Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “depth data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Properties and decay of stratospheric aerosols in the Arctic following the 1991 eruptions of Mount Pinatubo

Sunphotometer observations made from an aircraft several months after the June 1991 eruptions of Mount Pinatubo are used to quantify the spectral opacity of the Arctic stratosphere. Ancillary surface-based measurements are presented in support of the aircraft data that show large increases in stratospheric optical depth attributed to the presence of volcanic aerosols. Visible optical depths greater than 0.2 were observed during flight segments flown above the tropopause. An inversion algorithm and the optical depth data are used to infer effective aerosol size distributions. The distributions tend to be bimodal, having a large-partical mode radius of about 0.50 micron and a small-particle mode of higher concentration with radii less than 0.18 micron. Surface measurements made during spring 1992 and 1993 are also used to estimate a time constant (e-folding time) of about 13.5 months assuming that the Arctic stratosphere's opacity decays exponentially; this estimate is larger than decay times observed following other major volcanic eruptions. Our results suggest that any climate perturbations in the Arctic caused by eruptions of Pinatubo may be significant and will very likely persist longer than any volcanically-induced changes observed there during the past century.

Stone, Robert S.↗

Martian crater depth/diameter relationships - Comparison with the moon and Mercury

New Martian topographic data from Mariner 9 ultraviolet spectrometer (UVS) profiles provide depth data for 139 Martian craters of all degrees of degradation, between the diameters of 15 and 201 km. The population of Martian craters, including morphologically fresh examples, is shallower than both lunar and Mercurian fresh crater populations. Because the surface gravities of Mercury and Mars are identical within 5%, these differences in fresh crater depths suggest that factors other than gravity may play important roles in determining initial crater depths (e.g., differences in impact velocity, substrate variations, and Martian atmospheric effects during the crater-forming event). Degraded Martian craters are, on the average, no shallower than lunar pre-Imbrian craters of similar sizes. If the early bombardment of Mars was as significant a degradational agent as it was on the moon, then major levels of crater degradation and crater shallowing on Mars were associated with this mechanism. Continued eolian infilling, although locally significant, may be a less significant cause of morphometric degradation of large old Martian craters.

Cintala, M. J.↗

Pit depth analysis using automated software for three containers with complete imaging

The 3013 surveillance program is tasked with ensuring the long term safety of plutonium storage in 3013-compliant containers. One component of this task is to understand corrosion features found on the interior sidewall of the inner container closure weld region (ICCWR). To this end, three containers were selected to have laser confocal microscope (LCM) 20X imaging of the entire ICCWR. This report describes the analysis of the LCM pit depth data using the automated corrosion analysis software. The analysis included determining maximum pit depths and distributions of pit depths, volumes, and diameters for all pit features identified on the three containers. Results provided insight into possible corrosion mechanisms and were consistent with previous pit growth model predictions.

36 MATERIALS SCIENCE↗

Antarctic Sea-Ice Freeboard and Estimated Thickness from NASA's ICESat and IceBridge Observations

ICESat completed 18 observational campaigns during its lifetime from 2003 to 2009. Data from all of the 18 campaign periods are used in this study. Most of the operational periods were between 34 and 38 days long. Because of laser failure and orbit transition from 8-day to 91-day orbit, there were four periods lasting 57, 16, 23, and 12 days. IceBridge data from 2009, 2010, and 2011 are used in this study. Since 2009, there are 19 Airborne Topographic Mapper (ATM) campaigns, and eight Land, Vegetation, and Ice Sensor (LVIS) campaigns over the Antarctic sea ice. Freeboard heights are derived from ICESat, ATM and LVIS elevation and waveform data. With nominal densities of snow, water, and sea ice, combined with snow depth data from AMSR-E/AMSR2 passive microwave observation over the southern ocean, sea-ice thickness is derived from the freeboard. Combined with AMSR-E/AMSR2 ice concentration, sea-ice area and volume are also calculated. During the 2003-2009 period, sea-ice freeboard and thickness distributions show clear seasonal variations that reflect the yearly cycle of the growth and decay of the Antarctic pack ice. We found no significant trend of thickness or area for the Antarctic sea ice during the ICESat period. IceBridge sea ice freeboard and thickness data from 2009 to 2011 over the Weddell Sea and Amundsen and Bellingshausen Seas are compared with the ICESat results.

Antarctic↗

Model for aspect ratio dependent etch modulated processing

A time-multiplexed, anisotropic, inductively coupled plasma Si deep reactive ion etch process is characterized in terms of the Si macroload, cross-wafer spatial variation, local pattern density, and feature size. The process regime is established as neutral flux limited, in which material transport occurs in the molecular flow to transition flow regimes. For this process regime, a semiempirical, unified analytic model and a numeric model are developed using the Dushman and Clausing vacuum conductance correction factors, respectively, in the Coburn and Winters model of aspect ratio dependent etching. The experimental reaction probability for etching of Si by F was found to be 0.24 for Dushman's factor and 0.22 for Clausing's factor. Each model is validated to {+-}10% against experimental depth data for microdonut and trench test structures and match each other to within 10% for depths of up to 160 {mu}m. The observed depth range is 64 {mu}m at a depth of 160 {mu}m.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast Semi-automated Filtration Method for Non-targeted LC-QTOF Data of Aged Nitroplasticizer Samples

A full dataset of aged nitroplasticizer (NP) is composed of more than 2000 unique mass-to-charges (m/z) when combining the non-targeted data obtained from both positive and negative electrospray ionization modes in time-of-flight mass spectrometry. Therefore, manual processing of these data often takes days, weeks, or even months to scrutinize for mechanistic insights. To effectively extract meaningful signals that represent vital degradation intermediates in the early NP degradation mechanism, a semi-automated postprocessing workflow for data filtering, tailored to the aging experiment of NP, has been developed. The automated portion of this workflow is written in a Python code (using pandas, numpy, and matplotlib libraries), which removes more than 65% of potential false signals within seconds via four threshold-based adjustable filters: signal sensitivity, coefficient of variation, number of measurements, and retention time variability. As for the manual portion, a pattern-based inspection method is employed to reduce another 23% or more false positives, which greatly simplifies data visualization and results in less than 3% of potential candidate m/z needing in-depth data interpretation. As a positive control, known compounds are verified. Using this semi-automated data reduction method, the amount of time required is reduced to a matter of hours for data filtering in the non-targeted datasets of aged NP, which saves more time and effort for compound identification.

36 MATERIALS SCIENCE↗

Subsurface mechanical damage correlations after grinding of various optical materials

Loose abrasive grinding was performed on a wide range of optical workpiece materials [single crystals of Al 2 O 3 (sapphire), SiC, Y 3 Al 5 O 12 (YAG), CaF 2 , and LiB 3 O 5 (LBO); a SiO 2 -Al 2 O 3 -P 2 O 5 -Li 2 O glass-ceramic (Zerodur); and glasses of SiO 2 : TiO 2 (ULE), SiO 2 (fused silica), and P 2 O 5 -Al 2 O 3 -K 2 O-BaO (phosphate)]. Using the magneto rheological finishing (MRF) taper wedge technique (where a wedge was polished on each of the ground workpieces and the resulting samples were appropriately chemically etched), the subsurface mechanical damage (SSD) characteristics were measured. The SSD depth for most of the workpiece materials was found to scale as E1 1/2 / H 1 , where E 1 is the elastic modulus and H 1 is the hardness of the workpiece. This material scaling is the same as that for the growth of lateral cracks, suggesting that lateral cracks are a dominant source for SSD rather than radial/median cracks, as previously proposed. Utilizing the SSD depth data from both this study and others, semiempirical relationships have been formulated, which allows for estimating the SSD depth as a function of workpiece material and important grinding parameters (such as abrasive size and applied pressure).

36 MATERIALS SCIENCE↗

Impact of genotype-calling methodologies on genome-wide association and genomic prediction in polyploids

This dataset contains all data used in the paper "Impact of genotype-calling methodologies on genome-wide association and genomic prediction in polyploids". The dataset includes genotypes and phenotypic data from two autotetraploid species Miscanthus sacchariflorus and Vaccinium corymbosum that was used used for genome wide association studies and genomic prediction and the scripts used in the analysis. In this V2, 2 files have the raw data are added: "Miscanthus_sacchariflorus_RADSeq.vcf" is the VCF file with the raw SNP calls of the Miscanthus sacchariflorus data used for genotype calling using the 6 genotype calling methods. "Blueberry_data_read_depths.RData" is the a RData file with the read depth data that was used for genotype calling in the Blueberry dataset.

allelic dosage↗

HUBBLE FRONTIER FIELDS FIRST COMPLETE CLUSTER DATA: FAINT GALAXIES AT z ∼ 5-10 FOR UV LUMINOSITY FUNCTIONS AND COSMIC REIONIZATION

We present comprehensive analyses of faint dropout galaxies up to z ∼ 10 with the first full-depth data set of the A2744 lensing cluster and parallel fields observed by the Hubble Frontier Fields (HFF) program. We identify 54 dropouts at z ∼ 5-10 in the HFF fields and enlarge the size of the z ∼ 9 galaxy sample obtained to date. Although the number of highly magnified (μ ∼ 10) galaxies is small because of the tiny survey volume of strong lensing, our study reaches the galaxies' intrinsic luminosities comparable to the deepest-field HUDF studies. We derive UV luminosity functions with these faint dropouts, carefully evaluating by intensive simulations the combination of observational incompleteness and lensing effects in the image plane, including magnification, distortion, and multiplication of images, with the evaluation of mass model dependencies. Our results confirm that the faint-end slope, α, is as steep as –2 at z ∼ 6-8 and strengthen the evidence for the rapid decrease of UV luminosity densities, ρ{sub UV}, at z > 8 from the large z ∼ 9 sample. We examine whether the rapid ρ{sub UV} decrease trend can be reconciled with the large Thomson scattering optical depth, τ{sub e}, measured by cosmic microwave background experiments, allowing a large space of free parameters, such as an average ionizing photon escape fraction and a stellar-population-dependent conversion factor. No parameter set can reproduce both the rapid ρ{sub UV} decrease and the large τ {sub e}. It is possible that the ρ{sub UV} decrease moderates at z ≳ 11, that the free parameters significantly evolve toward high z, or that there exist additional sources of reionization such as X-ray binaries and faint active galactic nuclei.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluating proxy influence in assimilated paleoclimate reconstructions – Testing the exchangeability of two ensembles of spatial processes

Climate field reconstructions (CFR) attempt to estimate spatiotemporal fields of climate variables in the past using climate proxies such as tree rings, ice cores, and corals. Data Assimilation (DA) methods are a recent and promising new means of deriving CFRs that optimally fuse climate proxies with climate model output. Despite the growing application of DA-based CFRs, little is understood about how much the assimilated proxies change the statistical properties of the climate model data. To address this question, we propose a robust and computationally efficient method, based on functional data depth, to evaluate differences in the distributions of two spatiotemporal processes. In this study, we apply our test to study global and regional proxy influence in DA-based CFRs by comparing the background and analysis states, which are treated as two samples of spatiotemporal fields. We find that the analysis states are significantly altered from the climate-model-based background states due to the assimilation of proxies. Moreover, the difference between the analysis and background states increases with the number of proxies, even in regions far beyond proxy collection sites. Our approach allows us to characterize the added value of proxies, indicating where and when the analysis states are distinct from the background states.

54 ENVIRONMENTAL SCIENCES↗

Importance of Quantifying the Full-depth Carbon Reservoir of Jamaica Bay Salt Marshes, New York

Constraining uncertainty in the global carbon cycle requires valid assessment of both surface and stored carbon in marine and coastal ecosystems (Blue Carbon) as well as terrestrial carbon (forests, peatlands, and soils) [Pendleton et al., 2012]. Quantifying the global carbon stock of coastal salt marshes, potentially the most efficient carbon-burying ecosystems in the world per area, is a key area of further research in both of these fields Pendleton et al., 2012. One of the largest challenges is that despite the fact that salt marshes often sequester carbon several meters deep, nearly all estimates of salt marsh carbon stocks consider only the upper 1 m of sediment (Windham-Myers et al., 2015) [54]. This is particularly concerning because coastal wetlands are increasingly at risk due to climate change, sea level rise, and anthropogenic disturbance and destruction (Deegan et al., 2012) [15]. Using full-depth measurements from marsh cores, we estimate the carbon stock of five salt marshes in the highly urbanized estuary of Jamaica Bay, New York and argue that partial-depth measurements can underestimate carbon stocks. These estimates use calculated carbon content and probe depth data of these marshes collected between 2000 and 2019, applying this data across the full area of the marsh obtained from satellite imagery. Carbon density measurements are then multiplied by the full-depth volume of the marshes to create an estimate of total carbon stock. In addition to calculating present-day estimates, we compare our carbon stock estimates to historical Jamaica Bay imagery to calculate historical carbon stocks and carbon loss. The carbon stock estimates presented here show a 95% carbon stock loss between 1885 and 2019 in Jamaica Bay and highlight the severe underestimation of carbon stocks without full-depth calculations. These findings have important implications for disappearing salt marshes with regard to the global carbon cycle and the incorporation of belowground carbon into global climate models. The findings are increasingly relevant for advocacy efforts aiming to conserve these marshes with sea level rise.

Tidal wetlands↗

Stability of sulfur slopes on Io

The mechanical properties of elemental sulfur are such that the upper crust of Io cannot be primarily sulfur. For heat flows in the range 100-1000 ergs/sq cm sec sulfur becomes ductile within several hundred meters of the surface and would prevent the formation of calderas with depths greater than this. However, the one caldera for which precise depth data are available is 2 km deep, and this value may be typical. A study of the mechanical equilibrium of simple slopes shows that the depth to the zone of rapid ductile flow strongly controls the maximum heights for sulfur slopes. Sulfur scarps with heights greater than 1 km will fail for all heat flows greater than 180 ergs/sq cm sec and slope angles greater than 22.5 deg. The observed relief on Io is inconsistent with that anticipated for a predominantly sulfur crust. However, a silicate crust with several percent sulfur included satisfies both the mechanical constraints and the observed presence of sulfur on Io.

Clow, G. D.↗

3-D advanced gas-cooled nuclear reactor fuel channel reconstruction using structure-from-motion - 110

During planned, periodic outages, a selection of fuel channels within the UK fleet of Advanced Gas-cooled Reactor (AGR) cores are inspected using specialist tools which record video footage and other sensory data for each channel which undergoes inspection. Current visualization techniques comprise of manually produced montages by inspection engineers of points of interest (i.e. structural defects) and 2-D panoramic images of the fuel channels automatically produced using bespoke image stitching software. Both techniques however provide limited structural information due to the loss of depth data as a result of the image formation process. By recovering the depth information from the footage, a 3D model could be constructed and subsequently, allow for more accurate profiling of specific defects observed during inspection in addition to obtaining the fuel channels structure using existing footage. This work explores the preliminary application of a 3-D visualization technique known as Structure-from-Motion (SfM) which aims to obtain 3-D information by exploiting image correspondences across multiple viewpoints of the same scene in the RVI footage. This paper investigates the difficulties of applying state-of-the-art SfM to RVI footage and we present new techniques to improve feature correspondence searching in repetitive, nondescript environments. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reference Site Condition Datasets for Floating Wind Arrays in the United States

Floating offshore wind farm design is highly site-specific, requiring detailed information about the specific conditions of a project area for realistic design studies. Unfortunately, publicly available site condition data for potential floating offshore wind project sites in the United States is scarce. To support U.S. offshore wind research, we developed reference site condition datasets, including metocean and seabed information, for four potential floating wind project areas in the U.S.: Humboldt Bay, Morro Bay, the Gulf of Maine, and the Gulf of Mexico. These datasets were compiled using publicly available data. Our metocean analysis, covering wind, waves, and surface currents, utilized measurement data from 2000 to 2020. Sources included the National Renewable Energy Laboratory’s National Offshore Wind Dataset for wind data, National Data Buoy Center buoys for wave data, and the High Frequency Radar Network for surface currents. These data were integrated into hourly time series used to compute extreme return periods up to 500 years, monthly statistics, and joint probability clusters for fatigue analysis. Soil conditions were evaluated using the usSEABED database and bathymetry grids were interpolated from the NCEI Digital Elevation Model Global Mosaic. Further information on the datasets and how they were created can be found in: Biglu, M., M. Hall, E. Lozon, S. Housner. 2024. Reference Site Conditions for Floating Wind Arrays in the United States. Golden, CO: National Renewable Energy Laboratory (NREL). NREL/TP-5000-89897. The data are also available at: https://github.com/FloatingArrayDesign/SiteConditions The content of each dataset is as follows: _NOW23_wind.txt: Hourly NOW-23 wind data up to a height of 400 meter. _metocean_1hr.txt: Hourly time series including wind, wave, surface current and temperature data. _Summary.xlsx: Metocean data, including extreme values, joint probability distributions and monthly statistics. _usSEABED_soil.csv: Extract of the usSEABED database for this specific site. _bathymetry_200m.txt (and 500m, 1000m): Gridded seabed depth data.

16 TIDAL AND WAVE POWER↗

Arctic Snow Depth and Sea Ice Thickness From ICESat‐2 and CryoSat‐2 Freeboards: A First Examination

We present a first examination of Arctic sea ice snow depth estimates from differencing satellite lidar (ICESat‐2) and radar (CryoSat‐2) freeboards. These estimates cover the period between 14 October 2018 and the end of April 2019. Snow depth is related to freeboard differences by the refractive index/bulk density of the snow layer—the only free parameter in the approach. Area‐averaged snow depth ranges from 9 cm (on first‐year ice: 5 cm, multiyear ice: 14 cm) in late October to 19 cm (first‐year ice: 17 cm, multiyear ice: 27 cm) in April; on average, this snow is thinner over FYI. Spatial patterns and gradients of snow depth estimates compare well with reconstructions using snowfall from ERA‐Interim and ERA5, although snowfall from ERA5 is systematically higher. For all months, the results suggest that ~50% of the total freeboard is comprised of snow. Retrievals are within a few centimeters of snow depth data acquired by Operation IceBridge in April 2019. Sources of uncertainties associated with this freeboard‐differencing approach are discussed. Further, sea ice thicknesses calculated using the retrieved snow depth and a modified climatology are contrasted. Comparatively, the snow depth and calculated ice thickness using a modified climatology are higher by ~5 cm and 0.33 m, although these differences are not uniform throughout the season. Snow accumulation was slower between October and December but increased between December and January, unlike the modified climatology, which exhibited a monotonic accumulation for all months. Future opportunities for assessment and improvement of these estimates are discussed.

Arctic Ocean↗

Scaling laws for the additive manufacturing

The evaluation of simple thermal model of selective laser melting (SLM) process shows that the temperature distribution in the sample is characterized by two dimensionless parameters: normalized enthalpy and the ratio of dwell time to the thermal diffusion time. Here we demonstrated that the melt depth data taken for different machines for different materials collapsed in one curve, making possible to rescale the optimal processing parameters between the different materials and machines. The melt pool depth, width and the length are the universal function of these two parameters. Within the operational range of parameters for SLM these functions can be interpolated by the simple algebraic expressions given the possibility to reduce the calculation of the melt pool characteristic to spreadsheet model.

36 MATERIALS SCIENCE↗