Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cubic crystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Visualization of texture components using MTEX

Knowledge of the appearance of texture components and fibres in pole figures, in inverse pole figures and in Euler space is fundamental for texture analysis. For cubic crystal systems, such as steels, an extensive literature exists and, for example, the book by Matthies, Vinel & Helming [Standard Distributions in Texture Analysis: Maps for the Case of Cubic Orthorhomic Symmetry, (1987), Akademie-Verlag Berlin] provides an atlas to identify texture components. For lower crystal symmetries, however, equivalent comprehensive overviews that can serve as guidance for the interpretation of experimental textures do not exist. Here, this paper closes this gap by providing a set of scripts for the MTEX package [Bachmann, Hielscher & Schaeben (2010). Solid State Phenom.160, 63–68] that allow the texture practitioner to compile such an atlas for a given material system, thus aiding orientation distribution function analysis also for non-cubic systems.

36 MATERIALS SCIENCE↗
NASA NTRS2002

Ion Milling of Sapphire

The ion figuring system at the Marshall Space Flight Center has been successfully used for at least three previous investigations into the ion milling of metals. The research was directed toward improving the surface quality of X-ray directing optics. These studies were performed on surfaces that were already hand polished to an excellent surface quality and were intended to remove the residual unwanted figure left by those techniques. The ion milling was typically carried out on test surfaces or mandrels that were several centimeters in width and length. The good thermal conductivity of the metal samples allowed the ion beam to be directed onto the sample for an indefinite period of time. This is not true of sapphire or most electrical insulators and problems have arisen in recent attempts to ion mill thin samples of sapphire. The failure and fracture of the material was likely due to thermal stresses and the relatively low thermal conductivity of sapphire (compared to most metals), These assumed stresses actually provided the key as to how they might be monitored. A thermal gradient in the sapphire sample will induce an effective index of refraction change and because of the shape constraint and the crystal structure and simple thermal expansion, this index change will be nonuniform across the sample. In all but simple cubic crystal structures, this leads to a spatially nonuniform optical retardance induced on any polarized optical beam traversing the sample, and it is this retardance that can be monitored using standard polarimetric procedures.

Don A. Gregory↗
DOE OSTI2024

Modeling plasticity-mediated void growth at the single crystal scale: A physics-informed machine learning approach

Modeling the evolution of voids during plastic flow as well as their effects on plastic dissipation is critical for both component manufacturing and lifetime estimation purposes. To this end, we propose a rate-dependent constitutive model to homogenize the effects of semi-randomly distributed voids on single crystal plasticity whilst capturing void interaction and plastic anisotropy. Here, this present work focuses on the case of face centered cubic crystals to introduce an anisotropic gauge function applicable within the crystal plasticity formalism. The approach combines analytical methods to describe the micromechanics of the system in combination with symbolic regression to capture analytically intractable mechanisms from data. The hybrid framework uses a physics-informed genetic programming-based symbolic regression algorithm to solve a multiform optimization problem simultaneously producing a new gauge function and a new strain rate equation. This is also a multi-objective optimization problem with many competing objectives. A new search and selection step is introduced to the genetic algorithm that promotes convergence toward a global solution that better satisfies all the objectives. Overall, the symbolic equations produced leverage data-driven methods to achieve greater accuracy than comparable alternatives on an analytically intractable problem while maintaining model transparency.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multiphonon excitations from dark matter scattering in crystals

For direct detection of sub-MeV dark matter, a promising strategy is to search for individual phonon excitations in a crystal. We perform an analytic calculation of the rate for light dark matter ( keV < m DM < MeV ) to produce two acoustic phonons through scattering in cubic crystals such as GaAs, Ge, Si, and diamond. The multiphonon rate is always smaller than the rate to produce a single optical phonon, whenever the latter is kinematically accessible. In Si and diamond, there is a dark matter mass range for which multiphonon production can be the most promising process, depending on the experimental threshold.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Spin-orbital order and excitons in magnetoresistive HoBi

The magnetism of the rocksalt fcc rare-earth monopnictide HoBi, a candidate topological material with extreme magnetoresistance, is investigated. From the Ho 3+ non-Kramers J=8 spin-orbital multiplet, the cubic crystal electric field yields six nearly degenerate low-energy levels. These constitute an anisotropic magnetic moment with a Jahn-Teller-like coupling to the lattice. In the cubic phase for T>T N =5.72(1)K, the paramagnetic neutron scattering is centered at k=($\frac{1}{2}$$\frac{1}{2}$$\frac{1}{2}$) and was fit to dominant antiferromagnetic interactions between Ho spins separated by {100} and ferromagnetic interactions between spins displaced by {$\frac{1}{2}$ $\frac{1}{2}$ 0}. For T < T N , a type-II AFM long-range order with k=($\frac{1}{2}$$\frac{1}{2}$$\frac{1}{2}$) develops along with a tetragonal lattice distortion. While neutron diffraction from a multidomain sample cannot unambiguously determine the spin orientation within a domain, the bulk magnetization, structural distortion, and our measurements of the magnetic excitations all show the easy axis coincides with the tetragonal axis. Finally, the weakly dispersive excitons for T < T N can be accounted for by a spin Hamiltonian that includes the crystal electric field and exchange interactions within the random phase approximation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

An idealized model for the crystal structure of intermetallic compounds isostructural with Mg 3 Cr 2 Al 18

Mg 3 Cr 2 Al 18 (abbreviated in this report as MCA) is the parent phase for a large class of intermetallic compounds that belong to the cubic crystal space group, $Fd\overline{3}m$. The purpose of this paper is to introduce an ideal, unrelaxed crystal structure for compounds isostructural with MCA. There are five distinct atomic sublattices in MCA compounds, which can be denoted, $A, B, C, D,$ and $E$. With this, a general description for MCA structures can be written as $A^{8a}_{1}B^{16c}_{2}C^{16d}_{2}D^{48f}_{6}E^{96g}_{12}$, where the superscripts represent the Wyckoff special equipoints associated with the various sublattices in MCA, and the subscripts indicate the contributions of each sublattice to the stoichiometry of one formula unit in an any given MCA structured compound. Sublattices D and E are where deviations from ideality occur in real, MCA-like compounds. This paper examines MCA bond lengths, nearest-neighbour polyhedral arrangements, 3-D sublattice crystal structures, 2-D atom tessellation patterns, and crystal chemical effects associated with atomic relaxations on the $D$ and $E$ sublattices. The ideal MCA crystal structure developed in this report provides an appropriate initial structure for use as input to crystal structure refinements of diffraction data for MCA-like phases being examined experimentally, or as input for computational, atomistic simulations of the structures of such compounds.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural, electronic, and magnetic properties of nearly ideal J eff = 1/2 iridium halides

Heavy transition metal magnets with J e f f = 1 2 electronic ground states have attracted recent interest due to their penchant for hosting new classes of quantum spin liquids and superconductors. Unfortunately, model systems with ideal J e f f = 1 2 states are scarce due to the importance of noncubic local distortions in most candidate materials. In this work, we identify a family of iridium halide systems [i.e., K 2 Ir Cl 6 , K 2 Ir Br 6 , ( NH 4 ) 2 Ir Cl 6 , and Na 2 Ir Cl 6 · 6 ( H 2 O ) ] with Ir 4 + electronic ground states exhibiting extremely small deviations from the ideal J e f f = 1 2 limit. We also find ordered magnetic ground states for the three anhydrous systems, with single-crystal neutron diffraction on K 2 Ir Br 6 revealing type-I antiferromagnetism. This spin configuration is consistent with expectations for significant Kitaev exchange in a face-centered-cubic magnet. This work establishes that incorporating isolated Ir X 6 octahedra in materials, where X is a halogen ion with a low electronegativity, is an effective design principle for realizing unprecedented proximity to the pure J e f f = 1 2 state. However, at the same time, we highlight undeniable deviations from this ideal state, even in clean materials with ideal Ir X 6 octahedra as inferred from the global cubic crystal structures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The Role of Phonons and Oxygen Vacancies in Non-Cubic SrVO 3

Combining neutron diffraction with pair distribution function analysis, we have uncovered hidden reduced symmetry in the correlated metallic d 1 perovskite, SrVO 3 . Specifically, we show that both the local and global structures are better described using a GdFeO 3 distorted (orthorhombic) model as opposed to the ideal cubic ABO 3 perovskite type. Recent reports of imaginary phonon frequencies in the density functional theory (DFT)-calculated phonon dispersion for cubic SrVO 3 suggest a possible origin of this observed non-cubicity. Namely, the imaginary frequencies computed could indicate that the cubic crystal structure is unstable at T = 0 K. However, our DFT calculations provide compelling evidence that point defects in the form of oxygen vacancies, and not an observable symmetry breaking associated with calculated imaginary frequencies, primarily result in the observed non-cubicity of SrVO 3 . These experimental and computational results are broadly impactful because they reach into the thin-film and theoretical communities who have shown that SrVO 3 is a technologically viable transparent conducting oxide material and have used SrVO 3 to develop theoretical methods, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Iodide Double Perovskites and the Limits of their Structural Stability

AbstractWhile halide double perovskites A2M(I)M(III)X6 have attracted significant attention, examples involving iodides are rare. We examine the limits of the structural stability of iodide double perovskites, presenting the synthesis and single‐crystal structures of Cs2NaScI6 and Cs2NaYI6. Bypassing the common expectation that iodides have small band gaps, these compounds display optical gaps of 3.10 eV [M(III) = Sc] and 3.65 eV [M(III) = Y]. Cs2NaScI6 is the only iodide double perovskite to exhibit a cubic crystal structure at room temperature. Density functional theory‐based electronic structure calculations help understand the role of competing Cs3M(III)2I9 (3 : 2 : 9) phases and provide possible reasons for why iodide double perovskites based around In(III), Sb(III) and Bi(III) cations have proved elusive. We confirm design rules for halide double perovskites based around concepts of the tolerance factor and the radius ratio of the smaller, trivalent ion, but also point to situations such as what is observed for Cs2NaScI6 where a double perovskite can be trapped in a metastable structure.

Mulligan, Anya S.↗
NASA NTRS1995

The growth of cubic silicon carbide on a compliant substrate

Research has shown that silicon carbide grown on silicon and 6H silicon carbide has problems associated with these substrates. This is because silicon and silicon carbide has a 20% lattice mismatch and cubic silicon carbide has not been successfully achieved on 6H silicon carbide. We are investigating the growth of silicon carbide on a compliant substrate in order to grow defect free silicon carbide. This compliant substrate consists of silicon/silicon dioxide with 1200 A of single crystal silicon on the top layer. We are using this compliant substrate because there is a possibility that the silicon dioxide layer and the carbonized layer will allow the silicon lattice to shrink or expand to match the lattice of the silicon carbide. This would improve the electrical properties of the film for the use of device fabrication. When trying to grow silicon carbide, we observed amorphous film. To investigate, we examined the process step by step using RHEED. RHEED data showed that each step was amorphous. We found that just by heating the substrate in the presence of hydrogen it changed the crystal structure. When heated to 1000 C for 2 minutes, RHEED showed that there was an amorphous layer on the surface. We also heated the substrate to 900 C for 2 minutes and RHEED data showed that there was a deterioration of the single crystalline structure. We assumed that the presence of oxygen was coming from the sides of the silicon dioxide layer. Therefore, we evaporated 2500 A of silicon to all four edges of the wafer to try to enclose the oxygen. When heating the evaporated wafer to 900 C the RHEED data showed single crystalline structure however at 1000 C the RHEED data showed deterioration of the single crystalline structure. We conclude that the substrate itself is temperature dependent and that the oxygen was coming from the sides of the silicon dioxide layer. We propose to evaporate more silicon on the edges of the wafer to eliminate the escape of oxygen. this will allow us to grow single crystal cubic silicon carbide.

Mitchell, Sharanda↗
DOE OSTI2020

Lattice strains and diffraction elastic constants of cubic polycrystals

In situ synchrotron X-ray and neutron diffraction experiments provide a powerful approach to measure lattice strains in bulk polycrystalline materials. They are being increasingly used for quantitative characterization of microscale deformation within and between grains and phases. Here we use a self-consistent micromechanics model to obtain a general analytic solution of the grain-level lattice strains and diffraction elastic constants for a broad class of elastically isotropic polycrystals with cubic crystal symmetry. This analytic solution reveals a direct linear relationship between the reciprocal of the elastic diffraction constant and the orientation index parameter along the direction of any diffraction vector, including tensile loading and transverse directions. The straightforward numerical implementation of this solution provides diffraction elastic constants for 26 representative cubic polycrystals. Finally, analytic solutions of this kind can serve to benchmark in situ diffraction measurements of lattice strains and also facilitate high-throughput studies of microscale stresses and diffraction elastic constants in polycrystalline materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Automated classification of big X-ray diffraction data using deep learning models

Abstract In current in situ X-ray diffraction (XRD) techniques, data generation surpasses human analytical capabilities, potentially leading to the loss of insights. Automated techniques require human intervention, and lack the performance and adaptability required for material exploration. Given the critical need for high-throughput automated XRD pattern analysis, we present a generalized deep learning model to classify a diverse set of materials’ crystal systems and space groups. In our approach, we generate training data with a holistic representation of patterns that emerge from varying experimental conditions and crystal properties. We also employ an expedited learning technique to refine our model’s expertise to experimental conditions. In addition, we optimize model architecture to elicit classification based on Bragg’s Law and use evaluation data to interpret our model’s decision-making. We evaluate our models using experimental data, materials unseen in training, and altered cubic crystals, where we observe state-of-the-art performance and even greater advances in space group classification.

Chemistry↗
DOE OSTI2023

Synthesis, crystal structure, and magnetic properties of CoMoFeAl and related compounds

We have carried out joint theoretical and experimental investigations of three Heusler compounds CoMoFeAl, CoMo 0.5 Fe 1.5 Al, and Co 1.5 Mo 0.5 FeAl. Our first-principle calculations show that all three compounds show either ferro- or ferrimagnetic order with CoMoFeAl and CoMo 0.5 Fe 1.5 Al exhibiting high spin polarization of almost 80%. The investigated samples were prepared using arc melting and high vacuum annealing. All the samples show cubic crystal structure with disorder. The parent compound CoMoFeAl shows a small saturation magnetization of 12 emu/g, and a Curie temperature of 440 K. The other two compounds, namely, Co 1.5 Mo 0.5 FeAl and CoMo 0.5 Fe 1.5 Al, show much higher saturation magnetizations of 62 emu/g and 59 emu/g, and substantially higher Curie temperatures of 950 K and 780 K, respectively.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Finite size corrections to Madelung number

It is customary in the study of ionic crystals to assume that the ions are point charges at their respective lattice sites; the corresponding electrostatic energy of one such ion is reducible to Madelung's form, where the Madelung number has a value of 1.7467. This paper considers the modifications in the electrostatic energy when the atomic finite size is treated in more detail. The results are tabulated as a direct correction to Madelung's number for alkali halide cubic crystals.

Wilson, J. W.↗
DOE OSTI2021

Magnetic Weyl Semimetallic Phase in Thin Films of Eu 2 Ir 2 O 7

The interplay between electronic interactions and strong spin-orbit coupling is expected to create a plethora of fascinating correlated topological states of quantum matter. Of particular interest are magnetic Weyl semimetals originally proposed in the pyrochlore iridates, which are only expected to reveal their topological nature in thin film form. To date, however, direct experimental demonstrations of these exotic phases remain elusive, due to the lack of usable single crystals and the insufficient quality of available films. Here, in this study, we report on the discovery of signatures for the long-sought magnetic Weyl semimetallic phase in (111)-oriented Eu 2 Ir 2 O 7 high-quality epitaxial thin films. We observed an intrinsic anomalous Hall effect with colossal coercivity but vanishing net magnetization, which emerges right below the onset of a peculiar magnetic phase with all-in-all-out (AIAO) antiferromagnetic ordering. The anomalous Hall conductivity obtained experimentally is consistent with the theoretical prediction, likely arising from the nonzero Berry curvature emanated by Weyl node pairs near the Fermi level that act as sources and sinks of Berry flux, activated by broken cubic crystal symmetry at the top and bottom terminations of the thin film.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Valence instability and collapse of ferromagnetism in EuB 6 at high pressures

Despite the simplicity of their cubic crystal lattice, rare-earth hexaborides display complex physical properties including a (long debated) onset of metallization via magnetic polaron formation at T c1 approximate to 15 K preceding ferromagnetic ordering at T c2 approximate to 12 K. Here, in this work, we used applied pressure to tune the interplay between electronic structure and magnetism in EuB6. We probed the magnetism, valence, and structure of EuB 6 under quasi-hydrostatic pressures up to 30 GPa using X-ray techniques. Our findings show evidence for collapse of ferromagnetism above 20 GPa following a monotonic increase of mean Eu valence. While X-ray diffraction measurements in the paramagnetic state at room temperature show that the lattice retains cubic symmetry, a measurable quadrupole interaction seen by time-domain synchrotron Mössbauer spectroscopy suggests a lowering of symmetry associated with magnetic ordering, becoming more prominent across the magnetic transition. The interplay between conduction band electron count and magnetism observed under applied pressure in EuB 6 opens possibilities for fine-tuning metallization and magnetic properties of similar Eu-based semi-metal systems.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1990

Ellipsometric study of cubic SiC

Variable angle spectroscopic ellipsometry (VASE) was applied to cubic SiC. This technique gives absolute values of the refractive index (n) and the extinction coefficient (k) of a substrate and/or a thin film of unknown material. The samples were grown by chemical vapor deposition (CVD) on p-type silicon. The substrate was aligned either on the (001) axis or 1 degree of (001). Several growth temperatures and growth durations were used. The samples were divided into two groups: (1) thick films of order 10 microns grown near optimal conditions of temperature, flow, and gas ratio; and (2) thin films of order 100 A grown at various temperatures. The ellipsometric results for samples in group 1 were analyzed using a two-phase model (substrate and ambient). Results show that for wavelengths in the visible, the refractive index of these CVD samples is equal to that reported for single crystal cubic SiC, within the experimental error, which is on the order of 1 percent. However, the extinction coefficient has a relatively large value, even above the band gap. The absorption is sample dependent and has a broad peak in the visible. The results for samples in group 2 were analyzed using a three-phase model (substrate, film, and ambient). The dielectric functions of the film, deducted from the measured n and k, were further analyzed using the effective medium approximation. The results show that the films contain 30 to 40 vol. percent amorphous silicon, i.e., silicon with only short-range order.

Alterovitz, Samuel A.↗
DOE OSTI2024

Reactive flash sintering and characterization of bulk high entropy nitrides

Over the past decade, numerous high-entropy ceramics have been synthesized, often displaying attractive properties. However, the study on facile preparation of bulk high entropy nitrides (HEN) are limited, despite its broad potential applications. This research demonstrates for the first time rapid fabrication (within ∼6 min) of bulk high-entropy nitrides, especially (Al 0.17 Nb 0.17 Ta 0.17 Ti 0.32 Zr 0.17 )N, from binary nitride powder mixtures using a highly efficient reactive flash sintering (RFS) technique. X-ray diffraction (XRD) shows the HENs from RFS are near single-phase solid solutions with a rock salt crystal structure, while in situ synchrotron study carried out during RFS captured in real time the formation of HEN, which was preserved upon cooling, suggesting thermodynamic stability of the HEN phase, even up to extreme pressure (∼35.6 GPa). Microscopic analyses using SEM, STEM, and EDS reveal decent uniformity for HEN with no obvious segregation of elements, even to submicron scale. Some properties of the obtained bulk HENs are consistent with expectations. For example, their hardness and bulk modulus are close to estimates based on rule-of-mixture (ROM) values from the constituent binary nitrides. Meanwhile, some other measured properties seem to show surprises. For example, the fracture toughness for the HENs (e.g., 7.81 ± 1.40 MPa•m 1/2 or higher) turns out to be more than double of the expected ROM estimates. The significantly improved fracture toughness is attributed to the observed nano-layered structure of the HENs, despite the HEN’s cubic crystal structure and high hardness. In addition, the oxidation resistance shows improvement up till ∼800°C, possibly due to Ta doping that suppress oxygen vacancy formation in the oxide shell, while the 5-metal HEN of (Al 0.17 Nb 0.17 Ta 0.17 Ti 0.32 Zr 0.17 )N displays superconductivity (T c of ∼5–7 K from magnetism and resistivity measurements, slightly lower than ROM estimate), despite insulating property of starting AlN. Furthermore, future study combining experimental investigation using larger samples to confirm the observed increase in fracture toughness and oxidation resistance, theoretical modeling at different length scale, and more detailed structural/chemical characterization, especially at the atomic scale, are all needed to fully understand the inter-relationships between composition, processing, structure, and novel properties for these HENs and the development of related new materials for different applications.

Flash sintering↗