SEARCH · Engineering Papers

Results for “data accountability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1993

Remote sensing of submerged vegetation canopies for biomass estimation

The visible bands of the Landsat Thematic Mapper (TM) sensor were used in an empirical assessment of seagrass biomass on shallow banks near Lee Stocking Island in the Bahamas. The TM bands were transformed to minimize the depth-dependent variance in the bottom reflectance signal. Regression analyses were performed between the transformed bands and field measurements of seagrass standing crop (above-ground biomass). Regression equations using spectral data accounted for up to 80 per cent of the variability in seagrass biomass. The unexplained variance was ascribed to variations in bottom sediment color.

Armstrong, Roy A.↗

NASA NTRS2018

NICER Discovers the Ultracompact Orbit of the Accreting Millisecond Pulsar IGR J17062-6143

We present results of recent Neutron Star Interior Composition Explorer (NICER) observations of the accreting millisecond X-ray pulsar (AMXP) IGR J17062-6143 that show that it resides in a circular, ultracompact binary with a 38-minute orbital period. NICER observed the source for 26 kiloseconds over a 5.3-day span in 2017 August, and again for 14 and 11 kiloseconds in 2017 October and November, respectively. A power spectral analysis of the August exposure confirms the previous detection of pulsations at 163.656 Hertz in Rossi X-ray Timing Explorer (RXTE) data, and reveals phase modulation due to orbital motion of the neutron star. A coherent search for the orbital solution using the Z squared method finds a best-fitting circular orbit with a period of 2278.21 seconds (37.97 minutes), a projected semimajor axis of 0.00390 lt-s (Localization Test Statistic), and a barycentric pulsar frequency of 163.6561105 Hertz. This is currently the shortest known orbital period for an AMXP. The mass function is 9.12 times 10 (sup minus 8) solar mass, presently the smallest known for a stellar binary. The minimum donor mass ranges from approximately 0.005 to 0.007 times the solar mass for a neutron star mass from 1.2 to 2 times the solar mass. Assuming mass transfer is driven by gravitational radiation, we find donor mass and binary inclination bounds of 0.0175-0.0155 times the solar mass and 19 degrees less than i less than 27.5 degrees, where the lower and upper bounds correspond to 1.4 and 2 times the solar mass neutron stars, respectively. Folding the data accounting for the orbital modulation reveals a sinusoidal profile with fractional amplitude 2.04 plus or minus 0.11 percent (0.3-3.2 kiloelectronvolts).

Strohmayer, T. E.↗

NASA NTRSDate not supplied

Measuring Upwelling Longwave in the Presence of an Obstruction

One of the key measurements from the Clouds and the Earth’s Radiant Energy System (CERES) satellite is Earth emitted or longwave (LW) radiation. The Baseline Surface Radiation Network (BSRN) aims to provide upwelling LW observations of the best possible quality across all their measurement sites. The disestablished CERES Ocean Validation Experiment (COVE), located at Chesapeake Light Station, approximately 25 kilometers east of Virginia Beach, Virginia (coordinates: 36.90N, 75.71W) was a validation site for CERES measurements and part of the BSRN network. One of the measurements at COVE was upwelling LW radiation made with an Eppley pyrgeometer. However, this measurement was complicated due to the Light Station tower being in its field of view. According to our estimates, the Light Station tower altered 15% of the upwelling LW radiation. To resolve this issue, we obtain a different upwelling longwave value using data from an infrared radiation thermometer (IRT), a pyrgeometer that measures downwelling longwave, and meteorological data. Using an IRT allows conversion from sea surface temperature to a water emission value, the downwelling pyrgeometer provides the reflected flux of the downward longwave radiation, and the meteorological data accounts for the air affects between the ocean surface and the upwelling LW measurement height. Comparing the upwelling LW pyrgeometer value with the newly derived value shows the unwanted consequence of the tower. The tower appears to enhance the upwelling LW signal during the summer, most obvious on a summer clear day, but depresses the upwelling signal, even more, during winter sky conditions (both clear and overcast). The tower affects the upwelling LW measurement in these scenarios up to 5% (20 W/m^2) when compared to the newly derived value. BSRN target uncertainty is 2%. Installing a pyrgeometer to measure upwelling LW without obstructions may not be possible at some measurement sties. This issue can be mitigated using other measurements to derive an upwelling LW value.

Bryan Fabbri↗

DOE OSTI2026

How does drought affect residential water demand and price elasticity?

Urban water scarcity is an important social and economic concern, particularly as the intensity, duration, and frequency of droughts is increasing in many regions. We consider whether drought induces changes to water demand and the price elasticity of demand for water that may last beyond a drought’s official end date. If drought shocks prompt long-term changes in water demand behavior, and these changes occur at broad geographic scale, they could have important implications for modeling adaptive responses to water scarcity. We assemble a novel dataset on residential water demand and pricing in the western United States to test empirically for effects of drought on water demand and price elasticity. We perform our analysis with aggregate quantity, price, and drought data, accounting for endogenous prices under increasing-block water tariffs and using both average and marginal water fees in estimating water demand functions. Results are consistent with the hypothesis that households may become less price-sensitive after exposure to drought. However, we find no systematic evidence of long-run, drought-related reductions in water demand, itself.

demand hardening↗

DOE OSTI2026

Core Model Proposal #410: Updates to Socioeconomic and Macroeconomic Data, Processing Structure, and Visualization

This Core Model Proposal (CMP) comprehensively restructures and updates the macroeconomic and socioeconomic modules in gcamdata. It includes visualizations of key data inputs, accounting identities, and data flows in the context of GCAM-Macro-KLEM. Major improvements include: (1) updating the Penn World Table (PWT) to version 10 and incorporating a new source, the Global Macro Database (GMD); (2) updating the SSP socioeconomics database from version 3.0.1 to 3.2; (3) introducing SSP-specific differentiation of employment and labor force data; (4) improving data integration between national accounts (from PWT, GMD, and GTAP) and GDP/population data from external sources; and (5) general data cleaning and structural refinements. We document the data sources and key assumptions used throughout the processing. These updates establish the foundation for the forthcoming KLEAM version of GCAM-macro.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2026

Data for Greenhouse Gas Accounting Procedures in Low Carbon Fuel Policies Overlook the Spatial Variability of Miscanthus-Derived Sustainable Aviation Fuel

Low carbon fuel policies such as the U.S. Renewable Fuel Standard (RFS), Canada Clean Fuel Regulations (CFR), and California Low Carbon Fuel Standard (LCFS) as well as the 45Z tax credit are intended to reduce greenhouse gas (GHG) emissions from transportation. Cellulosic feedstocks, optimized biorefineries, and favorable farming locations can significantly reduce biofuel carbon intensity (CI). Despite advances in field-to-fuel GHG monitoring and flexibility in resource allocation within biorefineries (e.g., governing net electricity production), rigid CI accounting procedures in current policies may limit CI responsiveness across candidate sites and processing facilities. This work examines a hypothetical biomass-to-sustainable aviation fuel (SAF) pathway using miscanthus and alcohol-to-jet (i) to demonstrate how GHG accounting requirements drive estimates of biofuel CIs and (ii) to explore potential CI and financial implications of scenario-specific life cycle assessment (LCA). Results demonstrate that GHG accounting using the CFR/LCFS can reasonably account for distinct levels of net electricity production by a biorefinery, but only the CFR yields similar CI sensitivity to spatially explicit factors (feedstock CI, grid electricity CI) as scenario-specific LCA: most GHG accounting frameworks do not capture CI variation across candidate sites in the United States. Ultimately, this work demonstrates the importance of LCA methodological specifications in low carbon fuel policies and tax credits.

Miscanthus↗

DOE OSTI2024

Data‐driven variational method for discrepancy modeling: Dynamics with small‐strain nonlinear elasticity and viscoelasticity

Abstract The effective inclusion of a priori knowledge when embedding known data in physics‐based models of dynamical systems can ensure that the reconstructed model respects physical principles, while simultaneously improving the accuracy of the solution in the previously unseen regions of state space. This paper presents a physics‐constrained data‐driven discrepancy modeling method that variationally embeds known data in the modeling framework. The hierarchical structure of the method yields fine scale variational equations that facilitate the derivation of residuals which are comprised of the first‐principles theory and sensor‐based data from the dynamical system. The embedding of the sensor data via residual terms leads to discrepancy‐informed closure models that yield a method which is driven not only by boundary and initial conditions, but also by measurements that are taken at only a few observation points in the target system. Specifically, the data‐embedding term serves as residual‐based least‐squares loss function, thus retaining variational consistency. Another important relation arises from the interpretation of the stabilization tensor as a kernel function, thereby incorporating a priori knowledge of the problem and adding computational intelligence to the modeling framework. Numerical test cases show that when known data is taken into account, the data driven variational (DDV) method can correctly predict the system response in the presence of several types of discrepancies. Specifically, the damped solution and correct energy time histories are recovered by including known data in the undamped situation. Morlet wavelet analyses reveal that the surrogate problem with embedded data recovers the fundamental frequency band of the target system. The enhanced stability and accuracy of the DDV method is manifested via reconstructed displacement and velocity fields that yield time histories of strain and kinetic energies which match the target systems. The proposed DDV method also serves as a procedure for restoring eigenvalues and eigenvectors of a deficient dynamical system when known data is taken into account, as shown in the numerical test cases presented here.

Masud, Arif↗

NASA NTRS2016

Global Erratum for Kepler Q0-Q17 and K2 C0-C5 Short Cadence Data

An accounting error has scrambled much of the short-cadence collateral smear data used to correct for the effects of Keplers shutterless readout. This error has been present since launch and affects approximately half of all short-cadence targets observed by Kepler and K2 to date. The resulting calibration errors are present in both the short-cadence target pixel files and the short-cadence light curves for Kepler Data Releases 1-24 and K2 Data Releases 1-7. This error does not affect long-cadence data. Since it will take some time to correct this error and reprocess all Kepler and K2 data, a list of affected targets is provided. Even though the affected targets are readily identified, the science impact for any particular target may be difficult to assess. Since the smear signal is often small compared to the target signal, the effect is negligible for many targets. However, the smear signal is scene-dependent, so time varying signals can be introduced into any target by the other stars falling on the same CCD column. Some tips on how to assess the severity of the calibration error are provided in this document.

Caldwell, Douglas↗

NASA NTRS1992

Observability under recurrent loss of data

An account is given of the concept of extended observability in finite-dimensional linear time-invariant systems under recurrent loss of data, where the state vector has to be reconstructed from an ensemble of sensor data at nonconsecutive samples. An at once necessary and sufficient condition for extended observability that can be expressed via a recursive relation is presented, together with such conditions for this as may be related to the characteristic polynomial of the state transition matrix in a discrete-time setting, or of the system matrix in a continuous-time setting.

Luck, Rogelio↗

DOE OSTI2024

3D reconstruction of an inertial-confinement fusion implosion with neural networks using multiple heterogeneous data sources

3D asymmetries are major degradation mechanisms in inertial-confinement fusion implosions at the National Ignition Facility (NIF). These asymmetries can be diagnosed and reconstructed with the neutron imaging system (NIS) on three lines of sight around the NIF target chamber. Conventional tomographic reconstructions are used to reconstruct the 3D morphology of the implosion using NIS [Volegov et al., J. Appl. Phys. 127, 083301 (2020)], but the problem is ill-posed with only three imaging lines of sight. Asymmetries can also be diagnosed with the real-time neutron activation diagnostics (RTNAD) and the neutron time-of-flight (nToF) suite. Since the NIS, RTNAD, and nToF each sample a different part of the implosion using different physical principles, we propose that it is possible to overcome the limitations of too few imaging lines of sight by performing 3D reconstructions that combine information from all three heterogeneous data sources. This work presents a new machine learning-based reconstruction technique to do just this. By using a simple physics model and group of neural networks to map 3D morphologies to data, this technique can easily account for data of multiple different types. A simple proof-of-principle is presented, demonstrating that this technique can accurately reconstruct a hot-spot shape using synthetic primary neutron images and a hot-spot velocity vector. In particular, the hot-spot’s asymmetry, quantified as spherical harmonic coefficients, is reconstructed to within ±4% of the radius in 90% of test cases. In the future, this technique will be applied to actual NIS, RTNAD, and nToF data to better understand 3D asymmetries at the NIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1984

Analysis of Doppler lidar wind measurements

New analysis methods were developed and refined for the synthesis of wind fields from multiple Doppler radar data. Considerable software was written and debugged for wind field synthesis. The analysis methods were applied to radar data collected during the CCOPE experiment in which lidar wind measurements were also made. The analysis method differs from existing methods in that interpolation (using filters with assigned weights) and advection of data, to account for time differential between data acquisition at different points, are not used. Instead, functional fits were used in space and time coordinates to transfer radial velocity data to a space-time grid. Subsequently the wind synthesis is performed. This method gives better space resolution in the synthesized winds, compared to other methods in common use, by better preserving the gradients of velocities. The wind fields show the cellular structure characteristic of boundary-layer convection. Also evident in the analysis are the sharp transitions and gradients in the wind field which were preserved by the synthesis.

Srivastava, R. C.↗

DOE OSTI2025

Graph-Based Prediction of Spatio-Temporal Vaccine Hesitancy From Insurance Claims Data

Growing vaccine hesitancy is contributing to the decline in immunization rates for highly contagious, vaccine-preventable childhood diseases. Therefore, there has been a significant interest in understanding how hesitancy is spreading at higher spatio-temporal resolutions, enabling more targeted interventions. Motivated by this, we study the problem of prediction of vaccine hesitancy at the ZIP Code level, referred to as the VaxHesitancy problem. A significant challenge for this problem is the lack of high-resolution data that indicates hesitancy. Here, we develop a hybrid VaxHesSTL framework that combines a Graph Neural Network (GNN) and a Recurrent Neural Network (RNN) to address the VaxHesitancy problem. The GNN uses a ZIP Code-level network to capture spatial signals from neighboring areas, while the RNN models the temporal dynamics present in the data. We train and evaluate VaxHesSTL using a large dataset, namely the All-Payer Claims Databases (APCD), for Virginia, consisting of insurance claims from over five million individuals for six years. We find that an aggregated contact network or graph, developed from a detailed activity-based population network, plays an important role in the performance of VaxHesSTL, compared to graph models based solely on spatial proximity. Experiments demonstrate that VaxHesSTL outperforms a range of state-of-the-art baselines, which rely solely on historical time series data without accounting for spatial relationships. Since hesitancy data at higher spatial resolution is often unavailable or hard to get, we incorporate an active learning approach with our VaxHesSTL framework to optimize the training set without compromising the prediction performance. We find that hesitancy data for only 18% of ZIP Codes selected by active learning allows us to forecast hesitancy for all the ZIP Codes in the Virginia.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1986

Proceedings of the Second Airborne Imaging Spectrometer Data Analysis Workshop

The Second Airborne Imaging Spectrometer (AIS) Data Analysis Workshop was held at the Jet Propulsion Laboratory on May 6, 7, and 8, 1986. It was attended by 100 people from seven countries. Papers were presented by 24 attendees; summaries of 19 of the papers are published in these Workshop Proceedings. The Second Workshop was divided into three sessions: Calibration, the Atmosphere, and Data Techniques; Geological Research; and Botanical and Geobotanical Research. Because many of the AIS researchers have had an additional year to work with their data, a general advance was seen in the utilization of the data for solving earth science problems. The major conclusions that can be drawn from the Workshop are: (1) Almost everyone now working with AIS data is attempting to take into account in data analysis the effects of the atmosphere and sensor calibration and performance. As a result, information extraction techniques are becoming more sophisticated and effective. (2) The emphasis on work in the geological disciplines is beginning to shift to the application of AIS data for solving geological problems now that the efficacy of the data for mineral identification has been demonstrated. (3) In the botanical sciences, interpretation of AIS data is becoming more quantitative. Several statistical techniques are under development for extracting the subtle differences in plant spectra in the region of the near infrared and short wavelength infrared. In summary, an overall advance was seen in the ability to effectively utilize the fundamentally new class of data acquired with imaging spectrometers. There was also a general feeling at the Workshop however, that much work remains to be done in remote sensing research before the maximum potential of these data for solving earth science problems is realized.

Gregg Vane↗

NASA NTRS2005

Data management in the mission data system

As spacecraft evolve from simple embedded devices to become more sophisticated computing platforms with complex behaviors it is increasingly necessary to model and manage the flow of data, and to provide uniform models for managing data that promote adaptability, yet pay heed to the physical limitations of the embedded and space environments.

mission data system (MDS)↗

NASA NTRSDate not supplied

The Field Guide to NASA’s Life Sciences Data Repositories

For over 30 years, NASA has invested in life sciences research both in space and on the ground. Data accessibility is an important tool for researchers, and NASA has committed to preserving this vital resource for ongoing use. The Life Sciences Data Archive’s multi-center collaboration between NASA’s Johnson Space Center, Ames Research Center, and Kennedy Space Center is geared toward preserving unique and high-value data from a wide variety of disciplines, data collection methods, and species within NASA’s Life Sciences Portal (NLSP). The data generated by the Human Research Program (HRP) require a systematic approach to data preservation that accounts for diverse data sources, formats, physical storage requirements, and security and privacy protections. This poster presentation will provide a guide to the repositories where the various types of human, non-human animal, plant, and microbial data NASA generates are archived and tips for navigating these data collections. Topics will include where different types of data, metadata, and biospecimens are archived or preserved, how the federated repositories work together as a data preservation ecosystem, and how researchers can access each repository’s collections.

Robert S Beaton↗

NASA NTRSDate not supplied

A Field Guide to NASA’s Life Sciences Data Repositories

LSDA↗

NASA NTRS1988

Spacelab data processing facility (SLDPF) Quality Assurance (QA)/Data Accounting (DA) expert systems: Transition from prototypes to operational systems

The SLDPF is responsible for the capture, quality monitoring processing, accounting, and shipment of Spacelab and/or Attached Shuttle Payloads (ASP) telemetry data to various user facilities. Expert systems will aid in the performance of the quality assurance and data accounting functions of the two SLDPF functional elements: the Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS). Prototypes were developed for each as independent efforts. The SIPS Knowledge System Prototype (KSP) used the commercial shell OPS5+ on an IBM PC/AT; the SOPS Expert System Prototype used the expert system shell CLIPS implemented on a Macintosh personal computer. Both prototypes emulate the duties of the respective QA/DA analysts based upon analyst input and predetermined mission criteria parameters, and recommended instructions and decisions governing the reprocessing, release, or holding for further analysis of data. These prototypes demonstrated feasibility and high potential for operational systems. Increase in productivity, decrease of tedium, consistency, concise historial records, and a training tool for new analyses were the principal advantages. An operational configuration, taking advantage of the SLDPF network capabilities, is under development with the expert systems being installed on SUN workstations. This new configuration in conjunction with the potential of the expert systems will enhance the efficiency, in both time and quality, of the SLDPF's release of Spacelab/AST data products.

Basile, Lisa↗

NASA NTRS1988

Spacelab data processing facility (SLDPF) quality assurance (QA)/data accounting (DA) expert systems - Transition from prototypes to operational systems

The SLDPF is responsible for the capture, quality monitoring processing, accounting, and shipment of Spacelab and/or Attached Shuttle Payloads (ASP) telemetry data to various user facilities. Expert systems will aid in the performance of the quality assurance and data accounting functions of the two SLDPF functional elements: the Spacelab Input Processing System (SIPS) and the Spacelab Output Processing System (SOPS). Prototypes were developed for each as independent efforts. The SIPS Knowledge System Prototype (KSP) used the commercial shell OPS5+ on an IBM PC/AT; the SOPS Expert System Prototype used the expert system shell CLIPS implemented on a Macintosh personal computer. Both prototypes emulate the duties of the respective QA/DA analysts based upon analyst input and predetermined mission criteria parameters, and recommended instructions and decisions governing the reprocessing, release, or holding for further analysis of data. These prototypes demonstrated feasibility and high potential for operational systems. Increase in productivity, decrease of tedium, consistency, concise historical records, and a training tool for new analyses were the principal advantages. An operational configuration, taking advantage of the SLDPF network capabilities, is under development with the expert systems being installed on SUN workstations. This new configuration in conjunction with the potential of the expert systems will enhance the efficiency, in both time and quality, of the SLDPF's release of Spacelab/AST data products.

Basile, Lisa↗