Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “deviated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Modeling the 3-D flow effects on deviation angle for axial compressor middle stages

A model of the spanwise variation of the three-dimensional flow effects on deviation is proposed for middle-stage rotors and stators. This variation is taken as the difference above or below that predicted by blade element theory at any spanwise location. It was found that the stator variation is strongly affected by the end-wall boundary-layer thickness as well as camber, solidity, and blade channel aspect ratio. Rotor variation was found to depend on end-wall boundary layer thickness and tip clearance normalized by blade span. If these parameters are known or can be calculated, the models provide a reasonable approximation to the spanwise variation of deviation for middle compressor stages operating at low to high subsonic inlet Mach numbers.

Roberts, W. B.↗
NASA NTRS1987

Imaging performance of annular apertures. VI - Limitations by optical surface deviations

The performance of optical systems is limited by imperfect optical surfaces that degrade the images below the level set by wave theoretical limits. The central irradiance functions are derived for slit and circular apertures with five distributions of wavefront errors and for a range of maximal wavefront deviations. For practical frequency of occurrence distributions of wavefront deviations, the point spread and the image energy integral functions are determined. Practical performances of optical systems are derived and performance limits discussed.

Tschunko, Hubert F. A.↗
NASA NTRS1991

Computerized inspection of real surfaces and minimization of their deviations

A method is developed for the minimization of gear tooth surface deviations between theoretical and real surfaces for the improvement of precision of surface manufacture. Coordinate measurement machinery is used to determine a grid of surface coordinates. Theoretical calculations are made for the grid points. A least-square method is used to minimize the deviations between real and theoretical surfaces by altering the manufacturing machine-tool settings. An example is given for a hypoid gear.

Litvin, Faydor L.↗
NASA NTRS1992

deltaT/T limits from the UCSB South Pole degree-scale experiment and constraints on the large-scale deviations from the Hubble flow

The limits to the cosmic microwave background radiation (CBR) temperature anisotropy derived from the results of the University of California at Santa Barbara South Pole degree-scale experiment are translated into upper bounds on large-scale deviations from the Hubble flow. The lack of measurable CBR anisotropy in this experiment implies very low upper bounds upon the rms amplitude V(R) of the streaming motion within a Gaussian window of radius R: Vmax(R is greater than 4000 km/s) less than 200 km/s, and Vmax(R is greater than 7500 km/s) is less than 100 km/s. Thus, the smoothness of the CBR at about 1-2 deg and the apparent large-amplitude (about 500 km/s) deviations from pure Hubble flow at R greater than about 4000 km/s cannot be simultaneously explained in the framework of usual large-scale structure formation models based on the assumptions involved in this calculation.

Gorski, Krzysztof M.↗
NASA NTRS1991

Deviated plane varied line-space grating spectrograph

The limit of resolution for the planar varied line-space grating in a converging beam can be found by analyses of the optical path errors. The errors may be canceled by slight deviations of the planar substrate surface. The cancellation of the path errors leads to a markedly improved spectral resolution. The surface figure for an improved resolution deviated planar varied line-space grating spectrograph is shown. Ray-tracing of this improved spectrograph shows substantial gains in spectral performance.

Edelstein, Jerry↗
NASA NTRS1993

Altitude deviations: Breakdowns of an error-tolerant system

Pilot reports of aviation incidents to the Aviation Safety Reporting System (ASRS) provide a window on the problems occurring in today's airline cockpits. The narratives of 10 pilot reports of errors made in the automation-assisted altitude-change task are used to illustrate some of the issues of pilots interacting with automatic systems. These narratives are then used to construct a description of the cockpit as an information processing system. The analysis concentrates on the error-tolerant properties of the system and on how breakdowns can occasionally occur. An error-tolerant system can detect and correct its internal processing errors. The cockpit system consists of two or three pilots supported by autoflight, flight-management, and alerting systems. These humans and machines have distributed access to clearance information and perform redundant processing of information. Errors can be detected as deviations from either expected behavior or as deviations from expected information. Breakdowns in this system can occur when the checking and cross-checking tasks that give the system its error-tolerant properties are not performed because of distractions or other task demands. Recommendations based on the analysis for improving the error tolerance of the cockpit system are given.

Palmer, Everett A.↗
NASA NTRS1995

Allan deviation computations of a linear frequency synthesizer system using frequency domain techniques

Allan Deviation computations of linear frequency synthesizer systems have been reported previously using real-time simulations. Even though it takes less time compared with the actual measurement, it is still very time consuming to compute the Allan Deviation for long sample times with the desired confidence level. Also noises, such as flicker phase noise and flicker frequency noise, can not be simulated precisely. The use of frequency domain techniques can overcome these drawbacks. In this paper the system error model of a fictitious linear frequency synthesizer is developed and its performance using a Cesium (Cs) atomic frequency standard (AFS) as a reference is evaluated using frequency domain techniques. For a linear timing system, the power spectral density at the system output can be computed with known system transfer functions and known power spectral densities from the input noise sources. The resulting power spectral density can then be used to compute the Allan Variance at the system output. Sensitivities of the Allan Variance at the system output to each of its independent input noises are obtained, and they are valuable for design trade-off and trouble-shooting.

Wu, Andy↗
NASA NTRS2005

Perception of aircraft Deviation Cues

To begin to address the need for new displays, required by a future airspace concept to support new roles that will be assigned to flight crews, a study of potentially informative display cues was undertaken. Two cues were tested on a simple plan display - aircraft trajectory and flight corridor. Of particular interest was the speed and accuracy with which participants could detect an aircraft deviating outside its flight corridor. Presence of the trajectory cue significantly reduced participant reaction time to a deviation while the flight corridor cue did not. Although non-significant, the flight corridor cue seemed to have a relationship with the accuracy of participants judgments rather than their speed. As this is the second of a series of studies, these issues will be addressed further in future studies.

Martin, Lynne↗
NASA NTRS2011

Differential Deposition to Correct Surface Figure Deviations in Astronomical Grazing-Incidence X-Ray Optics

A coating technique is being developed to correct the surface figure deviations in reflective-grazing-incidence X-ray optics. These optics are typically designed to have precise conic profiles, and any deviation in this profile, as a result of fabrication, results in a degradation of the imaging performance. To correct the mirror profiles, physical vapor deposition has been utilized to selectively deposit a filler material inside the mirror shell. The technique, termed differential deposition, has been implemented as a proof of concept on miniature X-ray optics developed at MSFC for medical-imaging applications. The technique is now being transferred to larger grazing-incidence optics suitable for astronomy and progress to date is reported.

Kilaru, Kiranmayee↗
NASA NTRS2016

Minimizing the Standard Deviation of Spatially Averaged Surface Cross-Sectional Data from the Dual-Frequency Precipitation Radar

For an airborne or spaceborne radar, the precipitation-induced path attenuation can be estimated from the measurements of the normalized surface cross section, sigma 0, in the presence and absence of precipitation. In one implementation, the mean rain-free estimate and its variability are found from a lookup table (LUT) derived from previously measured data. For the dual-frequency precipitation radar aboard the global precipitation measurement satellite, the nominal table consists of the statistics of the rain-free 0 over a 0.5 deg x 0.5 deg latitude-longitude grid using a three-month set of input data. However, a problem with the LUT is an insufficient number of samples in many cells. An alternative table is constructed by a stepwise procedure that begins with the statistics over a 0.25 deg x 0.25 deg grid. If the number of samples at a cell is too few, the area is expanded, cell by cell, choosing at each step that cell that minimizes the variance of the data. The question arises, however, as to whether the selected region corresponds to the smallest variance. To address this question, a second type of variable-averaging grid is constructed using all possible spatial configurations and computing the variance of the data within each region. Comparisons of the standard deviations for the fixed and variable-averaged grids are given as a function of incidence angle and surface type using a three-month set of data. The advantage of variable spatial averaging is that the average standard deviation can be reduced relative to the fixed grid while satisfying the minimum sample requirement.

spaceborne meteorological radar↗
NASA NTRS2019

Deviation of the Shape of Bennu from Rotational Figures of Stability

Images of asteroid (101955) Bennu acquired by the OSIRIS-­REx mission reveal a rocky world covered in rubble; Shape deviates from hydrostatic surface; Internal friction and/or cohesion even if no tensile strength; Understanding the deviation of the surface from idealized shape may help constrain mechanical properties of the interior; Geologic evolution of Bennu is driven by downslope migration of surface material and rubble; May be caused by YORP-induced spin-up, re-­accumulation, impact-induced seismic shaking, thermal stresses, or tidal disruption by close encounters to larger bodies.

Roberts, J. H.↗
NASA NTRSDate not supplied

Assessment of Segmentation-Induced Deviations of Porosity Metrics in Powder Bed Fusion Additively Manufactured Components

Post processing X-ray computational tomography (CT) inspection data for additively manufactured (AM) components can induce deviations in defect quantification, affecting subsequent fatigue and failure predictions. To assess the influence and potential impact of segmentation-induced measurement deviations, this paper applies several segmentation techniques to X-ray CT data for powder bed fusion Ti-6Al-4V specimens exhibiting porosity conditions. X-ray CT reconstructions were segmented with varying techniques including Otsu’s thresholding, random forest, k-nearest neighbors, and the multilayer perceptron. Metrics such as pore size and global porosity were compared for internal validity. Then, top-down X-ray CT measurements of surface-breaking porosity were compared to optical profilometry for cross-validation.

Data fusion↗
DOE OSTI2024

Unveiling Temporal Performance Deviation: Leveraging Clustering in Microservices Performance Analysis

As the market for cloud computing continues to grow, an increasing number of users are deploying applications as microservices. The shift introduces unique challenges in identifying and addressing performance issues, particularly within large and complex infrastructures. To address this challenge, we propose a methodology that unveils temporal performance deviations in microservices by clustering containers based on their performance characteristics at different time intervals. Showcasing our methodology on the Alibaba dataset, we found both stable and dynamic performance patterns, providing a valuable tool for enhancing overall performance and reliability in modern application landscapes.

Clustering↗
DOE OSTI2022

Citizen Green #1 Well: Drilling, Deviation, Mud, Whole Core, and Observation Logs

This submission includes drilling logs, mud log, deviation survey, site observation notes, and whole core scans from the Citizen Green #1 well drilled on King Island, CA (API 07720688) as part of the WESTCARB partnership basin characterization effort. These datasets were gathered by JAF but created and compiled by a variety of WESTCARB operations team members and contractors including Sandia Resources, Stratagraphic Corp, John Henry Beyer, Paul Graham Drilling, and Core Labs.

Core CT↗
DOE OSTI2025

CdSe Magic-Size Clusters Deviate from Nanocrystal-Size Scalings for Ultrafast Intraband Relaxation and Auger Recombination

The cluster regime of colloidal semiconductor quantum dots (QDs) occupies an interesting space on the continuum from molecule to bulk material and allow the study of QD properties at extreme quantum confinement limits. For typical QDs, several size-dependent property trends are well established including intraband relaxation rates and universal scaling of Auger recombination with particle volume. Advances in synthesis now allow isolation of atomically precise semiconductor magic-size clusters (MCs), which offer experimental insight regarding how electronic structure changes with particle size in the ultrasmall limit. Here, we report intraband cooling and Auger recombination for several stable CdSe MCs as a function of particle size and observe deviation from QD response in the cluster regime. We additionally show optical signatures ascribed to transient disordering 2 that appear in the single exciton regime for MCs, which point to complexities regarding their implementation.

Auger recombination↗
DOE OSTI2025

Deviations from the Porter-Thomas Distribution due to Nonstatistical 𝛾 Decay below the 150 Nd Neutron Separation Threshold

We introduce a new method for the study of fluctuations of partial transition widths based on nuclear resonance fluorescence experiments with quasimonochromatic linearly polarized photon beams below particle separation thresholds. It is based on the average branching of decays of 𝐽=1 states of an even-even nucleus to the 2$^{+}_{1}$ state in comparison to the ground state. Between 5 and 7 MeV, a constant average branching ratio for 𝛾 decays from 1 − states of 0.490(16) is observed for the nuclide 150 Nd. Assuming 𝜒 2 -distributed partial transition widths, this average branching ratio is related to a degree of freedom of 𝜈 = 1.93⁢(12), rejecting the validity of the Porter-Thomas distribution, requiring 𝜈 = 1. The observed deviation can be explained by nonstatistical effects in the 𝛾-decay behavior with contributions in the range of 9.4(10)% up to 94(10)%.

150 ≤ A ≤ 189↗
DOE OSTI2025

Deviation from Debye-Waller behavior in single crystalline freestanding Ni⁢ O membranes studied via ultrafast electron diffraction

Here, we realize single-crystal freestanding Ni⁢O films on Si⁢N membranes, enabling thin-film scattering experiments with little or no substrate background signal. These membrane samples provide a critical platform for performing ultrafast electron diffraction (UED) to probe the response of the lattice to laser excitation. We show that epitaxial Ni⁢O films on a water-soluble Sr 2 ⁢Ca⁢Al 2⁢ O 6 buffer layer on Sr⁢Ti⁢O 3 substrates can be transferred as freestanding films to the Si⁢N membranes while maintaining the epitaxial character of the films. An above-gap photoexcitation (𝜆 =266 nm) incident on the sample stimulates an initial lattice response of the order of 1.1 ps, followed by the persistence of this state for more than 20 ps. We observe typical Debye-Waller behavior in peaks with 𝑞 above the (220) family, but a distinct deviation from this behavior is seen in low-𝑞 peaks. We relate this behavior to a dynamic decrease in sample mosaicity in response to the optical pump of the order of 3% that endures for approximately 4 ps. We suspect that this dynamic mosaicity is due to laser-induced strain propagation. This work demonstrates the viability of the thin-film transfer method for UED and paves the way for the study of the dynamic response of antiferromagnetic thin-film oxides.

Wisser, Jacob J. [Stanford Univ., CA (United State↗