Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “confining effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Mechanical and poroelastic behavior of porous tuff under drained and undrained conditions

A series of drained and undrained water-saturated constant mean-stress tests were performed to investigate the strength, elasticity, and poroelastic response of a water-saturated high porosity nonwelded tuff. Drained strengths are found to increase with increasing effective confining pressures. Elastic moduli increase with increasing mean stress. Undrained strengths are small due to development of high pore pressures that generate low effective confining pressures. Skempton’s values are pressure dependent and appear to reflect the onset of inelastic deformation. Permeabilities decrease after deformation from ~ 10 –14 to ~ 10 –16 m 2 and are a function of the applied confining pressure. Deformation is dominated by pore collapse, compaction, and intense microfracturing, with the undrained tests favoring microfracture-dominant deformation and the drained tests favoring compaction-dominant deformation. These property determinations and observations are used to develop/parameterize physics-based models for underground explosives testing.

58 GEOSCIENCES↗
NASA NTRS1980

The effects of confining pressure and stress difference on static fatigue of granite

Samples of Barre granite have been creep tested at room temperature at confining pressures up to 2 kbar. Experimental procedures are described and the results of observations and analysis are presented. It is noted that the effect of pressure is to increase the amount of inelastic deformation the rock can sustain before becoming unstable. It is also shown that this increased deformation is due to longer and more numerous microcracks.

Kranz, R. L.↗
DOE OSTI2024

Learning a general model of single phase flow in complex 3D porous media

Modeling effective transport properties of 3D porous media, such as permeability, at multiple scales is challenging as a result of the combined complexity of the pore structures and fluid physics—in particular, confinement effects which vary across the nanoscale to the microscale. While numerical simulation is possible, the computational cost is prohibitive for realistic domains, which are large and complex. Although machine learning (ML) models have been proposed to circumvent simulation, none so far has simultaneously accounted for heterogeneous 3D structures, fluid confinement effects, and multiple simulation resolutions. By utilizing numerous computer science techniques to improve the scalability of training, we have for the first time developed a general flow model that accounts for the pore-structure and corresponding physical phenomena at scales from Angstrom to the micrometer. Using synthetic computational domains for training, our ML model exhibits strong performance (R 2 = 0.9) when tested on extremely diverse real domains at multiple scales.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Learning a General Model of Single Phase Flow in Complex 3D Porous Media

Modeling effective transport properties of 3D porous media, such as permeability, at multiple scales is challenging as a result of the combined complexity of the pore structures and fluid physics—in particular, confinement effects which vary across the nanoscale to the microscale. While numerical simulation is possible, the computational cost is prohibitive for realistic domains, which are large and complex. Although machine learning (ML) models have been proposed to circumvent simulation, none so far has simultaneously accounted for heterogeneous 3D structures, fluid confinement effects, and multiple simulation resolutions. By utilizing numerous computer science techniques to improve the scalability of training, we have for the first time developed a general flow model that accounts for the pore-structure and corresponding physical phenomena at scales from Angstrom to the micrometer. Using synthetic computational domains for training, our ML model exhibits strong performance (R 2 = 0.9) when tested on extremely diverse real domains at multiple scales.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Demonstration of improvement of energy conversion rate from kJ PW laser to protons with electron confinement

Kilojoule-class relativistic intensity lasers can produce energetic protons with high energy conversion efficiencies in the interaction with a thin foil target. Using the national ignition facility advanced radiographic capability (NIF-ARC) laser, we demonstrated an enhancement of energy conversion from laser to protons by the effective confinement of fast electrons in the laser spot by random kicks from the self-excited field. The number of fast electrons was increased by 4.6 times by increasing the ratio of the laser spot size to the foil thickness to strengthen the confinement effect. The energy conversion efficiency from laser to protons increases approximately linearly with the enhancement of the number of fast electrons. The conversion rate for protons with energies above 8 MeV was 1.8 %. The result leads to high efficiency proton acceleration which is beneficial in applications, such as proton radiography and plasma heating in laser fusion.

Physics↗
DOE OSTI2026

Effects of confinement and pressure on the structure and dynamics of carbon dioxide in silica slit pores

An understanding of carbon dioxide fluid properties within geological mesopores is important in applications ranging from carbon sequestration to shale oil recovery. Here, a molecular dynamics study is presented that aims to shed light on these systems by simulation of CO 2 fluid confined in β-cristobalite silica slit pores with different pore widths and pressure conditions. The weakly associating nature of carbon dioxide leads to little difference in structural and interfacial dynamical properties for different pore sizes and pressures. Rather, the behavior is found to be dominated by the entropic effects, namely, how the CO 2 organizes next to the silica surface. The CO 2 self-diffusion coefficient shows the strongest pore size dependence. It is strongly diminished in small pores and does not reach the bulk fluid value even in 6 nm pores. It also decreases with pressure, yielding an activation volume that increases with pore size. These results provide new insight into the behavior of a compressible fluid in nanoscale confinement.

Godahewa, Sahan M. [Univ. of Kansas, Lawrence, KS ↗
DOE OSTI2021

Enhanced Catalysis under 2D Silica: A CO Oxidation Study

Interfacially confined microenvironments have recently gained attention in catalysis, as they can be used to modulate reaction chemistry. The emergence of a 2D nanospace at the interface between a 2D material and its support can promote varying kinetic and energetic schemes based on molecular level confinement effects imposed in this reduced volume. We report on the use of a 2D oxide cover, bilayer silica, on catalytically active Pd(111) undergoing the CO oxidation reaction. We “uncover” mechanistic insights about the structure-activity relationship with and without a 2D silica overlayer using in situ IR and X-ray spectroscopy and mass spectrometry methods. We find that the CO oxidation reaction on Pd(111) benefits from confinement effects imposed on surface adsorbates under 2D silica. Finally, this interaction results in a lower and more dispersed coverage of CO adsorbates with restricted CO adsorption geometries, which promote oxygen adsorption and lay the foundation for the formation of a reactive surface oxide that produces higher CO 2 formation rates than Pd alone.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Enhanced Catalysis under 2D Silica: A CO Oxidation Study

Abstract Interfacially confined microenvironments have recently gained attention in catalysis, as they can be used to modulate reaction chemistry. The emergence of a 2D nanospace at the interface between a 2D material and its support can promote varying kinetic and energetic schemes based on molecular level confinement effects imposed in this reduced volume. We report on the use of a 2D oxide cover, bilayer silica, on catalytically active Pd(111) undergoing the CO oxidation reaction. We “uncover” mechanistic insights about the structure–activity relationship with and without a 2D silica overlayer using in situ IR and X‐ray spectroscopy and mass spectrometry methods. We find that the CO oxidation reaction on Pd(111) benefits from confinement effects imposed on surface adsorbates under 2D silica. This interaction results in a lower and more dispersed coverage of CO adsorbates with restricted CO adsorption geometries, which promote oxygen adsorption and lay the foundation for the formation of a reactive surface oxide that produces higher CO 2 formation rates than Pd alone.

Eads, Calley N.↗
DOE OSTI2026

Toward Hydrogen Isotope Separations through Strong Hydrogen Adsorption at Open Copper(I) Sites in an Ultramicroporous Metal-Organic Framework

Metal-organic frameworks with coordinatively unsaturated metal sites (open metal sites) capable of engaging in orbital interactions with pi-acidic gases are of interest for enabling ambient-temperature gas separations, such as hydrogen isotope separations. In view of the weakly pi-acidic nature of H2, we sought to strengthen pi-backbonding-mediated H2 adsorption through pore confinement effects. Toward that end, we synthesized and characterized the ultramicroporous metal-organic framework CuxZn5-xCl4-yHz(bbta)3 (CuIZn-MFU-4; H2bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole), featuring pi-basic trigonal pyramidal CuI sites that reside within 7 A of one another at their closest. Gas adsorption measurements reveal an H2 adsorption enthalpy of -38 kJ/mol, exceeding that of the larger-pore analog (CuIZn-MFU-4l; -33 kJ/mol) and representing the strongest H2 adsorption yet achieved in a metal-organic framework. The stronger H2 adsorption in CuIZn-MFU-4 is attributed to a combination of pore confinement effects and the increased ..sigma..-accepting nature of the CuI sites caused by a more electron-withdrawing bbta2- linker, as supported by structural, spectroscopic, and computational evidence. With the strongest H2 adsorption, equilibrium isotope effects in CuIZn-MFU-4 lead to a D2/H2 selectivity (as estimated by ideal adsorbed solution theory) of 1.35 even at 298 K, approaching the values reported below 200 K for conventional porous materials.

08 HYDROGEN↗
DOE OSTI2021

Constraint and size effects in confined layer plasticity

Plane strain finite element analyses are used to model the experiments for a thin metal layer confined between elastic solids. Here, the thin metal layer undergoes elastic-plastic deformations, here modelled by strain gradient plasticity, while the rest of the solid deforms only elastically. Plane strain is assumed and finite strains are accounted for. The microscopic boundary condition at the band interface is initially taken to be zero plastic strain increment, but plastic straining at the interface is allowed when the plastic strain gradient at the interface has exceeded a critical value. When the narrow metal band is inclined 45° relative to the direction of compression of the solid simple shear develops in the band and predictions are rather similar to those of a one-dimensional analysis for an infinite band. For a band at 90° the elastic parts give significant constraint on plastic flow, the stress fields are non-uniform along the band and the average nominal compressive stress shows strong sensitivity to the layer thickness and to the width of the specimen. Remarkably good qualitative, and in some cases quantitative, agreement is found with the experimental observations. Considering also other band angles, both the average nominal shear and compressive stress show variations with the angle.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of Confinement on the Density and Diffusivity of Organic Molecules in Single-Digit Nanopores Relative to Bulk Fluid Behavior

Prediction of fluid properties in microporous and mesoporous confinement is non-trivial due to distinct influences from pore surface functionality and shape and fluid molecular characteristics. The vast majority of literature focuses nearly exclusively on a small number of components that are generally low molecular weight gases and vapors. Missing are studies that utilize a relatively large number of compounds that are liquid at ambient conditions to probe the impact of molecular shape and size on confined fluid properties. Such materials are of great interest in the extraction of oil and gas from shale reservoirs or for the design of selective adsorbents for chemical separation. In this work, we reveal non-intuitive relationships that emerge when comparing bulk fluid properties to those when confined in amorphous silica single-digit nanopores (approx. 5 nm SBA-15), specifically the confined density and self-diffusivity. A counterintuitive result was obtained where larger molecules had relatively faster self-diffusivities; however, this behavior was revealed to be caused by these larger compounds exhibiting a relatively low density when confined. As the prediction of confined fluid properties impacts a diversity of disciplines, the results highlight the need for additional investigations where consistent and large-scale experimental procedures are employed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface immobilized copper(i) diimine photosensitizers as molecular probes for elucidating the effects of confinement at interfaces for solar energy conversion

Heteroleptic copper(I) bis(phenanthroline) complexes with surface anchoring carboxylate groups have been synthesized and immobilized on nanoporous metal oxide substrates. The species investigated are responsive to the external environment and this work provides a new strategy to control charge transfer processes for efficient solar energy conversion.

14 SOLAR ENERGY↗