Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “complex aqueous solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development of Parameters for the Particle Size Distribution of TATB

Laser light scattering (LLS), manual counting of scanning electron microscopy (SEM) images, and reduction of SEM images using ImageJ (open source program) to determine Feret (caliper) diameters were applied to determine particle size distribution (PSD) of four preparations of 1,3,5‐triamino‐2,4,6‐trinitrobenzene (TATB) and yttria‐stabilized zirconia (YSZ), an SEM certified standard. Mie theory was used to reduce the LLS data. The spherical nature of the YSZ made it a good candidate for LLS. Variations in n , the refractive index, and iκ, the imaginary component, produced very little change in the PSD. However, changing the carrier liquid from H 2 O to a 40% aqueous sucrose solution, thereby changing the carrier refractive index, n 0 , substantially affected the PSD. The Mie complex refractive indices for the YSZ were n = 2.200, iκ = 0.100, with a 40% aqueous sucrose solution, n 0 = 1.400. The triclinic crystal structure of TATB made refractive index determinations more difficult, so a study was conducted varying Mie parameters and comparing them to the same data reduced using the Fraunhofer theory. Changing the n and κ parameters produced PSD with a small concentration of particles less than 1 µm in size or none in this range. SEM images, Feret data, manual counting, and Fraunhofer data reduction indicate particles less than 1 µm are probably < 5% in concentration. The final selection of Mie parameters for TATB was n = 2.283, iκ = 0.1, and suspension medium, n 0 = 1.330. Finally, computations, using density functional theory produced similar parameters.

Feret diameter↗
DOE OSTI2024

Nuclear Fuel and Pu Redox Studies from The Glenn T. Seaborg Institute at Idaho National Laboratory

The Glenn T. Seaborg Institute at Idaho National Laboratory (INL-GTSI) focuses on advancing fundamental research in the actinide sciences by providing unique opportunities to early career scientists and engineers to gain experience studying the actinide elements and their associated systems. The INL-GTSI is built from three focus areas that are based on the expertise and supporting infrastructure at INL and include solid state chemistry and physics, solution phase chemistry and physics, and forensic and isotope science. INL is the lead Laboratory for nuclear energy research and development in the U. S. and the research on nuclear fuels performed under the INL-GTSI gives good examples of solid state studies. Uranium-Molybdenum (U-Mo) alloys are leading fuel candidates for conversion of high performance research and test reactors to low-enriched fuels. During irradiation, generated fission gas accumulates into bubbles and self-organizes into a gas bubble superlattice (GBS) that effectively stores fission gases and inhibits fuel swelling. A study on the early self- organizing behavior of the GBS shows that not only grain boundaries but the interfaces between the U-Mo matrix and uranium carbide (UC) impurities are important to GBS formation.[1] In solution, understanding the complex redox behavior of plutonium in aqueous environments is critical for establishing optimized nuclear waste reprocessing solvent systems and storage tank environments. INL-GTSI researchers have produced an experimentally validated multi-scale model of the gamma radiation induced behavior of plutonium ions in concentrated aqueous HNO3 solutions.[2] Here, gamma radiation effected only minimal steady state changes in the redox distribution of the plutonium oxidation states. The redox cycling between Pu(IV) and Pu(III) is demonstrated to be mediated by the •OH/NO3• radical oxidation of Pu(III) and the H2O2/HNO3 driven reduction of Pu(IV). The INL-GTSI offers young researchers the unique chance to work directly with actinide bearing materials in a U. S. National Laboratory environment. Further topical areas of interest to the INL-GTSI include, but are not limited to, fundamental actinide properties, structure/property (electronic, magnetic, thermal) relations, actinide quantum criticality, f- electron interactions, electron correlations, computational studies, new phases, defect effects, interface interactions, isotope production and separation, forensic analytical chemistry, structure and dynamic properties of actinides in non-aqueous media, separations chemistry and kinetics for advanced nuclear fuel cycles, radiation effects, and innovative and advanced ligand design for complexation of the actinides.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Impacts of hydrogen bonding interactions with Np(v/vi)O 2 Cl 4 complexes: vibrational spectroscopy, redox behavior, and computational analysis

The neptunyl (Np(V)O 2 + /Np(VI)O 2 2+ ) cation is the dominant form of 237 Np in acidic aqueous solutions and the stability of the Np(V) and Np(VI) species is driven by the specific chemical constituents present in the system. Hydrogen bonding with the oxo group may impact the stability of these species, but there is limited understanding of how these intermolecular interactions influence the behavior of both solution and solid-state species. In the current study, we systematically evaluate the interactions between the neptunyl tetrachloride species and hydrogen donors in coordination complexes and in the related aqueous solutions. Both Np(V) compounds (N 2 C 4 H 12 ) 2 [Np(V)O 2 Cl 4 ]Cl (Np(V)pipz) and (NOC 4 H 10 ) 3 [Np(V)O 2 Cl 4 ] (Np(V)morph) exhibit directional hydrogen bonding to the neptunyl oxo group while Np(VI) compounds (NC 5 H 6 ) 2 [Np(VI)O 2 Cl 4 ] (Np(VI)pyr) and (NOC 4 H 10 ) 4 [Np(VI)O 2 Cl 4 ]·2Cl (Np(VI)morph) assemble via halogen interactions. Here, the Raman spectra of the solid-state phases indicate the activation of vibrational bands when there is asymmetry of the neptunyl bond, while these spectral features are not observed within the related solution phase spectra. Density functional theory calculations of the Np(V)pipz system suggest that activation of the ν 3 asymmetric stretch and other combination modes lead to additional complexity within the solid-state spectra. Electrochemical analyses of complexes in the solution phases are consistent with the results of the crystallization experiments as the voltammetric potentials of Np(V)/Np(VI) complexes in the presence of protonated heterocycles differ from the potentials of pure Np(V) and may correlate with the hydrogen bonding interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Temperature and salt controlled tuning of protein clusters

The formation of molecular assemblies in protein solutions is of strong interest both from a fundamental viewpoint and for biomedical applications. While ordered and desired protein assemblies are indispensable for some biological functions, undesired protein condensation can induce serious diseases. As a common cofactor, the presence of salt ions is essential for some biological processes involving proteins, and in aqueous suspensions of proteins can also give rise to complex phase diagrams including homogeneous solutions, large aggregates, and dissolution regimes. Here, we systematically study the cluster formation approaching the phase separation in aqueous solutions of the globular protein BSA as a function of temperature (T), the protein concentration (c p ) and the concentrations of the trivalent salts YCl 3 and LaCl 3 (c s ). As an important complement to structural, i.e. time-averaged, techniques we employ a dynamical technique that can detect clusters even when they are transient on the order of a few nanoseconds. By employing incoherent neutron spectroscopy, we unambiguously determine the short-time self-diffusion of the protein clusters depending on c p , c s and T. We determine the cluster size in terms of effective hydrodynamic radii as manifested by the cluster center-of-mass diffusion coefficients D. For both salts, we find a simple functional form D(c p , c s , T) in the parameter range explored. The calculated inter-particle attraction strength, determined from the microscopic and short-time diffusive properties of the samples, increases with salt concentration and temperature in the regime investigated and can be linked to the macroscopic behavior of the samples.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Aminopolycarboxylates in trivalent f-element separations

Aminopolycarboxylate reagents strongly bind a variety of metal ions. Trivalent f-elements are no exception. The formed complexes are very stable, especially when aminopolycarboxylate structure contains multiple aminoacetate groups. The efficient coordination of trivalent f-elements by these reagents prompted decades of research and development efforts devoted to separation and purification of f-block metal ions. This chapter overviews the fundamental and applied aspects of aminopolycarboxylate use in trivalent f-element separations. First, a brief synopsis on how the chemical properties of 4f and 5f metal ions determine their similar solution behavior is followed by a discussion of aqueous complexation as means to perturb it. The synthetic methodologies for preparation of aminopolycarboxylate complexants are discussed next. Fundamental features of trivalent f-element complexation by aminopolycarboxylates are summarized, focusing on a variety of structure-function relationships demonstrated for this class of chelators and theoretical efforts to accurately describe such coordination environments. Finally, historical accounts of aminopolycarboxylate use in 4f and 5f element separations are supplemented by recent advances in those research fields.

Jansone-Popova, Santa↗
DOE OSTI2025

Thermal properties and Thermodynamic Equilibrium Modeling of Cementitious Waste Forms

INTRODUCTION Cementitious matrices are used in the US DOE complex and worldwide to solidify aqueous radioactive, hazardous, mixed salt solutions, and sludges to meet low-level radioactive waste (LLW) disposal requirements. Blended formulations are used for most waste form mix designs. Substitution of pozzolans for Class F fly ash has the potential to alter the processing properties and stabilization properties of the resulting waste forms because they add chemical and mineralogical complexity to the final material. The Savannah River Site saltstone waste form was selected as the test case material. CemGEMS software was chosen as the model for predicting hydrated cementitious phases assemblages and phase evolution. Isothermal calorimetry was used as the method for evaluating processing and properties of fresh, uncured waste forms. The test cases consisted of reference case saltstone, and five natural pozzolan substituted saltstone mixes.

Bustamante, Michael E. [Savannah River National La↗
DOE OSTI2023

Layered catalyst structures and methods of making the same

A layered catalyst structure for purifying an exhaust gas stream includes a catalyst support and a palladium catalyst layer including an atomic dispersion of palladium ions electrostatically adsorbed onto an exterior surface of the catalyst support. The catalyst support includes an alumina substrate, a first ceria layer disposed on and extending substantially continuously over the alumina substrate, and a second colloidal ceria layer formed directly on the first ceria layer over the alumina substrate. The palladium catalyst layer is formed on the exterior surface of the catalyst support by applying a palladium-containing precursor solution to the exterior surface of the catalyst support and then heating the catalyst support and the palladium-containing precursor solution. The palladium-containing precursor solution includes a positively charged palladium complex in an aqueous medium and has a pH greater than a point of zero charge of the second colloidal ceria layer.

Gu, Yuntao↗
DOE OSTI2020

Versatile coating with multifunctional performance for solar steam generation

In this work, a new kind of material, composite complex coating (CCC), with multifunctional performance has been developed for solar steam generation. The CCC has many advantages: (a) Scalability. The fabrication process is facile and mild; it can be realized in aqueous solution at room temperature, without high pressure, toxic organic solvents, or complex equipment. (b) Cost-effectiveness. The reagents used for preparation of CCC are low-cost and readily available. (c) Universality and stability. CCC firmly adheres on surfaces of various substrates with diverse shapes (cotton, filter paper, wood, polyurethane sponge, and even chemically inert and highly hydrophobic polyvinylidene fluoride membranes), and can withstand rinsing treatment (3000 r/min for 96 h), cyclic frost-thaw test (-18 °C ⇌ 30 °C, 90 times), and both high and low pH environments. In addition, many other reported coatings, such as carbon black, fail under similar process strain. (d) Anti-crude oil-fouling property. The CCC possesses stable superhydrophilicity and underwater superoleophobicity, which collectively endow substrates with the ability to resist fouling by oils. (e) Broad and strong light absorption. CCC can transform various substrates with diverse shapes into black materials with broadband light absorption due to its d-d transitions and rough surface. Together, these properties of CCC enable substrates with nearly any structural design to be easily transformed into photothermal materials for efficient solar steam generation. Furthermore, as a proof of concept, poplar wood is treated with CCC, achieving a water evaporation rate of ~1.8 kg m-2 h-1 (one sun), which is a record among wood-based photothermal materials.

14 SOLAR ENERGY↗
DOE OSTI2024

Observation of a promethium complex in solution

Lanthanide rare-earth metals are ubiquitous in modern technologies, but we know little about chemistry of the 61st element, promethium (Pm), a lanthanide that is highly radioactive and inaccessible. Despite its importance, Pm has been conspicuously absent from the experimental studies of lanthanides, impeding our full comprehension of the so-called lanthanide contraction phenomenon: a fundamental aspect of the periodic table that is quoted in general chemistry textbooks. Here we demonstrate a stable chelation of the 147 Pm radionuclide (half-life of 2.62 years) in aqueous solution by the newly synthesized organic diglycolamide ligand. The resulting homoleptic Pm III complex is studied using synchrotron X-ray absorption spectroscopy and quantum chemical calculations to establish the coordination structure and a bond distance of promethium. These fundamental insights allow a complete structural investigation of a full set of isostructural lanthanide complexes, ultimately capturing the lanthanide contraction in solution solely on the basis of experimental observations. Our results show accelerated shortening of bonds at the beginning of the lanthanide series, which can be correlated to the separation trends shown by diglycolamides. The characterization of the radioactive Pm III complex in an aqueous environment deepens our understanding of intra-lanthanide behaviour and the chemistry and separation of the f-block elements.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Breaking the Neptunyl Barrier: Direct Access to Neptunium(IV) in Aqueous Solution via Polyoxometalate-Mediated Reduction and Stabilization

Neptunium exhibits truly unique chemistry as its speciation is dominated by the neptunyl(V) ion (NpO 2 + ). Here, in this study, we describe the spontaneous destabilization and reduction of neptunyl(V) via complexation to the Keggin-type polyoxometalate (POM) ligand PW 11 O 39 7– . The POM-mediated reduction of NpO 2 + does not require any reducing agent and occurs within minutes, at room temperature, and in aqueous solution. The resulting [Np(PW 11 O 39 ) 2 ] 10- complex (Np(PW 11 ) 2 ) remains soluble, water-stable, and air-stable for weeks and persists over an extended acidity range. Single-crystal structure, solid-state Raman and UV–visible absorbance characterization of Np(PW 11 ) 2 revealed a mixed alpha/beta isomery of the Keggin ion, forming an unprecedented 50:50 mixture of Np(α-PW 11 ) 2 and Np(α-PW 11 )(β-PW 11 ). Experiments with other tetravalent ions (i.e., Zr 4+ , Hf 4+ , Ce 4+ , and Th 4+ ) indicate that the occurrence of the beta isomer is specific to Np 4+ and independent of the cation’s size. Solution-state characterization of the Np-PW 11 system via UV-visible-NIR absorbance, 31 P NMR, VT NMR, and relaxometry further elucidated the speciation. Moreover, comparative experiments with uranium revealed that the two types of actinyl ions (UO 2 2+ vs NpO 2 + ) undergo drastically different reactions in the presence of PW 11 . UO 2 2+ is not reduced but instead uses PW 11 as a phosphate reservoir and precipitates as uranyl phosphate.

Hastings, Ashley M. [Lawrence Livermore National L↗
DOE OSTI2020

EXAFS investigations of temperature-dependent structure in cobalt-59 molecular NMR thermometers

Cobalt-59 nuclei are known for extremely thermally sensitive chemical shifts (δ), which in the long term could yield novel magnetic resonance thermometers for bioimaging applications. In this manuscript, we apply extended X-ray absorption fine structure (EXAFS) spectroscopy for the first time to probe the exact variations in physical structure that produce the exceptional thermal sensitivity of the 59 Co NMR chemical shift. We apply this spectroscopic technique to five Co(III) complexes: [Co(NH3)6]Cl3 (1), [Co(en) 3 ]Cl 3 (2) (en = ethylenediamine), [Co(tn) 3 ]Cl 3 (3) (tn = trimethylenediamine), [Co(tame) 2 ]Cl 3 (4) (tame = 1,1,1-tris(aminomethyl)ethane), and [Co(diNOsar)]Cl 3 (5) (diNOsar = dinitrosarcophagine). The solution-phase EXAFS data reveal increasing Co–N bond distances for these aqueous complexes over a ~50 °C temperature window, expanding by Δr (Co–N) = 0.0256(6) Å, 0.0020(5) Å, 0.0084(5) Å, 0.0006(5) Å, and 0.0075(6) Å for 1–5, respectively. Computational analyses of the structural changes reveal that increased connectivity between the donor atoms encourages complex structural variations. Finally, these results imply that rich temperature-dependent structural variations define 59 Co NMR thermometry in macrocyclic complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Gamma Radiation-Induced Degradation of Acetohydroxamic Acid (AHA) in Aqueous Nitrate and Nitric Acid Solutions Evaluated by Multiscale Modelling

Acetohydroxamic acid (AHA) has been proposed for inclusion in advanced, single-cycle, used nuclear fuel reprocessing solvent systems for the reduction and complexation of plutonium and neptunium ions. For this application, a detailed description of the degradation of AHA in dilute aqueous nitric acid is required. To this end, we present a comprehensive, multiscale computer model for the coupled radiolytic and hydrolytic degradation of AHA in aqueous sodium nitrate and nitric acid solutions. Rate coefficients for the reactions of AHA and HA with the oxidizing nitrate radical were measured for the first time using pulsed electron radiolysis and used as inputs in the kinetic model. The computer model results are validated by comparison to experimental data from steady state gamma irradiations, for which the agreement is excellent. Here, the presented model accurately predicts the yields of the major degradation products of AHA: acetic acid, hydroxylamine, nitrous oxide, and molecular hydrogen.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Effects of Anionic Polymer Modification of Dye‐Sensitized Niobate Photocatalysts on Solar‐Driven Z‐Scheme Overall Water Splitting

Pt‐intercalated calcium niobate nanosheets (Pt/HCa 2 Nb 3 O 10 ) sensitized by a Ru(II) complex dye are good photocatalysts for producing H 2 from aqueous solutions containing I − as a reversible electron donor. These materials are applicable to Z‐scheme overall water splitting in combination with a WO 3 ‐based O 2 ‐evolving photocatalyst under simulated sunlight. In this work, the effects of anionic polymer modification of the dye‐sensitized nanosheets are examined by adsorbing sodium poly(styrenesulfonate) (PSS), sodium polyacrylate, sodium polymethacrylate (PMA), or sodium poly(4‐styrenesulfonic‐ co ‐maleic acid) onto the dye‐sensitized nanosheet surface. For half‐cell H 2 ‐evolution reaction in the presence of NaI, all of the polymers have a positive impact on the activity under visible light at lower light intensity, whereas only PMA is effective under high light‐intensity condition. For Z‐scheme overall water splitting with PtO x /H‐Cs‐WO 3 , PSS and PMA give almost the same solar‐to‐hydrogen energy conversion efficiencies (0.12% ± 0.01%) under optimized conditions. However, PMA operates better than PSS at relatively low and high NaI concentrations, which are in general disadvantageous for the H 2 ‐ and O 2 ‐evolving components of the Z‐scheme, respectively.

Energy & Fuels↗
DOE OSTI2022

Neptunium (V) Solubility in the Presence and Absence of WIPP Relevant Ligands

CRA (Compliance Recertification Application)-2024 will update the oxidation state specific model used to calculate actinide solubility in the WIPP (Waste Isolation Pilot Plant). The pentavalent Np(V) ion is the most stable ion in solution within the An(V) series. This valence stability of Np(V) in aqueous solution makes Np a useful representative element for studying the aqueous complex chemistry of all An(V), but in the predicted WIPP scenario, this is the only TRU component that increases in the inventory with time as it is the main daughter product of 241 Am decay (alpha, n) so its relative importance increases throughout the 10,000-year performance period of the WIPP, it is only used to represent itself. This work is focused on confirming organic, borate and carbonate effects on solubility of Np(V) in WIPP simulated brines and 5 M NaCl and reassessing the predicted model speciation to strengthen the overall WIPP An(V) model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Editorial: Applications of spectroscopy and chemometrics in nuclear materials analysis

Optical analysis techniques, including spectroscopy and image analysis, have many advantages when applied to the study of nuclear materials. They require small sample sizes, can be performed remotely, and can be proceduralized through consistent practice. Most importantly, they provide a wealth of information by generating multivariate data. For example, ultraviolet–visible–near-infrared absorbance spectroscopy of actinides in aqueous and organic solutions is dependent on the oxidation state, anionic complexation, and temperature. These variables are important for solution-based separation processes, and sensitivity to these factors, combined with online monitoring, can drive the efficiency and control of these processes. The morphology and chemical composition of actinide particles can also provide a vital clue to the mechanisms by which the particles were formed, providing forensic information on the origins of the particles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Crystalline phase transitions and water-soluble complexes of copper(Ⅰ) 2-hydroxyethanethiolate

We report the coordination polymer copper(I) 2-hydroxyethanethiolate, (CuSCH 2 CH 2 OH) n , though insoluble in all common solvents, dissolved readily in basic aqueous solutions of the thiolate anion (HOCH 2 CH 2 S – ) of 2-mercaptoethanol to form a single species: the tetranuclear cluster [Cu 4 (μ-SCH 2 CH 2 OH) 6 ] 2– . From this solution were grown X-ray quality single crystals of copper(I) 2-hydroxyethanethiolate. This compound underwent a hitherto unknown crystal phase transition at ca. 6 °C, from point group P2 1 2 1 2 1 to Pna2 1 , with noticeable changes in the geometry of the Cu-S layer and in the orientation of the alkylthiolate side chains. When the bulky base tetrabutylammonium hydroxide was employed in the aqueous thiolate solution used to dissolve (CuSCH 2 CH 2 OH) n , the water-soluble polynuclear copper(I) complex bis(tetrabutylammonium) hexakis(μ-2-hydroxyethanethiolato) tetracuprate(I), [(C 4 H 9 ) 4 N] 2 [Cu 4 (μ-SCH 2 CH 2 OH) 6 ], could be isolated as X-ray quality crystals. Structural characterization of this complex revealed a tetrahedral arrangement of copper(I) centers with thiolates bridging the edges of the tetrahedra. On standing, this complex degraded to a larger polynuclear Cu(I) sulfide cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The inorganic chemist's guide to actinide radiation chemistry: a review

This review aims to provide an overview of the current state of radiation chemistry with respect to the actinide elements, thorium through californium. Despite the inherent radioactivity of the actinides, only a few studies explore the effects of ionizing radiation on their redox chemistry and surrounding environment. This fundamental knowledge gap, coupled with the current renaissance in actinide-based technologies such as nuclear power, space exploration, and medicine, underscores the importance of research in this interdisciplinary area. This review will focus on the interactions between reactive species formed by radiolysis with actinides and their complexes, offering an inorganic chemist's perspective on research in radiation chemistry. In addition, a thorough discussion of our current understanding of radiation-induced changes in actinide speciation in both aqueous solution and the solid-state will be provided, focusing on changes in oxidation state distribution, complexation, and secondary coordination effects within inorganic materials. Finally, this review will discuss challenges and opportunities for inorganic chemists to explore this unique intersection of fields.

Actinides↗
DOE OSTI2021

The solubility of thorium in carbonate-bearing solutions at hydrothermal conditions

Thorium mineralization is frequently hosted in carbonate-bearing rocks, and thorium commonly substitutes into the structures of carbonate-bearing minerals that have precipitated from or been modified by hydrothermal fluids. Given this common association, it is reasonable to consider the hypothesis that the presence of carbonate ligands in hydrothermal solutions promotes the transport of Th through the formation of stable aqueous complexes. Our ability to evaluate this hypothesis, however, is hindered by the lack of experimental data for Th-carbonate species at conditions beyond ambient. The low-temperature data indicate that carbonate is a strong complexing agent for Th. In this contribution, we investigate the solubility of Th in carbonate-bearing fluids relevant to natural systems (0.05–0.5 m NaHCO 3 /Na 2 CO 3 ; pH T ~ 7.8–9.8) at elevated temperature (175–250 °C). We demonstrate that, in contrast to the behavior of Th at low temperature, the stability of Th-carbonate complexes is not sufficient for them to predominate at these conditions. Instead, the solubility of Th is governed by hydrolysis reactions. Under the experimental conditions investigated, the predominant hydroxyl complexes are Th(OH) 4 0 and Th(OH) 5 -. Furthermore, thermodynamic formation constants were derived for these species at the temperatures considered in our experiments (log β 4 = 43.34 and 44.31 at 175 and 200 °C, respectively, and log β 5 = 46.15 and 47.9 at 225 and 250 °C, respectively) to permit forward modeling of Th mobility in natural systems. Our study indicates that carbonate ions are unlikely to play a role in transporting Th in hydrothermal fluids. Summarizing the results of this study and our previous studies of the solubility of Th in hydrothermal fluids, we conclude that SO 4 2- is the primary ligand responsible for the hydrothermal transport of Th.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗