Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dielectric waveguide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

46 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Additive Manufactured Compact Microwave Absorbers

A high-performance, compact microwave absorber was created using Fused Deposition Modeling (FDM) 3D printing. Both a narrowband and a broadband absorber were created. The narrowband absorber was designed at 4.9 GHz, mid-band in WR-187 waveguide. The broadband absorber tried to achieve the best attenuation across the entire 3.95 to 5.85 GHz band. Two types of carbon loaded polylactic acid (PLA) plastic and one type of unloaded PLA were 3D printed with variable percentages of air to achieve different values of effective dielectric constant and loss tangent. The absorber comprised five or six rectangular pieces of these plastic materials. The thickness and fill factor values for each piece were optimized to minimize reflection through fast analytic modeling in MATLAB®. The results were then verified by HFSS® simulation as well. The stack progressed from the lowest loss and lowest dielectric constant to the highest at the shorting end. The final narrowband load had simulated return loss of 87 dB at 4.9 GHz with an analytic solution in MATLAB. The measured return loss of the 3D printed attenuator was 73 dB at 4.929 GHz. The total length of the absorber was 2.44 inches. A commercial absorber for WR-187 with return loss of 40 dB has length of 13 inches. The experiment proves that an effective and compact microwave absorber can be created using 3D printing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Printed Microwave Connector

This paper describes the development of a printed, planar microwave connector operating from 1-7 GHz. The connector, which is based on a Grounded Coplanar Waveguide (GCPW) transmission line structure, is fabricated using 3D-printed thermoplastic material (PEEK) and conductive nanoparticle silver ink. Electromagnetic models were established to provide guidance on design tradeoffs and their impact on microwave performance. New mechanical designs were also developed to provide accurate alignment and robust connection of the two halves of the planar connector structure. Initial connector prototypes were fabricated to validate the new planar design using conventional double-sided copper laminates (Isola MT40). The designs were then implemented in an all-printed version of the connector. Electromagnetic models of the printed connectors were developed using the measured dielectric properties of printed PEEK. The insertion loss of the printed connectors was measured to be less than 1.7dB across the band.

Microwave Connector, printed electronics, additive↗
DOE OSTI2025

Enhancing the Infrared Emission from Silver Chalcogenide Quantum Dots Through Microcavity Coupling

Nanocrystals (NCs) appear as a promising platform for cost effective infrared optoelectronics, while offering a simplified coupling to the CMOS platform. However, this perspective is slowed down by toxicity concerns, the most effective materials being based on Pb and Hg. There is currently a large effort to bring forth new platforms that are active in the infrared with a reduced heavy metal content. Here, in this study, the focus is on silver chalcogenides, which, thanks to a combination of inter‐ and intraband transitions, is suited to cover both short and mid wave infrared ranges. However, this material being less mature, the achieved photoluminescence (PL) appears quite broad, which is problematic for device integration. Here, it is demonstrated that a strong control over the PL spectrum can be obtained through integration into a dielectric cavity that magnifies the electric field by a factor 20 and narrows the PL full width at half maximum down to 15 nm for an emission at telecom wavelength. The PL is also highly directional to avoid most waveguiding effects which is of utmost interest for enhancing the efficiency of NC‐based light emitting diodes.

infrared luminescence↗
DOE OSTI2021

Spectral signatures of transverse optical modes in semiconductor nanowires

In order to build nanophotonic devices, it is important to understand and ultimately control the optical mode structure within potential components such as nanoscale waveguides. However, experimental characterization of such modes in the optical regime is difficult due to the nanoscale dimensions of such components and the perturbations that would be induced by a near-field probe. Here, we demonstrate a probe-free, far-field method to characterize the optical modes within GaN nanowires (NWs) based on a novel off-axis scanning confocal microscope system. Using this microscope, we observe spectral signatures resulting from lateral leakage of waveguide modes when they exceed their respective cutoff limits. We identify these modes within hyperspectral images using an analytical model coupled with finite element simulations. The model can also be used to predict the spectral signatures for given geometrical and dielectric parameters, which enabled us to deduce the transverse dimension of the NW from hyperspectral images with an accuracy of ∼ <#comment/> 30 nm .

Wang, Maoji↗
DOE OSTI2022

Topology Optimization of Manufacturable Photonic Crystals With Complete Bandgaps [Dissertation]

Periodic structures consisting of dielectric material, i.e. photonic crystals, are capable of prohibiting electromagnetic waves within frequency ranges referred to as bandgaps. This principle was first demonstrated with alternating slabs of material and later demonstrated with three-dimensional (3D) structures capable of reflecting waves from any incident angle. A number of potential applications for photonic bandgap structures exist, including loss-less sharp corner waveguides, fiber optics, and radome design. Further, many optical devices could benefit from the perfect-mirror behavior of photonic crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Tuning Kinetic Inductance with Doping in Superconducting Electron Gases at the KTaO 3 (111) Interface

We used coplanar waveguide resonators fabricated from the two-dimensional superconductor formed at KTaO 3 (111) interfaces to characterize the superconductor’s sheet kinetic inductance L K/□ . Upon varying the carrier density, in samples with T c ranging from 0.62 to 1.81 K, we can tune L K/□ between 1.88 and 7.42 nH/□ at the lowest temperatures, exceeding the highest values reported for granular aluminum films. The temperature dependence of L K/□ is consistent with a superconducting gap without nodes. The high L K/□ of superconducting KTaO 3 (111) interfacial electron gases combined with the high dielectric constant of KTaO 3 results in resonators with exceedingly low phase velocities (“slow light”) and small mode volumes. In addition, superconducting KTaO 3 (111) interfacial electron gases are robust in magnetic fields well above a Tesla. In conclusion, these features can enable unique device applications in superconducting electronics and quantum information science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Control of work functions of nanophotonic components

Work function is an essential material’s property playing important roles in electronics, photovoltaics, and more recently, in nanophotonics. We have studied effects of organic, and inorganic dielectric materials on work functions of Au films in single layered, and multilayered structures. We found that measured work function of metallic surfaces can be affected by dielectric materials situated 10–100 nm away from the metallic surface. We have found that, (i) the glass underneath ~ 50 nm gold slab reduces the work function of gold, (ii) Rh590:PMMA increases the work function of a gold film deposited on top of the polymer, and (iii) reduces it if Rh590:PMMA is deposited on top of Au. (iv) With increase of the Rh590 concentration in PMMA, n, the work function first decreases (at n < 64 g/l), and then increases (at n > 64 g/l). (v) The work function of a Fabry–Perot cavity or an MIM waveguide is almost the same as that of single Au films of comparable thickness. The experimental results can be qualitatively explained in terms of a simple model taking into account adhesion of charged molecules to a metallic surface, and formation of a double layer of charges accelerating or decelerating electrons exiting the metal and decreasing or increasing the work function.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Temporal and spatial laser intensification within nodular defects overcoated with multilayer dielectric mirrors over a wide range of defect geometries

The nodular defect shape and the laser incidence angle have a dramatic impact on the spatial distribution of light intensification within the nodule as well as how the laser light is drained from the defect. Nodular defect geometries unique to ion beam sputtering, ion-assisted deposition, and electron-beam (e-beam) deposition, respectively, are modeled in this parametric study over a wide range of nodular inclusion diameters and layer count for optical interference mirror coatings constructed with quarter-wave thicknesses and capped with a half wave of the low index material. It was found for hafnia ($n$=1.9) and silica ($n$=1.45) multilayer mirrors that the light intensification in nodular defects with a $C$ factor of 8, typical of e-beam deposited coatings deposited with a wide range of deposition angles, was maximized for a 24-layer design. For intermediate size inclusion diameters, increasing the layer count for normal incidence multilayer mirrors reduced the light intensification within the nodular defect. A second parametric study explored the impact of the nodule shape on the light intensification for a fixed number of layers. In this case, there is a strong temporal trend for the different nodule shapes. Narrow nodules tend to drain more laser energy through the bottom of the nodule into the substrate while wide nodules tend to drain more laser energy through the top of the nodule when irradiated at normal incidence. Further, at a 45° incidence angle, waveguiding is an additional method to drain laser energy from the nodular defect. Finally, laser light resonates within nodular defects longer than within the adjacent nondefective multilayer structure.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Quantum states of cylindrical surface charge density for modeling plasmonic circuit elements: Nanowires, nanorods, cavities, and waveguides

Nanostructures in the form of ellipsoids, prolate spheroids, rings, and cylinders are known to exhibit resonant surface and cavity modes with applications in nanophotonics and plasmonics and, more recently, in novel quantum experiments, in which control of plasmons and their interactions with plasmons, photons, phonons, excitons, and quantum emitters are desired. Nanorods and nanowires are examples of plasmonic structures with spectral properties of potential use as interconnects and circuit components. Additionally, estimates of the surface properties of these components are needed in circuit design and integrated systems. Here, we present a quantum Hamiltonian for the cylindrical surface charge density. We then study the photon excitation of plasmons on the cylindrical surface and calculate their scattering and radiative decay rate. Nonradiative decay of plasmons induces an efficient heating of the nanoparticle and can photoacoustically excite mechanical oscillations. Computational calculations are also presented for the plasmonic modes and the ensuing excitations of nanomechanical eigenmodes of nanoparticles with near-cylindrical symmetries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Anomalous Loss Reduction Below Two‐Level System Saturation in Aluminum Superconducting Resonators

Superconducting resonators are widely used in many applications such as qubit readout for quantum computing, and kinetic inductance detectors. These resonators are susceptible to numerous loss and noise mechanisms, especially the dissipation due to two-level systems (TLS) which become the dominant source of loss in the few-photon and low temperature regime. In this study, capacitively-coupled aluminum half-wavelength coplanar waveguide resonators are investigated. Surprisingly, the loss of the resonators is observed to decrease with a lowering temperature at low excitation powers and temperatures below the TLS saturation. This behavior is attributed to the reduction of the TLS resonant response bandwidth with decreasing temperature and power to below the detuning between the TLS and the resonant photon frequency in a discrete ensemble of TLS. When response bandwidths of TLS are smaller than their detunings from the resonance, the resonant response and thus the loss is reduced. At higher excitation powers, the loss follows a logarithmic power dependence, consistent with predictions from the generalized tunneling model (GTM). A model combining the discrete TLS ensemble with the GTM is proposed and matches the temperature and power dependence of the measured internal loss of the resonator with reasonable parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗