Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “convective”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Non-Newtonian Convection and Compositional Buoyancy: Advances in Modeling Convection and Dome Formation on Europa

Numerical modeling of non-Newtonian convection in ice shows that convection controlled by grain boundary sliding rheology may occur in Europa. This modeling confirms that thermal convection alone cannot produce significant dome elevations. Domes may instead be produced by diapirs initiated by thermal convection that in turn induces compositional segregation. Exclusion of impurities from warm upwellings would allow sufficient buoyancy for icy plumes to account for the observed approximately 100 m topography of domes, provided the ice shell has a small effective elastic thickness (approximately 0.2 to 0.5 km) and contains low eutectic-point impurities at the few percent level.

Pappalardo, R. T.↗
NASA NTRS2004

A Convective Vorticity Vector Associated With Tropical Convection: A 2D Cloud-Resolving Modeling Study

Although dry/moist potential vorticity is a useful physical quantity for meteorological analysis, it cannot be applied to the analysis of 2D simulations. A convective vorticity vector (CVV) is introduced in this study to analyze 2D cloud-resolving simulation data associated with 2D tropical convection. The cloud model is forced by the vertical velocity, zonal wind, horizontal advection, and sea surface temperature obtained from the TOGA COARE, and is integrated for a selected 10-day period. The CVV has zonal and vertical components in the 2D x-z frame. Analysis of zonally-averaged and mass-integrated quantities shows that the correlation coefficient between the vertical component of the CVV and the sum of the cloud hydrometeor mixing ratios is 0.81, whereas the correlation coefficient between the zonal component and the sum of the mixing ratios is only 0.18. This indicates that the vertical component of the CVV is closely associated with tropical convection. The tendency equation for the vertical component of the CVV is derived and the zonally-averaged and mass-integrated tendency budgets are analyzed. The tendency of the vertical component of the CVV is determined by the interaction between the vorticity and the zonal gradient of cloud heating. The results demonstrate that the vertical component of the CVV is a cloud-linked parameter and can be used to study tropical convection.

Gao, Shou-Ting↗
NASA NTRS2024

Growth Rate of Deep Convective System Cloud Shields: Satellite Observations and Km-Scale Radiative Convective Equilibrium Simulations

Deep convection gives rise to large upper level clouds that strongly interact with radiation and are important to the climate energy budget. From an object-oriented perspective, these individual deep cloud systems are characterized by a well depicted cloud shield life cycle, starting with small cloud extents that grow at varying rates before decaying and vanishing. A simple formulation of the growth rate of the cloud shield has been proposed that links together the growth rate on the convective part of the cloud, the mass flux of both the convective and stratiform parts of the cluster and a simple removal sink term (Elsaesser et al., 2022). In this presentation we first show using a suite of satellite observations (infrared from geostationary satellites, GPM radar, etc.) that the functional form of the proposed equation is well suited to quantify the shield growth rate. We then focus on RCE simulations, with deep cloud system objects post processed, to explore the relative role of each term of the growth rate budget. Three different models are used in the same RCEMIP-like configurations. The results show that the budget equation works very well for each model, although the time constants require model-dependent adjustments. We will further show in Vienna the commonalities and the specificities of each model.

Deep convection↗
DOE OSTI2024

Characteristics of Precipitation and Mesoscale Convective Systems Over the Peruvian Central Andes in Multi 5‐Year Convection‐Permitting Simulations

Abstract Using the Weather Research and Forecasting model with two planetary boundary layer schemes, ACM2 and MYNN, convection‐permitting model (CPM) regional climate simulations were conducted for a 6‐year period, including a one‐year spin‐up period, at a 15‐km grid spacing covering entire South America and a nested convection‐permitting 3‐km grid spacing covering the Peruvian central Andes region. These two CPM simulations along with a 4‐km simulation covering South America produced by National Center for Atmospheric Research (NCAR), three gridded precipitation products, and rain gauge data in Peru and Brazil, are used to document the characteristics of precipitation and mesoscale convective systems (MCSs) in the Peruvian central Andes region. Results show that all km‐scale simulations generally capture the spatiotemporal patterns of precipitation and MCSs at both seasonal and diurnal scales, although biases exist in aspects such as precipitation intensity and MCS frequency, size, propagation speed, and associated precipitation intensity. The 3‐km simulation using MYNN scheme generally outperforms the other simulations in capturing seasonal and diurnal precipitation over the mountain, while both it and the 4‐km simulation demonstrate superior performance in the western Amazon Basin, based on the comparison to the gridded precipitation products and gauge data. Dynamic factors, primarily low‐level jet and terrain‐induced uplift, are the key drivers for precipitation and MCS genesis along the east slope of the Andes, while thermodynamic factors control the precipitation and MCS activity in the western Amazon Basin and over elevated mountainous regions. The study suggests model improvements and better model configurations for future regional climate projections.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

Realistic Precipitation Diurnal Cycle in Global Convection-Permitting Models by Resolving Mesoscale Convective Systems

Accurately representing the precipitation diurnal cycle has long been a challenge for global climate models (GCMs). Here we evaluate the precipitation diurnal cycle in the DYAMOND global convection-permitting models (CPMs) and CMIP6 HighResMIP models. Comparison of the high- (25–50 km) and low-resolution (100–250 km) models with parameterized convection in HighResMIP shows that simply increasing model resolution does not noticeably improve the precipitation diurnal cycle. In contrast, CPMs can better capture the observed amplitude and timing of precipitation diurnal cycle. However, the simulated spatial variation of timing in CPMs is smaller than observed, leading to an exaggeration of the spatially averaged diurnal amplitude. The better-simulated precipitation diurnal cycle in the CPMs is tied to mesoscale convective systems (MCSs), which contribute about half of the total precipitation. The observed life cycle of MCSs, including initiation and mature stages, is well captured in the CPMs, leading to a more realistic precipitation diurnal cycle.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

A convective model for turbulent mixing in rotating convection zones

The effects of rotation are included in an analytical model for the convective motions in a plane-parallel layer of an ideal fluid. The turbulent stress tensor, formed by taking products and averages of the various velocity components, is calculated for an arbitrary eddy size and shape. Heuristic formulae presented for determining the size and shape of the dominant eddy then give a fully specified stress tensor. Applications for this stress tensor in problems of stellar internal dynamics, heat flow, scalar diffusion, and dynamo theory are suggested. The resultant stresses tend to produce differential rotation profiles with rapidly rotating equators and interiors. The dynamo activity associated with these convective motions tends to occur near the lower boundary of the convection zone.

Hathaway, D. H.↗
NASA NTRS1985

Deep convection in mesoscale convective systems

A study was undertaken to examine the evolution of radar echoes and lightning attending the convective storms in mesoscale convective systems (MCS) and the relationships between the spatial and temporal evolution of deep convection and the storm environment, precipitation, severe weather, and lightning. The total number of ground discharges ranges from 10,000 to 30,000 over the life cycle of the MCS with peak sustained rates (for up to 10 consecutive hours) in excess of 2000 per hour. The peak lightning activity occurs from 5 to 20 hours after the first storms and anywhere from 7 hours prior to 7 hours after the time of the maximum areal extent of the MCS for very similar synoptic environments. Thus, it appears that mesoscale and sub-synoptic scale mechanisms are responsible for these large temporal variation in lightning activity. In addition, we have found that the lightning rates in MCS's are not related to either the size or the duration of the MCS. Preliminary results suggest that the MCA's with embedded squall lines produce the greatest flash rates.

Goodman, S. J.↗
NASA NTRS1993

Convective Effects During the Physical Vapor Transport Process. II - Thermosolutal Convection

The effect of an inert gas on the diffusive-convective physical vapor transport process is investigated for the case when the temperature gradient is stabilizing, and the concentration gradient destabilizing, for a wide parametric range. When an inert gas is present, the thermal and solutal convection oppose each other. The solutal field is destabilizing while the thermal field and the advective-diffusive flux stabilize the flow field. When the pressure of the inert component is increased, the stabilizing effect of the advective-diffusive flux is decreased; thus, convection becomes more vigorous. The nonlinear dynamics of the flow field here show a transition from quasi-periodic to chaotic state. When both stabilizing mechanisms are present, the flow field shows a transition to a steady state. Toward steady state, growth and amalgamation of rolls occur, which result in an overturning motion. This leads to a superposed flow consisting of one roll and a unidirectional flow. However, when the pressure is increased, the advective-diffusive stability mechanism is decreased. and oscillations of the flow field occur. The low gravity environment is effective at eliminating oscillatory behavior of the flow field and results in uniform temperature and concentration gradients.

Duval, Walter M. B.↗
DOE OSTI2025

A novel closed-form inversion of the convection–diffusion equation for rapid convection, diffusion, and source profile estimation

To simplify and routinize particle transport analysis in fusion devices, a novel closed form linear inversion of the 1-D convection diffusion equation to estimate diffusion and convection profiles D(r ⃗ ), v(r ⃗ ) and source distribution s(r ⃗ ), of a single species from measured data is derived and demonstrated on synthetic data. Profile estimates of D(r ⃗ ), v(r ⃗ ), s(r ⃗ ) and their uncertainties are given as a matrix expression constructed directly from the incoming density data of the transported species in space and time, as well as physics assumptions such as particle conservation and experimental geometry. The derived matrix expression can be applied to a pumped or non-pumped recycling species, or a non-recycling species that is effectively “pumped” by plasma-facing surfaces.

Hinson, Edward [ORNL] (ORCID:000000019713140X)↗
DOE OSTI2025

Performance of Convection-Permitting and Convection-Parameterized Models in Reproducing the Extreme Precipitation Intensity Relationship with Surface Conditions

Here, this study investigates the warm-season extreme precipitation–temperature scaling relationship in CONUS404, a convection-permitting (4 km) Weather Research and Forecasting (WRF) Model simulation over the conterminous United States for the past four decades, and compares it with the WRF-Thermodynamic Global Warming (WRF-TGW) historical simulation at a coarser resolution (12 km) using parameterized convection. We also analyze the NCEP stage IV and NASA Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement (IMERG) datasets as observational benchmarks. We examine how extreme precipitation intensity (EPI) varies with temperature and saturation deficit over representative regions based on hourly data. The stage IV and IMERG data show a similar pattern of EPI variation with temperature and saturation deficit, except that the EPI peak is lower in IMERG than in stage IV. Under dry and hot conditions, EPI decreases too rapidly with elevated saturation deficit in both CONUS404 and WRF-TGW compared to observations, but the performance of CONUS404 is superior to WRF-TGW. When the near-surface atmosphere is saturated or close to saturated, both CONUS404 and WRF-TGW produce higher peak values of EPI relative to the observational references; IMERG exhibits scaling rates close to the Clausius–Clapeyron (C–C) relationship, while CONUS404, WRF-TGW, and stage IV all demonstrate super-C–C scaling behaviors. Despite marked warming over the past four decades, in both CONUS404 and WRF-TGW, the scaling relationship between EPI and temperature in a saturated atmosphere remains stable and robust. This indicates a strong potential for the EPI–temperature scaling rate under saturation to be used as an emergent constraint in reducing uncertainties of future extreme precipitation projection.

Atmosphere↗
NASA NTRS1975

Space processing convection evaluation - G-jitter convection of confined fluids in low gravity

G-jitter convection, caused by time-varying accelerations imparted on a heated container of fluid in low gravity, is investigated analytically. The mathematical model used is constructed from the Navier-Stokes equations which are solved with a finite-difference method on a digital computer. Results are presented for typical space processing configurations and anticipated g-jitter levels, with emphasis on sounding rocket applications. The calculations indicate that g-jitter can cause significant temperature oscillations, increase or decrease local heat transfer and produce oscillatory convective flow patterns. These factors can have significant effects on important processes such as crystal growth (banding, for example) and separation techniques.

Spradley, L. W.↗
NASA NTRS1979

Stellar convection 2: A multi-mode numerical solution for convection in spheres

The convective flow of a self gravitating sphere of Boussinesq fluid for small Reynolds and Peclet numbers is numerically determined. The decomposition of the equations of motion into modes is reviewed and a relaxation method is developed and presented to compute the solutions to these equations. The stable equilibrium flow for a Rayleigh number of 10 to the 4th power and a Prandtl number of 10 is determined. The 2 and 3 dimensional spectra of the kinetic and thermal energies and the convective flux as a function of wavelengths are calculated in terms of modes. The anisotropy of the flow as a function of wavelength is defined.

Marcus, P. S.↗
NASA NTRS1980

Stellar convection. II - A multimode numerical solution for convection in spheres

A stable, equilibrium solution for convection in a self-gravitating sphere of Boussinesq fluid was computed by using a modal analysis in which the theta, phi dependence of the fluid is expanded in a set of 168 spherical harmonics. The temperature, velocity, and convective flux of the fluid as well as the kinetic and thermal energy spectra as functions of wavelength are computed. The spectra are found to be in agreement with both experimental observations and analytic scaling laws. The dynamics of the energy cascade is examined by computing the ratio of the amount of energy dissipation at a particular wavelength to the amount of energy produced at that same wavelength. It is found that there is only a slight cascade of kinetic energy to smaller wavelengths but a large cascade of thermal energy.

Marcus, P. S.↗
NASA NTRS1981

The development of convective instability, wind shear, and vertical motion in relation to convection activity and synoptic systems in AVE 4

Data from the Fourth Atmospheric Variability Experiment were used to investigate conditions/factors responsible for the development (local time rate-of-change) of convective instability, wind shear, and vertical motion in areas with varying degrees of convective activity. AVE IV sounding data were taken at 3 or 6 h intervals during a 36 h period on 24-25 April 1975 over approximately the eastern half of the United States. An error analysis was performed for each variable studied.

Davis, J. G.↗
NASA NTRS1984

Magnetic fields in the radiative interior of stars. I Thermal shadows and forced convection. II - Forced convection and the Li-7 abundance

A theoretical model is developed for thermal shadows of magnetic inhomogeneities and their effects in the radiative cores of stars such as the sun. It is shown that the shadows cause a slight decrease of gas pressure, thereby lowering the opacity and raising the effective heat transport. The shadows produced by the inhomogeneities induce thermal gradients and therefore forced convection. If the field strength is at least 400,000 gauss partial Li-7 depletion will occur due to destruction in convection-dominated thermonuclear reactions. The scale of the field would need to be 30,000 km.

Parker, E. N.↗
NASA NTRS1989

Observed structural variability of deep moist convection within a mesoscale convective system

Some radar observations of the convective cloud structure within and around a developing mesoscale convective system (MCS), which attained an eventual horizontal dimension of approximately 100 by 200 km, are reported. Similarities in cloud structure within and outside the MCS include a downshear tilt of the cloud precipitation core and generation of new cells toward the direction of cloud motion and parallel to the major axis of the cloud line. The systematic difference in the longevity and intensity of the clouds is examined.

Knupp, Kevin R.↗
NASA NTRS2000

Comments on "The Sensitivity Study of Radiative-Convective Equilibrium in the Tropics with a Convective Resolving Model"

In general, there are two broad scientific objectives when using cloud resolving models (CRMs or cloud ensemble models-CEMs) to study tropical convection. The first one is to use them as a physics resolving models to understand the dynamic and microphysical processes associated with the tropical water and energy cycles and their role in the climate system. The second approach is to use the CRMs to improve the representation of moist processes and their interaction with radiation in large-scale models. In order to improve the credibility of the CRMs and achieve the above goals, CRMs using identical initial conditions and large-scale influences need to produce very similar results. Two CRMs produced different statistical equilibrium (SE) states even though both used the same initial thermodynamic and wind conditions. Sensitivity tests to identify the major physical processes that determine the SE states for the different CRM simulations were performed. Their results indicated that atmospheric horizontal wind is treated quite differently in these two CRMs. The model that had stronger surface winds and consequently larger latent and sensible heat fluxes from the ocean produced a warmer and more humid modeled thermodynamic SE state. In addition, the domain mean thermodynamic state is more unstable for those experiments that produced a warmer and more humid SE state. Their simulated wet (warm and humid) SE states are thermally more stable in the lower troposphere (from the surface to 4-5 km in altitude). The large-scale horizontal advective effects on temperature and water vapor mixing ratio are needed when using CRMs to perform long-term integrations to study convective feedback under specified large-scale environments. In addition, it is suggested that the dry and cold SE state simulated was caused by enhanced precipitation but not enough surface evaporation. We find some problems with the interpretation of these three phenomena.

Tao, W.-K.↗