Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “error field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reconstruction of plasma equilibrium and eddy current induced error fields in the Lithium Tokamak eXperiment-β (Final Report)

This is the final report for the DOE award DE-SC0019239, titled “Reconstruction of plasma equilibrium and eddy current induced error fields in the Lithium Tokamak eXperiment-b” for the period July 1, 2018 – July 2, 2023. This award supported research into computational models for plasma equilibrium and 3D conducting structures in the Lithium Tokamak eXperiment-b (LTX-b) using the PSI-Tri/TokaMaker and PSI-Tet codes. Additional detail on progress in support of these tasks is provided below.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

Real frequency tearing layers with parallel dynamics and the effect on error field locking and resistive wall modes

The response to tearing perturbations of a resonant layer within a toroidal plasma often includes real frequencies. These real frequencies are of importance not only for the stability of the tearing mode but also for determining the response to an error field, including locking torques, and the stability properties when interacting with a resistive wall. Unfortunately, including the physics which drives these frequencies can make the model highly complicated and mask the root physics mechanisms driving the response, making it difficult to draw connections between the physics mechanisms occurring in different regimes. Here, we present a simple and intuitive method to derive the tearing mode layer properties in various regimes of resistive MHD with the key physics effects of pressure gradient, toroidal field line curvature and parallel dynamics, focusing on two important regimes: The resistive-inertial (RI) and the viscoresistive (VR) regimes. The usual Glasser effect, a toroidal effect which involves real frequencies, has been discussed only in the context of the RI regime. We find that it occurs in the VR regime as well. Based on these results and the presence of real frequencies in many other tearing regimes, we reach the conclusion that real frequencies in tearing modes are the rule rather than the exception. We also find that the existence of tearing modes with real frequencies in the VR and RI regimes is related to nearby electrostatic resistive interchange modes, themselves with real frequencies. Another important effect we find is that the threshold for the destabilization of resistive wall tearing modes is significantly lowered by plasma rotation in the presence of real frequency layers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Nonlinear error field response in the presence of plasma rotation and real frequencies due to favorable curvature

This works describes the interaction of an phenomenon known to arise in tokamak fusion experiments with the magnetic perturbations that can arise at the edge of such experiments. We present nonlinear NIMROD resistive MHD simulations of the response of a rotating plasma to an error field when the plasma has weakly damped linear tearing modes (TMs), stabilized by a pressure gradient and favorable curvature. The favorable curvature leads to the Glasser effect: the occurrence of real frequencies and stabilization with positive stability index Δ'.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Gravity field error analysis: Applications of GPS receivers and gradiometers on low orbiting platforms

The concept of a Global Positioning System (GPS) receiver as a tracking facility and a gradiometer as a separate instrument on a low orbiting platform offers a unique tool to map the Earth's gravitational field with unprecedented accuracies. The former technique allows determination of the spacecraft's ephemeris at any epoch to within 3 to 10 cm, the latter permits the measurement of the tensor of second order derivatives of the gravity field to within 0.01 to 0.0001 Eotvos units depending on the type of gradiometer. First, a variety of error sources in gradiometry where emphasis is placed on the rotational problem pursuing as well a static as a dynamic approach is described. Next, an analytical technique is described and applied for an error analysis of gravity field parameters from gradiometer and GPS observation types. Results are discussed for various configurations proposed on Topex/Poseidon, Gravity Probe-B, and Aristoteles, indicating that GPS only solutions may be computed up to degree and order 35, 55, and 85 respectively, whereas a combined GPS/gradiometer experiment on Aristoteles may result in an acceptable solution up to degree and order 240.

Schrama, E.↗
NASA NTRS1991

Gravity field error analysis - Applications of Global Positioning System receivers and gradiometers on low orbiting platforms

The concept of a Global Positioning System (GPS) receiver as a tracking facility and a gradiometer as a separate instrument on a low-orbiting platform offers a unique tool to map the earth's gravitational field with unprecedented accuracies. The former technique allows determination of the spacecraft's ephemeris at any epoch to within 3-10 cm, the latter permits the measurement of the tensor of second order derivatives of the gravity field to within 0.01 to 0.0001 Eotvos units depending on the type of gradiometer. First, a variety of error sources in gradiometry where emphasis is placed on the rotational problem pursuing as well a static as a dynamic approach is described. Next, an analytical technique is described and applied for an error analysis of gravity field parameters from gradiometer and GPS observation types. Results are discussed for various configurations proposed on Topex/Poseidon, Gravity Probe-B, and Aristoteles, indicating that GPS only solutions may be computed up to degree and order 35, 55, and 85, respectively, whereas a combined GPS/gradiometer experiment on Aristoteles may result in an acceptable solution up to degree and order 240.

Schrama, Ernst J. O.↗
DOE OSTI2023

A novel scheme for error field correction in permanent magnet stellarators

Stellarators offer a promising path towards fusion reactors, but their design and construction are complicated by stringent tolerance requirements on highly complex 3D coils. A potential way to simplify the engineering requirements for stellarators is to use simple planar toroidal field coils along with permanent magnet arrays to generate shaping fields. In order to ensure sufficient field accuracy while minimizing engineering complexity and system cost, new techniques are required to correct the field produced by the permanent magnet arrays to within requirements set by plasma physics. This work describes a novel correction method developed for this purpose. This analysis is applied to the design of a quasi-axisymmetric stellarator that employs a combination of permanent magnets and planar toroidal field coils to generate its magnetic field. Analysis techniques and initial results using the method for error correction on a proposed permanent magnet stellarator are shown, and it is demonstrated that the method successfully meets the design requirements of the project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1990

Mars gravity field error analysis from simulated radio tracking of Mars Observer

Results are presented on the analysis of the recovery of the Martian gravity field from tracking data in the presence of unmodeled error effects associated with different orbit orientations. The analysis was based on the mission plan for the Mars Observer (MO) radio tracking data from the Deep Space Network. From the analysis, a conservative estimate of the gravitational accuracy for the entire mission could be obtained. The results suggest that, because the atmospheric drag is the dominant error source, the spacecraft orbit could possibly be raised in altitude without a significant loss of gravitational signal. A change in altitude will also alleviate the large effects seen in the spectrum the satellite resonant orders.

Smith, D. E.↗
DOE OSTI2019

Field Quality Measurement of a 4.2-m-Long Prototype Low- $\beta$ Nb $_3$ Sn Quadrupole Magnet During the Assembly Stage for the High-Luminosity LHC Accelerator Upgrade Project

The U.S. High-Luminosity LHC Accelerator Upgrade Project, in collaboration with CERN, is developing Nb 3 Sn quadrupole magnets (MQXFA) to be installed at the interaction region of the LHC. The project will deliver 20 MQXFA magnets in 10 cold masses. These magnets need to meet the stringent requirements on field quality at the nominal operating current. Compared to the mature NbTi accelerator magnet technology, achieving excellent field quality can be challenging for Nb 3 Sn magnets. To help track, understand, and allow effective correction of geometric field errors, field quality measurements at room temperature during the MQXFA assembly stage was planned for the project. The measurements also intend to evaluate the magnetic axis and twist angle along the magnet aperture. We report the first measurement on a prototype MQXFA magnet using a recently developed measurement system. The magnetic axis and twist angle met the acceptance criteria. Further development needs for the room-temperature measurements were discussed. Here, we expect that statistics obtained from such measurements throughout the project will provide insight into future applications of high-performance Nb 3 Sn accelerator magnets.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

Assessing Gaussian Assumption of PMU Measurement Error Using Field Data

Gaussian PMU measurement noise has been assumed for many power system applications, such as state estimation, oscillatory modes monitoring, voltage stability analysis, to cite a few. This letter proposes a simple yet effective approach to validate this assumption by using the stability property of a probability distribution and the concept of redundant measurement. Extensive results using field PMU data from WECC system reveal that the Gaussian assumption is questionable.

Wang, Shaobu (ORCID:0000000236073573)↗
DOE OSTI2022

SPARC 3D Field Physics and Support of the Non-Axisymmetric Coil Assessment

Commonwealth Fusion Systems (CFS) is deploying SPARC, a net-energy tokamak, by 2025. A notable challenge facing all tokamak approaches to fusion energy production is maintaining a stable plasma and thereby steady energy production. “Disruptions” to plasma operation are often encountered in devices when they operate at high normalized pressure, high normalized density, or high normalized current. SPARC is unique in that it is expected to demonstrate Q>=2 in a plasma with low normalized pressure and density, but with a more modest current limit buffer sufficient to avoid disruptions. Due to both the high normalized current and high magnetic field of the SPARC design, it is expected to decrease its relative resilience to instabilities driven by non-axisymmetry in the externally applied magnetic field, termed ‘error fields’. To prevent error field driven instabilities, a primary line of defense is strict engineering tolerances in magnet fabrication and installation. A secondary line of defense is a purpose-built set of magnetic coils to correct these errors, termed error field correction coils (EFCCs). The overarching goals of this INFUSE project were to evaluate the effectiveness of the EFCCs in the SPARC design and provide guidance as to how to improve this effectiveness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Overview of the COMPASS results *

COMPASS addressed several physical processes that may explain the behaviour of important phenomena. This paper presents results related to the main fields of COMPASS research obtained in the recent two years, including studies of turbulence, L–H transition, plasma material interaction, runaway electron, and disruption physics: Tomographic reconstruction of the edge/SOL turbulence observed by a fast visible camera allowed to visualize turbulent structures without perturbing the plasma. Dependence of the power threshold on the X-point height was studied and related role of radial electric field in the edge/SOL plasma was identified. The effect of high-field-side error fields on the L–H transition was investigated in order to assess the influence of the central solenoid misalignment and the possibility to compensate these error fields by low-field-side coils. Results of fast measurements of electron temperature during ELMs show the ELM peak values at the divertor are around 80% of the initial temperature at the pedestal. Liquid metals were used for the first time as plasma facing material in ELMy H-mode in the tokamak divertor. Good power handling capability was observed for heat fluxes up to 12 MW m –2 and no direct droplet ejection was observed. Partial detachment regime was achieved by impurity seeding in the divertor. The evolution of the heat flux footprint at the outer target was studied. Runaway electrons were studied using new unique systems—impact calorimetry, carbon pellet injection technique, wide variety of magnetic perturbations. Radial feedback control was imposed on the beam. Forces during plasma disruptions were monitored by a number of new diagnostics for vacuum vessel (VV) motion in order to contribute to the scaling laws of sideways disruption forces for ITER. Current flows towards the divertor tiles, incl. possible short-circuiting through PFCs, were investigated during the VDE experiments. The results support ATEC model and improve understanding of disruption loads.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗