresponding wavelength regions. The results deepen the understanding of regulating energetic disorders in perovskite materials via molecular engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dual interfacial H-bonding-enhanced deep-blue hybrid copper–iodide LEDs

Solution-processed light-emitting diodes based on non-toxic copper–iodide hybrids are a compelling solution for efficient and stable deep-blue lighting, owing to their tunability, high photoluminescence efficiency and environmental sustainability. Here we present a hybrid copper–iodide that shows near-unity photoluminescence quantum yield (99.6%) with an emission wavelength of 449 nm and colour coordinates (0.147, 0.087), alongside its emission mechanism and charge transport characteristics. Here, we use the thin film of this hybrid as the sole active emissive layer to fabricate deep-blue light-emitting diodes and subsequently enhance the device performance through a dual interfacial hydrogen-bond passivation strategy. This synergetic surface modification approach, integrating a hydrogen-bond-acceptor self-assembled monolayer with an ultrathin polymethyl methacrylate capping layer, effectively passivates both heterojunctions of the copper–iodide hybrid emissive layer and optimizes charge injections. We achieve a maximum external quantum efficiency of 12.57%, a maximum luminance of 3,970.30 cd m −2 with colour coordinates (0.147, 0.091) and an excellent operational stability (half-lifetime) of 204 hours under ambient conditions. We further showcase a large-area device of 4 cm 2 that maintains high efficiency. Our findings reveal the potential of copper–iodide-based hybrid materials for applications in solid-state lighting and display technologies, offering a versatile strategy for enhancing device performances.

14 SOLAR ENERGY↗
DOE OSTI2024

Improved Operational Stability of Blue Phosphorescent OLEDs by Functionalizing Phenyl‐Carbene Groups of Tetradentate Pt(II) Complexes

Abstract Stable and efficient deep‐blue organic light‐emitting diodes (OLEDs) are in high demand for display and lighting applications but are rarely reported due to their poor operational lifetimes. Herein, the study designs and synthesizes two novel N ‐heterocyclic carbene (NHC)‐based tetradentate Pt(II) complexes PtON5‐dtb and PtON5N‐dtb, and thoroughly investigate their electrochemical and photophysical properties. Functionalization of the NHC moieties can increase the metal‐to‐ligand charge transfer ( 1/3 MLCT) characters in their lowest triplet excited‐states, resulting in significantly shortened photoluminescent lifetimes and remarkably improved device performance. A deep blue OLED employing PtON5N‐dtb as an emitter exhibits a narrow spectral bandwidth with a full‐width at half maximum (FWHM) of 30 nm and a CIE y value of 0.17 and demonstrates a maximum external quantum efficiency (EQE) of 20.4% with a small efficiency roll‐off, which maintains a high EQE of 18.5% at 1000 cd m −2 . Moreover, the deep blue OLED also realizes a long‐measured operational lifetime LT 90 (time to 90% of the initial luminance) of 71 hours with an initial brightness of 1134 cd m −2 , corresponding to an estimated device lifetime LT 90 of 85 h at 1000 cd m −2 . This represented an eightfold lifetime improvement for PtON5N‐dtb‐based deep blue OLED compared to PtON7‐dtb in the same device setting.

Li, Guijie↗
DOE OSTI2022

High-performance organic photodetectors enabled by a refined fibrillar multiphase morphology

Film morphology of donor:acceptor blend layers plays a critical role in photon-to-current efficiency and dark/noise current of organic photodetectors (OPDs). One effective approach to manipulate crystallization and mesoscale phase separation of such blend layers is sequential casting (SC). However, the guiding strategies to control the morphology and the impacts on OPD performance of the SC films remain elusive, as the film structural evolution during SC is different from conventional blend casting (BC). In this report a refined fibrillar multiphase morphology is demonstrated by SC in an NT812:IEICO-4F blend film, where the high-quality IEICO-4F crystallites infiltrate the robust NT812 fibril network from the surface to the bulk. Such a morphology leads to improved charge generation and collection, reduced trap states, and enhanced charge block capability of resultant device, enabling simultaneous achievement of high external quantum efficiency and low dark/noise current. A maximum special detectivity of 5 × 10 13 Jones is achieved at 860 nm under –0.1 V, which is among the highest detectivities for vis-to-NIR OPDs. The linear dynamic range and response speed are also improved. Such enhancements are parallelly observed from OPD devices based on other blend systems with similar fibrillar refinement, which provides guidelines for film structure manipulation towards high OPD performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Rationally Engineered Vertically Aligned β ‐Ga 2− x W x O 3 Nanocomposites for Self‐Biased Solar‐Blind Ultraviolet Photodetectors with Ultrafast Response

Abstract With the astonishing advancement of present technology and increasing energy consumption, there is an ever‐increasing demand for energy‐efficient multifunctional sensors or transducers based on low‐cost, eco‐friendly material systems. In this context, self‐assembled vertically aligned β ‐Ga 2− x W x O 3 nanocomposite (GWO‐VAN) architecture‐assisted self‐biased solar‐blind UV photodetection on a silicon platform, which is the heart of traditional electronics is presented. Utilizing precisely controlled growth parameters, the formation of W‐enriched vertical β ‐Ga 2− x W x O 3 nanocolumns embedded into the W‐deficient β ‐Ga 2− x W x O 3 matrix is reached. Detailed structural and morphological analyses evidently confirm the presence of β ‐Ga 2− x W x O 3 nanocomposite with a high structural and chemical quality. Furthermore, absorption and photoluminescence spectroscopy explains photo‐absorption dynamics and the recombination through possible donor–acceptor energy states. The proposed GWO‐VAN framework facilitates evenly dispersed nanoregions with asymmetric donor energy state distribution and thus forms build‐in potential at the vertical β ‐Ga 2− x W x O 3 interfaces. As a result, the overall heterostructure evinces photovoltaic nature under the UV irradiation. A responsivity of ≈30 A/W is observed with an ultrafast response time (≈350 µs) under transient triggering conditions. Corresponding detectivity and external quantum efficiency are 7.9 × 10 12 Jones and 1.4 × 10 4 %, respectively. It is believed that, while this is the first report exploiting GWO‐VAN architecture to manifest self‐biased solar‐blind UV photodetection, the implication of the approach is enormous in designing electronics for extreme environment functionality and has immense potential to demonstrate drastic improvement in low‐cost UV photodetector technology.

Das, Debabrata↗
DOE OSTI2023

Twisted Crystalline Organic Semiconductor Photodetectors

Optoelectronic properties of anisotropic crystals vary with direction requiring that the orientation of molecular organic semiconductor crystals is controlled in optoelectronic device active layers to achieve optimal performance. Here, in this work, a generalizable strategy to introduce periodic variations in the out-of-plane orientations of 5,11-bis(triisopropylsilylethynyl)anthradithiophene (TIPS ADT) crystals is presented. TIPS ADT crystallized from the melt in the presence of 16 wt.% polyethylene (PE) forms banded spherulites of crystalline fibrils that twist in concert about the radial growth direction. These spherulites exhibit band-dependent light absorption, photoluminescence, and Raman scattering depending on the local orientation of crystals. Mueller matrix imaging reveals strong circular extinction (CE), with TIPS ADT banded spherulites exhibiting domains of positive or negative CE signal depending on the crystal twisting sense. Furthermore, orientation-dependent enhancement in charge injection and extraction in films of twisted TIPS ADT crystals compared to films of straight crystals is visualized in local conductive atomic force microscopy maps. This enhancement leads to 3.3- and 6.2-times larger photocurrents and external quantum efficiencies, respectively, in photodetectors comprising twisted crystals than those comprising straight crystals.

36 MATERIALS SCIENCE↗