Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “excessive carriers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Gain roll-off in cadmium selenide colloidal quantum wells under intense optical excitation

Colloidal quantum wells, or nanoplatelets, show among the lowest thresholds for amplified spontaneous emission and lasing among solution-cast materials and among the highest modal gains of any known materials. Using solution measurements of colloidal quantum wells, this work shows that under photoexcitation, optical gain increases with pump fluence before rolling off due to broad photoinduced absorption at energies lower than the band gap. Despite the common occurrence of gain induced by an electron–hole plasma found in bulk materials and epitaxial quantum wells, under no measurement conditions was the excitonic absorption of the colloidal quantum wells extinguished and gain arising from a plasma observed. Instead, like gain, excitonic absorption reaches a minimum intensity near a photoinduced carrier sheet density of 2 × 10 13 cm –2 above which the absorption peak begins to recover. To understand the origins of these saturation and reversal effects, measurements were performed with different excitation energies, which deposit differing amounts of excess energy above the band gap. Across many samples, it was consistently observed that less energetic excitation results in stronger excitonic bleaching and gain for a given carrier density. Transient and static optical measurements at elevated temperatures, as well as transient X-ray diffraction of the samples, suggest that the origin of gain saturation and reversal is a heating and disordering of the colloidal quantum wells which produces sub-gap photoinduced absorption.

36 MATERIALS SCIENCE↗

Controlling Interfacial Energetics and Charge Transfer Rates in 2D Semiconductors: Fundamental Studies en Route to Photoelectrochemical Energy Conversion Beyond the Shockley-Queisser Limit (Final Scientific/Technical Report)

Current photovoltaic and solar-to-fuel technologies do not fully utilize the energy of sunlight because excess photon energy above the semiconductor band gap is rapidly lost as heat through hot-carrier thermalization. Overcoming this loss mechanism is critical, as hot-carrier-based energy conversion systems are predicted to exceed the conventional efficiency limit of ~33%. This project advanced fundamental understanding of hot-carrier energy conversion in two-dimensional (2D) semiconductors, with a focus on monolayer MoS 2 . Using a combination of electrochemical microscopy and in situ ultrafast spectroscopic measurements, this research directly demonstrated hot-carrier extraction from monolayer MoS 2 photoelectrodes in proof-of-concept liquid junction solar cells. These measurements established that hot-carrier transfer can compete with ultrafast carrier cooling at solid–liquid interfaces, providing unambiguous experimental evidence that hot-carrier extraction is feasible in atomically thin semiconductors under operating photoelectrochemical conditions. Beyond demonstration, the project identified design rules for tuning hot-carrier extraction rates relative to cooling rates in 2D semiconductor photoelectrodes. The outcomes of this research provide foundational thermodynamic and kinetic insights for the rational design of next-generation hot-carrier-enabled solar energy conversion systems. These findings have broad implications for photoelectrochemical solar fuels production, electrocatalysis, and emerging energy conversion architectures that seek to harness nonequilibrium charge carriers for enhanced efficiency.

14 SOLAR ENERGY↗

Non-Markovian Hole Excess Noise in Avalanche Amorphous Selenium Thin Films

Enhancing the signal-to-noise ratio in avalanche photodiodes by utilizing impact ionization gain requires materials exhibiting low excess noise factors. Amorphous selenium (a-Se) as a wide bandgap at ~2.1 eV, a solid-state avalanche layer, demonstrates single-carrier hole impact ionization gain and manifests ultralow thermal generation rates. A comprehensive study of the history dependent and non-Markovian nature of hot hole transport in a-Se was modeled using a Monte Carlo (MC) random walk of single hole free flights, interrupted by instantaneous phonon, disorder, hole–dipole, and impact-ionization scattering interactions. The hole excess noise factors were simulated for 0.1–15 μm a-Se thin-films as a function of mean avalanche gain. The hole excess noise factors in a-Se decreases with an increase in electric field, impact ionization gain, and device thickness. The history dependent nature of branching of holes is explained using a Gaussian avalanche threshold distance distribution and the dead space distance, which increases determinism in the stochastic impact ionization process. An ultralow non-Markovian excess noise factor of ~1 was simulated for 100 nm a-Se thin films corresponding to avalanche gains of 1000. Future detector designs can utilize the nonlocal/non-Markovian nature of the hole avalanche in a-Se, to enable a true solid-state photomultiplier with noiseless gain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

UV‐induced degradation of high‐efficiency silicon PV modules with different cell architectures

Abstract Degradation from ultraviolet (UV) radiation has become prevalent in the front of solar cells due to the introduction of UV‐transmitting encapsulants in photovoltaic (PV) module construction. Here, we examine UV‐induced degradation (UVID) in various commercial, unencapsulated crystalline silicon cell technologies, including bifacial silicon heterojunction (HJ), interdigitated back contact (IBC), passivated emitter and rear contact (PERC), and passivated emitter rear totally diffused (PERT) solar cells. We performed UV exposure tests using UVA‐340 fluorescent lamps at 1.24 W·m −2 (at 340 nm) and 45°C through 4.02 MJ·m −2 (2000 h). Our results showed that modern cell architectures are more vulnerable to UVID, leading to a significant power decrease (−3.6% on average; −11.8% maximum) compared with the conventional aluminum back surface field (Al‐BSF) cells (<−1% on average). The power degradation is largely caused by the decrease in short‐circuit current and open‐circuit voltage. A greater power decrease is observed in bifacial cells with rear‐side exposure compared with those with front‐side exposure, indicating that the rear side is more susceptible to UV damage. Secondary ion mass spectroscopy (SIMS) confirmed an increase in hydrogen concentration near the Si/passivation interface in HJ and IBC cells after UV exposure; the excess of hydrogen could result in hydrogen‐induced degradation and subsequently cause higher recombination losses. Additionally, surface oxidation and hot‐carrier damage were identified in PERT cells. Using a spectral‐based analysis, we obtained an acceleration factor of 5× between unpackaged cells (containing a silicon nitride antireflective coating on the front) in the UV test and an encapsulated module (with the front glass and encapsulant blocking 90% of the UV at 294 nm and 353 nm, respectively) in outdoor conditions. From the analytical calculations, we show that a UV‐blocking encapsulant can reduce UV transmission in the module by an additional factor of ~50.

14 SOLAR ENERGY↗

The Role of Metal-Semiconductor Interface in Hybrid Perovskite Devices for High-Performance Radiation Photon Counting

Halide perovskites are promising optoelectronic semiconductors. For applications in solid-state detectors that operate in low photon flux counting mode, blocking interfaces are essential to minimize the dark current noise. Here, we investigate the interface between methylammonium lead tri-iodide (MAPbI 3 ) single crystals and commonly used high and low work function metals to achieve photon counting capabilities in a solid-state detector. Using scanning photocurrent microscopy, we observe a large Schottky barrier at the MAPbI 3 /Pb interface, which efficiently blocks dark current. Moreover, the shape of the photocurrent profile indicates that the MAPbI 3 single-crystal surface has a deep fermi level close to that of Au. Rationalized by first-principle calculations, we attribute this observation to the defects due to excess iodine on the surface underpinning emergence of deep band-edge states. The photocurrent decay profile yields a charge carrier diffusion length of 10–25 μm. Using this knowledge, we demonstrate a single-crystal MAPbI 3 detector that can count single γ-ray photons by producing sharp electrical pulses with a fast rise time of <2 μs. Overall, our study indicates that the interface plays a crucial role in solid-state detectors operating in photon counting mode.

36 MATERIALS SCIENCE↗

N2-to-NH3 conversion by excess electrons trapped in point vacancies on 5f-element dioxide surfaces

Ammonia (NH 3 ) is one of the basic chemicals in artificial fertilizers and a promising carbon-free energy storage carrier. Its industrial synthesis is typically realized via the Haber−Bosch process using traditional iron-based catalysts. Developing advanced catalysts that can reduce the N 2 activation barrier and make NH 3 synthesis more efficient is a long-term goal in the field. Most heterogeneous catalysts for N 2 -to-NH 3 conversion are multicomponent systems with singly dispersed metal clusters on supporting materials to activate N 2 and H 2 molecules. Herein, we report single-component heterogeneous catalysts based on 5 f actinide dioxide surfaces (ThO 2 and UO 2 ) with oxygen vacancies for N 2 -to-NH 3 conversion. The reaction cycle we propose is enabled by a dual-site mechanism, where N 2 and H 2 can be activated at different vacancy sites on the same surface; NH 3 is subsequently formed by H − migration on the surface via associative pathways. Oxygen vacancies recover to their initial states after the release of two molecules of NH 3 , making it possible for the catalytic cycle to continue. Our work demonstrates the catalytic activities of oxygen vacancies on 5 f actinide dioxide surfaces for N 2 activation, which may inspire the search for highly efficient, single-component catalysts that are easy to synthesize and control for NH 3 conversion.

36 MATERIALS SCIENCE↗

Minimizing Interfacial Recombination in 1.8 eV Triple‐Halide Perovskites for 27.5% Efficient All‐Perovskite Tandems

Abstract All‐perovskite tandem solar cells show great potential to enable the highest performance at reasonable costs for a viable market entry in the near future. In particular, wide‐bandgap (WBG) perovskites with higher open‐circuit voltage ( V OC ) are essential to further improve the tandem solar cells’ performance. Here, a new 1.8 eV bandgap triple‐halide perovskite composition in conjunction with a piperazinium iodide (PI) surface treatment is developed. With structural analysis, it is found that the PI modifies the surface through a reduction of excess lead iodide in the perovskite and additionally penetrates the bulk. Constant light‐induced magneto‐transport measurements are applied to separately resolve charge carrier properties of electrons and holes. These measurements reveal a reduced deep trap state density, and improved steady‐state carrier lifetime (factor 2.6) and diffusion lengths (factor 1.6). As a result, WBG PSCs achieve 1.36 V V OC , reaching 90% of the radiative limit. Combined with a 1.26 eV narrow bandgap (NBG) perovskite with a rubidium iodide additive, this enables a tandem cell with a certified scan efficiency of 27.5%.

14 SOLAR ENERGY↗

Pyrolyzer Assisted Vapor Transport Deposition of Antimony-Doped Cadmium Telluride

In this study, we developed a new method for in situ Sb doping of CdTe thin films combining vapor transport deposition with a Group V pyrolyzer to address Sb doping concentration and doping efficiency. The Sb doped CdSeTe (CdSeTe:Sb) films were deposited in solar cell structures under variations of Sb dopant source heater, vapor pyrolyzer temperature, and Cd vapor excess. Results indicate that although these parameters do not affect the CdTe morphology or crystal structure, they critically influence doping efficiency and trap concentration. Capacitance-voltage measurements show that a higher dopant heater (TD) or pyrolyzer (TP) temperature leads to higher net carrier concentration, achieving a net carrier concentration of 1016 cm-3 and 20% doping efficiency with a TD/TP combination of 600 degrees C/1100 degrees C. By tuning the Cd/Sb flux ratio during CdSeTe:Sb deposition, the lowest defect concentration is achieved at Cd/Sb of 1.4:1, which produced the best VOC CdSeTe:Sb cell. This demonstrates a path to produce high net carrier concentration polycrystalline CdTe thin film with a low concentration of dopant-induced defects.

14 SOLAR ENERGY↗

Optimal Design of Sustainable Ammonia-Based Food–Energy–Water Systems with Nitrogen Management

As the basis for virtually any form of nitrogen fertilizers, ammonia plays a vital role in agriculture; in addition, there has been an increased interest in its use as a carbon-free energy carrier. However, ammonia is also associated with two major environmental concerns: CO 2 emissions from the conventional production process and nitrogen pollution from the excessive use of ammonia-based fertilizers. To mitigate these environmental impacts, we develop an optimization framework for the design of a sustainable ammonia-based agricultural system that synergistically integrates the production of ammonia from renewable resources and effective measures for nitrogen management. The proposed model captures the effect of intermittency by incorporating both design and detailed operational decisions. Here, by applying a multiscale time representation that reduces the problem size and a tailored surrogate model that accurately approximates model nonlinearity, we are able to achieve optimal solutions within reasonable computation times. A computational case study is conducted using real-world data from a local farm in Morris, Minnesota, and the results indicate the trade-off between cost and nitrogen loss. Importantly, we show that practicing effective nitrogen management can significantly reduce the nitrogen loss with only a small increase in net present cost.

10 SYNTHETIC FUELS↗

Moisture-Induced Crystallographic Reorientations and Effects on Charge Carrier Extraction in Metal Halide Perovskite Solar Cells

Lead halide perovskites (LHPs) are promising semiconductors for optoelectronic applications. In LHP solar cells, the focus thus far has been mainly on compositional optimization of the MHP layer, without much understanding of the effects of compositional mixing on structure and texture. This is a serious gap in our knowledge because research has shown that texture underlies the mechanisms of charge carrier and ionic transport. Therefore, it is essential to understand the mechanisms that drive changes in texture in LHPs. Here we examine the effect of moisture and composition on the structure and texture of LHPs and their impacts on optoelectronic properties. Exposure to moisture is shown to induce a crystallographic reorientation in the polycrystalline films, which is also dependent on the amount of organic cation material present at the surface. For films with an excess of organic halide, moisture was shown to induce texture in the (001) plane contributing to the enhancement of photocurrents and long-term device stability. This work shows the importance of texture for the electronic properties of LHPs with a special emphasis on charge carrier extraction in optoelectronic devices.

36 MATERIALS SCIENCE↗

Fe 1+ y Te x Se1- x : A Delicate and Tunable Majorana Material

Here, we report the observation for the p z electron band and the band inversion in Fe 1 + y Te x Se 1–x with angle-resolved photoemission spectroscopy. Furthermore, we found that excess Fe (y > 0) inhibits the topological band inversion in Fe 1 + y Te x Se 1 – x , which explains the absence of Majorana zero modes in previous reports for Fe 1+y Te x Se 1 – x with excess Fe. Based on our analysis of different amounts of Te doping and excess Fe, we propose a delicate topological phase in this material. Thanks to this delicate phase, one may be able to tune the topological transition via applying lattice strain or carrier doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Wide Dynamic Range, 10 kHz Framing Detector for 4D-STEM

Hybrid pixel array detectors (PADs) have expanded the fidelity, frame rate and dynamic range for diffractive imaging in electron microscopes. With their high detective quantum efficiencies (DQE), the noise performance limited is by counting statistics. Consequently, improving the precision and quality of high-speed images requires increasing the linear dynamic range and the maximum usable beam current. Here we describe a new prototype hybrid PAD, our next-generation electron microscope pixel array detector (NG-EMPAD) that expands both the framing speed and dynamic range of our earlier EMPAD design. Like the EMPAD, electrons are detected directly in a 500 μm thick silicon sensor bonded pixel-by-pixel to a custom signal processing integrated circuit (IC). Each pixel in the IC integrates charge carriers produced by the high-energy incident electrons. Here, in-pixel circuitry uses a combination of techniques to extend the dynamic range, including adaptive gain switching and the quantitative excess charge dumping similar to the EMPAD. In-pixel buffering of signals during readout allows acquiring a new image while reading out the previously collected image, yielding an image collection duty cycle of nearly 100%.

36 MATERIALS SCIENCE↗

An in-situ view cell system for investigating swelling behavior of elastomers upon high-pressure hydrogen exposure

The transition to hydrogen as a clean and efficient energy carrier is impeded by challenges in the compatibility of hydrogen with materials used within hydrogen infrastructure. Elastomers, crucial in sealing components, often exhibit premature failures in high-pressure hydrogen environments due to excessive swelling. This study employs an innovative in-situ view cell system to assess the swelling behavior of hydrogenated nitrile butadiene rubber (HNBR) under various hydrogen conditions. The system, designed to withstand pressures up to 96.5 MPa, incorporates Digital Image Correlation (DIC) for strain measurements and volume estimation. Results reveal non-linear volume increases during depressurization, challenging conventional assumptions. Furthermore, investigations into peak hydrogen pressures and pressure-holding scenarios during decompression highlight complex swelling trends. The introduction of a novel computer vision (CV) method enhances precision in volume estimation, overcoming DIC limitations. The study provides insights into mitigating elastomer swelling, crucial for developing robust materials to support future hydrogen-driven energy systems.

Elastomer↗

Arsenic activation and compensation in single crystal CdTe bilayers

In state-of-the art polycrystalline CdTe photovoltaics, group-V dopant activation is about 2%. Low activation can create electronic defects and lead to recombination and band tail losses. To develop methods to overcome this limitation, dopant activation was systematically investigated using molecular beam epitaxy (MBE) grown single crystal bilayers of As-doped CdTe on undoped CdTe. Results suggest multiple paths for improved As-activation in polycrystalline CdTe-based devices. It was found that the carrier concentration in this MBE material saturated at ∼3 × 1016 cm−3, with high levels (>50%) of As-activation possible. High activation could be achieved with a post-growth activation temperature of ∼450 °C, when the initial doping level was below the saturation level. However, at typical polycrystalline As incorporation levels (>5 × 1016 cm−3), the excess As is inactive or compensating, requiring elevated temperatures (500–600 °C) to achieve high activation. Oxygen in the annealing ambient was detrimental, while the effect of CdCl2 in the ambient is more case-dependent. A 575 °C activation anneal was combined with a 450 °C CdCl2 treatment to better understand the implications for polycrystalline CdTe. Interestingly, on highly doped samples, processes ending with a high temperature step displayed high activation, while those ending at 450 °C significantly reduced the carrier concentration (with or without CdCl2 in the ambient). Low activation can be restored with another high temperature anneal, allowing reproducible toggling between high and low activation based on the final temperature. Photoluminescence revealed the presence of donor–acceptor pairs in the low activation state that appear to be associated with a compensating defect.

14 SOLAR ENERGY↗

Technology in Focus: Power-to-X

Power-to-X is the process that converts electricity into energy carriers that can be used in industries and applications not connected to the electricity grid. By creating a product with direct process connected generation, contracted generation, or grid-delivered electricity that is in excess of current demand, production of electricity can be managed to time arbitrage energy and mitigate generation curtailment or inefficient operational reductions. In addition, creating a product potentially develops a secondary revenue stream that aids economics of the facility. This document is a high-level factsheet that provides an overview of what Power-to-X is and what it means.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Influence of Hydrogen and Oxygen on the Structure and Properties of Sputtered Magnesium Zirconium Oxynitride Thin Films

Nitride materials with mixed ionic and covalent bonding character and resulting good charge transport properties are attractive for optoelectronic devices. Recently, Mg-based ternary nitride materials were found to have large dielectric constants and high absorption coefficients with bandgaps appropriate for photovoltaic applications. However, their degenerate carrier concentrations still hinder their possible applications in solar cells and related optoelectronic devices. Therefore, further understanding and engineering of the parameters controlling the material properties of these ternary nitrides is highly desirable. In this paper we report that the structural, optical and electrical properties of magnesium zirconium oxynitride (MZNO) thin films synthesized by combinatorial sputtering with a wide range of cation compositions can be affected by incorporation of oxygen and hydrogen. Excess oxygen improved the crystallinity of MZNO thin films whereas hydrogen attracted oxygen and formed Mg-rich oxide layers at the grain boundaries which in turn reduced the conductivity. On the other hand, optical properties are more sensitive to the composition – both cation and anion ratios – rather than the presence of hydrogen. Compared to cation-stoichiometric MZNO (10 19 –10 20 cm -3 ), substantial reduction of carrier concentration down to ~10 14 cm -3 was achieved under Mg-rich conditions by supplying hydrogen during growth. Photoluminescence measurements showed that the films prepared with hydrogen were optoelectronically active. Overall, this study demonstrates that the material properties of MZN thin films can be significantly influenced by incorporation of oxygen and hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Metal–Halide Perovskite Photovoltaic Cells Deposited via Vapor Transport Deposition

Photovoltaic cells based on metal-halide perovskites have exceeded the performance of other thin film technologies and rival the performance of devices based on archetypical silicon. Attractively, the perovskite active layer can be processed via a variety of solution- and vapor-based methods. Herein, emphasis is on the use of vapor transport codeposition (VTD) to process efficient n–i–p photovoltaic cells based on methylammonium lead iodide (MAPbI 3 ). VTD utilizes a hot-walled reactor operated under moderate vacuum in the range of 0.5–10 Torr. The organic and metal-halide precursors are heated with the resulting vapor transported by a N 2 carrier gas to a cooled substrate where they condense and react to form a perovskite film. The efficiency of photovoltaic devices based on VTD-processed MAPbI 3 is found to be highest in films with excess lead iodide content, with champion devices realizing exceeding 12%.

14 SOLAR ENERGY↗

Hot-carrier dynamics in InAs/AlAsSb multiple-quantum wells

A type-II InAs/AlAs 0.16 Sb 0.84 multiple-quantum well sample is investigated for the photoexcited carrier dynamics as a function of excitation photon energy and lattice temperature. Time-resolved measurements are performed using a near-infrared pump pulse, with photon energies near to and above the band gap, probed with a terahertz probe pulse. The transient terahertz absorption is characterized by a multi-rise, multi-decay function that captures long-lived decay times and a metastable state for an excess-photon energy of >100 meV. For sufficient excess-photon energy, excitation of the metastable state is followed by a transition to the long-lived states. Excitation dependence of the long-lived states map onto a nearly-direct band gap (E g ) density of states with an Urbach tail below E g . As temperature increases, the long-lived decay times increase < E g , due to the increased phonon interaction of the unintentional defect states, and by phonon stabilization of the hot carriers > E g . Additionally, Auger (and/or trap-assisted Auger) scattering above the onset of the plateau may also contribute to longer hot-carrier lifetimes. Meanwhile, the initial decay component shows strong dependence on excitation energy and temperature, reflecting the complicated initial transfer of energy between valence-band and defect states, indicating methods to further prolong hot carriers for technological applications.

14 SOLAR ENERGY↗