Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “comminution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Mineralogy and origin of Fra Mauro fines and breccias.

Textural features, glassy spherule and glassy aggregate contents, and size-frequency distributions of lithic components of the regolith fines indicate that the Fra Mauro regolith of the smooth terrain is a highly reworked accumulation of debris derived primarily by impact comminution of annealed breccias. Analyses of the glassy spherules suggest that mare-derived debris must amount to less than 5% of the regolith, but exotic materials having the composition of the Fra Mauro breccias (highland-like) cannot be recognized. Breccia samples from the Fra Mauro site include (1) regolith breccias derived by lithification of local regolith material, (2) texturally and compositionally unique white rock breccias that may have been derived from ancient ejecta buried beneath the Fra Mauro formation, and (3) annealed breccias that are excavated samples of the Fra Mauro formation. The latter were deposited as heated impact ejecta, probably by avalanches produced by the Imbrian event and were annealed in situ in a thermal regime perhaps equivalent to that responsible for the pyroxene-hornfels facies of metamorphism in terrestrial rocks.

Quaide, W.↗
NASA NTRS1973

Lunar soil grain size distribution

A comprehensive review has been made of the currently available data for lunar grain size distributions. It has been concluded that there is little or no statistical difference among the large majority of the soil samples from the Apollo 11, 12, 14, and 15 missions. The grain size distribution for these soils has reached a steady state in which the comminution processes are balanced by the aggregation processes. The median particle size for the steady-state soil is 40 to 130 microns. The predictions of lunar grain size distributions based on the Surveyor television photographs have been found to be quantitatively in error and qualitatively misleading.

Carrier, W. D., III↗
NASA NTRS1973

The distribution in lunar soil of carbon released by pyrolysis

The carbon contents of various lunar soil particle types and sieve fractions of Apollo 15 and 16 samples have been determined by the pyrolysis method. The mineral, glass, and high-grade breccia fragments in the soils examined contain relatively low amounts of carbon (approximately 8, 25, and 25 microg C/g sample respectively in 149-250 micron grains). Most low-grade breccias and all agglutinates examined have high carbon contents (approximately 52 and 80 microg C/g sample respectively), and agglutinate abundance is indicative of the carbon content and maturity of a soil. The distribution of carbon with respect to particle size in mature soils generally reveals a minimum in carbon content at about 100 micron particle diameter. At smaller particle diameters, carbon content is directly proportional to particle surface area and therefore increases with the ratio (surface area)/(particle mass). A model relating the cycle of comminution and aggregation of soil particles to the redistribution of surface implanted carbon is developed.

Desmarais, D. J.↗
NASA NTRS1975

Lunar polymict breccia 14321 - A compositional study of its principal components

Forty-nine sub-samples of the polymict breccia 14321,184 have been excavated from the rock and analyzed by instrumental activation analysis techniques, specially modified to allow examination of small samples. Two distinct types of microbreccia clasts were analysed. A mare-type basalt of unusual composition is present as several discrete clasts. Mixing models for the clastic components of the breccia illustrate that at least three stages of assembly may be distinguished on compositional grounds. The first was at a site such that KREEP-rich materials dominated the clastic rocks formed, although a variety of lithic fragments were apparently present. The second assembly stage may have been primarily that of comminution and mixing of the more primitive materials, with addition of mare-type basalt clasts. The third stage saw addition of clasts of 14321-type basalt. In the final assembly stage, the light matrix was apparently formed entirely by mutual abrasion of the pre-existing clasts, resulting in little or no change in bulk composition.

Duncan, A. R.↗
NASA NTRS1975

Early scattering by Jupiter and its collision effects in the terrestrial zone

When Jupiter was on the order of three to ten earth masses in size, there undoubtedly was a considerably larger mass of condensed matter in its zone, since Jupiter would have perturbed most of it to other parts of the solar system. Monte Carlo studies indicate a significant portion would have crossed the earth's orbit. If the earth and moon had not yet fully formed, the probability of earth-zone planetesimals being hit by this Jupiter-scattered material was high. Further Monte Carlo models of these collisions and their products indicate a significant portion of matter was heated to melting, even if less than 5% of the relative kinetic energy went into heat. The models include capture probabilities by an embryo earth and a protolunar swarm. Because heat energy is correlated with comminution energy, and because the capture probability of the swarm is mass-dependent while embryo's is not, the protolunar material suffered much higher heating on the average than did the proto-earth material.

Kaula, W. M.↗
NASA NTRS1974

Accumulation and isotopic evolution of carbon on the lunar surface

The processes of hydrogen stripping, agglutination and impact comminution, acting upon a regolith containing both indigenous and solar wind-implanted carbon, provide a quantitative explanation for the relationship between carbon abundance and isotopic composition observed for Apollo 16 soils.

Kerridge, J. F.↗
NASA NTRS1975

Petrology of lunar soils

The paper summarizes the physical and petrographic characteristics of the finer-grained fractions (less than 1 cm) of lunar regolith soil in Apollo and Luna samples. Lunar soils are poorly sorted and consist mostly of lithic and mineral debris derived by impact comminution of the underlying bedrock and glass particles formed by impact melting. Agglutinates constitute an important soil component and are key factors in the genetic history of lunar soil. Some models concerning the development of lunar regolith based on soil studies are examined.

Heiken, G.↗
NASA NTRS1975

Development of the mare regolith - Some model considerations

This investigation uses results obtained in an earlier Monte Carlo study by Oberbeck et al. (1973) to shed light on the consequences of mare-regolith origin by impact comminution of primarily local basaltic rocks by evaluating regolith growth and mixing as a function of time. The study demonstrates that regolith growth is self-regulated and has the same trend and nearly the same terminal growth rates whatever the history of bombardment: rapid initial accumulation followed by diminishing rates of growth. Mixing and all other processes investigated are growth regulated. Mixing increases as growth slows, but never to the extent that the regolith is homogenized. Because the average regolith is never homogenized, products of growth-regulated processes are preserved in the stratigraphy. This model indicates that deeper levels contain thinner depositional units, lesser quantities of meteoritic and exotic components, and more debris derived from shallow levels in the mare basalts than material in near-surface layers.

Quaide, W.↗
NASA NTRS1975

A lunar soil evolution model

Comminution, agglutination, and replenishment processes in a lunar soil are modeled by a system of time-dependent linear differential equations. In the model, a soil is subdivided into coarse-particle, fine-particle, and agglutinate fractions. The relative mass abundance of each component in a mature soil is found to be proportional to rates for the reworking processes. Evolution of the grain-size distribution from a fresh ejecta blanket to a mature soil is described quantitatively in terms of the changing proportions of the three soil constituents. If size data are available for an immature soil and a mature soil of the same system, rates for the various processes can be calculated under certain simplifying assumptions.

Mendell, W. W.↗
NASA NTRS1976

Sample preparation of metal alloys by electric discharge machining

Electric discharge machining was investigated as a noncontaminating method of comminuting alloys for subsequent chemical analysis. Particulate dispersions in water were produced from bulk alloys at a rate of about 5 mg/min by using a commercially available machining instrument. The utility of this approach was demonstrated by results obtained when acidified dispersions were substituted for true acid solutions in an established spectrochemical method. The analysis results were not significantly different for the two sample forms. Particle size measurements and preliminary results from other spectrochemical methods which require direct aspiration of liquid into flame or plasma sources are reported.

Chapman, G. B., II↗
NASA NTRS1976

Apollo 14 and 16 Active Seismic Experiments, and Apollo 17 Lunar Seismic Profiling

Seismic refraction experiments were conducted on the moon by Apollo astronauts during missions 14, 16, and 17. Seismic velocities of 104, 108, 92, 114 and 100 m/sec were inferred for the lunar regolith at the Apollo 12, 14, 15, 16, and 17 landing sites, respectively. These data indicate that fragmentation and comminution caused by meteoroid impacts has produced a layer of remarkably uniform seismic properties moonwide. Brecciation and high porosity are the probable causes of the very low velocities observed in the lunar regolith. Apollo 17 seismic data revealed that the seismic velocity increases very rapidly with depth to 4.7 km/sec at a depth of 1.4 km. Such a large velocity change is suggestive of compositional and textural changes and is compatible with a model of fractured basaltic flows overlying anorthositic breccias. 'Thermal' moonquakes were also detected at the Apollo 17 site, becoming increasingly frequent after sunrise and reaching a maximum at sunset. The source of these quakes could possibly be landsliding.

Source record↗
NASA NTRS1975

Experimental hypervelocity impact into quartz sand - Distribution and shock metamorphism of ejecta

Results are presented for vertical impacts of 0.3-g cylindrical plastic projectiles into noncohesive quartz sand in which vertical and horizontal reference strate were employed by using layers of colored sand. The impacts were performed at velocities of 5.9-6.9 km/sec with a vertical gun ballistic range. The craters, 30-33 cm in diameter, reveal a radial decay of the ejecta mass per unit area with a power of -2.8 to -3.5. Material displaced from the upper 15% of the crater depth d is represented within the whole ejecta blanked, material from deeper than 28% of d is deposited inside 2 crater radii, and no material from deeper than 33% of d was ejected beyond the crater rim. Shock-metamorphosed particles (glassy agglutinates, cataclastic breccias, and comminuted quartz) amount to some 4% of the total displaced mass and indicate progressive zones of decay of shock intensity from a peak pressure of 300 kbar. The shock-metamorphosed particles and the shock-induced change in the grain size distribution of ejected samples have close analogies to the basic characteristics of the lunar regolith. Possible applications to regolith formation and to ejecta formations of large-scale impact craters are discussed.

Stoeffler, D.↗
NASA NTRS1975

Integrated investigation of the mixed origin of lunar sample 72161,11

The comminution-agglutination model and the solar-wind implantation-retention model are used to postulate the origins of the particulate components of lunar sample (72161,11), a submillimeter fraction of a surface sample for the dark mantle regolith at LRV-3. Grain-size analysis was performed by wet sieving with liquid argon, and analyses for CO2, CO, CH4, and H2 were carried out by stepwise pyrolysis in a helium atmosphere. The results indicate that the present sample is from a mature regolith, but the agglutinate content is only 30% in the particle-size range between 90 and 177 microns, indicating an apparent departure from steady state. Analyses of the carbon, methane, and hydrogen concentrations in size fractions larger than 149 microns show that the volume-correlated component of these species increases with increased grain size. It is suggested that the observed increase can be explained in terms of mixing of a dominant local population of coarser agglutinates having high carbon and hydrogen concentrations with an imported population of finer agglutinates relatively poor in carbon and hydrogen.

Basu, A.↗
NASA NTRS1976

Thermal regimes in cratered terrain with emphasis on the role of impact melt

The distribution of bombardment energy in the moon's crust and the types of phase transformation resulting from this energy input are investigated. It is seen that the major significance of impact melts in the period of intense cratering is that they transfer most of the high-temperature heat following cratering and thus take part in many of the phase transformations on planetary surfaces. Energy partitioning studies suggest that of the projectiles' total kinetic energy, 23 to 35% is converted into heat by passage of the shock fronts, 43 to 53% transports ejecta and then is dissipated at modest temperature increases over a broad area, 8 to 24% is consumed comminuting country rock, and less than 1% becomes seismic and radiant energy. Subsequent to its formation, the melt is violently mixed with much colder debris to form the sheets of impact melt and the breccias.

Simonds, C. H.↗
NASA NTRS1977

Ar-40 intercept values and young apparent /K-40/-/Ar-40/ ages of five Apollo 15 fines

Correlations between Ar-40 and Ar-36 from size fractions of three Apollo 15 fines (15071, 15421, 15501) have been obtained. The Ar-40 intercept values of these fines and of 15091 and 15601 are generally lower than what one would expect for fines resulting from the comminution of rocks having ages of about 3.3 billion yr, typical for basalts of the landing site. This is interpreted to be the result of contamination by ray material from the Copernican age (equal or less than about 1 billion yr) craters, Autolycus and Aristillus, north of the landing site.

Jordan, J. L.↗
NASA NTRS1977

Test of a model for trace element partition during closed-system solidification of a silicate liquid

Trace-element concentrations in separated minerals and rock fragments from a coarsely crushed and sieved sample of medium-grained lunar basalt are determined by high-precision instrumental neutron activation analysis for three main purposes. These are: (1) to test a previously proposed model for describing trace-element behavior during solidification of a silicate liquid under conditions of a closed system; (2) to compare trace-element concentrations among different size fractions of a comminuted basalt; and (3) to investigate small-scale heterogeneity within a single medium-grained basalt. It is found that an excellent mass balance for the whole rock is attained in terms of the trace-element concentrations of the component minerals and mesostasis, that the mixing model describing this mass balance yields a superior modal analysis for the whole rock, and that different size fractions of the coarsely crushed basalt vary in mineral composition. The closed-system model is shown to account properly for the average behavior of the trace elements during solidification of the basalt, and values of distribution coefficients are obtained for incompatible elements in that rock.

Haskin, L. A.↗
NASA NTRS1968

Apparatus for handling micron size range particulate material

An apparatus for handling, transporting, or size classifying comminuted material was described in detail. Electrostatic acceleration techniques for classifying particles as to size in the particle range from 0.1 to about 100 microns diameter were employed.

Friichtenicht, J. F.↗
NASA NTRS1977

Impact cratering and regolith dynamics

The most recent models concerning mechanical aspects of lunar regolith dynamics related to impact cratering use probabilistic approaches to account for the randomness of the meteorite environment in both space and time. Accordingly the absolute regolith thickness is strictly a function of total bombardment intensity and absolute regolith growth rate in nonlinear through geologic time. Regoliths of increasing median thickness will have larger and larger proportions of more and more deep seated materials. An especially active zone of reworking on the lunar surface of about 1 mm depth has been established. With increasing depth, the probability of excavation and regolith turnover decreases very rapidly. Thus small scale stratigraphy - observable in lunar core materials - is perfectly compatible with regolith gardening, though it is also demonstrated that any such stratigraphy does not necessarily present a complete record of the regolith's depositional history. At present, the lifetimes of exposed lunar rocks against comminution by impact processes can be modeled; it appears that catastrophic rupture dominates over single particle abrasion.

Hoerz, F.↗