Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “epitaxial interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Manipulating Spin–Lattice Coupling in Layered Magnetic Topological Insulator Heterostructure via Interface Engineering

Induced magnetic order in a topological insulator (TI) can be realized either by depositing magnetic adatoms on the surface of a TI or engineering the interface with epitaxial thin film or stacked assembly of 2D van der Waals (vdW) materials. Herein, the observation of spin-phonon coupling in the otherwise non-magnetic TI Bi 2 Te 3 is reported, due to the proximity of FePS 3 (an antiferromagnet (AFM), T N ≈ 120 K), in a vdW heterostructure framework. Temperature-dependent Raman spectroscopic studies reveal deviation from the usual phonon anharmonicity originated from spin-lattice coupling at the Bi 2 Te 3 /FePS 3 interface at/below 60 K in the peak position (self-energy) and linewidth (lifetime) of the characteristic phonon modes of Bi 2 Te 3 (106 and 138 cm –1 ) in the stacked heterostructure. The Ginzburg-Landau (GL) formalism, where the respective phonon frequencies of Bi 2 Te 3 couple to phonons of similar frequencies of FePS 3 in the AFM phase, is adopted to understand the origin of the hybrid magneto-elastic modes. At the same time, the reduction of characteristic TN of FePS 3 from 120 K in isolated flakes to 65 K in the heterostructure, possibly due to the interfacial strain, which leads to smaller Fe-S-Fe bond angles as corroborated by computational studies using density functional theory (DFT). Besides, inserting hexagonal boron nitride within Bi 2 Te 3 /FePS 3 stacking regains the anharmonicity in Bi 2 Te 3 . As a result, controlling interfacial spin-phonon coupling in stacked heterostructure can have potential application in surface code spin logic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Interface structures of inclined ZnO thin film on (0 1 1)-MgO substrate with bulk-like optical properties

Combining different phase structure materials with unique properties to design novel devices plays a significant role in the development of modern electronics. Here, we explore the characteristics of this type of complex interface and epitaxy structures based on the coupling between hexagonal ZnO film and cubic MgO substrate. The ZnO film was prepared by the molecular beam epitaxy technique on the MgO (0 1 1) substrate. The analysis results from the in situ reflection high energy electron diffraction patterns, X-ray diffraction (XRD)-pole figures and high resolution transmission electron microscopy images demonstrate that the film exhibits two-fold symmetry domains with a growth direction deviated from c-axis at about 31º along the [0 1 0] MgO or [0 $\bar{1}$ 0] MgO azimuth. Despite the intertwined diffusion from Zn and Mg atoms in the interface, which is the possible origin of a blue shift of about 0.083 eV in the Photoluminescence (PL) spectrum, the inclined film shows a full width at half maximum value that is close to the reported value from the high quality film. Finally, this work hopefully provides useful insights to the design and exploration of the novel optoelectronic devices that involve the integration of materials with different structure and different properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Direct metal contacts printing on 4H-SiC for alpha detectors and inhomogeneous Schottky barriers

Electrical characterization of several 4H-SiC Schottky diodes with Aerosol-Jet printed gold (Au), silver (Ag), and platinum (Pt) contacts was performed using forward and reverse current–voltage (IV) measurements. From these measurements, device parameters such as Schottky barrier height and ideality factor were determined; however, many of the devices exhibited nonideal behavior and inferior performance characterized by ideality factors significantly greater than one, disproportionate low voltage leakage current and low barrier heights. Forward current–voltage (FIV) characteristics were fitted to an inhomogeneous barrier height theory to explain the abnormal behavior exhibited by the printed devices. Here, transmission electron microscopy (TEM) of the device cross-sections was performed to investigate the printed metal and semiconductor epitaxial layer interface, which revealed the imperfections in the metal–semiconductor contact. Despite these irregularities, alpha radiation detection capability of these devices was still achieved with an energy resolution of 1.89% at 5.486 MeV, and the best achievable resolution at 0.51% with no energy degradation of 5.486 MeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Surface stability of SrNbO 3+δ grown by hybrid molecular beam epitaxy

4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO 3 is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d 1 Nb 4+ cation and the limitations in the delivery of refractory Nb. To date, films have been grown primarily by pulsed laser deposition (PLD), but development of a means to grow and stabilize the material via molecular beam epitaxy (MBE) would enable studies of interfacial phenomena and multilayer structures that may be challenging by PLD. To that end, SrNbO 3 thin films were grown using hybrid MBE for the first time using a tris(diethylamido)(tert-butylimido) niobium precursor for Nb and an elemental Sr source on GdScO 3 substrates. Varying thicknesses of insulating SrHfO 3 capping layers were deposited using a hafnium tert-butoxide precursor for Hf on top of SrNbO 3 films to preserve the metastable surface. Grown films were transferred in vacuo for x-ray photoelectron spectroscopy to quantify elemental composition, density of states at the Fermi energy, and Nb oxidation state. Ex situ studies by x-ray absorption near edge spectroscopy and scanning transmission electron microscopy illustrate that the SrHfO 3 capping plays an important role in preserving the crystalline quality of the material and the Nb 4d 1 metastable charge state under atmospheric conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Formation of tubular conduction channel in a SiGe(P)/Si core/shell nanowire heterostructure

Realizing a tubular conduction channel within a one-dimensional core–shell nanowire (NW) enables better understanding of quantum phenomena and exploration of electronic device applications. Herein, we report the growth of a SiGe(P)/Si core/shell NW heterostructure using a chemical vapor deposition coupled with vapor–liquid–solid growth mechanism. The entire NW heterostructure behaves as a p-type semiconductor, which demonstrates that the high-density carriers are confined within the 4 nm-thick Si shell and form a tubular conduction channel. These findings are confirmed by both calculations and the gate-dependent current–voltage ( I d – V g ) characteristics. Atomic resolution microscopic analyses suggest a coherent epitaxial core/shell interface where strain is released by forming dislocations along the axial direction of the NW heterostructure. Additional surface passivation achieved via growing a SiGe(P)/Si/SiGe core/multishell NW heterostructure suggests potential strategies to enhance the tubular carrier density, which could be further modified by improving multishell crystallinity and structural design.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of capping layers on the near-surface region of SrVO 3 films

Surfaces of correlated-electron oxides are of significant interest both from fundamental and applied perspectives. Many such oxides feature a near-surface region (NSR) which differs from the bulk’s properties. The NSR can significantly affect the interpretation of the material’s electronic structure, especially for those in thin film form, and have detrimental effects for applications such as field effect devices and catalysts. In this work we study the changes in the composition and electronic structure of the NSR of SrVO 3 (SVO) thin films. We employ x-ray photoelectron spectroscopy (XPS) and compare TiOx-capped SVO films to identical uncapped films that were exposed to ambient conditions. The significant over-oxidation of the SVO surface in the bare film, illustrated by a primary V 5+ component, is prevented by the TiO x layer in the capped film. Furthermore, the capped film further exhibits a decrease in Sr surface phases. These results demonstrate the importance and potential of such capping layers in preserving the bulk properties of correlated oxides in their NSR, enabling more accurate probes for their underlying physics and offering a route for their integration into devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multiplication of Freestanding Compound Semiconductor Membranes from a Single Wafer by Alternating Growth with 2D Materials

Single-crystal compound semiconductors, such as III-N and III-V, are important building blocks for functional devices due to their high electron mobilities, wide range of bandgaps, and excellent optoelectronic properties. However, current methods to produce their freestanding membranes for heterointegration suffer from slow processes or poor material quality. Here, we demonstrate an approach to grow and harvest multiple wafer-scale single-crystal membranes with high throughput by introducing weak van der Waals interfaces between epitaxial layers. This is achieved by directly growing two-dimensional (2D) materials on compound semiconductors in their native deposition systems, which enables alternating growth of 2D material and compound semiconductor epitaxial layers in a single run. Each epilayer in the multi-stack structure is then sequentially harvested by mechanical exfoliation, producing multiple freestanding single-crystal membranes with extremely high throughput from a single wafer, primed for integration in mixed-dimensional heterostructures.

Han, Ne Myo↗
DOE OSTI2022

Multiplication of Freestanding Compound Semiconductor Membranes from a Single Wafer by Alternating Growth with 2D Materials

Single-crystal compound semiconductors, such as III-N and III-V, are important building blocks for functional devices due to their high electron mobilities, wide range of bandgaps, and excellent optoelectronic properties. However, current methods to produce their freestanding membranes for heterointegration suffer from slow processes or poor material quality. Here, we demonstrate an approach to grow and harvest multiple wafer-scale single-crystal membranes with high throughput by introducing weak van der Waals interfaces between epitaxial layers. This is achieved by directly growing two-dimensional (2D) materials on compound semiconductors in their native deposition systems, which enables alternating growth of 2D material and compound semiconductor epitaxial layers in a single run. Each epilayer in the multi-stack structure is then sequentially harvested by mechanical exfoliation, producing multiple freestanding single-crystal membranes with extremely high throughput from a single wafer, primed for integration in mixed-dimensional heterostructures.

Han, Ne Myo↗
DOE OSTI2021

On the Development of Order and Interfaces during the Growth of Ultrathin La 2 CuO 4 Films by Molecular Beam Epitaxy

While the atomic structure of interfaces in complex oxide heterostructures created by epitaxial growth has been investigated extensively, few studies have been conducted on how interfaces form and restructure at the initial stage of film growth. The dynamic aspects of the growth behavior can strongly influence the final interfacial atomic structure, which may lead to the emergence of interface-specific properties, such as the rise of interfacial superconductivity between certain Ruddlesden-Popper oxide materials. In this report, the structural development of La2CuO 4 thin films grown by molecular beam epitaxy on a LaSrAlO 4 substrate is investigated by X-ray diffraction measurements with rapid scans over a volume of reciprocal space. This method provides far more detailed information on interface formation than traditional fixed-point measurements. The results show that the atomic structure of the interface becomes fully established after just a single unit cell of growth. Interestingly, restructuring continues to occur within the topmost half to one unit cell of the film during the deposition process. However, diffraction intensity oscillations from both reflection high-energy electron and X-ray measurements stabilize only after the growth of two unit cells, indicating that the growth front morphology continues to evolve until the start of the third unit cell. This multimodal investigation provides insights into the atomic processes taking place during layered oxide interface formation, including the dynamical rearrangement of LaO and CuO 2 layers. Such information is not only relevant to the engineering and optimization of functional layer structures but can also be critical for ultrathin films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Polarization-Controlled Structural Modulation in the Single Atomic Layer at the PbZr 0.2 Ti 0.8 O 3 /LaNiO 3 Interface

Conductivity modulation via ferroelectric polarization coupling with LaNiO 3 (LNO) is demonstrated at an epitaxial ferroelectric–LNO interface. Conductivity measurements, varying the thickness of the LNO channel, show that this phenomenon is confined to a few atomic layers at the interface. Combining in situ biasing and off-axis holography, we mapped out electrostatic potentials at the PbZr 0.2 Ti 0.8 O 3 (PZT)/LNO/SrTiO 3 (STO) heterostructure upon polarization switching. Using aberration-corrected STEM, the interfacial atomic structures were investigated for the two different PZT polarization states. Polarization in PZT induces a significant change in the in-plane O–Ni–O bond angles, with a 37° modulation in the topmost 1 or 2 LNO unit cells, driven by strain in the oxygen sublattice for the two opposite polarization directions in PZT. Both oxygen and cation sublattices exhibit strain responses exceeding 10% upon switching. This atomic-layer structural modulation highlights a mechanism for functional oxide heterostructure development, offering pathways for advancements in nonvolatile memory, sensors, and energy-efficient transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Subsurface Interface Structure Controlling Local Electronic Properties of Epitaxial Graphene on SiC(0001)

Recently realized high-mobility semiconducting epitaxial graphene on silicon carbide (SiC) [Zhao, J. Nature 2024, 625 (7993), 60−65, 10.1038/s41586-023-06811-0] provided an important step toward integration of the graphene-based system into active components in postsilicon micro- and nanoelectronics. However, the exact atomic-scale structure and complex bonding configurations of the first epitaxial graphene carbon layer (C buffer ) remain an open problem. Our recent report [Kolmer, M. Communications Physics 2024, 7 (1), 16, 10.1038/s42005-023-01515-3] has shed new light on understanding this interface, where the external transverse electric field-dependent dynamic switching behavior of the C buffer –SiC bonds was observed. Here, using scanning tunneling microscopy and spectroscopy (STM and STS), we present direct evidence of silicon (Si) vacancies at the interface and provide their distribution at the topmost reconstructed SiC(0001) layer. Bias voltage and epitaxial graphene thickness-dependent characterization of the collective C buffer –SiC interface showed that “Si” vacancy sites beneath C buffer are stable under STM electric fields. Moreover, the vacancies introduce localized electronic states below the Fermi level, thereby enhancing the charge-transfer phenomenon across the interface.

Thupakula, Umamahesh [Ames Laboratory (AMES), Ames↗
DOE OSTI2025

Data for: Subsurface Interface Structure Controlling Local Electronic Properties of Epitaxial Graphene on SiC(0001)

Recently realized high-mobility semiconducting epitaxial graphene on silicon carbide, provided an important step towards integration of the graphene-based system into active components in post-silicon micro- and nano-electronics. However, the exact atomic-scale structure and the complex bonding configurations of the first epitaxial graphene carbon layer remain an open problem. Our recent report has shed new light on understanding this interface, where the external transverse electric field-dependent dynamic switching behavior of the Cbuffer-SiC bonds was observed. Here, using scanning tunneling microscopy and spectroscopy (STM and STS), we present the direct evidence of silicon (Si) vacancies at the interface and provide their distribution at the topmost reconstructed SiC(0001) layer. Experimental STM and density functional theory modeling data were used in the preparation of figures in a published article in the Journal of Physical Chemistry Letters. Files related to the figures and supplementary materials in the article are present in this dataset in .txt format.

Condensed matter imaging↗
DOE OSTI2025

Data for: Subsurface Interface Structure Controlling Local Electronic Properties of Epitaxial Graphene on SiC(0001)

Recently realized high-mobility semiconducting epitaxial graphene on silicon carbide, provided an important step towards integration of the graphene-based system into active components in post-silicon micro- and nano-electronics. However, the exact atomic-scale structure and the complex bonding configurations of the first epitaxial graphene carbon layer remain an open problem. Our recent report has shed new light on understanding this interface, where the external transverse electric field-dependent dynamic switching behavior of the Cbuffer-SiC bonds was observed. Here, using scanning tunneling microscopy and spectroscopy (STM and STS), we present the direct evidence of silicon (Si) vacancies at the interface and provide their distribution at the topmost reconstructed SiC(0001) layer. Experimental STM and density functional theory modeling data were used in the preparation of figures in a published article in the Journal of Physical Chemistry Letters. Files related to the figures and supplementary materials in the article are present in this dataset in .txt format.

Condensed matter imaging↗
DOE OSTI2022

Electronic Structure and Epitaxy of CdTe Shells on InSb Nanowires

Abstract Indium antimonide (InSb) nanowires are used as building blocks for quantum devices because of their unique properties, that is, strong spin‐orbit interaction and large Landé g‐factor. Integrating InSb nanowires with other materials could potentially unfold novel devices with distinctive functionality. A prominent example is the combination of InSb nanowires with superconductors for the emerging topological particles research. Here, the combination of the II–VI cadmium telluride (CdTe) with the III–V InSb in the form of core–shell (InSb–CdTe) nanowires is investigated and potential applications based on the electronic structure of the InSb–CdTe interface and the epitaxy of CdTe on the InSb nanowires are explored. The electronic structure of the InSb–CdTe interface using density functional theory is determined and a type‐I band alignment is extracted with a small conduction band offset ( ⩽0.3 eV). These results indicate the potential application of these shells for surface passivation or as tunnel barriers in combination with superconductors. In terms of structural quality, it is demonstrated that the lattice‐matched CdTe can be grown epitaxially on the InSb nanowires without interfacial strain or defects. These shells do not introduce disorder to the InSb nanowires as indicated by the comparable field‐effect mobility measured for both uncapped and CdTe‐capped nanowires.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Atomically thin half-van der Waals metals enabled by confinement heteroepitaxy

Atomically thin two-dimensional (2D) metals may be key ingredients in next-generation quantum and optoelectronic devices. However, 2D metals must be stabilized against environmental degradation and integrated into heterostructure devices at the wafer scale. The high-energy interface between silicon carbide and epitaxial graphene provides an intriguing framework for stabilizing a diverse range of 2D metals. In this paper we demonstrate large-area, environmentally stable, single-crystal 2D gallium, indium and tin that are stabilized at the interface of epitaxial graphene and silicon carbide. The 2D metals are covalently bonded to SiC below but present a non-bonded interface to the graphene overlayer; that is, they are ‘half van der Waals’ metals with strong internal gradients in bonding character. These non-centrosymmetric 2D metals offer compelling opportunities for superconducting devices, topological phenomena and advanced optoelectronic properties. For example, the reported 2D Ga is a superconductor that combines six strongly coupled Ga-derived electron pockets with a large nearly free-electron Fermi surface that closely approaches the Dirac points of the graphene overlayer.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chemical substitution induced half-metallicity in CrMnSb (1– x ) P x

Half-metallic Heusler alloys have been intensively studied in recent years due to their potential applications in spin-based devices, e.g., in magnetic tunnel junctions. Yet, their properties may be very sensitive to the choice of the substrates, i.e., to the epitaxial strain and interface properties. Here, we report the results of our computational work on the half-Heusler compound CrMnSb (1–x) P x . In particular, we demonstrate that the parent compound CrMnSb is close to a half-metallic material at the optimized lattice parameter, with the onset of the half-metallic bandgap a few meV above the Fermi energy. Moreover, although it undergoes a half-metallic transition under a uniform compression of ~1.5%, such a transition is absent under epitaxial strain. At the same time, we show that a half-metallic transition could be induced by a chemical substitution of Sb with P, which results in a volume reduction of the unit cell. In particular, 50% substitution of Sb with P leads to a robust half-metallicity in CrMnSb (1–x) P x , with 100% spin polarization being retained at a large range of epitaxial strain. Furthermore, our results indicate that CrMnSb0.5P0.5 could be grown on different types of substrates, e.g., GaAs, without its electronic properties being detrimentally affected by biaxial strain. In addition, CrMnSb 0.5 P 0.5 exhibits a fully compensated ferrimagnetic alignment, which could be potentially useful in applications where stray magnetic fields are undesirable.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Epitaxial heterointerfacial electron bridge synchronizes oxygen evolution activity and stability on a layered double hydroxide surface

Scalable green hydrogen production via electrocatalytic water splitting is largely restricted by the insufficient activity and stability of oxygen evolution reaction (OER) catalysts at the anode. As a class of the most active OER catalysts in alkaline electrolyzers, the application of layered double hydroxides (LDHs) remains a main challenge owing to the unstable lattice oxygen dissolution due to the dominant lattice oxygen-involving OER mechanism during long-term operation. Herein, we found that using an epitaxial hetero-interfacing nickel hydroxide (namely Ni(OH) 2 ) as an electron bridge between an active FeCo LDH and Ni foam support to form an LDH*/NFO catalyst, the electronic storage capacity around the Fermi level (-0.5 to +0.5 eV, e-D FE ) sharply increases from 0.93 per cell to 1.51 per cell. Subsequently, we demonstrate that this high e-D FE enables ceaseless and fast power injection into the kinetic process of intermediate species conversion and inhibits lattice oxygen dissolution in the active FeCo LDH. Consequently, it demonstrated a low OER overpotential of 246 mV at a current density of 100 mA cm -2 and ultrahigh stability for up to 3500 hours with an ultraslow overpotential increase rate of 9.4 × 10 -3 mV h -1 . Therefore, we developed an epitaxial hetero-interfacial electron bridging strategy to synchronize the activity and stability of available catalysts for scalable green hydrogen production via electrocatalytic water splitting.

25 ENERGY STORAGE↗
DOE OSTI2024

The Role of Interfacial Interactions and Oxygen Vacancies in Tuning Magnetic Anisotropy in LaCrO 3 /LaMnO 3 Heterostructures

The interplay of lattice, electronic, and spin degrees of freedom at epitaxial complex oxide interfaces provides a route to tune their magnetic ground states. Unraveling the competing contributions is critical for tuning their functional properties. The relationship between magnetic ordering and magnetic anisotropy and the lattice symmetry, oxygen content, and film thickness in compressively strained LaMnO 3 (LMO)/LaCrO 3 (LCO) superlattices is investigated. Mn–O–Cr antiferromagnetic superexchange interactions across the heterointerface result in a net ferrimagnetic magnetic structure. Bulk magnetometry measurements reveal isotropic in-plane magnetism for as-grown oxygen-deficient thin samples due to equal fractions of orthorhombic a+a-c-, and a-a+c- twin domains. As the superlattice thickness is increased, in-plane magnetic anisotropy emerges as the fraction of the a+a-c- domain increases. On annealing in oxygen, the suppression of oxygen vacancies results in a contraction of the lattice volume, and an orthorhombic to rhombohedral transition leads to isotropic magnetism independent of the film thickness. The complex interactions are investigated using high-resolution synchrotron diffraction and X-ray absorption spectroscopy. These results highlight the role of the evolution of structural domains with film thickness, interfacial spin interactions, and oxygen-vacancy-induced structural phase transitions in tuning the magnetic properties of complex oxide heterostructures.

36 MATERIALS SCIENCE↗