SEARCH · Engineering Papers

Results for “complex oxide interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Nonprotective Alumina Growth in Sulfur-Doped NiAl(Zr)

The 1200 C oxidation behavior of NiAl was examined at various levels of sulfur and zirconium dopants to test the possibility of a critical S/Zr ratio required for adhesion. Cyclic furnace testing for 200 1 -hr cycles and interrupted testing for 500 hr were used as screening tests. Pure NiAl and NiAl(Zr) with 0. 14 at.% Zr were chosen as model base compositions; they exhibited normal, slow-growing scales (3 Mg/sq cm) with excellent adhesion for the Zr-doped alloys. NiAl with about 120 ppma S exhibited a substantial weight loss (-20 Mg/sq cm) in cyclic tests and a very large weight gain (+60 Mg/sq cm) in interrupted tests. The major surface phase remained as alpha -Al2O3. Sulfur doping the NiAl(Zr) alloy caused massive weight gains of 80 - 100 Mg/sq cm, swelling, cracking, and nearly complete conversion into NiAl2O4, and alpha- Al2O3. The initial objective of determining critical S/Zr ratios for adhesion was therefore unattainable. Initiation of the catastrophic attack was examined after a 10 hr exposure, revealing a few sites of broad, raised, and cracked ridges. In cross-section, the ridges appeared as modular intrusions, with a complex, fractal, oxide-metal interface. They were primarily alumina (with occasional entrapped islands of NiAl2O4 or pure Ni metal). They possessed a unique microstructure consisting of 0.3 microns lamellae, separated by 0.1 microns open channels. This allowed for rapid growth controlled by gaseous diffusion. The microstructure is discussed in terms of SO2 evolution and a sulfur-driven de-passivation process.

Smialek, James L.↗

DOE OSTI2021

Adsorption and activation of CO 2 on Pt/CeOx/TiO 2 (110): Role of the Pt-CeO x interface

The adsorption and dissociation of CO 2 on TiO 2 (110), CeO x /TiO 2 (110) and Pt/CeO x /TiO 2 (110) surfaces has been examined using Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS). The substrates under study exhibited different degrees of complexity which were tested for the binding of the adsorbate and the cleavage of C-O bonds. The surfaces were prepared by depositing CeO x (0.1 ML) onto TiO 2 (110) to form a mixed oxide support, onto which Pt nanoparticles (0.2 ML) were deposited. This configuration yields a complex set of interfaces between metal and oxides and we have systematically titrated the active role of each component (Pt 4f, Ce 3d and Ti 2p regions) and the arising surface intermediates (C 1s and O 1s regions). CO 2 barely bonds to stoichiometric TiO 2 (110). It heals oxygen vacancies of this oxide surface (CO 2,gas → CO gas + O a ) and does not form stable carbonates. A stable carbonate was seen upon adsorption of CO 2 on CeO x /TiO 2 (110) and on this type of substrate the adsorbate also removed O vacancies leading to the oxidation of Ti 3+ and Ce 3+ sites. Pt nanoparticles dispersed on CeO x /TiO 2 (110) were highly effective for the binding and dissociation of CO 2 , with the formation of CO 3 , CO, C and CH x species on the Pt/CeO x /TiO 2 (110) system. The results of theoretical calculations based on density-functional theory (DFT) show that Pt/CeOx/TiO2(110) binds CO2 much stronger than surfaces of bulk platinum {(111), (100), (110)} or other late transition metals. On a Pt-CeO x interface, the molecule adsorbs with a bent configuration (~ 130° O-C-O bond angle) and with a substantial elongation (~ 0.1 Å) of the C-O bonds, facilitating its transformation into high value chemicals.

36 MATERIALS SCIENCE↗

DOE OSTI2020

New Quantum Phenomena by Combining 2D Materials with Complex Oxides

This project focused on forming clean interfaces between exfoliated 2D materials and epitaxial oxides with the goal of determining the extent to which the electronic and magnetic properties of the former are influenced by the latter. Clear effects were observed in both device structures for which electronic transport properties were measured and unpatterned interfaces interrogated by polarized light to determine magnetic dichroic response. This work resulted in one paper already published and two others to be written, pending the outcome of ongoing experiments and theoretical calculations

36 MATERIALS SCIENCE↗

DOE OSTI2020

Hydrogen migration at restructuring palladium–silver oxide boundaries dramatically enhances reduction rate of silver oxide

Heterogeneous catalysts are complex materials with multiple interfaces. A critical proposition in exploiting bifunctionality in alloy catalysts is to achieve surface migration across interfaces separating functionally dissimilar regions. Herein, we demonstrate the enhancement of more than 10 4 in the rate of molecular hydrogen reduction of a silver surface oxide in the presence of palladium oxide compared to pure silver oxide resulting from the transfer of atomic hydrogen from palladium oxide islands onto the surrounding surface formed from oxidation of a palladium-silver alloy. The palladium-silver interface also dynamically restructures during reduction, resulting in silver-palladium intermixing. This study clearly demonstrates the migration of reaction intermediates and catalyst material across surface interfacial boundaries in alloys with a significant effect on surface reactivity, having broad implications for the catalytic function of bimetallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2018

Influence of Chemistry and Misfit Dislocation Structure on Dopant Segregation at Complex Oxide Heterointerfaces

Complex oxide heterostructures and thin films have emerged as promising candidates for diverse applications. Lattice mismatch between the two oxides lead to the formation of misfit dislocations, which influence vital material features. Trivalent dopant segregation to misfit dislocations at semi-coherent oxide heterointerfaces, while not well understood, is anticipated to impact interface-governed properties. Atomistic simulations elucidating the influence of misfit dislocations on dopant segregation at SrTiO 3 /MgO heterointerfaces are reported. SrO- and TiO 2 -terminated interfaces that have differing misfit dislocation structure were considered for trivalent dopants segregation. At SrO-terminated interface, dopants tend to segregate toward but not precisely to the heterointerface, whereas at TiO 2 -terminated interface, dopants exhibit a thermodynamic preference to accumulate at the heterointerface. Most favorable segregation sites at SrO-terminated interface are located within the coherent terrace, whereas those at TiO 2 -terminated interface are at misfit dislocation intersections. Atomic layer chemistry and the resulting misfit dislocation structure at the heterointerface, along with concomitant strain at the heterointerface due to mismatched dopants, play a critical role in influencing the observed trends for dopant segregation. Overall, the present results offer a fundamental atomic scale perspective of dopant behavior at semi-coherent complex oxide heterointerfaces and the interplay between dopant chemistry, interface chemistry, and misfit dislocation structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Probing vacancy behavior across complex oxide heterointerfaces

Oxygen vacancies ( V O ● ● ) play a critical role as defects in complex oxides in establishing functionality in systems including memristors, all-oxide electronics, and electrochemical cells that comprise metal-insulator-metal or complex oxide heterostructure configurations. Improving oxide-oxide interfaces necessitates a direct, spatial understanding of vacancy distributions that define electrochemically active regions. We show vacancies deplete over micrometer-level distances in Nb-doped SrTiO 3 (Nb:SrTiO 3 ) substrates due to deposition and post-annealing processes. We convert the surface potential across a strontium titanate/yttria-stabilized zirconia (STO/YSZ) heterostructured film to spatial (<100 nm) vacancy profiles within STO using ( T = 500°C) in situ scanning probes and semiconductor analysis. Oxygen scavenging occurring during pulsed laser deposition reduces Nb:STO substantially, which partially reoxidizes in an oxygen-rich environment upon cooling. These results (i) introduce the means to spatially resolve quantitative vacancy distributions across oxide films and (ii) indicate the mechanisms by which oxide thin films enhance and then deplete vacancies within the underlying substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Understanding Adsorption and Reactions at Aqueous Oxide Interfaces with Neural Network Potential Molecular Dynamics

Chemical processes at metal oxide−water interfaces are of central importance in geochemistry, biology, and energy technologies. A better understanding of these processes would allow us to make a significant step toward optimizing and controlling them, which could in turn lead to broader impacts. Computational modeling is indispensable to accomplishing this task because complexity and disorder often make it difficult to extract atomistic information from experiments. Balancing computational cost and accuracy, simulation schemes based on efficient machine learning representations of the potential energy surface (PES) predicted by ab initio calculations have become increasingly popular over the past decade. In particular, several studies have demonstrated the ability of machine learning models to accurately reproduce the complex ab initio PESs of aqueous oxide interfaces, allowing simulations of systems and processes that are not accessible with ab initio methods. In this Account, we review our recent efforts to understand adsorption processes and reactions at aqueous oxide interfaces using deep potential molecular dynamics (DPMD), a simulation scheme employing deep neural networks (DNNs), which has proven to be quite successful in accurately describing many different systems in the condensed phase. After summarizing the DPMD methodology, we first review our work on the acid−base chemistry of oxide surfaces in contact with water, a fundamental characteristic that controls proton transfer and surface charge at the interface. We focus on the aqueous interface of rutile IrO 2 , an oxide material thus far considered the best catalyst for the oxygen evolution reaction (OER). We show that this interface is characterized by a large fraction of dissociated water and a strong Brønsted acidity of the surface sites, in good agreement with the experimentally measured value of the point of zero proton charge. In our second example, we investigate how the adsorption of organic species from ambient air or water affects the structure and wettability of the aqueous interfaces of TiO 2 , a prototypical photocatalytic material. This is a question that is relevant to understanding the UV-induced hydrophilicity of TiO 2 surfaces, a property at the basis of self-cleaning windows and related applications. Specifically focusing on formic and acetic acids, the two most common atmospheric organic acids, our simulations reveal that these acids control the wettability of TiO 2 largely through acid−base chemistry at the interface rather than chemisorption on the oxide surface, a finding that could help improve the design of self-cleaning surfaces and photocatalytic devices. Finally, we review our recent study of methanol at TiO 2 −water interfaces, a system whose interest is largely motivated by the role of methanol in enhancing photocatalytic hydrogen evolution on TiO 2 . Our simulations provide mechanistic insights into the coupled roles of the organic adsorbate and water at the TiO 2 interface, with implications for how methanol enhances the activity of H 2 evolution.

adsorption↗

DOE OSTI2023

Charge trapping at Al/Al 2 ⁢O 3 interface facilitates hydrogen-induced superabundant metal vacancy formation

Hydrogen is a ubiquitous impurity that deteriorates the metal/oxide interface, causing challenges such as current leakage and blistering. Here, in this work, we uncover the mechanisms behind hydrogen-induced damage at the prototypical Al/A⁢l 2 ⁢O 3 interface. The precursor that we identify is charge trapping at the interface, which facilitates hydrogen segregation to the interface plane as H – . Presence of hydrogen increases aluminum vacancy concentration at the interfacial metal and oxide planes. Each Al vacancy can trap multiple hydrogen atoms. As a result, the interfacial aluminum vacancy and hydrogen concentrations increase by orders of magnitude. Additionally, hydrogen behaves as an n-type dopant and increases electronic conductivity at the oxide layer adjacent to the interface by forming H + , and the [V Al –H] complex is the predominant defect at this layer. These findings provide the precursor mechanisms of hydrogen-induced damage at the metal-oxide interfaces and have implications for advancing Al/A⁢l 2 ⁢O 3 –based coatings and electronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Interface creation on a mixed-terminated perovskite surface

In the field of complex oxide heterostructures, understanding of the initial substrate surface can be critical to fundamental studies regarding the development of emergent properties at the film–substrate interface. For this reason, a considerable amount of effort has gone into the development of techniques to achieve surfaces with single termination for a variety of perovskite single crystals. However, a decisive understanding of how an interface is created when epitaxial growth occurs on a mixed terminated surface remains lacking. Employing in situ synchrotron X-ray scattering during thin film growth by molecular beam epitaxy, we investigate the initial stages of growth on (LaAlO 3 )(Sr 2 AlTaO 6 ) (001) substrates with mixed termination. Using LaNiO 3 as a model system, we find that the surface layers of the substrate restructure during deposition such that while a NiO 2 monolayer is weakly bound, a LaO monolayer bonds strongly, effectively incorporating with (Al, Ta)O 2 from the surface and forming a La(Al, Ta)O 3 ultrathin film.  With regard to the synthesis of high-quality complex oxide heterostructures, it is important that the substrate meet an array of criteria related to the crystal structure, lattice parameter, thermodynamic properties, electrical and optical properties, and so on. In particular, the surface of the substrate should be atomically smooth and exhibit the step-terrace structure ideal for epitaxial thin film growth. Perovskite oxides with the formula ABO 3 have two possible (001) surfaces: AO (A-site termination) and BO 2 (B-site termination). The ability to consistently achieve one of these surface terminations on SrTiO 3 , i.e., TiO 2 , has helped SrTiO 3 become the predominant oxide in the field.

36 MATERIALS SCIENCE↗

DOE OSTI2019

High-Temperature Oxidation of Stellite 12 Hardfacings: Effect of Mo on Characteristics of Oxide Scale

This study aims to understand the oxide scale formation on the surfaces of commercial and Mo (10 wt.%)-modified Stellite 12 hardfacings deposited on 4140 steel. For this purpose, samples of the hardfacings were isothermally oxidized in air at various temperatures in between 500 and 900 °C for 30 h. As a result of changes in the microstructure upon Mo addition, about 50% higher mass gain at all oxidation temperatures was observed. The characteristics of the developed oxide scales were examined by utilizing Raman spectroscopy, scanning electron microscopy and x-ray diffraction analysis. The oxide scale formed over Stellite 12 consisted of CoO-, Co{sub 3}O{sub 4-} and Cr{sub 2}O{sub 3}-type oxides, while additionally CoMoO{sub 4}-type complex oxide was detected on Mo-modified hardfacing, more likely at the alloy–scale interface. On the basis of findings of isothermal oxidation tests, the formation mechanisms of this complex oxide imposing better wear resistance as reported in our previous studies were explained during high-temperature wear testing, i.e., dynamic oxidation conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Exploring possible ferromagnetism of the LaAl O 3 / SrTi O 3 interface

We report on extensive investigations of magnetism at the n -type LaAl O 3 / SrTi O 3 interface performed by utilizing a spectrum of local and integrative analytical techniques: Scanning superconducting quantum interference device microscopy, polar Kerr magnetometry, ferromagnetic resonance, and magnetic torque magnetometry. The samples originated from the same wafers. For nominally fully oxidized samples, we find that the mere presence of the conducting interface does not induce magnetism to values exceeding already present magnetic signals originating from the substrates, irrespective of the measurement technique. With the controlled introduction of oxygen vacancies, however, the different analytical techniques with their inherently different sensitivities and potential interactions with possible magnetic moments in the samples yield different results concerning the existence of magnetism. These unexpected differences obtained with the various measurement techniques are a possible source of the disagreement in the literature about the existence of ferromagnetism at LaAl O 3 / SrTi O 3 interfaces.

36 MATERIALS SCIENCE↗

DOE OSTI2020

In situ , in vivo , and in operando imaging and spectroscopy of liquids using microfluidics in vacuum

This review offers a succinct overview of the development of a vacuum-compatible microfluidic reactor system for analysis at the liquid vacuum interface (SALVI), and its diverse applications in in situ, in vivo, and in operando imaging of liquid surfaces as well as the air-liquid (a-l), liquid-liquid (l-l), and solid-liquid (s-l) interfaces in the past decade. SALVI is one of the first microfluidics-based reactors that has enabled direct analysis of volatile liquids in vacuum surface tools such as scanning electron microscopy (SEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Its integration into ambient and vacuum spectroscopy and microscopy is illustrated. Several applications are highlighted including (1) imaging nanoparticles in liquid using in situ SEM; (2) mapping the evolving l-l interface using in situ x-ray absorption spectroscopy and ToF-SIMS; (3) following complex a-l interfacial oxidation reaction products using in situ ToF-SIMS; (4) capturing biological interfaces of cells and microbes via in vivo multimodal and correlative imaging; and (5) monitoring the dynamic solid electrode and liquid electrolyte interface using in operando molecular imaging. Finally, outlook and recommendations are presented. Besides showing the holistic information volume obtained by real-time multiplexed imaging, this review intends to convey the importance of tool development in revolutionizing surface and interface analysis using vacuum platforms previously limited to solid surfaces. Microfluidics is manifested to be not limited to ambient conditions in many examples in this review. Moreover, fundamental interfacial phenomena underpinning mass and charge transfer can now be pursued in real time via innovated chemical imaging and spectroscopy.

42 ENGINEERING↗

DOE OSTI2020

Electron Trapping and Ion Leaching at the Li-Modified Quartz–Water Interface

Electrons and ions at metal oxide-water interfaces have a critical role in many phenomena and applications, thus making their properties of considerable interest. We here investigate the behavior of a lithium impurity at the water interface with Li-doped SiO 2 using hybrid density functional based ab initio molecular dynamics simulations. We find that the excess electron donated by the lithium dopant localizes on a surface silicon atom and is partially solvated at the aqueous interface. While the position of the excess electron does not change during our ~60 ps simulation, the lithium cation diffuses from its initial position in the SiO 2 subsurface toward the interface and eventually leaches out of the oxide surface and becomes solvated by four water molecules, forming an aqueous Li+- electron complex at the interface. The degree of interaction between the localized electron and the lithium ion controls not only the energy level of the excess electron but also the extent of structural distortion and hydrogen-bonding at the interface. The results of our study can be relevant for understanding the initial stages of glass corrosion, where alkali ions are leached from the surface region by interactions with water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Asymmetric Lattice Disorder Induced at Oxide Interfaces

Control of order-disorder phase transitions is a fundamental materials science challenge, underpinning the development of energy storage technologies such as solid oxide fuel cells and batteries, ultra-high temperature ceramics, and durable nuclear waste forms. At present, the development of promising complex oxides for these applications is hindered by a poor understanding of how interfaces affect lattice disordering processes and defect transport. Here we explore the evolution of local disorder in ion-irradiated La 2 Ti 2 O 7 /SrTiO 3 thin film heterostructures using a combination of high-resolution scanning transmission electron microscopy (STEM), position-averaged convergent beam electron diffraction (PACBED), electron energy loss spectroscopy (STEM-EELS), and ab initio theory calculations. We observe highly non-uniform lattice disordering driven by asymmetric oxygen vacancy formation across the interface. Our calculations indicate that this asymmetry results from differences in the polyhedral connectivity and vacancy formation energies of the two interface components, suggesting ways to manipulate lattice disorder in functional oxide heterostructures.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2022

Oxidation Behavior and Property Degradation of Nuclear Graphites

During its multidecade operation in the core of nuclear reactors, graphite components are subjected to aggressive and continuous exposure to a high field of ionizing and neutron irradiation, high temperature, and various types of present and postulated chemical attacks. High density, high crystallinity polygranular synthetic graphite is unique among other materials for its extraordinary capacity of resisting and adapting to the aggression inflicted by high temperature, high energy neutron bombardment and ionizing gamma radiation. But, as a carbonaceous material, even though of very high purity, graphite is reactive towards common oxidizing agents: oxygen, carbon dioxide, water. Safe operation of HTGRs relies, among other aspects, on engineered safeguard systems for efficient and continuous protection of graphite components against oxidation. Graphite oxidation behavior was, and continues to be, an important direction of theoretical and experimental research, engineering analyses, models and simulations, and design and safety regulations. The avalanche of publications, reports, experimental data, computer codes, and regulatory documents related to oxidation behavior of nuclear graphite is now accelerating to new levels, prompted by the increased interest for nuclear energy as a clean, carbon-free energy source. Even though public’s perception of nuclear energy advantages may still be influenced by the memories of past accidents of nuclear reactors from generations II and III, the community of informed scientists and engineers, regulators and statemen knows that generation IV of nuclear reactors is designed at very high safety standards, doubled by great advances of scientific knowledge and technological progress. One of routes of these recent advances is directed at better understanding of graphite oxidation behavior, its relationship with graphite manufacturing and microstructural properties, along with the effects of various environmental factors and process variables. Together, the recent progress in manufacturing, properties characterization, and modeling of intricated physical and chemical processes that concur to the oxidation behavior led to development of powerful simulation codes able to analyze various scenarios of normal operation and hypothetical off-normal events, and thus to clearly specify the allowable parameters envelopes for the designers, constructors, and operators of current and future modular HTGRs. This review begins with an introduction on manufacturing methods, structure, and properties of nuclear graphite, including basic requirements that this specialty graphite type must satisfy for nuclear use. It continues with a chapter on environmental effects on nuclear graphite, where emphasis is placed less on irradiation and much more on oxidation phenomena, their safety implications, and the basic traits of chronic and acute oxidation by air (oxygen) and water (humidity, steam). Particular attention is placed on the three graphite grades of interest for this document (IG-110, NBG-18, PCEA). A chapter on properties degradation induced by oxidation follows, with focus on density, dimensional, and mechanical properties changes. The next chapter is intended as a brief review of various approaches used for modeling of graphite oxidation behavior. It summarizes the progress of oxidation models, from the early attempts to complex computational approaches interfaced with specialized computer codes designed for nuclear reactor simulations. Last, a list is presented of knowledge gaps where more research is needed. A short summary concludes the review.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Ultrathin epitaxial MgB 2 on SiC: Substrate surface-polarity-dependent properties

High-quality, ultrathin superconducting films are required for advanced devices such as hot-electron bolometers, superconducting nanowire single-photon detectors, and quantum applications. Using hybrid physical-chemical vapor deposition, we show that MgB 2 films as thin as 4 nm can be fabricated on the carbon-terminated 6⁢H-SiC (0001) surface with a superconducting transition temperature above 33 K and a rms roughness of 0.7 nm. Remarkably, the film quality is a function of the SiC surface termination, with the C-terminated surface preferred to the Si-terminated surface. To understand the MgB 2 thin film/SiC substrate interactions giving rise to this difference, we characterized the interfacial structures using Rutherford backscattering spectroscopy/channeling, electron-energy-loss spectroscopy, and x-ray photoemission spectroscopy. The MgB 2 /SiC interface structure is complex and different for the two terminations. Both terminations incorporate substantial unintentional oxide layers influencing MgB 2 growth and morphology, but with a different extent, intermixing, and interface chemistry. In this paper, we report measurements of transport, resistivity, and the critical superconducting temperature of MgB 2 /SiC that are different for the two terminations, and they link interfacial structure variations to observed differences. The result shows that the C face of SiC is a preferred substrate for the deposition of ultrathin superconducting MgB 2 films.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Oxyfluoride superlattices K Ta O 3 / K M F 3 ( M = Zn , Ni ) : Structural and electronic phenomena

The structural and electronic properties of KTaO 3 /KZnF 3 and KTaO 3 /KNiF 3 oxyfluoride superlattices are studied from first-principles density functional theory calculations. Here we highlight, that beyond a critical layer thickness, these systems exhibit an insulator to metal transition that gives rise to the appearance of two-dimensional electron and hole gas, confined both, due the band alignment, within the oxide layer. The origin of the insulator to metal transition is related to the polar discontinuity at the interfaces. The behavior is discussed in terms of a simple electrostatic model and compared to that of the prototypical LaAlO 3 /SrTiO 3 oxide system. The magnetic properties KTaO 3 /KNiF 3 superlattices are further discussed, revealing a sizable Rashba-type spin splitting at these interfaces, much larger than in similar oxide/oxide systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

Charge Disproportionation at Twisted SrTiO 3 Bilayer Interface Driven by Local Atomic Registry

The interplay of lattice, orbital, and charge degrees of freedom in complex oxide materials has hosted a plethora of exotic quantum phases and physical properties. Recent advances in the synthesis of freestanding complex oxide membranes and twisted heterostructures assembled from membranes provide diverse opportunities for discovery using moiré design with local lattice control. To this end, we designed moiré crystals at the coincidence site lattice condition, providing commensurate structure within the moiré supercell arising from the multiatom complex oxide unit cell. We fabricated such twisted bilayers from freestanding SrTiO 3 membranes and used depth-sectioning-based electron microscopic methods to investigate ordered charge states at the moiré interface. By selectively imaging SrTiO 3 atomic planes at different depths through the bilayer, we clearly resolved the moiré periodic structure at the twisted interface and found that it exhibits lattice-dependent charge disproportionation in the local atomic registry within the moiré supercell. Density functional modeling of the twisted oxide interface predicts that these moiré phenomena are accompanied by a two-dimensional flat band that can drive exceptional electronic phases. Our work provides a robust strategy for controlling moiré periodicity in twisted oxides and paves pathways to exploit the extraordinary functionalities via moiré lattice-driven charge-orbital correlation.

charge disproportionation↗