Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrostatic dissipative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Producing entangled photon pairs and quantum squeezed states in plasmas

Plasma is capable of mediating the conversion of two pump photons into two different photons through a relativistic four-wave mixing nonlinearity. Spontaneously created photon pairs are emitted at symmetric angles with respect to the colinear pump direction, and the emission rate is largest if they have identical frequency. Thus, two orthogonally polarized pumps can produce polarization-entangled photon pairs through a millimeter-long homogeneous plasma. Here, the noise from Raman scattering can be avoided if the pump detuning differs from twice the plasma frequency. However, pump detuning exactly equal to twice the plasma frequency can significantly enhance the interaction rate, which allows for the production of strong two-mode squeezed states. Remarkably, the amplified noise from Raman scattering are correlated and hence can be suppressed in one of the output quadratures, thereby maintaining the squeezing magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2018

Electrostatic Discharges from Conductive Thermal Coatings

Selecting the correct thermal control coating for a spacecraft can be a significant challenge. From the start, the process includes balancing conflicting needs. Thermal control paints must have the ability to either absorb or emit heat as desired and this property cannot change beyond a set point over the life of the mission. When the mission involves operating in a heavy charging environment, the control coating must be static dissipative enough to bleed away absorbed energetic electrons to minimize induced electric fields and the risk of electrostatic discharges. Finding the right balance of thermal performance and electrical performance can be difficult for spacecraft designers. In an effort to aid in spacecraft design, a number of white and black thermal control coatings were tested at the Jet Propulsion Laboratory using a two-part test campaign. These tests involved an initial screening test to determine the bulk resistivity of the material using a traditional parallel plate test, but placed in a vacuum chamber immersed in a bath of liquid nitrogen to obtain data over a range of temperatures. The most promising materials were then exposed to a stream of energetic electrons and monitored for the production of electrostatic discharges. Results from these tests indicated that only a few of the common thermal control coatings have a resistivity below 109 ohm-cm as suggested in NASA-HDBK-4002A. Of those that meet this criterion, most will still produce electrostatic discharges when exposed to electrons with energies from 20keV to 60keV while held at cryogenic temperatures. Additional testing is required to characterize additional coatings to create a database that designers may use when selecting an appropriate coating for their application.

Chinn, James↗
DOE OSTI2024

Entanglement of excitons by acoustic guiding

A system is described that exhibits the functionality of a beam-splitter, typically an optical device that splits a beam of light in two. In this case, the beams are acoustic pulses and can lead to the creation of a Wannier-Mott exciton: a bound state of an electron and an electron hole whose attraction to each other is maintained by the electrostatic Coulomb force. This exciton beam-splitter is lossy (i.e., involves the dissipation of electrical or electromagnetic energy). Half of the time the exciton is radiated away. Nevertheless, if the exciton is not lost, the exciton is now in a superposition of two states that can be well separated in position. Four such beam-splitters can be used to make an exciton interferometer that uses the interference patterns from the interacting acoustic pulses to extract information.

Yurke, Bernard↗
NASA NTRS2015

Electrostatic Model Applied to ISS Charged Water Droplet Experiment

The electrostatic force can be used to create novel relative motion between charged bodies if it can be isolated from the stronger gravitational and dissipative forces. Recently, Coulomb orbital motion was demonstrated on the International Space Station by releasing charged water droplets in the vicinity of a charged knitting needle. In this investigation, the Multi-Sphere Method, an electrostatic model developed to study active spacecraft position control by Coulomb charging, is used to simulate the complex orbital motion of the droplets. When atmospheric drag is introduced, the simulated motion closely mimics that seen in the video footage of the experiment. The electrostatic force's inverse dependency on separation distance near the center of the needle lends itself to analytic predictions of the radial motion.

Stevenson, Daan↗
NASA NTRS1982

Ion distribution effects of turbulence on a kinetic auroral arc model

An inverted-V auroral arc structure plasma-kinetic model is extended to phenomenologically include the effects of electrostatic turbulence, with k-parallel/k-perpendicular being much less than unity. It is shown that, unless plasma sheet ions are very much more energetic than the electrons, anomalous resistivity is not a large contributor to parallel electrostatic potential drops, since the support of the observed potential drop requires a greater dissipation of energy than can be provided by the plasma sheet. Wave turbulence can, however, be present, with the ion cyclotron turbulence levels suggested by the ion resonance broadening saturation mechanism of Dum and Dupree (1970) being comparable to those observed on auroral field lines. The diffusion coefficient and net growth rate are much smaller than estimates based solely on local plasma properties.

Cornwall, J. M.↗
NASA NTRS1990

A self-consistent two-dimensional resistive fluid theory of field-aligned potential structures including charge separation and magnetic and velocity shear

A self-consistent two-fluid theory that includes the magnetic field and shear patterns is developed to model stationary electrostatic structures with field-aligned potential drops. Shear flow is also included in the theory since this seems to be a prominent feature of the structures of interest. In addition, Ohmic dissipation, a Hall term, and pressure gradients in a generalized Ohm's law, modified for cases without quasi-neutrality, are included. In the analytic theory, the electrostatic force is balanced by field-aligned pressure gradients (i.e., thermal effects in the direction of the magnetic field) and by pressure gradients and magnetic stresses in the perpendicular direction. Within this theory, simple examples of applications are presented to demonstrate the kind of solutions resulting from the model. The results show how the effects of charge separation and shear in the magnetic field and the velocity can be combined to form self-consistent structures such as are found to exist above the aurora, suggested also in association with solar flares.

Hesse, Michael↗
NASA NTRS1983

Stability of electron distributions within the earth's bow shock

The present examination of the linear Vlasov stability of a class of electron velocity distributions modeling those observed within the earth's bow shock is restricted to electrostatic waves propagating parallel to the ambient magnetic field B. Two instabilities are identified as driven by free energy in the direction parallel to B: an ion acoustic wave with real frequency below the ion plasma frequency, and an electron acoustic wave whose real frequency is several times the ion plasma frequency. Unstable wave characteristics are in accord with the trend of the observed electrostatic waves toward polarization parallel to the magnetic field. The instabilities identified may contribute to electron dissipation in collisionless shocks.

Thomsen, M. F.↗
NASA NTRS2014

Internal Charging

(1) High energy (>100keV) electrons penetrate spacecraft walls and accumulate in dielectrics or isolated conductors; (2) Threat environment is energetic electrons with sufficient flux to charge circuit boards, cable insulation, and ungrounded metal faster than charge can dissipate; (3) Accumulating charge density generates electric fields in excess of material breakdown strenght resulting in electrostatic discharge; and (4) System impact is material damage, discharge currents inside of spacecraft Faraday cage on or near critical circuitry, and RF noise.

Minow, Joseph I.↗
NASA NTRS2012

The Exploration Portable Electrostatic Detector (xPED)

Astronauts and rovers, while exploring dynamic environments, can experience charge buildup through Tribo-charging (contact electrification). Charge levels can become substantially high. especially in areas where photoelectric and plasma currents are reduced (e.g. lunar polar crater). Tribo-charging in areas that have little to no charge dissipative path can be severe, leaving an astronaut or roving object to remain charged for extended periods of time. Charge buildup on space suits and/or rovers is expected to present significant hazards to missions, such as electrostatic discharge and arcing, dust adhesion to space suits/equipment, and destruction of equipment. The avoidance of hazards associated with charge buildup is critical for future NASA missions to near earth objects, the Moon and Mars. The Exploration Portable Electrostatic Device (xPED) will allow astronauts to determine their charge state, and also characterize the electrical environment from their excursions. xPED would benefit manned, as well as robotic missions.

Jackson, Telana L.↗
NASA NTRS2012

Electrostatic Studies for the 2008 Hubble Service Repair Mission

High vacuum triboelectric testing of space materials was required to identify possible Electrostatic Discharge (ESD) concerns for the astronauts in space during electronics board replacement on the Hubble Space Telescope. Testing under high vacuum conditions with common materials resulted in some interesting results. Many materials were able to charge to high levels which did not dissipate quickly even when grounded. Certain materials were able to charge up in contact with grounded metals while others were not. An interesting result was that like materials did not exchange electrostatic charge under high vacuum conditions. The most surprising experimental result is the lack of brush discharges from charged insulators under high vacuum conditions.

Buhler, C. R.↗
NASA NTRS1972

RF sheath and admittance characteristics of a spherical plasma probe.

Development of a radio-frequency sheath model for a spherical probe in a collisionless plasma. The method of solution is based on the quasi-static approximation and the electrostatic probe theory of Bernstein and Rabinowitz (1959). The resistive part of the admittance is ascribed to the sheath transit-time collisionless dissipation mechanism suggested by Mayer (1963) and developed by Gould (1964). Expressions are obtained for the effective sheath thickness and the equivalent resistance of the transit-time dissipation. The sheath model and, hence, the admittance are completely determined in terms of the bias potential, the probe radius, the plasma frequency, and the Debye length - i.e., there are no adjustable parameters in the proposed theory which are to be determined by experiment. The results obtained agree favorably with Cohen and Bekefi's (1971) experimental data on the conductance resonant frequency and the width of the conductance peak.

Kan, J. R.↗
NASA NTRS1983

Ion-acoustic solitary waves in a magnetized plasma with arbitrary electron equation of state

The oblique propagation of fully nonlinear, slow ion-acoustic solitary waves in a collisionless, low-beta, magnetized plasma is examined. The analysis includes the effects of a finite ion pressure, electron trapping, and multicomponent particle populations. The existence of both compressive and rarefactive modes propagating obliquely to the magnetic field in a plasma with two distinct Boltzmann electron populations and cold ions is demonstrated. It is shown that paired electrostatic shocks observed over the earth's auroral zone may be closely related to the rarefactive modes. As a measure of the collisionless dissipation encountered by the solitary waves, the linear response of the plasma to slow ion-acoustic waves is also examined.

Witt, E.↗
NASA NTRS1981

Calculations of transonic potential flow over cascades

Transonic flow through a cascade was studied by using the full potential equation and the finite volume method of Jameson and Caughey. The C-type computational grid is generated by an electrostatic analogy and simple shearing transformation. The solution algorithm includes an option of using either an artificial density or an artificial viscosity formulation of the dissipative term. Using the developed code, flows through a cascade of NACA 0012 airfoils and flows through a cascade of shockless blades were computed. It is found that the designed flow through the shockless blade is accurately predicted, the artificial density formulation shows more tolerance to the mesh irregularity, and the C-type mesh does not extend very far upstream for a small pitch-cord ratio.

Jou, W. H.↗
NASA NTRS1981

Effects of turbulence on a kinetic auroral arc model

A plasma kinetic model of an inverted-V auroral arc structure which includes the effects of electrostatic turbulence is proposed. In the absence of turbulence, a parallel potential drop is supported by magnetic mirror forces and charge quasi neutrality, with energetic auroral ions penetrating to low altitudes; relative to the electrons, the ions' pitch angle distribution is skewed toward smaller pitch angles. The electrons energized by the potential drop form a current which excites electrostatic turbulence. In equilibrium the plasma is marginally stable. The conventional anomalous resistivity contribution to the potential drop is very small. Anomalous resistivity processes are far too dissipative to be powered by auroral particles. It is concluded that under certain circumstances equilibrium may be impossible and relaxation oscillations set in.

Cornwall, J. M.↗
NASA NTRS2006

Electrostatic Properties of PE and PTFE Subjected to Atmospheric Pressure Plasma Treatment; Correlation of Experimental Results with Atomistic Modeling

The use of an atmospheric pressure glow discharge (APGD) plasma was used at KSC to increase the hydrophilicity of spaceport materials to enhance their surface charge dissipation and prevent possible ESD in spaceport operations. Significant decreases in charge decay times were observed after tribocharging the materials using the standard KSC tribocharging test. The polarity and amount of charge transferred was dependent upon the effective work function differences between the respective materials. In this study, polyethylene (PE) and polytetrafluoroethylene (PTFE) were exposed to a He+O2 APGD. The pre and post treatment surface chemistry was analyzed by X-ray photoelectron spectroscopy and contact angle measurements. Semi-empirical and ab initio calculations were performed to correlate the experimental results with some plausible molecular and electronic structure features of the oxidation process. For the PE, significant surface oxidation was observed, as indicated by XPS showing C-O, C=O, and O-C=O bonding, and a decrease in the surface contact angle from 98.9 deg to 61.2 deg. For the PTFE, no C-O bonding appeared and the surface contact angle increased indicating the APGD only succeeded in cleaning the PTFE surface without affecting the surface structure. The calculations using the PM3 and DFT methods were performed on single and multiple oligomers to simulate a wide variety of oxidation scenarios. Calculated work function results suggest that regardless of oxidation mechanism, e.g. -OH, =0 or a combination thereof, the experimentally observed levels of surface oxidation are unlikely to lead to a significant change in the electronic structure of PE and that its increased hydrophilic properties are the primary reason for the observed changes in its electrostatic behavior. The calculations for PTFE argue strongly against significant oxidation of that material, as confirmed by the XPS results.

Trigwell, Steve↗
NASA NTRS1981

Dissipation and turbulent heating of plasma in Jupiter's magnetosphere

Voyager 1 observations of plasma waves in the dayside Jovian magnetosphere which show a correlation with measurements of localized concentrations of cool thermal plasma are presented. This moderately intense broadband electrostatic noise is shown to be of sufficient intensity to accelerate superthermal ions to energies approximately 1 keV and higher. This process can account for the extensive heating of plasma in the magnetosphere and can energize a fraction of heavy ions to injection threshold for a high-energy second stage acceleration mechanism. A brief discussion of the relation of this noise to Jovian magnetospheric dynamics is included.

Barbosa, D. D.↗
NASA NTRS2021

Permittivity Measurement System Using Stripline Method for the Europa Clipper Mission

High radiation Jovian environment can deposit electrons in highly resistive dielectric materials, which could result in internal electrostatic discharge (IESD) causing damage to sensitive electronics such as the radar for Europa Assessment and Sounding: Ocean to Near-Surface (REASON) instrument on NASA’s Europa Clipper mission. Special dielectric materials like static dissipative Polyetheretherketone (PEEK) ESD are under consideration for the Europa Clipper mission. PEEK loaded with carbon nanofibers improves the ESD performance for this material but the RF characteristics are unknown. We have developed a method to characterize the dielectric constant of a material as a function of frequency and temperature down to 30K. We present the measurement results of four samples of ESD. The measured data shows the permittivity of TECAPEEK ESD 11 is in the range of 7 to 10 at HF and in the range of 6.8 to 8.3 for VHF frequencies. The change in permittivity of ESD 11 down to 30 K is less than 7% at HF and less than 3% at VHF frequency. The sample to sample variability can be attributed to the inhomogeneity of the material.

Decrossas, Emmanuel↗
NASA NTRS1983

The nonlocal theory of periodic density drift instabilities

The nonlocal theory of electrostatic density drift instabilities is developed for an arbitrary, periodic variation in plasma density. Linear Vlasov theory is applied to Fourier series representations of the plasma density, and the resulting equations are solved numerically. The growth rates of the universal drift instability are compared by using local and nonlocal theories. It is demonstrated that the local theory is inadequate if the nonlocal eigenfunctions of the electrostatic modes have significant amplitude over spatial regions wider than the regions of large plasma density gradients. Nonlocal effects can enhance wave-particle diffusion of a triangular-shaped variation and reduce wave-particle dissipation of a square-shaped irregularity.

Bernhardt, P. A.↗